Xintong Yang, Bohan Liu, Jing Wang, Changjiang Wang
{"title":"Research on Forced Oscillation Source Location Method of New Power System Using Complete EEMD with Adaptive Noise","authors":"Xintong Yang, Bohan Liu, Jing Wang, Changjiang Wang","doi":"10.1109/IFEEA57288.2022.10037981","DOIUrl":"https://doi.org/10.1109/IFEEA57288.2022.10037981","url":null,"abstract":"With the introduction of the dual-carbon goal, a large number of new energy power generation connected to the grid, exacerbating the risk of power oscillation. Fast and accurate location of forced oscillation source is the key to suppress power system forced oscillation. In order to improve the accuracy and anti-noise ability of forced oscillation source location based on dissipation energy flow, this paper proposes a forced oscillation source location method based on complete ensemble empirical mode decomposition with adaptive noise(CEEMDAN). This method first conducts CEEMDAN on the measurement of the generator, decom-poses the measurement into the intrinsic mode function (IMF) components with different oscillation modes, and extracts the IMF components representing the forced oscillation mode from many IMFs according to the IMF energy weight. On this basis, the calculation method of dissipation energy flow based on CEEMDAN is given, and the accurate location of forced oscillation source is realized according to the calculated dissipation energy flow. Finally, the proposed method is applied to the simulation data of WECC-179 bus test system for analysis and verification, and the relevant results verify the accuracy and robustness of the proposed method.","PeriodicalId":304779,"journal":{"name":"2022 9th International Forum on Electrical Engineering and Automation (IFEEA)","volume":"37 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133250220","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Fast Low Power 4 Transistor 4 Memristor Sense Amplifier","authors":"Bolin Zhang, Lei Li, Nan Pan, Shuo Li, Sen Gao","doi":"10.1109/IFEEA57288.2022.10037925","DOIUrl":"https://doi.org/10.1109/IFEEA57288.2022.10037925","url":null,"abstract":"With the continuous improvement of performance such as speed, power consumption and area of microprocessors and System on Chip (SoC), transistor response speed and chip integration aggravate the fluctuation of transistor threshold voltage, which brings about the improvement of memory performance. Great challenge. Memristors improve the overall performance of integrated circuits due to the advantages of non-volatility, high speed and infinite endurance, and compatibility with CMOS integrated circuit technology. The delay time of the circuit is 20ps, the total circuit current is 124$mu$A, the circuit power consumption is 2.976 fJ, and the output state reaches full swing. In this paper, a 4T4M sense amplifier is designed to improve the function of the sense amplifier circuit.","PeriodicalId":304779,"journal":{"name":"2022 9th International Forum on Electrical Engineering and Automation (IFEEA)","volume":"69 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115002006","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Influence of parameters of bidirectional pulse power supply on copper plating on printed circuit board","authors":"Shoutao Wang, Wenguang Chen, Zhijian Liu, Caiyi Wei, Yuanyuan Peng","doi":"10.1109/IFEEA57288.2022.10038184","DOIUrl":"https://doi.org/10.1109/IFEEA57288.2022.10038184","url":null,"abstract":"Printed circuit boards are the most important basic electronic components in the electronics industry, and copper plating technology is widely used in the field of printed circuit board manufacturing. Pulse plating is more efficient and environmentally friendly than DC plating, and the plating layer of pulse plating is more uniform and detailed. The effect of bi-directional pulse power supply parameters on the copper plating effect of printed circuit board surface was investigated by using a self-developed bidirectional pulse power supply. The experimental results show that the frequency, forward and reverse pulse duty cycle and current density of the bidirectional pulse power supply have certain effects on the copper plating effect.","PeriodicalId":304779,"journal":{"name":"2022 9th International Forum on Electrical Engineering and Automation (IFEEA)","volume":"65 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115104280","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Ultrasonic Inspection And Defect Identification of Thin - Walled Stainless Steel Welded Pipe Weld","authors":"Menglong Liu","doi":"10.1109/IFEEA57288.2022.10037864","DOIUrl":"https://doi.org/10.1109/IFEEA57288.2022.10037864","url":null,"abstract":"Stainless steel welded pipe is easy to produce fatal defects such as porosity, edge bite, weld Angle and non-fusion in the production process. Qualitative identification of defects in the welding pipe production process and timely adjustment of equipment and welding process parameters can effectively reduce the occurrence of defects. This research USES the ultrasonic detection, defect of time domain signal by using wavelet packet decomposition, analysis of the differences of defect signal amplitude and use the defect echo energy judging defect type is qualitative, the experimental results show that the ultrasonic test, using the wavelet packet decomposition algorithm, can realize to the stainless steel welded pipe flaw detection and recognition.","PeriodicalId":304779,"journal":{"name":"2022 9th International Forum on Electrical Engineering and Automation (IFEEA)","volume":"7 2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123612134","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Chenhong Zheng, Mengzhe Liu, Cong Zeng, Fangshun Xiao, Y. Wang
{"title":"Construction of Diagnosis and Evaluation Model of “Total Factor” Resource Input","authors":"Chenhong Zheng, Mengzhe Liu, Cong Zeng, Fangshun Xiao, Y. Wang","doi":"10.1109/IFEEA57288.2022.10037965","DOIUrl":"https://doi.org/10.1109/IFEEA57288.2022.10037965","url":null,"abstract":"This research has built a “all factor” resource input diagnosis and evaluation model. The evaluation index of “all elements” is selected by calculating the grey correlation degree, and the index weight is calculated by using the improved analytic hierarchy process. The weight is multiplied by the indicator value, and then the average value is calculated. The diagnostic evaluation score of “all factor” resource input is obtained, and the “all factor” resource input value is obtained by comparing the division criteria. The results show that the model can comprehensively evaluate the operation of the company and has high application value.","PeriodicalId":304779,"journal":{"name":"2022 9th International Forum on Electrical Engineering and Automation (IFEEA)","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124460871","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Study on the Development and Evolution of Distribution Network Form Driven by Scenario Demand","authors":"Xubin Wang, Jialei Zhang, Guanglong Xie, Yuwei Xiong, Yucheng Ding","doi":"10.1109/IFEEA57288.2022.10038067","DOIUrl":"https://doi.org/10.1109/IFEEA57288.2022.10038067","url":null,"abstract":"Based on the background situation analysis, this thesis involves an in-depth study of scenario construction, form development, and evolutionary path. Through the analysis of the economic and social development situation, the boundary conditions of future distribution network development are grasped. Based on the current problems and future challenges, international experience is learned and future key development trends are proposed. A typical scenario is built and divided into three stages: short-term, middle-term, and long-term. The form development characteristics are described, the evolution factors are considered, and the evolution path is analyzed. The evolution path of typical scenarios is proposed.","PeriodicalId":304779,"journal":{"name":"2022 9th International Forum on Electrical Engineering and Automation (IFEEA)","volume":"3 2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126143436","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Recognition method of hydrophobicity grade of composite insulator based on RS-RepVGG-B0","authors":"Liye Song, Xuyang Liu","doi":"10.1109/IFEEA57288.2022.10037833","DOIUrl":"https://doi.org/10.1109/IFEEA57288.2022.10037833","url":null,"abstract":"Hydrophobicity class (HC) of composite insulator is the evaluation index of its pollution flashover resistance. In order to identify the hydrophobicity level of composite insulators accurately, a method based on RS-RepVGG is proposed in this paper. The algorithm is based on RepVGG-B0. Firstly, during training, a residual branch across the nonlinear layer is added to RepBlocks to solve the depth constraint problem of RepVGG model without affecting the calculation efficiency of the model. Secondly, the reserved and merged (RM) operations are used to remove the added residual connections equivalently and the re parameterization method is used to decouple the network branches with VGG reasoning structure. Finally, based on this model, spectral nonlocal block (SNL) is introduced to replace the se attention mechanism module at stage2 in the original network, so that the network can capture long-range correlation more flexibly and robustly. The test was carried out in the water spray image data set of composite insulator of Christos-Christodoulos A. Kokalis team. Compared with repvgg-b0, rs-repvgg-b0 increased the model volume by 12.6%, but the floating-point calculation ability of the model was improved by 7.7%, the average recognition accuracy was improved by 2.72%, reaching 97.86%, and the uncertainty of misjudged sample results was not more than ± 1 HC level, which was in line with IEC TS 62073 standard. The experimental results show that, compared with many other existing methods, the RS-RepVGG based composite insulator hydrophobicity grade recognition method proposed in this paper has the advantages of high recognition accuracy, small size and strong floating-point computing ability, and meets the requirements of composite insulator hydrophobicity grade determination.","PeriodicalId":304779,"journal":{"name":"2022 9th International Forum on Electrical Engineering and Automation (IFEEA)","volume":"83 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126163085","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Hongwei Wang, Wen Zhang, Sheng-lu Zhang, Fei Wei, Yajing Ji, Fengying Hu
{"title":"Research on the construction and application of LCC based auxiliary decision model in the early stage of project","authors":"Hongwei Wang, Wen Zhang, Sheng-lu Zhang, Fei Wei, Yajing Ji, Fengying Hu","doi":"10.1109/IFEEA57288.2022.10037940","DOIUrl":"https://doi.org/10.1109/IFEEA57288.2022.10037940","url":null,"abstract":"Based on the research results of life-cycle cost, the application scenarios in the early stage of the project are explored. In the past, equipment selection was carried out based on experience on the basis of the purchase cost and related technical parameters, without considering the cost during the later operation of equipment. This paper explores the application of life-cycle cost for equipment selection, so as to provide a scientific and effective quantitative analysis tool for equipment selection. In the past, the cost of financial evaluation projects of feasibility study used simple proportion estimation method. In this paper, we explore the application of life-cycle cost to calculate project cost, so as to improve the calculation accuracy of financial evaluation of feasibility study, promote the deep integration of finance, equipment and investment business decision-making, and improve investment efficiency and benefit.","PeriodicalId":304779,"journal":{"name":"2022 9th International Forum on Electrical Engineering and Automation (IFEEA)","volume":"61 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124706122","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Regional energy Internet simulation system based on active distribution network technology","authors":"Jing Wang, Jing Liu, Yue Guo, Guang-Lei Li, Tianyou Yin, Li Mou","doi":"10.1109/IFEEA57288.2022.10038140","DOIUrl":"https://doi.org/10.1109/IFEEA57288.2022.10038140","url":null,"abstract":"With profound changes in the construction of intelligent distribution network and energy Internet, State Grid and other electric power enterprise urgently need to build a high-level talent team. Aiming at larger professional field span and higher professional skill requirements of active distribution network, a simulation system based on active distribution network technology has been developed in response to the research and training needs in the field of regional energy Internet. The training system takes the active distribution network as the core, covering all elements of \"source, grid, load, and storageʺ, and has the characteristics of flexible grid structure and researching.","PeriodicalId":304779,"journal":{"name":"2022 9th International Forum on Electrical Engineering and Automation (IFEEA)","volume":"74 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124710981","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Improved Chimp optimization algorithm with multi-strategy integration","authors":"Ya-mei Li, Tian-Cheng Jin, Shang-Lin Liu, S. Liu","doi":"10.1109/IFEEA57288.2022.10038204","DOIUrl":"https://doi.org/10.1109/IFEEA57288.2022.10038204","url":null,"abstract":"Aiming at the shortcomings of Chimp optimization algorithm, such as easy to fall into local optimum, slow convergence speed and low convergence accuracy, an improved Chimp optimization algorithm based on multi-strategy fusion is proposed. Firstly, the population was initialized by nonlinear control parameter strategy, which enhance the quality of the initial individuals and the diversity of the population, and lay the foundation for the global optimization of the algorithm. Secondly, by improving position updating process of chimp, the leader position of the attacker chimpanzee is reflected and the global optimization ability of the algorithm is improved. Finally, The Cauchy-Gauss mutation strategy was used to improve the ability of maintaining population diversity, improve the convergence accuracy and speed of the algorithm. Eleven bench mark test functions with different characteristics are optimizated. The test results and Wilcoxon’s signed rank test results both show that the improved algorithm has better optimization accuracy, convergence performance and stability.","PeriodicalId":304779,"journal":{"name":"2022 9th International Forum on Electrical Engineering and Automation (IFEEA)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129447593","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}