Modelling and Simulation in Engineering最新文献

{"title":"Finite Element Modelling and Simulation of Tunnel Gates of Dam Structures in ABAQUS Using Reduced-Integrated 8-Node Hexahedral Solid-Shell Element","authors":"C. Balkaya","doi":"10.1155/2024/7142460","DOIUrl":"https://doi.org/10.1155/2024/7142460","url":null,"abstract":"Tunnel gates used for water regulation are very important and critical parts of dam safety. This is because they are exposed to the hydrostatic pressure of the total height of the water in the reservoir. In this case study, a nonlinear finite element modelling and simulation of the diversion tunnel gate of the Gokdere Bridge Dam in Adana, Turkey, are performed to investigate the performance and capacity of the structure before collapse. The maximum water level in the reservoir is 85 meters. A 3D finite element modelling of the gate structure was created, considering the details of the construction project. Both the concrete structure and the anchorages between the concrete of the first and second phases of the gate structure and the steel profiles in the gate supports are modelled to obtain composite behavior, bond stresses, and a more accurate load and stress distribution. For the nonlinear finite element modelling in ABAQUS, C3D8R reduced-integrated 8-node hexahedral solid elements with concrete damage and tension stiffening are used. For the simulation, linear and nonlinear capacity analyses of the gate structure are performed, and the stresses, strains, deformations, and crack propagation in concrete and steel are investigated. It is found that nonlinear analysis and finite element modelling of anchors for capacity and load transfer are important in the simulation of gate structures to prevent tunnel collapse. It is suggested that dam monitoring and control systems and the use of multiple gates are recommended when a problem occurs in the operation of a gate in the diversion tunnel gates of a dam structure.","PeriodicalId":45541,"journal":{"name":"Modelling and Simulation in Engineering","volume":null,"pages":null},"PeriodicalIF":3.2,"publicationDate":"2024-05-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141010608","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Modeling and Simulation of the Effect of Airbag Thickness on the Performance of Extended Handle Pneumatic Floor Jack","authors":"Abduljebar Mahmud Aliy, Ramesh Babu Nallamothu, Abdulbasit Nasir","doi":"10.1155/2024/6500007","DOIUrl":"https://doi.org/10.1155/2024/6500007","url":null,"abstract":"In the process of changing tires, drivers require a suitable lifting device, namely, a jack, that can be inserted into a designated slot strategically positioned beneath the vehicle. Similarly, in workshops and maintenance facilities, jacks are essential for part replacements and maintenance. This research focuses on the design and analysis of extended handle pneumatic floor jacks specifically tailored for light-duty vehicles. The aim is to enhance effectiveness by enabling the repair of multiple vehicles simultaneously using a single compressor. The study utilizes ANSYS 2022R1 to assess the structural weaknesses of pneumatic airbags, aiming to explore technological advancements and develop an optimal airbag design capable of lifting light vehicles. Natural rubber is utilized as the airbag material, with thicknesses of 2.5 mm, 2.75 mm, and 3 mm. The study investigates three different airbag behaviors: von Mises stress, strain, and deformation in two directions. A pressure of 8.2 MPa is applied, and a weight of 4000 kg is imposed. The results indicate that the 2.5 mm and 2.75 mm thicknesses are unable to sustain the load and pressure, with the weakest area identified between the natural rubber and the metal cast iron that contacts the car’s body. Overall, the research achieved its objectives, and the findings will be effectively applied to model the extended handle pneumatic floor jack, facilitating tire lifting for maintenance and tire changes.","PeriodicalId":45541,"journal":{"name":"Modelling and Simulation in Engineering","volume":null,"pages":null},"PeriodicalIF":3.2,"publicationDate":"2024-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140655299","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Assessment of Fractional and Integer Order Models of Induction Motor Using MATLAB/Simulink","authors":"Girma Kassa Alitasb","doi":"10.1155/2024/2739649","DOIUrl":"https://doi.org/10.1155/2024/2739649","url":null,"abstract":"The definition of derivatives and integrals of any real or complex order can be found in fractional calculus, which is an extension of ordinary calculus. Many real-world processes might be more accurately modeled by these fractional calculi. Flexibility and nonlocality are the two fundamental benefits of fractional derivatives. These derivatives, which are of fractional order, are more flexible than classical derivatives in how they might approach real data. Due to its applications in numerous domains, the fractional order model has grown in significance and popularity. The simulation results have been performed for three squirrel cage induction motors which have different parameter values. To perform fractional order calculus, the Fractional Order Modeling and Control (FOMCOM) toolbox has been added to MATLAB. To determine the value of the order of differentiation (α) that best represents the induction motor, speed and torque simulations for several orders of differentiation (α) were performed. According to the results of the speed and torque simulation, an integer order (α=1) model is the optimal representation of the induction motor. The main goal of this paper is to investigate which model, either integer or fractional order model, best represents an induction motor.","PeriodicalId":45541,"journal":{"name":"Modelling and Simulation in Engineering","volume":null,"pages":null},"PeriodicalIF":3.2,"publicationDate":"2024-04-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140712166","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"State of the Art of Modelling and Design Approaches for Ejectors in Proton Exchange Membrane Fuel Cell","authors":"C. Antetomaso","doi":"10.1155/2024/7931501","DOIUrl":"https://doi.org/10.1155/2024/7931501","url":null,"abstract":"Proton exchange membrane fuel cell (PEMFC) has a promising future in the power generation and transportation fields. Recirculation of unused anodic gases is fundamental to achieve a high-performance energy system, and this is usually attained employing ejectors or pumps. With respect to the latter, ejectors present no moving parts, thus resulting in both higher overall efficiency of the system and lower maintenance cost. Their main drawback is represented by the narrow optimal operative range: the entrainment ratio (ER) greatly depends on primary pressure, working pressure, and operative condition in general. In the last decade, numerous authors focused their efforts on fully comprehending and correctly simulating their working principles and analyzing how geometrical parameters influence ER and design different geometries to enlarge the operative range. The aim of this paper is to present in an ordered and clear manner the state of the art of ejector design, both from simulative (turbulence model, single or multiphase stream, etc.) and empirical (commonly used “rule of thumb”) points of view.","PeriodicalId":45541,"journal":{"name":"Modelling and Simulation in Engineering","volume":null,"pages":null},"PeriodicalIF":3.2,"publicationDate":"2024-04-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140736586","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Predictive Modeling of Environmental Impact on Drone Datalink Communication System","authors":"I. Bennageh, H. Mahmoudi, H. Hajjaji, I. Laabousse, A. Hamdouchi","doi":"10.1155/2024/6151183","DOIUrl":"https://doi.org/10.1155/2024/6151183","url":null,"abstract":"In this study, we introduce an innovative model for evaluating the impact of environmental factors on drone-to-ground control station datalink communications. Our approach integrates both deterministic and stochastic processes to account for small-scale and large-scale fading effects, encompassing propagation attenuation, the Rician fading model, and Gaussian noise to accurately reflect real-world conditions. The model is implemented on signals transmitted using spread spectrum modulation. Through a comparative analysis of the model’s predictions against actual signals received in three distinct environments, the model’s efficacy in diverse scenarios is affirmed. Error metrics obtained from Monte Carlo simulations are employed to validate the theoretical results against experimental data. The proposed approach is pivotal for predicting the transmission range and understanding the electromagnetic susceptibility of the datalink, offering a substantial contribution to the optimization of remote drone control.","PeriodicalId":45541,"journal":{"name":"Modelling and Simulation in Engineering","volume":null,"pages":null},"PeriodicalIF":3.2,"publicationDate":"2024-04-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140742307","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Investigation of the Efficiency of Roll Profiles and Technological Schemes of Deformation of Asymmetric Rolling in Relief Rolls of C11000 Copper Alloy by FEM Simulation","authors":"E. Panin, A. Esbolat, A. Arbuz, D. Kuis, A. Naizabekov, S. Lezhnev, Almas Yerzhanov, Ivan Krupenkin, A. Tolkushkin, A. Kawałek, Pavel Tsyba","doi":"10.1155/2024/2486940","DOIUrl":"https://doi.org/10.1155/2024/2486940","url":null,"abstract":"In this paper, finite element simulation of asymmetric rolling in relief rolls of C11000 copper alloy in order to analyze the effectiveness of possible roll profiles and technological schemes of deformation was performed. The scientific innovation of this work lies in determining the patterns of development of stress-strain state parameters for various configurations of rolls, as well as determining the effectiveness of metal processing using various technological schemes. It was found that the use of trapezoidal relief makes it possible to increase the level of metal processing by almost 5 times compared with the use of radial relief. Comparison of technological schemes of deformation showed that deformation with 180° workpiece turning between passes significantly reduces the influence of the asymmetry factor. Deformation without changing the workpiece position between the passes has the opposite effect, and such a scheme significantly increases the influence of the asymmetry factor. Deformation with a transverse workpiece shift for the relief period between passes has the effect of a “golden mean.” The conducted laboratory experiment for lead billet showed that the shape change of lead billet during computer simulation has a high level of convergence with real conditions. At each stage of deformation, the difference in the geometric parameters of the workpiece between the model and the experiment did not exceed 3-5%. When deforming a copper billet, the maximum difference level was 8%, which is the result of the low rigidity of the rolling cage with smooth rolls.","PeriodicalId":45541,"journal":{"name":"Modelling and Simulation in Engineering","volume":null,"pages":null},"PeriodicalIF":3.2,"publicationDate":"2024-04-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140752171","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"A Multiobjective Model for a Multilevel Blood Supply Chain to Improve the Attractiveness of Blood Centers during the COVID-19 Pandemic","authors":"Abolfazl Moghimi Esfandabadi, Davood Shishebori, M. Fakhrzad, H. K. Zare","doi":"10.1155/2024/6540456","DOIUrl":"https://doi.org/10.1155/2024/6540456","url":null,"abstract":"Failure to control crisis conditions leads to irreparable damage to many supply chains around the world, including blood supply chains (BSCs) as critical networks in the health system. Consequently, it significantly reduces the supply of blood and its products, as vital materials, and exerts detrimental effects on the activities of blood organizations and facilities as well as the health of individuals in society. In the present study, the proposed model seeks to simultaneously minimize the operating costs and the shortage of blood products with the aim of improving the attractiveness of blood centers during the COVID-19 pandemic. Accordingly, by optimizing the overall cost and the attractiveness of blood donation centers, an attractive efficient environment is provided. It can help to remove barriers to blood donation and improve blood health. To this end, the model takes certain strategies into account for the proper establishment of new local blood collection centers (BCCs) and mobile BCCs. It also arranges suitable transportation vehicles for the efficient transfer of blood products to the provincial centers of the candidate country and sets various incentive policies for blood donation. In order to minimize the costs of the entire supply chain network and maximize the attractiveness of the BCCs, a two-objective mathematical model is developed. It produces Pareto solutions using the ε-constraint method. Finally, the efficiency of the proposed approach and the sensitivity of the corresponding parameters are analyzed through a practical case study. The obtained results represent that a growth in the attractiveness of blood centers induces a raise in the number of donors, and, consequently, the amount of the donated blood grows. This depends on more investment at all levels of the supply chain, including collection, production, storage, and transportation. Moreover, the performance and attractiveness of a BSC can be enhanced significantly if the number of collection centers and the amount of blood sent from the receiving centers to the demand nodes are increased.","PeriodicalId":45541,"journal":{"name":"Modelling and Simulation in Engineering","volume":null,"pages":null},"PeriodicalIF":3.2,"publicationDate":"2024-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140219136","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Theoretical Hydrodynamic Modeling of the Fluidized Bed Photoreactor (FBP) Using Computational Fluid Dynamics (CFD): Fluidization Conditions for TiO2-CuO Immobilized on Beach Sand Granules","authors":"R. Solano, M. Mueses, Adriana Herrera","doi":"10.1155/2024/8637773","DOIUrl":"https://doi.org/10.1155/2024/8637773","url":null,"abstract":"The flow regime is essential in the photoreactor’s performance in pollutant degradation in the aqueous medium, especially in fluidized systems. Therefore, this study is focused on determining the fluidization conditions of a granular catalyst based on TiO2-CuO nanoparticles (1 wt.% CuO) immobilized on beach sand granules using an FBP photoreactor. COMSOL Multiphysics 6.0 was employed for inlet velocities between 0.1 m/s and 1.0 m/s, mainly from the Reynolds averaged Navier–Stokes (RANS) turbulence model and the Stokes drag law. The results indicated that the average velocities in the annular section are much higher (4.11ut and 5.42ut) than the required particle terminal velocity. Moreover, the pressure contour lines revealed that these flow velocities do not represent excessive pressures in the concentric cylinders, with maximum gauge pressures of 740.52 Pa and 1310 Pa for inlet velocities Uo=0.75 and 1.0 m/s, respectively. Finally, it was determined that the Reynolds number adjusted (Repf) values lower than or equal to 1.37×10−3 allow high fluidization after 2 seconds. This information makes it possible to adapt and assemble the FBP equipment for future photocatalytic evaluation.","PeriodicalId":45541,"journal":{"name":"Modelling and Simulation in Engineering","volume":null,"pages":null},"PeriodicalIF":3.2,"publicationDate":"2024-03-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140247209","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Parametric and Nonparametric Approaches of Reid Vapor Pressure Prediction for Gasoline Containing Oxygenates: A Comparative Analysis Using Partial Least Squares, Nonlinear, and LOWESS Regression Modelling Strategies with Physical Properties","authors":"H. Issa","doi":"10.1155/2024/8442457","DOIUrl":"https://doi.org/10.1155/2024/8442457","url":null,"abstract":"This study provides insights into the challenges involved in predicting the Reid vapor pressure (RVP) of gasoline-oxygenate blends (GOB), which is an important indicator of fuel quality and compliance with environmental and performance standards. Given the enormous variety of gasoline compositions and ratios available, there is a significant demand for a fast, straightforward, and cost-effective technique to predict RVP without relying on costly instruments or complicated spectral measurements that involve numerous input variables. A comparative performance analysis has been performed for different regression modelling strategies for predicting RVP in GOB, which is valuable for researchers and practitioners in the petroleum industry for saving time and money. Parametric and nonparametric approaches were compared using partial least squares regression (PLSR), nonlinear regression (NLR), and nonparametric regression (NPR) models. Locally weighted scatterplot smoothing (LOWESS) approach was applied to the NPR model. The gasoline’s physical characteristics (distillation curves and density) formed the basis for the analysis of these models’ performances. Acceptable error metrics have been reached for root mean square error of calibration and prediction (RMSEC and RMSEP) values, for the PLSR, NLR, and NPR models, which are 4.790, 6.235, 4.739, 6.149, 3.968, and 6.029, respectively, which are close for those reported in literature. The NPR model eliminates parametric constraints and allows for a different kind of data structure to emerge. The established models here demonstrate a sound ability to overcome barriers by omitting the use of inconvenient spectral measurements to save expense and simplify data calibration, making them a promising approach for RVP detection of GOB. This finding aids in the development of more accurate RVP prediction models and contributes to the optimization of fuel formulations.","PeriodicalId":45541,"journal":{"name":"Modelling and Simulation in Engineering","volume":null,"pages":null},"PeriodicalIF":3.2,"publicationDate":"2024-03-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140251383","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Maximizing Electric Power Recovery through Advanced Compensation with MPPT Algorithms","authors":"S. Touairi, M. Zekraoui, Mustapha Mabrouki","doi":"10.1155/2024/1769145","DOIUrl":"https://doi.org/10.1155/2024/1769145","url":null,"abstract":"The present investigation introduces an advanced methodology for maximum power point tracking (MPPT) applied to a piezo harvester scheme. A comprehensive rectifier circuit, equipped with an embedded MPPT component, is established to optimize energy production by monitoring a DC-DC inverter connected to the rectifier. Furthermore, the system’s sensitivity error has been finely tuned to dynamically adjust its impedance unit in real time, thereby optimizing load acquisition. This innovative approach seamlessly integrates the MPPT algorithm into the piezo harvester circuit. Moreover, the vehicle’s road handling is significantly augmented through the incorporation of a robust steering front and an active differential control system. Leveraging the MPPT module, the rectifier consistently achieves a power recovery efficiency exceeding 85%, independent of varying load conditions. Additionally, a DC-DC converter circuit has been seamlessly integrated to finely adjust the output voltage to meet specified levels. Numerical simulations demonstrate the effectiveness of the harvesting scheme, extracting a substantial output power of 90 W with an overall efficiency of 70%. The improved MPPT approach, employing angles of arrival (AoA) DV-Hop control strategies, minimizes the system’s power consumption based on the Global Positioning System (GPS). The utilization of Harris Hawks optimization (HHO) and the generation of quadrants in the four-quadrant operation mode of DC motors in the wireless sensor network (RCSFs) have been significantly enhanced in this study. Simulations reveal that, at a velocity of 50 km/h, shock absorbers utilizing the received signal strength indication (RSSI) can harvest between 60 and 90 W on a class C road, based on the time of arrival (TOA). Striking a balance in ride comfort using the time difference of arrival (TDOA) as a trade-off constitutes approximately 30% of the piezoelectric harvester (PEH) system’s power consumption when operating in active suspension mode, optimized by particle swarm optimization (PSO).","PeriodicalId":45541,"journal":{"name":"Modelling and Simulation in Engineering","volume":null,"pages":null},"PeriodicalIF":3.2,"publicationDate":"2024-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140260713","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}