{"title":"A Lower-Power Viterbi Decoder Design Methodology Based on Dynamic Survivor Path Decision","authors":"Yun-Nan Chang, Yu-Chung Ding","doi":"10.1109/VDAT.2006.258173","DOIUrl":"https://doi.org/10.1109/VDAT.2006.258173","url":null,"abstract":"In this paper, a low-power design of Viterbi decoders has been proposed based on a novel survivor path trace mechanism. By incorporating the dynamic multiple path convergence scheme, the survivor path can be determined at earlier stage such that the overall survivor memory access can be reduced. The experimental results show that the average memory reference can be reduced up to more than 30% for digital video broadcasting (DVB) application at high signal-to-noise ratio. The bit-error-rate (BER) performance of the proposed approach can be even better in some cases. This approach can lead to the reduction of power since memory operation is considered as the major power consumption of the entire decoders. An efficient VLSI architecture of Viterbi decoder for DVB standard is also presented based on the proposed design methodology. One salient feature of this architecture is that the survivor memory can be implemented by using only three single-port memory banks","PeriodicalId":356198,"journal":{"name":"2006 International Symposium on VLSI Design, Automation and Test","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130379580","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"The HOY Tester-Can IC Testing Go Wireless?","authors":"Cheng-Wen Wu, Chih-Tsun Huang, Shi-Yu Huang, Po-Chiun Huang, Tsin-Yuan Chang, Yu-Tsao Hsing","doi":"10.1109/VDAT.2006.258155","DOIUrl":"https://doi.org/10.1109/VDAT.2006.258155","url":null,"abstract":"Test cost is becoming a more and more significant portion of the cost structure in advanced semiconductor products. To address this issue, we propose HOY - a novel wireless test system with enhanced embedded test features. We present the concept, architecture, and test flow for future semiconductor products tested by HOY. Necessary technologies for the success of HOY also are presented, though most of which require further investigation. A preliminary demonstration system has been constructed, and experiments are being conducted","PeriodicalId":356198,"journal":{"name":"2006 International Symposium on VLSI Design, Automation and Test","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128241594","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A Power Efficient and Fast Transient Response Low Drop-Out Regulator in Standard CMOS Process","authors":"Chung-Wei Lin, Yen-Jen Liu","doi":"10.1109/VDAT.2006.258163","DOIUrl":"https://doi.org/10.1109/VDAT.2006.258163","url":null,"abstract":"In this paper a low drop out regulator (LDO) is proposed, which can adaptively change driving current to the PMOS gate and have a fast transient response time. As we know, LDO circuits have to provide a regulated output voltage regardless of input voltage variation, load current variation, and process variation. A load transient test will test the transient behavior of changing output loading. In order to get a good performance in a load transient testing, a buffer with current driving capability is usually added in front of PMOS gate to make the transient response faster. This buffer needs to drive the PMOS gate, and it will consume a few quiescent current in LDO circuits. This static quiescent current will occupy a few percentage of power consumption of LDO circuits at a light load condition, and the efficiency of the LDO at a light load condition will be very poor. In this paper, we proposed a new architecture of LDO, which can adaptively change the driving current of the buffer to the PMOS gate. Then we can improve the efficiency of the LDO up to 10% at light load condition. Meanwhile, we can have a fast transient response time. The load transient response time from 1mA to 138mA is about 2mus, which is faster than other reference designs. This chip is manufactured in 0.35mum standard CMOS process, and it consumes 24muA in a light load condition","PeriodicalId":356198,"journal":{"name":"2006 International Symposium on VLSI Design, Automation and Test","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125911164","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Hsien-Ku Chen, J. Sha, D. Chang, Y. Juang, Chin-Fong Chiu
{"title":"A Merged LNA-Mixer Design with On-Chip Balun","authors":"Hsien-Ku Chen, J. Sha, D. Chang, Y. Juang, Chin-Fong Chiu","doi":"10.1109/VDAT.2006.258184","DOIUrl":"https://doi.org/10.1109/VDAT.2006.258184","url":null,"abstract":"In this paper, the design and application of an on-chip transformer balun for RFIC has presented. Single-ended primary and differential secondary are constructed without using three individual windings for simple layout. Besides, this new topology has the same physical common visual ground point for second winding, which eliminates imbalance due to potential difference at the ground from conventional trifilar. Furthermore, this new on-chip balun is successfully applied to the integration of 5.8-GHz LNA-mixer implemented on SiGe 0.35-mum BiCMOS process then achieves 4.15-dB noise figure (NF), 34.61-dB conversion gain, and -9.5-dBm input third-order intercept-point with low power consumption of 9-mW","PeriodicalId":356198,"journal":{"name":"2006 International Symposium on VLSI Design, Automation and Test","volume":"413 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123506696","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"DFM in Perspective - A Challenge and Opportunity in Nanometer Era -","authors":"Shimohigashi","doi":"10.1109/VDAT.2006.258107","DOIUrl":"https://doi.org/10.1109/VDAT.2006.258107","url":null,"abstract":"Summary form only given. The old good days, when the process and the design engineers were in each technology silo and didn't need to interact frequently, have gone. As the device size shrinks to nanometer scale and the integration level exceeds well over giga scale, the landscape of technology developments has become very different from the past. The variability, for example, becomes a critical issue not only for performance, but also for production yield. The problems, which have been seen as secondary for long time, suddenly come into play and will grow according to the device size reduction. The solution is DFM, design for manufacturing. The DFM will not be done without collaborations between various technology parties, such as process, design, mask, EDA, and so on. The DFM will give us a big challenge and opportunity in nanometer era. In this talk, the perspective of the DFM was presented and how the work-flow for making chips should be changed was discussed. The DFM initiative under a collaborative consortium scheme in Japan were also presented","PeriodicalId":356198,"journal":{"name":"2006 International Symposium on VLSI Design, Automation and Test","volume":"9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126663632","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Sleep Transistor Design and Implementation - Simple Concepts Yet Challenges To Be Optimum","authors":"K. Shi, D. Howard","doi":"10.1109/VDAT.2006.258121","DOIUrl":"https://doi.org/10.1109/VDAT.2006.258121","url":null,"abstract":"Optimum sleep transistor design and implementation are critical to a successful power-gating design. This paper describes a number of critical considerations for the sleep transistor design and implementation including header or footer switch selection, sleep transistor distribution choices and sleep transistor gate length, width and body bias optimization for area, leakage and efficiency","PeriodicalId":356198,"journal":{"name":"2006 International Symposium on VLSI Design, Automation and Test","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130207050","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A Multi-Code Compression Technique for Reducing System-On-Chip Test Time","authors":"Hong-Ming Shieh, Chun-Shien Wu, Jin-Fu Li","doi":"10.1109/VDAT.2006.258169","DOIUrl":"https://doi.org/10.1109/VDAT.2006.258169","url":null,"abstract":"With the nano-scale technology, a system-on-chip (SOC) design may consist of many reusable cores from multiple sources. This causes the complexity of SOC testing is much higher than testing conventional VLSI chips. One of the test challenges of SOCs is test data reduction. This paper presents a multi-code compression (MCC) technique to reduce the volume of test data and the test application time. A multi-code decompressor for recovering the compressed test data is also proposed. Experimental results show that the MCC scheme can achieve higher compression ratio than the single-code compression schemes. The area cost of the multi-code decompressor is small - only about 3498mum2 based on TSMC 0.18mum standard cell technology","PeriodicalId":356198,"journal":{"name":"2006 International Symposium on VLSI Design, Automation and Test","volume":"9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128542842","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Power-Gating Schemes for Ultra-Thin SOI (UTSOI) Circuits in Hybrid SOI-Epitaxial CMOS Structures","authors":"S. Lo, K. Das, C. Chuang, J. Sleight","doi":"10.1109/VDAT.2006.258120","DOIUrl":"https://doi.org/10.1109/VDAT.2006.258120","url":null,"abstract":"Several novel schemes of implementing MTCMOS circuits in hybrid UTSOI-epitaxial CMOS structures are proposed and analyzed through comprehensive circuit simulations. The schemes offer intrinsic high circuit density and facilitate header/footer body biasing techniques for performance enhancement and leakage reduction. The effectiveness in improving active-mode performance, and reducing virtual supply bounce and standby leakage power is demonstrated","PeriodicalId":356198,"journal":{"name":"2006 International Symposium on VLSI Design, Automation and Test","volume":"269 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116162598","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
S. Jang, Yun-Hsueh Chuang, Chien-Keng Lee, Shao-Hua Lee
{"title":"A 4.8GHz Low-Phase Noise Quadrature Colpitts VCO","authors":"S. Jang, Yun-Hsueh Chuang, Chien-Keng Lee, Shao-Hua Lee","doi":"10.1109/VDAT.2006.258185","DOIUrl":"https://doi.org/10.1109/VDAT.2006.258185","url":null,"abstract":"A 4.8GHz low-noise quadrature Colpitts VCO is presented. Use of the current switching differential Colpitts configuration together with super harmonic coupling scheme for quadrature signal generation ensures low phase noise operation. The advantage of proposed differential VCO is analyzed in terms of power consumption, phase noise, and figure of merit. The QVCO has been fabricated with the 0.18-m TSMC CMOS technology for 4.8GHz band operation and the obtained phase noise is -120 dBc/Hz at 1MHz offset frequency while 7mA current consumption and 12.6mW power consumption from 1.8V power supply","PeriodicalId":356198,"journal":{"name":"2006 International Symposium on VLSI Design, Automation and Test","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127396497","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"On Feasibility of HOYߞA Wireless Test Methodology for VLSI Chips and Wafers","authors":"Po-Kai Chen, Yu-Tsao Hsing, Cheng-Wen Wu","doi":"10.1109/VDAT.2006.258170","DOIUrl":"https://doi.org/10.1109/VDAT.2006.258170","url":null,"abstract":"As we enter the deep submicron age, it is getting harder for traditional test equipments to catch up with the increasing speed, pin count, and parameter accuracy of new products. The rapid growth of test cost for semiconductor chips and wafers thus has become a wide concern. To solve this issue, we propose HOY - a novel wireless test system. HOY is under development, but preliminary feasibility study has been done. In this paper we present some economics models and simulation results, which show that HOY will be much more cost-effective than traditional testers","PeriodicalId":356198,"journal":{"name":"2006 International Symposium on VLSI Design, Automation and Test","volume":"7 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127547032","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}