Tissue engineering. Part C, Methods最新文献

{"title":"Characterization of Acellular Cartilage Matrix-Sodium Alginate Scaffolds in Various Proportions.","authors":"Wang Lu, Mengchu Yang, Yanan Zhang, Baoxi Meng, Fulian Ma, Wanjun Wang, Teng Guo","doi":"10.1089/ten.TEC.2023.0348","DOIUrl":"10.1089/ten.TEC.2023.0348","url":null,"abstract":"<p><p>The development of three-dimensional (3D) bioprinting technology has provided a new solution to address the shortage of donors, multiple surgeries, and aesthetic concerns in microtia reconstruction surgery. The production of bioinks is the most critical aspect of 3D bioprinting. Acellular cartilage matrix (ACM) and sodium alginate (SA) are commonly used 3D bioprinting materials, and there have been reports of their combined use. However, there is a lack of comprehensive evaluations on ACM-SA scaffolds with different proportions. In this study, bioinks were prepared by mixing different proportions of decellularized rabbit ear cartilage powder and SA and then printed using 3D bioprinting technology and crosslinked with calcium ions to fabricate scaffolds. The physical properties, biocompatibility, and toxicity of ACM-SA scaffolds with different proportions were compared. The adhesion and proliferation of rabbit adipose-derived stem cells on ACM-SA scaffolds of different proportions, as well as the secretion of Collagen Type II, were evaluated under an adipose-derived stem cell chondrogenic induction medium. The following conclusions were drawn: when the proportion of SA in the ACM-SA scaffolds was <30%, the printed structure failed to form. The ACM-SA scaffolds in proportions from 1:9 to 6:4 showed no significant cytotoxicity, among which the 5:5 proportion of ACM-SA scaffold was superior in terms of adhesiveness and promoting cell proliferation and differentiation. Although a higher proportion of SA can provide greater mechanical strength, it also significantly increases the swelling ratio and reduces cell proliferation capabilities. Overall, the 5:5 proportion of ACM-SA scaffold demonstrated a more desirable biological and physical performance.</p>","PeriodicalId":23154,"journal":{"name":"Tissue engineering. Part C, Methods","volume":" ","pages":"170-182"},"PeriodicalIF":3.0,"publicationDate":"2024-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC11001505/pdf/","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139991270","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Novel Sheep Model to Assess Critical-Sized Bone Regeneration with Periosteum for <i>In Vivo</i> Bioreactors.","authors":"Yohaann A Ghosh, Hai Xin, D S Abdullah Al Maruf, Kai Cheng, Innes Wise, Chris Burrows, Ruta Gupta, Veronica Ka-Yan Cheung, James Wykes, David Leinkram, Catriona Froggatt, Will Lewin, Hedi V Kruse, Eva Tomaskovic-Crook, David R McKenzie, Jeremy Crook, Jonathan R Clark","doi":"10.1089/ten.TEC.2023.0345","DOIUrl":"10.1089/ten.TEC.2023.0345","url":null,"abstract":"<p><p>Considerable research is being undertaken to develop novel biomaterials-based approaches for surgical reconstruction of bone defects. This extends to three-dimensional (3D) printed materials that provide stable, structural, and functional support <i>in vivo</i>. However, few preclinical models can simulate <i>in vivo</i> human biological conditions for clinically relevant testing. In this study we describe a novel ovine model that allows evaluation of <i>in vivo</i> osteogenesis via contact with bone and/or periosteum interfaced with printed polymer bioreactors loaded with biomaterial bone substitutes. The infraspinous scapular region of 14 Dorset cross sheep was exposed. Vascularized periosteum was elevated either attached to the infraspinatus muscle or separately. In both cases, the periosteum was supplied by the periosteal branch of the circumflex scapular vessels. In eight sheep, a 3D printed 4-chambered polyetheretherketone bioreactor was wrapped circumferentially in vascularized periosteum. In 6 sheep, 12 double-sided 3D printed 2-chambered polyetherketone bioreactors were secured to the underlying bone allowing direct contact with the bone on one side and periosteum on the other. Our model enabled simultaneous testing of up to 24 (12 double-sided) 10 × 10 × 5 mm bioreactors per scapula in the flat contact approach or a single 40 × 10 mm four-chambered bioreactor per scapula using the periosteal wrap. <i>De novo</i> bone growth was evaluated using histological and radiological analysis. Of importance, the experimental model was well tolerated by the animals and provides a versatile approach for comparing the osteogenic potential of cambium on the bone surface and elevated with periosteum. Furthermore, the periosteal flaps were sufficiently large for encasing bioreactors containing biomaterial bone substitutes for applications such as segmental mandibular reconstruction.</p>","PeriodicalId":23154,"journal":{"name":"Tissue engineering. Part C, Methods","volume":" ","pages":"159-169"},"PeriodicalIF":3.0,"publicationDate":"2024-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139898281","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Trends and Future Research in Skeletal Muscle Tissue Engineering in the Past Decade (2012-2022).","authors":"Yichun Dou, Ling Zhang, Jiaqi Wang, Yun Xue, You Zhou, Yajun Liu, Liqun Zhang, Rui Shi","doi":"10.1089/ten.TEC.2023.0216","DOIUrl":"10.1089/ten.TEC.2023.0216","url":null,"abstract":"<p><p>To learn about advances in skeletal muscle tissue engineering (SMTE) in recent years, we used VOSviewer and Citespace software to quantitatively analyze and visualize relevant literature in the Web of Science database during the period 2012-2022. By mapping high-frequency keyword relationship networks, keyword time zones, and journal article cocitations, we clarified the areas of great interest, evolutionary paths, and developmental trends in research on SMTE. We conducted an in-depth analysis of highly cited and representative articles at various stages to summarize the mainstream research areas of great interest in SMTE and discussed the future development and challenges in this field, intending to provide a reference for the clinical treatment of skeletal muscle injury repair. We found that a collaborative network of authors has formed in this field; the journals publishing SMTE articles belong to the fields of biomaterials and tissue engineering, and open-access journals have played a key role in the promotion of the development of SMTE; and in the past decade, there has been rapid progress in SMTE research in terms of both depth and breadth. Impact statement Compared with the literature review method, bibliometrics can provide a comprehensive knowledge of a knowledge area based on a huge amount of literature. In this article, based on the Web of Science database, CiteSpace, and Vosviewer visualization tools were used to measure and analyze the literature reports in the field of skeletal muscle tissue engineering (SMTE). The research hotspots and cutting-edge information on SMTE were mined in terms of the number of publications, the number of citations, the keywords, the authors, and the publishing institutions to understand the current status of the research on SMTE in the world, to provide a reference for related researchers, engineering research in the field of SMTE, to comprehensively understand the current status of global research in the field of SMTE, and to provide a reference for related researchers.</p>","PeriodicalId":23154,"journal":{"name":"Tissue engineering. Part C, Methods","volume":" ","pages":"130-141"},"PeriodicalIF":3.0,"publicationDate":"2024-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139540898","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Longitudinal Monitoring of Angiogenesis in a Murine Window Chamber Model <i>In Vivo</i>.","authors":"Zhanpeng Xu, Wei Zhang, Carole Quesada, Xueding Wang, Mario Fabiilli","doi":"10.1089/ten.TEC.2023.0289","DOIUrl":"10.1089/ten.TEC.2023.0289","url":null,"abstract":"<p><p>Angiogenesis induced by growth factor administration, which can augment the blood supply in regenerative applications, has drawn wide attention in medical research. Longitudinal monitoring of vascular structure and development <i>in vivo</i> is important for understanding and evaluating the dynamics of involved biological processes. In this work, a dual-modality imaging system consisting of photoacoustic microscopy (PAM) and optical coherence tomography (OCT) was applied for noninvasive <i>in vivo</i> imaging of angiogenesis in a murine model. Fibrin scaffolds, with and without basic fibroblast growth factor (bFGF), were implanted in a flexible imaging window and longitudinally observed over 9 days. Imaging was conducted at 3, 5, 7, and 9 days after implantation to monitor vascularization in and around the scaffold. Several morphometric parameters were derived from the PAM images, including vessel area density (VAD), total vessel length (TVL), and vessel mean diameter (VMD). On days 7 and 9, mice receiving bFGF-laden fibrin gels exhibited significantly larger VAD and TVL compared to mice with fibrin-only gels. In addition, VMD significantly decreased in +bFGF mice versus fibrin-only mice on days 7 and 9. Blood vessel density, evaluated using immunohistochemical staining of explanted gels and underlying tissue on day 9, corroborated the findings from the PAM images. Overall, the experimental results highlight the utility of a dual-modality imaging system in longitudinally monitoring of vasculature <i>in vivo</i> with high resolution and sensitivity, thereby providing an effective tool to study angiogenesis.</p>","PeriodicalId":23154,"journal":{"name":"Tissue engineering. Part C, Methods","volume":" ","pages":"93-101"},"PeriodicalIF":2.7,"publicationDate":"2024-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC10924188/pdf/","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"138805997","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Polydioxanone Enhances Bone Regeneration After Resection and Reconstruction of Rat Femur with rhBMP2.","authors":"Barbara Ribeiro Rios, Stéfany Barbosa, William Phillip Pereira da Silva, Mario Jefferson Quirino Louzada, Edilson Ervolino, Eduardo C Kalil, Jamil Awad Shibli, Leonardo P Faverani","doi":"10.1089/ten.tec.2023.0304","DOIUrl":"10.1089/ten.tec.2023.0304","url":null,"abstract":"<p><p>The aim of this study was to assess the bone regeneration potential of a polydioxanone (PDO) scaffold together with recombinant human bone morphogenetic protein-2 (rhBMP-2) for the reconstruction of large bone defect. In total, 24 male rats (6 months old) were subjected to bilateral femoral stabilization using titanium plates to create a 2 mm gap, and reconstruction using rhBMP-2 (Infuse^®; 3.25 μg). The bone defects were covered with PDO (PDO group), or with titanium mesh (Ti group). Animals were euthanized on days 14 and 60. Simultaneously, 16 rats received PDO and Ti in their dorsum for the purpose of biocompatibility analysis at 3, 5, 7, and 10 days postoperatively. X-ray densitometry showed a higher density in the PDO group on day 14. On day 60, coverage of the bone defect with PDO showed a larger quantity of newly formed bone than that found for the Ti group, a lower inflammatory infiltrate value, and a more significant number of blood vessels on day 14. By immunohistochemical assessment, runt-related transcription factor 2 (RUNX2) and osteocalcin (OCN) showed higher labeling on day 14 in the PDO group. On day 60, bone morphogenetic protein-2 (BMP-2) showed higher labeling in the PDO group, whereas Ti showed higher labeling for osteoprotegerin, nuclear factor kappa B ligand-activating receptor, RUNX2, and OCN. Furthermore, biocompatibility analysis showed a higher inflammatory response in the Ti group. The PDO scaffold enhanced bone regeneration when associated with rhBMP-2 in rat femur reconstruction. Impact statement Regeneration of segmental bone defects is a difficult task, and several techniques and materials have been used. Recent advances in the production of synthetic polymers, such as polydioxanone (PDO), produced by three-dimensional printing, have shown distinct characteristics that could improve tissue regeneration even in an important bone defect. The present preclinical study showed that PDO membranes used as scaffolds to carry recombinant human bone morphogenetic protein-2 (rhBMP-2) improved bone tissue regeneration by more than 8-fold when compared with titanium mesh, suggesting that PDO membranes could be a feasible and useful material for use in guided bone regeneration. (In English, viable is only used for living creatures capable of sustaining life.</p>","PeriodicalId":23154,"journal":{"name":"Tissue engineering. Part C, Methods","volume":" ","pages":"102-112"},"PeriodicalIF":3.0,"publicationDate":"2024-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139564829","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Construction of Integral Decellularized Cartilage Using a Novel Hydrostatic Pressure Bioreactor.","authors":"Xiaoxiao Li, Weikang Zhao, Dandan Zhou, Pei Li, Chen Zhao, Qiang Zhou, Yiyang Wang","doi":"10.1089/ten.TEC.2023.0265","DOIUrl":"10.1089/ten.TEC.2023.0265","url":null,"abstract":"<p><p>The decellularized extracellular matrix (ECM) of cartilage is a widely used natural bioscaffold for constructing tissue-engineered cartilage due to its good biocompatibility and regeneration properties. However, current decellularization methods for accessing decellularized cartilaginous tissues require multiple steps and a relatively long duration to produce decellularized cartilage. In addition, most decellularization strategies lead to damage of the microstructure and loss of functional components of the cartilaginous matrix. In this study, a novel decellularization strategy based on a hydrostatic pressure (HP) bioreactor was introduced, which aimed to improve the efficiency of producing integral decellularized cartilage pieces by combining physical and chemical decellularization methods in a perfusing manner. Two types of cartilaginous tissues, auricular cartilage (AC) and nucleus pulposus (NP) fibrocartilage, were selected for comparison of the effects of ordinary, positive, and negative HP-based decellularization according to the cell clearance ratio, microstructural changes, ECM components, and mechanical properties. The results indicated that applying positive HP improved the efficiency of producing decellularized AC, but no significant differences in decellularization efficiency were found between the ordinary and negative HP-treated groups. However, compared with the ordinary HP treatment, the application of the positive or negative HP did not affect the efficiency of decellularized NP productions. Moreover, neither positive nor negative HP influenced the preservation of the microstructure and components of the AC matrix. However, applying negative HP disarranged the fibril distribution of the NP matrix and reduced glycosaminoglycans and collagen type II contents, two essential ECM components. In addition, the positive HP was beneficial for maintaining the mechanical properties of decellularized cartilage. The recellularization experiments also verified the good biocompatibility of the decellularized cartilage produced by the present bioreactor-based decellularization method under positive HP. Overall, applying positive HP-based decellularization resulted in a superior effect on the production of close-to-natural scaffolds for cartilage tissue engineering. Impact statement In this study, we successfully constructed a novel hydrostatic pressure (HP) bioreactor and used this equipment to produce decellularized cartilage by combining physical and chemical decellularization methods in a perfusing manner. We found that positive HP-based decellularization could improve the production efficiency of integral decellularized cartilage pieces and promote the maintenance of matrix components and mechanical properties. This new decellularization strategy exhibited a superior effect in the production of close-to-natural scaffolds and positively impacts cartilage tissue engineering.</p>","PeriodicalId":23154,"journal":{"name":"Tissue engineering. Part C, Methods","volume":" ","pages":"113-129"},"PeriodicalIF":3.0,"publicationDate":"2024-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139111162","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Potential Use of Extracellular Vesicles in the Treatment of Intervertebral Disc Degeneration.","authors":"Qiu-Wei Li, Ruo-Cheng Guo, Zuo-Meng Wu, Cai-Liang Shen","doi":"10.1089/ten.TEC.2023.0254","DOIUrl":"10.1089/ten.TEC.2023.0254","url":null,"abstract":"<p><p>Intervertebral disc degeneration (IVDD) is a major cause of low back pain, and several studies have evaluated the efficacy of extracellular vesicles (EVs) in the treatment of IVDD. The databases PubMed, Embase, and Cochrane Library were systematically searched from inception to the end of 2022 to identify studies investigating the therapeutic potential of cell-derived EVs for IVDD treatment. The following outcome measures were utilized: magnetic resonance imaging (MRI) Pfirrmann grading system, disc height index (DHI), histological grading, and apoptosis rate. A comprehensive meta-analysis was conducted, including a total of 13 articles comprising 19 studies involving 218 experimental animals. Comparative analysis between normal cell-derived EVs and placebo revealed significant reductions in MRI grade, increased DHI values, decreased nucleus pulposus cell apoptosis rates, and improved tissue grades. These findings collectively demonstrate the effective inhibition of IVDD through the application of EVs derived from cells. In conclusion, this study provides an updated synthesis of evidence supporting the efficacy of EVs as a promising therapeutic approach for IVDD treatment.</p>","PeriodicalId":23154,"journal":{"name":"Tissue engineering. Part C, Methods","volume":" ","pages":"73-84"},"PeriodicalIF":2.7,"publicationDate":"2024-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"71486443","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"<i>In Vivo</i> Vascularization Chamber for the Implantation of Embryonic Kidneys.","authors":"Peter Viktor Hauser, Lifu Zhao, Hsiao-Min Chang, Norimoto Yanagawa, Morgan Hamon","doi":"10.1089/ten.TEC.2023.0225","DOIUrl":"10.1089/ten.TEC.2023.0225","url":null,"abstract":"<p><p>A major obstacle to the implantation of <i>ex vivo</i> engineered tissues is the incorporation of functional vascular supply to support the growth of new tissue and to minimize ischemic injury. Existing prevascularization systems, such as arteriovenous (AV) loop-based systems, require microsurgery, limiting their use to larger animals. We aimed to develop an implantable device that can be prevascularized to enable vascularization of tissues in small rodents, and test its application on the vascularization of embryonic kidneys. Implanting the chamber between the abdominal aorta and the inferior vena cava, we detected endothelial cells and vascular networks after 48 h of implantation. Loading the chamber with collagen I (C), Matrigel (M), or Matrigel + vascular endothelial growth factor) (MV) had a strong influence on vascularization speed: Chambers loaded with C took 7 days to vascularize, 4 days for chambers with M, and 2 days for chambers with MV. Implantation of E12.5 mouse embryonic kidneys into prevascularized chambers (C, MV) was followed with significant growth and ureteric branching over 22 days. In contrast, the growth of kidneys in non-prevascularized chambers was stunted. We concluded that our prevascularized chamber is a valuable tool for vascularizing implanted tissues and tissue-engineered constructs. Further optimization will be necessary to control the directional growth of vascular endothelial cells within the chamber and the vascularization grade. Impact Statement Vascularization of engineered tissue, or organoids, constructs is a major hurdle in tissue engineering. Failure of vascularization is associated with prolonged ischemia time and potential tissue damage due to hypoxic effects. The method presented, demonstrates the use of a novel chamber that allows rapid vascularization of native and engineered tissues. We hope that this technology helps to stimulate research in the field of tissue vascularization and enables researchers to generate larger engineered vascularized tissues.</p>","PeriodicalId":23154,"journal":{"name":"Tissue engineering. Part C, Methods","volume":" ","pages":"63-72"},"PeriodicalIF":3.0,"publicationDate":"2024-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"138805984","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Novel Chip for Applying Mechanical Forces on Human Skin Models Under Dynamic Culture Conditions.","authors":"Katharina Kaiser, Jens Ahm Sørensen, Jonathan R Brewer","doi":"10.1089/ten.TEC.2023.0195","DOIUrl":"10.1089/ten.TEC.2023.0195","url":null,"abstract":"<p><p>In recent years the need for <i>in vitro</i> skin models as a replacement for animal studies has resulted in significant progress in the development of skin-on-a-chip models. These devices allow the fine control of the microenvironment of the model and the incorporation of chemical and physical stimuli. In this study, we describe the development of an easy and low-budget open-top dynamic microfluidic device for skin-on-a-chip experiments using polydimethylsiloxane and a porous polyethylene terephthalate membrane. The chip allows the incorporation of compressive stimuli during the cultivation period by the use of syringe pumps. Proof-of-concept results show the successful differentiation of the cells and establishment of the skin structure in the chip. The microfluidic skin-on-a-chip models presented in this study can serve as a platform for future drug and feasibility studies.</p>","PeriodicalId":23154,"journal":{"name":"Tissue engineering. Part C, Methods","volume":" ","pages":"85-91"},"PeriodicalIF":3.0,"publicationDate":"2024-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"89719611","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Study on the Effect of Type III Recombinant Humanized Collagen on Human Vascular Endothelial Cells.","authors":"Han Wang, Yonghao Xiao, Yuanguo Zhang, Zhu Meng, Chenyu Zhao, Fanshan Qiu, Chongchong Li, Zengguo Feng","doi":"10.1089/ten.TEC.2023.0211","DOIUrl":"10.1089/ten.TEC.2023.0211","url":null,"abstract":"<p><p>The effect and mechanism of type III recombinant humanized collagen (hCOLIII) on human vascular endothelial EA.hy926 cells at the cellular and molecular levels were investigated. The impact of hCOLIII on the proliferation of EA.hy926 cells was detected by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazoliumbromid assay, the effect of hCOLIII on cell migration was investigated by scratch assay, the impact of hCOLIII on cell cycle and apoptosis was detected by flow cytometry, the ability of hCOLIII to induce angiogenesis of EA.hy926 cells was evaluated by angiogenesis assay, and the effect of hCOLIII on vascular endothelial growth factor (VEGF) expression was detected by real-time reverse transcription-polymerase chain reaction analysis. The hCOLIII at concentrations of 0.5, 0.25, and 0.125 mg/mL all showed specific effects on the proliferation and migration of human vascular endothelial cells. It could also affect the cell cycle, increase the proliferation index, and increase the expression level of VEGF in human vascular endothelial cells. In the meantime, hCOLIII at the concentration of 0.5 mg/mL also showed a promoting effect on vessel formation. hCOLIII can potentially promote the endothelization process of blood vessels, mainly by affecting the proliferation, migration, and vascular-like structure of human endothelial cells. At the same time, hCOLIII can promote the expression of VEGF. This collagen demonstrated its potential as a raw material for cardiovascular implants.</p>","PeriodicalId":23154,"journal":{"name":"Tissue engineering. Part C, Methods","volume":" ","pages":"53-62"},"PeriodicalIF":3.0,"publicationDate":"2024-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"138452655","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}