Multibody System Dynamics最新文献

{"title":"Numerical simulation of the post-derailment behaviour of a railway vehicle and its interaction with the infrastructure","authors":"Matteo Santelia, Francesco Mazzeo, Riccardo Rosi, Egidio Di Gialleonardo, Stefano Melzi, Stefano Bruni","doi":"10.1007/s11044-024-09990-4","DOIUrl":"https://doi.org/10.1007/s11044-024-09990-4","url":null,"abstract":"<p>Train derailments may have catastrophic consequences, and therefore suitable measures should be designed and installed at specific safety-relevant sites to mitigate their effects. Mitigation measures, such as guard rails and containment walls, aim at restraining the motion of the derailed vehicle using suitable derailment containment devices. However, the design and structural sizing of these devices is challenging as the quantification of the loads caused by the impact with the vehicle is complex.</p><p>The aim of this paper is to extend previous work from the same authors aimed at defining a non-linear multi-body model for the simulation in time-domain of the post-derailment behaviour of a railway vehicle and the impact on a derailment containment wall. The extension presented in this paper is concerned with the model of the interaction of the derailed vehicle with the sleepers and with the ballast. To this aim, an algorithm is introduced to manage the different possible contact conditions the wheels of the vehicle may undergo during the derailment process: contact with the rail, with the sleepers and with the ballast. Then, a model of the impact between the derailed wheels and the sleepers is introduced, and a terramechanic model defining the forces acting on the wheels sinking in the ballast is established. The effect of the accurate modelling of forces exchanged by the derailed wheels with the sleepers and the ballast is quantified for a relevant derailment scenario and shown to be highly relevant to the estimation of the impact loads applied to the containment structure.</p>","PeriodicalId":49792,"journal":{"name":"Multibody System Dynamics","volume":"27 1","pages":""},"PeriodicalIF":3.4,"publicationDate":"2024-05-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140926863","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Review and comparison of empirical friction coefficient formulation for multibody dynamics of lubricated slotted joints","authors":"Marco Cirelli, Matteo Autiero, Nicola Pio Belfiore, Giovanni Paoli, Ettore Pennestrì, Pier Paolo Valentini","doi":"10.1007/s11044-024-09988-y","DOIUrl":"https://doi.org/10.1007/s11044-024-09988-y","url":null,"abstract":"<p>In recent times, many industrial applications have demanded innovative energy-efficient solutions. One of the main causes of energy loss is due to friction between body surfaces in contact. A great amount of research has been aimed at understanding the friction mechanisms to allow for its reliable prediction during multibody simulation. In the 1950s and 1960s, many experimental studies were carried out, leading to the coefficient of friction formulas for lubricated surfaces under a combination of sliding and rolling relative motion. The formulas have been mainly derived by the mathematical fitting of results obtained from experimental measurements on rolling disks and different load, lubricating and kinematic conditions. The purpose of this paper is twofold: on the one hand, it reviews semi-empirical formulas for computing the friction coefficient in lubricated contact under various operating conditions; on the other hand, it implements and compares contact force models coupled with the metal-metal lubricated empirical friction formulas in a multibody dynamics simulation environment. Implementing empirical formulas is straightforward and computationally efficient, but one can evaluate the performance of these models in characterizing the dynamics of the lubricated joint. For this purpose, a multibody simulation of a Scotch yoke and a Whitworth quick return mechanisms with a nonideal prismatic joint are conducted. The existence of clearance causes the dynamic behavior of the system to be different from the ideal joint. The difference between each friction coefficient model is emphasized by simulation output and computation time.</p>","PeriodicalId":49792,"journal":{"name":"Multibody System Dynamics","volume":"21 1","pages":""},"PeriodicalIF":3.4,"publicationDate":"2024-05-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140926861","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Comparison between quasi-static and multibody dynamic simulations for wheel-rail contact analysis","authors":"P. A. P. Pacheco, P. G. Ramos, T. L. Sá, G. F. M. Santos, A. Gay Neto, A. A. Santos","doi":"10.1007/s11044-024-09979-z","DOIUrl":"https://doi.org/10.1007/s11044-024-09979-z","url":null,"abstract":"<p>Rails experience contact with a range of wheel profiles that pummel their surface at different points and with different intensities. This work compares two methods for evaluating pummeling analyzes for the wheel-rail interaction: simplified quasi-static model and multibody dynamics simulations. The first is solved with the GIRAFFE program and simulates the interaction of a single wheelset with the rail in a quasi-static approach. In the second, the full dynamics of a railway wagon on a track layout are evaluated using the multibody dynamics simulation programs SIMPACK^® and VAMPIRE^®. The proposal for a quasi-static model is to reduce the time and computational effort to perform a pummeling analysis and quickly evaluate thousands of cases of wheel-rail contact. Track parameters and vehicle loads of a heavy haul railway are considered for the simulations. The results showed that the quasi-static model has a good correlation with the dynamic models on tangent track sections. For the curved sections, differences were observed in the distribution of pressures due to the absence of creep forces in the quasi-static model. The comparison between the models also showed slightly different results due to the different calculation of contact in each approach. The quasi-static approach reduced the time consuming by at least 73.4% over the multibody approach. Notwithstanding, the proposed model shows to be promising in replacing complete dynamic analysis for time-consuming tasks such as pummeling.</p>","PeriodicalId":49792,"journal":{"name":"Multibody System Dynamics","volume":"12 1","pages":""},"PeriodicalIF":3.4,"publicationDate":"2024-04-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140586988","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Forward dynamics simulation of a simplified neuromuscular-skeletal-exoskeletal model based on the CMA-ES optimization algorithm: framework and case studies","authors":"Wei Jin, Jiaqi Liu, Qiwei Zhang, Xiaoxu Zhang, Qining Wang, Jian Xu, Hongbin Fang","doi":"10.1007/s11044-024-09982-4","DOIUrl":"https://doi.org/10.1007/s11044-024-09982-4","url":null,"abstract":"<p>The modeling and simulation of coupled neuromusculoskeletal-exoskeletal systems play a crucial role in human biomechanical analysis, as well as in the design and control of exoskeletons. This study incorporates the integration of exoskeleton models into a reflex-based gait model, emphasizing human-exoskeleton interaction. Specifically, we introduce an optimization-based dynamic simulation framework that integrates a neuromusculoskeletal feedback loop, multibody dynamics, human-exoskeleton interaction, and foot-ground contact. The framework advances in human-exoskeleton interaction and muscle reflex model refinement. Without relying on experimental measurements or empirical data, our framework employs a stepwise optimization process to determine muscle reflex parameters, taking into account multidimensional criteria. This allows the framework to generate a full range of kinematic and biomechanical signals, including muscle activations, muscle forces, joint torques, etc., which are typically challenging to measure experimentally. To evaluate the validity of the framework, we compare the simulated results with experimental data obtained from a healthy subject wearing an exoskeleton while walking at different speeds (0.9, 1.0, and 1.1 m/s) and terrains (flat and uphill). The results demonstrate that our framework can capture the qualitative differences in muscle activity associated with different functions, as well as the evolutionary patterns of muscle activity and kinematic signals with respect to varying walking conditions, with the Pearson correlation coefficient R &gt; 0.7. Simulations of the human walking with the exoskeleton in both passive mode and assisting mode at a peak torque of 20 N⋅m are further conducted to investigate the effect of exoskeleton assistance on human biomechanics. The simulation framework we propose has the potential to facilitate gait analysis and performance evaluation of coupled human-exoskeleton systems, as well as enable efficient and cost-effective testing of novel exoskeleton designs and control strategies.</p>","PeriodicalId":49792,"journal":{"name":"Multibody System Dynamics","volume":"40 1","pages":""},"PeriodicalIF":3.4,"publicationDate":"2024-04-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140587212","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Optimization of design parameters and improvement of human comfort conditions in an upper-limb exosuit for assistance","authors":"Yaodong Lu, Yannick Aoustin, Vigen Arakelian","doi":"10.1007/s11044-024-09977-1","DOIUrl":"https://doi.org/10.1007/s11044-024-09977-1","url":null,"abstract":"<p>Exoskeleton robots have a wide range of applications in industrial field as well as for patients with locomotor disability. Among them, the flexible exoskeleton, known as “exosuit”, has attracted great interest from researchers. They are usually made up of flexible components such as cables and pieces of fabric. Since there are no rigid frames and links in the exosuits, they are much lighter and have less misalignment problems than the rigid exoskeletons. However, excessive pressure exerted by cables on soft tissues and skeleton of the human will lead to discomfort or even injuries. In this paper, a cable transmission system is incorporated into the exosuit system for gravitational compensation. The human body is assumed to be upright in the cable-driving wearable robot modeling. Then, a multi-criteria optimization approach, based on swarm intelligence, has been developed and adopted for reducing the uncomfortable forces applied on the user. Furthermore, the energy consumption is also taken into account in the design phase. Numerical simulation results demonstrate that the proposed exosuit design results in a reduction of more than 50% and 34% in the forces exerted on human body with loads of 0.5 kg and 5 kg, respectively. The energy loss was also reduced by up to 63% and 21% in these two cases.</p>","PeriodicalId":49792,"journal":{"name":"Multibody System Dynamics","volume":"58 1","pages":""},"PeriodicalIF":3.4,"publicationDate":"2024-04-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140587011","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Friction modeling from a practical point of view","authors":"Matthias Schuderer, Georg Rill, Thomas Schaeffer, Carsten Schulz","doi":"10.1007/s11044-024-09978-0","DOIUrl":"https://doi.org/10.1007/s11044-024-09978-0","url":null,"abstract":"<p>Regularized static friction models have been used successfully for many years. However, they are unable to maintain static friction in detail. For this reason, dynamic friction models have been developed and published in the literature. However, commercial multibody simulation packages such as Adams, RecurDyn, and Simpack have developed their own specific stick-slip models instead of adopting one of the public domain approaches. This article introduces the fundamentals of these commercial models and their behavior from a practical point of view. The stick-slip models were applied to a simple test model and a more sophisticated model of a festoon cable system using their standard parameters.</p>","PeriodicalId":49792,"journal":{"name":"Multibody System Dynamics","volume":"289 1","pages":""},"PeriodicalIF":3.4,"publicationDate":"2024-04-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140587008","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"A new contact and road model for multi-body dynamic simulation of wheeled vehicles on soft-soil terrain","authors":"Evangelos Koutras, Felipe Moretti Leila, Adrijan Ribaric, Sotirios Natsiavas","doi":"10.1007/s11044-024-09980-6","DOIUrl":"https://doi.org/10.1007/s11044-024-09980-6","url":null,"abstract":"<p>In this paper, a new high-performance and memory-efficient contact and road model is developed. Specifically, the road is modeled as a rectangular structured grid of deformable springs in the vertical direction, thus enabling fast execution. The new road model stands out due to its ability to handle large road scenarios by allocating computer memory dynamically for each spring, resulting in efficient memory utilization. Furthermore, each spring represents a small road patch that entails various information, such as the soil elevation, the soil properties, and the soil compaction, allowing for complicated simulations incorporating spatially varying soil properties and phenomena related to the multi-pass effect. In addition, using the new contact model, complex terrain geometries are handled in a computationally efficient way by approximating locally the irregular road profile with a suitable equivalent plane. For this, two different strategies are proposed, namely the radial basis function (RBF) interpolation method and the 3D enveloping contact model. Finally, the proposed techniques are implemented in Altair MotionSolve, a comprehensive multi-body simulation software for complex mechanical systems. In particular, a single-wheel test bed is initially examined followed by a four-wheeled rover model and the next-generation NATO reference mobility model (NG-NRMM). In all cases, the proposed model is validated by using available experimental data. Lastly, a case involving both wheeled and tracked vehicles is also examined by using a shared road model.</p>","PeriodicalId":49792,"journal":{"name":"Multibody System Dynamics","volume":"596 1","pages":""},"PeriodicalIF":3.4,"publicationDate":"2024-04-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140586992","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Experimental validation for the combination of funnel control with a feedforward control strategy","authors":"Svenja Drücker, Lukas Lanza, Thomas Berger, Timo Reis, Robert Seifried","doi":"10.1007/s11044-024-09976-2","DOIUrl":"https://doi.org/10.1007/s11044-024-09976-2","url":null,"abstract":"<p>Current engineering design trends, such as lightweight machines and human–machine interaction, often lead to underactuated systems. Output trajectory tracking of such systems is a challenging control problem. Here, we use a two-design-degree of freedom control approach by combining funnel feedback control with feedforward control based on servo-constraints. We present experimental results to verify the approach and demonstrate that the addition of a feedforward controller mitigates drawbacks of the funnel controller. We also present new experimental results for the real-time implementation of a feedforward controller based on servo-constraints on a minimum phase system.</p>","PeriodicalId":49792,"journal":{"name":"Multibody System Dynamics","volume":"28 1","pages":""},"PeriodicalIF":3.4,"publicationDate":"2024-03-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140168187","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"An electric kickscooter multibody model: equations of motion and linear stability analysis","authors":"A. G. Agúndez, D. García-Vallejo, E. Freire","doi":"10.1007/s11044-024-09974-4","DOIUrl":"https://doi.org/10.1007/s11044-024-09974-4","url":null,"abstract":"<p>In this work, a detailed multibody model of an electric kickscooter is presented. The model includes toroidal wheels as well as rear and front suspensions. The equations of motion are derived and linearized along the steady forward motion of the vehicle. Using an efficient linearization approach, suitable for complex multibody systems with holonomic and nonholonomic constraints, allows for obtaining the reduced linearized equations of motion as a function of the geometric, dynamic, wheels’, and suspensions’ parameters. The proposed electric kickscooter multibody model is validated with the stability results of a previously presented electric kickscooter benchmark. Since the resulting eigenvalues are parameterized regarding the design parameters, a detailed linear stability analysis of the system is performed. In particular, the influence on the stability of the toroidal geometry of the wheels, the elliptic cross-section of the toroidal wheels, the rider model, the steering axis inclination angle, the inertia tensor of the front frame, and the rear and front suspensions is analyzed. The model presented, together with the linearized equations of motion obtained in this work, enables a systematic analysis of the stability of these vehicles, which helps design new electric kickscooters with improved vehicle safety conditions and oriented to a wider range of potential users.</p>","PeriodicalId":49792,"journal":{"name":"Multibody System Dynamics","volume":"96 1","pages":""},"PeriodicalIF":3.4,"publicationDate":"2024-03-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140150043","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Swift augmented human–robot dynamics modeling for rehabilitation planning analyses","authors":"Vahid Akbari, Omid Mahdizadeh, S. Ali A. Moosavian, Mahdi Nabipour","doi":"10.1007/s11044-024-09975-3","DOIUrl":"https://doi.org/10.1007/s11044-024-09975-3","url":null,"abstract":"<p>With the widespread implementation of robotics exoskeletons in rehabilitation, modeling and dynamics analysis of such highly nonlinear coupled systems has become significantly important. In this paper, a swift numerical human–robot dynamics modeling has been developed to achieve accurate and realistic interpretation. This takes into consideration the separation and impact between multiple bodies for rehabilitation planning. To this end, first, a novel parallel algorithm combined with sequential interaction conditions is proposed based on the numerical recursive Newton–Euler method. The approach begins by deriving separated numerical models for the complicated system: i.e. both the human and the robot. These models are then augmented, with a primary focus on reducing the error of the interaction conditions, including forces and positions. The accuracy of the proposed model, with a computational complexity of O(n), is assessed by comparing to a previously validated nonrecursive analytical model with a higher computational complexity of O(n^4). Additionally, the quality of the connection between the human and the robot is assessed to establish a suitable control objective and an effective interaction strategy for rehabilitation planning. The study employs a lower-limb walking assistive robot developed in the ARAS lab (RoboWalk) to validate the proposed method. The algorithm is empirically implemented on the RoboWalk test stand, ensuring the integrity of the proposed dynamics modeling. The human–robot interaction forces are estimated with an accuracy of 2 N, in the presence of friction and measurement noise. Finally, the effectiveness of the model-based controller is assessed by using the proposed method, providing valuable tools for the enhancement of overall performance of such a complex dynamics system.</p>","PeriodicalId":49792,"journal":{"name":"Multibody System Dynamics","volume":"23 1","pages":""},"PeriodicalIF":3.4,"publicationDate":"2024-03-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140156911","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}