2018 7th International Conference on Industrial Technology and Management (ICITM)最新文献_第2页

Make to Order (MTO) production system: Structure, processes and techniques 按订单生产系统:结构、流程和技术

2018 7th International Conference on Industrial Technology and Management (ICITM) Pub Date : 2018-03-07 DOI: 10.1109/ICITM.2018.8333928

Ali Fazeli Moslehabadi

引用次数: 0

Change made in shop floor management to transform a conventional production system into an "Industry 4.0": Case studies in SME automotive production manufacturing 将传统生产系统转变为“工业4.0”的车间管理变革:中小企业汽车生产制造案例研究

2018 7th International Conference on Industrial Technology and Management (ICITM) Pub Date : 2018-03-07 DOI: 10.1109/ICITM.2018.8333919

S. Moica, J. Ganzarain, D. Ibarra, P. Ferencz

{"title":"Change made in shop floor management to transform a conventional production system into an \"Industry 4.0\": Case studies in SME automotive production manufacturing","authors":"S. Moica, J. Ganzarain, D. Ibarra, P. Ferencz","doi":"10.1109/ICITM.2018.8333919","DOIUrl":"https://doi.org/10.1109/ICITM.2018.8333919","url":null,"abstract":"Industry 4.0 will be the most powerful driver of innovation over the next few decades, innovation being the move towards sustainable competitiveness and profitable growth [1]. The research underpins the earlier research in methodological terms and traces successful performance such as productivity and quality results of an SME (small and medium-sized enterprise) within the context of Industry 4.0. This new industrial paradigm is not just about technology, but it also involves changes in the technical and production development, so current ways of value creation are evolving and bringing extensive organizational consequences and opportunities. Our case study presents the systematic diversification process described in the Maturity Model to implement Industry 4.0 scenario [2] in an automotive production company, using the three elements: Envision, Enable and Enact. We choose to present this case study because many companies want to start the implementation of this new business model. However, there is a gap of information concerning the steps that a small and medium production unit needs to make in order to change the strategy of the company regarding the Industry 4.0. All the above affect directly the productivity results without negative effects on the quality results of the analysed company.","PeriodicalId":341512,"journal":{"name":"2018 7th International Conference on Industrial Technology and Management (ICITM)","volume":"140 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122604267","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 14

Humanlike robot and human staff in service: Age and gender differences in perceiving smiling behaviors 类人机器人和服务中的人类员工:感知微笑行为的年龄和性别差异

2018 7th International Conference on Industrial Technology and Management (ICITM) Pub Date : 2018-03-07 DOI: 10.1109/ICITM.2018.8333927

Yu Chung-En

{"title":"Humanlike robot and human staff in service: Age and gender differences in perceiving smiling behaviors","authors":"Yu Chung-En","doi":"10.1109/ICITM.2018.8333927","DOIUrl":"https://doi.org/10.1109/ICITM.2018.8333927","url":null,"abstract":"With the development of humanlike robots, more service providers are applying this technology and there is no exception in the tourism and hospitality industry. Yet, it is unclear how different gender and age groups perceive robots in the service encounter. The present study investigates customers' perceptions toward the smiling behaviors, especially with various degrees of head tilts, of humanlike robots and humans in a service setting by comparing the perceptions of males (n=92) and females (n=121) of varying generations. A total of 10 stimuli were used with head tilt at − 20°, −10°, 0°, 10°, and 20°, in which, head tilt is considered a unique trait in smiling behavior. Findings showed that male and female customers in differing age groups had different perceptions toward the overall service quality, specifically the reliability and assurance, and overall visiting intentions, given by either the robot or human staff. Besides, customers all perceived interpersonal warmth and their customer satisfaction similarly. Finally, the findings provide insights for robotic technology and are of credible relevance regarding to technological improvements. Moreover, it contributes considerably to the tourism and hospitality industries.","PeriodicalId":341512,"journal":{"name":"2018 7th International Conference on Industrial Technology and Management (ICITM)","volume":"84 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130335788","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 27

Reducing bag defects using six Sigma methodology: A case study in a cement industry 使用六西格玛方法减少袋子缺陷:水泥工业的案例研究

2018 7th International Conference on Industrial Technology and Management (ICITM) Pub Date : 2018-03-07 DOI: 10.1109/ICITM.2018.8333911

N. T. Putri, Bayu Hidayat, S. Yusof, D. Fatrias, A. S. Indrapriyatna

{"title":"Reducing bag defects using six Sigma methodology: A case study in a cement industry","authors":"N. T. Putri, Bayu Hidayat, S. Yusof, D. Fatrias, A. S. Indrapriyatna","doi":"10.1109/ICITM.2018.8333911","DOIUrl":"https://doi.org/10.1109/ICITM.2018.8333911","url":null,"abstract":"An increase in cement production capacity made by the management of XYZ Cement Company in recent years has affected the number of bags of cement produced by the bag factory of XYZ. The addition of a new production line is one of the efforts made by the factory pouch pockets to be able to meet increased demand. However, the increase in the quantity of production of cement bags has not been in lined with the improvement of its quality. A large number of non-conformance products are still produced and the production cannot achieve the minimum defective bags allowed by the company. It showed that the quality of processes and products is still relatively low. Therefore, it is necessary to formulate an improvement action and a better quality control for products and process. This study begins with a proper identification of the condition of the system and then continues with a performance measurement system focusing on Lean Six Sigma and process capability measurement. The next step is to identify the sources and root cause analysis of non-conformance products by using Fishbone Diagrams and Failure Mode and Effect Analysis (FMEA). Then it proceeds with the formulation of the proposed improvement of the system based on the results. The study concluded with an improvement control plan that can be done. This study found that the sigma level of cement bag production in four production lines is 4.7 DPMO values of 710 and the possibility of defects per unit of 11 possibilities.","PeriodicalId":341512,"journal":{"name":"2018 7th International Conference on Industrial Technology and Management (ICITM)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130321144","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 6

Application of fuzzy materials-handling inputs with the genetic algorithm for machine layout 遗传算法在模糊物料搬运输入中的应用

2018 7th International Conference on Industrial Technology and Management (ICITM) Pub Date : 2018-03-07 DOI: 10.1109/ICITM.2018.8333958

Chiranuwat Jadram, W. Boongsood

{"title":"Application of fuzzy materials-handling inputs with the genetic algorithm for machine layout","authors":"Chiranuwat Jadram, W. Boongsood","doi":"10.1109/ICITM.2018.8333958","DOIUrl":"https://doi.org/10.1109/ICITM.2018.8333958","url":null,"abstract":"Each manufacturing industry produces a variety of products. Each product is different in terms of materials, process and production flow. These factors affect the total material handling, but the real situation has vagueness or fuzziness in the manufacturing system, depending on the periods of time involved, products variety, and business growth. A proper machine layout reduces material handling cost. Therefore, machine layout planning involved with fuzzy method is be applied to maximum utilization of facilities available. This paper presents the application of fuzzy set theory with a genetic algorithm for the selection operator using tournament selection for solving machine layout problems in order to manage vague information. Parameters including material flow frequency and material flow volume between workstations were considered as fuzzy numbers. The results were compared with a case study in a manufacturing system. The total distances had been from 38.45 m. to 26.25 m. 31.73% distance had been shorten. Therefore, the proposed method was able to solve machine layout problems effectively. Thus, it can be an alternative method in manufacturing management.","PeriodicalId":341512,"journal":{"name":"2018 7th International Conference on Industrial Technology and Management (ICITM)","volume":"554 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116517886","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1

Research on the gearbox fault diagnosis based on SCS-BP neural network 基于SCS-BP神经网络的齿轮箱故障诊断研究

2018 7th International Conference on Industrial Technology and Management (ICITM) Pub Date : 2018-03-07 DOI: 10.1109/ICITM.2018.8333915

Yafang Feng, Yu Yang

引用次数: 2

A quality visualization model for the evaluation and control of quality in vehicle assembly 面向整车装配质量评价与控制的质量可视化模型

2018 7th International Conference on Industrial Technology and Management (ICITM) Pub Date : 2018-03-07 DOI: 10.1109/ICITM.2018.8333910

Marco Gewohn, J. Beyerer, T. Usländer, G. Sutschet

引用次数: 10

Online simulation for flexible robotic manufacturing 柔性机器人制造的在线仿真

2018 7th International Conference on Industrial Technology and Management (ICITM) Pub Date : 2018-03-07 DOI: 10.1109/ICITM.2018.8333925

Christina Petschnigg, Guido Breitenhuber, Benjamin Breiling, Bernhard Dieber, Mathias Brandstötter

引用次数: 2

Forecast of copper price series using vector support machines 用向量支持机预测铜价系列

2018 7th International Conference on Industrial Technology and Management (ICITM) Pub Date : 2018-03-07 DOI: 10.1109/ICITM.2018.8333979

R. Carrasco, Gabriel Astudillo, I. Soto, M. Chacón, D. Fuentealba

引用次数: 10

The integrated multi-quay Berth Allocation and Crane Assignment Problem: Formulation and case study 综合多码头泊位分配与起重机分配问题:公式与案例研究

2018 7th International Conference on Industrial Technology and Management (ICITM) Pub Date : 2018-03-07 DOI: 10.1109/ICITM.2018.8333938

Issam Krimi, R. Benmansour, Abdessamad Ait el cadi, D. Duvivier, Nizar Elhachemi, L. Deshayes, Amine Ait Ouarrasse

引用次数: 1