Acta Biomaterialia Odontologica Scandinavica最新文献_第5页

Flexural strengths of reinforced denture base resins subjected to long-term water immersion. 长期浸水增强义齿基托树脂的抗弯强度。

Acta Biomaterialia Odontologica Scandinavica Pub Date : 2016-01-26 eCollection Date: 2016-12-01 DOI: 10.3109/23337931.2015.1135745

Kaneyoshi Yoshida, Yutaka Takahashi, Hirono Sasaki, Ippei Hamanaka, Tomohiro Kawaguchi

{"title":"Flexural strengths of reinforced denture base resins subjected to long-term water immersion.","authors":"Kaneyoshi Yoshida, Yutaka Takahashi, Hirono Sasaki, Ippei Hamanaka, Tomohiro Kawaguchi","doi":"10.3109/23337931.2015.1135745","DOIUrl":"https://doi.org/10.3109/23337931.2015.1135745","url":null,"abstract":"Objective This study evaluated the flexural strengths of reinforced denture base resins subjected to long-term water immersion. Materials and methods Acrylic denture base resin reinforced with metal wire or glass fiber-reinforced composite (FRC), and without reinforcement were tested. Bar-shaped specimens were fabricated. Half of the specimens were stored in 37 °C distilled water for 50 hours (h), the other half were stored in 37 °C distilled water for 180 days (d) before testing. Ten specimens were fabricated per group for each reinforcement/water immersion period combination. The ultimate flexural strength and flexural strength at the proportional limit of reinforced denture base resin were tested. Results The 180 d bulk specimen possessed significantly lower ultimate flexural strength compared with the 50 h bulk specimen (p < 0.05). The ultimate flexural strength of the 50 h metal, 50 h FRC, 180 d metal and the 180 d FRC reinforcement specimens were not significantly different from each other (p > 0.05). The 180 d bulk specimen had a significantly lower flexural strength at the proportional limit compared to the 50 h bulk specimen. The 180 d reinforced specimens of metal and FRC were not significantly different from each of the 50 h specimens. Conclusion The flexural strengths of a reinforced denture base resin did not change after long-term water immersion.","PeriodicalId":6997,"journal":{"name":"Acta Biomaterialia Odontologica Scandinavica","volume":"2 1","pages":"20-24"},"PeriodicalIF":0.0,"publicationDate":"2016-01-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.3109/23337931.2015.1135745","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"35112475","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 9

Influence of abutment design on retention of metal copings cemented to implants. 基台设计对种植体粘接金属冠固位的影响。

Acta Biomaterialia Odontologica Scandinavica Pub Date : 2016-01-26 eCollection Date: 2016-12-01 DOI: 10.3109/23337931.2015.1135748

Albano Porto da Cunha, Glauco Pereira Moysés, Ana Christina Claro Neves, Rafael Pino Vitti, Flávia Cardoso da Rosa Goulart, Laís Regiane da Siva-Concílio

{"title":"Influence of abutment design on retention of metal copings cemented to implants.","authors":"Albano Porto da Cunha, Glauco Pereira Moysés, Ana Christina Claro Neves, Rafael Pino Vitti, Flávia Cardoso da Rosa Goulart, Laís Regiane da Siva-Concílio","doi":"10.3109/23337931.2015.1135748","DOIUrl":"https://doi.org/10.3109/23337931.2015.1135748","url":null,"abstract":"Objective The study evaluated the influence of abutment design on the retention of implant-cemented metal copings. Material and methods Two abutments of the same system with the same indications, height and the total occlusal convergence, but of different designs were evaluated. Ten RN synOcta abutments (Straumann, Waltham, MA) and ten RN titanium solid abutments (Straumann, Waltham, MA) were tightened to 35 Ncm on 20 implant analogs previously placed in resin blocks. Twenty plastic burnout copings were waxed, included, cast and machined by a single operator. Coping was inspected for surface irregularities using a stereomicroscope at 10x magnification, and then, they were cemented (Temp Bond NE, Kerr, Romulus, MI) with 5 kg load for 10 min. The samples were stored for 24 h in room temperature and 100% humidity and then subjected to pull-out test at a crosshead speed of 0.5 mm/min. The load required to dislodge each coping was recorded (kgf) and and mean values for each group statistically calculated. Means and standard deviations of loads at failure were analyzed using Student's t-test. Results The mean load required to dislodge the copings showed by synOcta abutments (11.19 kgf) was statiscally higher than s solid abutments (10.18 kgf). Conclusions: It was concluded that the abutment design influenced significantly the retention of metal copings.","PeriodicalId":6997,"journal":{"name":"Acta Biomaterialia Odontologica Scandinavica","volume":"2 1","pages":"38-42"},"PeriodicalIF":0.0,"publicationDate":"2016-01-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.3109/23337931.2015.1135748","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"35112478","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Methodologies for measuring the setting times of mineral trioxide aggregate and Portland cement products used in dentistry. 测定牙科用矿物三氧化物骨料和硅酸盐水泥制品凝固时间的方法。

Acta Biomaterialia Odontologica Scandinavica Pub Date : 2016-01-26 eCollection Date: 2016-12-01 DOI: 10.3109/23337931.2015.1135746

William Nguyen Ha, Timothy Nicholson, Bill Kahler, Laurence James Walsh

{"title":"Methodologies for measuring the setting times of mineral trioxide aggregate and Portland cement products used in dentistry.","authors":"William Nguyen Ha, Timothy Nicholson, Bill Kahler, Laurence James Walsh","doi":"10.3109/23337931.2015.1135746","DOIUrl":"https://doi.org/10.3109/23337931.2015.1135746","url":null,"abstract":"Objective The current standard used to measure setting time for Mineral Trioxide Aggregate (MTA) involves indentation testing with arbitrary weights. This study compared indentation testing against rheological measurements and assessed the influences of particle size and the inclusion of bismuth oxide on the setting time of experimental MTA and Portland cement (PC). Material and methods Two PCs (P1 and P2) of different particle sizes were produced using the same clinker. From these two PCs, two experimental MTAs (M1 and M2) were created with the addition of bismuth oxide. Particle size distributions were assessed using laser diffraction analysis. Indentation setting time tests were performed in accordance to the Gillmore needle test. Elastic modulus was assessed using a strain-controlled rheometer at 1 rad s-1 and an applied strain of 0.01%. Results P1, P2, M1 and M2 cements had median particle sizes of 6.1, 12.5, 6.5 and 13.0 μm, respectively. Using indentation testing, final setting times were ranked P1 < M1 < P2 < M2. The ranking of the final setting time corresponded with the rheological assessment of time required to reach 95% of the elastic modulus plateau. Conclusions The time to reach 95% elastic modulus plateau of 9.3 min corresponds to a time close to the point where the material can be overlaid with another restorative material to give a final restoration. The 95% plateau value for elastic modulus may be a more useful parameter for determining how the setting reaction of PC and MTA cements progress over time.","PeriodicalId":6997,"journal":{"name":"Acta Biomaterialia Odontologica Scandinavica","volume":"2 1","pages":"25-30"},"PeriodicalIF":0.0,"publicationDate":"2016-01-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.3109/23337931.2015.1135746","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"35112476","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 18

Wear resistance of injection-molded thermoplastic denture base resins. 注射成型热塑性义齿基托树脂的耐磨性。

Acta Biomaterialia Odontologica Scandinavica Pub Date : 2016-01-26 eCollection Date: 2016-12-01 DOI: 10.3109/23337931.2015.1135747

Ippei Hamanaka, Misa Iwamoto, Lippo V J Lassila, Pekka K Vallittu, Yutaka Takahashi

{"title":"Wear resistance of injection-molded thermoplastic denture base resins.","authors":"Ippei Hamanaka, Misa Iwamoto, Lippo V J Lassila, Pekka K Vallittu, Yutaka Takahashi","doi":"10.3109/23337931.2015.1135747","DOIUrl":"https://doi.org/10.3109/23337931.2015.1135747","url":null,"abstract":"Objective This study investigated the wear resistance of injection-molded thermoplastic denture base resins using nanoindentation instrument. Materials and methods Six injection-molded thermoplastic denture base resins (two polyamides, two polyesters, one polycarbonate, one polymethylmethacrylate [PMMA]) and a PMMA conventional heat-polymerized denture-based polymer control were tested. Elastic modulus, hardness, wear depth, and roughness were calculated using a nanoindentation instrument. Results Elastic modulus and hardness of the injection-molded thermoplastic denture base resins were significantly lower than those of the PMMA conventional heat-polymerized denture-based polymer. Wear depth of polycarbonate and PMMA conventional heat-polymerized denture-based polymer were significantly higher than that of other injection-molded thermoplastic denture base resins. The roughness of injection-molded thermoplastic denture base resins was significantly more than that of PMMA conventional heat-polymerized denture-based polymer after testing. Conclusions Wear resistance of injection-molded thermoplastic denture base was low compared to PMMA conventional heat-polymerized denture-based polymers.","PeriodicalId":6997,"journal":{"name":"Acta Biomaterialia Odontologica Scandinavica","volume":"2 1","pages":"31-37"},"PeriodicalIF":0.0,"publicationDate":"2016-01-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.3109/23337931.2015.1135747","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"35112477","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 20

Deconvolution of the particle size distribution of ProRoot MTA and MTA Angelus. prooroot MTA和MTA Angelus粒度分布的反卷积。

Acta Biomaterialia Odontologica Scandinavica Pub Date : 2016-01-01 Epub Date: 2016-01-26 DOI: 10.3109/23337931.2015.1129611

William Nguyen Ha, Fardad Shakibaie, Bill Kahler, Laurence James Walsh

{"title":"Deconvolution of the particle size distribution of ProRoot MTA and MTA Angelus.","authors":"William Nguyen Ha, Fardad Shakibaie, Bill Kahler, Laurence James Walsh","doi":"10.3109/23337931.2015.1129611","DOIUrl":"https://doi.org/10.3109/23337931.2015.1129611","url":null,"abstract":"Objective Mineral trioxide aggregate (MTA) cements contain two types of particles, namely Portland cement (PC) (nominally 80% w/w) and bismuth oxide (BO) (20%). This study aims to determine the particle size distribution (PSD) of PC and BO found in MTA. Materials and methods The PSDs of ProRoot MTA (MTA-P) and MTA Angelus (MTA-A) powder were determined using laser diffraction, and compared to samples of PC (at three different particle sizes) and BO. The non-linear least squares method was used to deconvolute the PSDs into the constituents. MTA-P and MTA-A powders were also assessed with scanning electron microscopy. Results BO showed a near Gaussian distribution for particle size, with a mode distribution peak at 10.48 μm. PC samples milled to differing degrees of fineness had mode distribution peaks from 19.31 down to 4.88 μm. MTA-P had a complex PSD composed of both fine and large PC particles, with BO at an intermediate size, whereas MTA-A had only small BO particles and large PC particles. Conclusions The PSD of MTA cement products is bimodal or more complex, which has implications for understanding how particle size influences the overall properties of the material. Smaller particles may be reactive PC or unreactive radiopaque agent. Manufacturers should disclose particle size information for PC and radiopaque agents to prevent simplistic conclusions being drawn from statements of average particle size for MTA materials.","PeriodicalId":6997,"journal":{"name":"Acta Biomaterialia Odontologica Scandinavica","volume":"2 1","pages":"7-11"},"PeriodicalIF":0.0,"publicationDate":"2016-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.3109/23337931.2015.1129611","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"34604995","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 14

Release of cetyl pyridinium chloride from fatty acid chelate temporary dental cement. 脂肪酸螯合临时牙水泥中十六烷基吡啶氯的释放。

Acta Biomaterialia Odontologica Scandinavica Pub Date : 2016-01-01 Epub Date: 2015-12-18 DOI: 10.3109/23337931.2015.1125296

Andrew Hurt, Nichola J Coleman, Tamer Tüzüner, Bora Bagis, Fatih Mehmet Korkmaz, John W Nicholson

{"title":"Release of cetyl pyridinium chloride from fatty acid chelate temporary dental cement.","authors":"Andrew Hurt, Nichola J Coleman, Tamer Tüzüner, Bora Bagis, Fatih Mehmet Korkmaz, John W Nicholson","doi":"10.3109/23337931.2015.1125296","DOIUrl":"https://doi.org/10.3109/23337931.2015.1125296","url":null,"abstract":"Objective To determine whether the antimicrobial nature of a fatty acid chelate temporary dental cement can be enhanced by the addition of 5% cetyl pyridinium chloride (CPC). Materials and methods The temporary cement, Cavex Temporary was employed, and additions of CPC were made to either the base or the catalyst paste prior to mixing the cement. Release of CPC from set cement specimens was followed using reverse-phase HPLC for a period of up to 2 weeks following specimen preparation. Potential interactions between Cavex and CPC were examined by Fourier transform infrared spectroscopy (FTIR) and antimicrobial effects were determined using zone of inhibition measurements after 24 h with disc-shaped specimens in cultured Streptococcus mutans. Results FTIR showed no interaction between CPC and the components of the cement. CPC release was found to follow a diffusion mechanism for the first 6 h or so, and to equilibrate after approximately 2 weeks, with no significant differences between release profiles when the additive was incorporated into the base or the catalyst paste. Diffusion was rapid, and had a diffusion coefficient of approximately 1 × 10-9 m2 s-1 in both cases. Total release was in the range 10-12% of the CPC loading. Zones of inhibition around discs containing CPC were significantly larger than those around the control discs of CPC-free cement. Conclusions The antimicrobial character of this temporary cement can be enhanced by the addition of CPC. Such enhancement is of potential clinical value, though further in vivo work is needed to confirm this.","PeriodicalId":6997,"journal":{"name":"Acta Biomaterialia Odontologica Scandinavica","volume":"2 1","pages":"1-6"},"PeriodicalIF":0.0,"publicationDate":"2016-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.3109/23337931.2015.1125296","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"34603984","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 4

Effect of cements on fracture resistance of monolithic zirconia crowns. 胶结剂对整体氧化锆冠抗断裂性能的影响。

Acta Biomaterialia Odontologica Scandinavica Pub Date : 2016-01-01 Epub Date: 2016-01-26 DOI: 10.3109/23337931.2015.1129908

Keisuke Nakamura, Mathieu Mouhat, John Magnus Nergård, Solveig Jenssen Lægreid, Taro Kanno, Percy Milleding, Ulf Örtengren

{"title":"Effect of cements on fracture resistance of monolithic zirconia crowns.","authors":"Keisuke Nakamura, Mathieu Mouhat, John Magnus Nergård, Solveig Jenssen Lægreid, Taro Kanno, Percy Milleding, Ulf Örtengren","doi":"10.3109/23337931.2015.1129908","DOIUrl":"https://doi.org/10.3109/23337931.2015.1129908","url":null,"abstract":"Objectives The present study investigated the effect of cements on fracture resistance of monolithic zirconia crowns in relation to their compressive strength. Materials and methods Four different cements were tested: zinc phosphate cement (ZPC), glass-ionomer cement (GIC), self-adhesive resin-based cement (SRC) and resin-based cement (RC). RC was used in both dual cure mode (RC-D) and chemical cure mode (RC-C). First, the compressive strength of each cement was tested according to a standard (ISO 9917-1:2004). Second, load-to-failure test was performed to analyze the crown fracture resistance. CAD/CAM-produced monolithic zirconia crowns with a minimal thickness of 0.5 mm were prepared and cemented to dies with each cement. The crown-die samples were loaded until fracture. Results The compressive strength of SRC, RC-D and RC-C was significantly higher than those of ZPC and GIC (p < 0.05). However, there was no significant difference in the fracture load of the crown between the groups. Conclusion The values achieved in the load-to-failure test suggest that monolithic zirconia crowns with a minimal thickness of 0.5 mm may have good resistance against fracture regardless of types of cements.","PeriodicalId":6997,"journal":{"name":"Acta Biomaterialia Odontologica Scandinavica","volume":"2 1","pages":"12-19"},"PeriodicalIF":0.0,"publicationDate":"2016-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.3109/23337931.2015.1129908","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"34604996","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 48

Apatite precipitation on a novel fast-setting calcium silicate cement containing fluoride. 磷灰石在新型快凝含氟硅酸钙水泥上的沉淀。

Acta Biomaterialia Odontologica Scandinavica Pub Date : 2016-01-01 Epub Date: 2016-05-06 DOI: 10.1080/23337931.2016.1178583

Bahram Ranjkesh, Jacques Chevallier, Hamideh Salehi, Frédéric Cuisinier, Flemming Isidor, Henrik Løvschall

{"title":"Apatite precipitation on a novel fast-setting calcium silicate cement containing fluoride.","authors":"Bahram Ranjkesh, Jacques Chevallier, Hamideh Salehi, Frédéric Cuisinier, Flemming Isidor, Henrik Løvschall","doi":"10.1080/23337931.2016.1178583","DOIUrl":"https://doi.org/10.1080/23337931.2016.1178583","url":null,"abstract":"Aim: Calcium silicate cements are widely used in endodontics. Novel fast-setting calcium silicate cement with fluoride (Protooth) has been developed for potential applications in teeth crowns including cavity lining and cementation. Objective: To evaluate the surface apatite-forming ability of Protooth compositions as a function of fluoride content and immersion time in phosphate-buffered saline (PBS). Material and methods: Three cement compositions were tested: Protooth (3.5% fluoride and 10% radiocontrast), ultrafast Protooth (3.5% fluoride and 20% radiocontrast), and high fluoride Protooth (15% fluoride and 25% radiocontrast). Powders were cap-mixed with liquid, filled to the molds and immersed in PBS. Scanning electron microscopy, energy dispersive X-ray analysis, and Raman spectroscopy were used to characterize the precipitations morphology and composition after 1, 7, 28, and 56 days. Apatite/belite Raman peak height indicated the apatite thickness. Results: Spherical calcium phosphate precipitations with acicular crystallites were formed after 1-day immersion in PBS and Raman spectra disclosed the phosphate band at 965 cm-1, supporting the apatite formation over Protooth compositions. The apatite deposition continued and more voluminous precipitations were observed after 56 days over the surface of all cements. Raman bands suggested the formation of β-type carbonated apatite over Protooth compositions. High fluoride Protooth showed the most compact deposition with significantly higher apatite/belite ratio compared to Protooth and ultrafast Protooth after 28 and 56 days. Conclusions: Calcium phosphate precipitations (apatite) were formed over Protooth compositions after immersion in PBS with increasing apatite formation as a function of time. High fluoride Protooth exhibited thicker apatite deposition.","PeriodicalId":6997,"journal":{"name":"Acta Biomaterialia Odontologica Scandinavica","volume":"2 1","pages":"68-78"},"PeriodicalIF":0.0,"publicationDate":"2016-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1080/23337931.2016.1178583","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"34604997","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 23

Translucency of monolithic and core zirconia after hydrothermal aging. 热液老化后整体氧化锆和堆芯氧化锆的半透明性。

Acta Biomaterialia Odontologica Scandinavica Pub Date : 2015-12-23 Epub Date: 2015-11-09 DOI: 10.3109/23337931.2015.1102639

Salma M Fathy, Abeer A El-Fallal, Salwa A El-Negoly, Abu Baker El Bedawy

{"title":"Translucency of monolithic and core zirconia after hydrothermal aging.","authors":"Salma M Fathy, Abeer A El-Fallal, Salwa A El-Negoly, Abu Baker El Bedawy","doi":"10.3109/23337931.2015.1102639","DOIUrl":"https://doi.org/10.3109/23337931.2015.1102639","url":null,"abstract":"Objective: To evaluate the hydrothermal aging effect on the translucency of partially stabilized tetragonal zirconia with yttria (Y-TZP) used as monolithic or fully milled zirconia and of core type. Methods: Twenty disc-shaped specimens (1 and 10 mm) for each type of monolithic and core Y-TZP materials were milled and sintered according to the manufacturer's instruction. The final specimens were divided into two groups according to the type of Y-TZP used. Translucency parameter (TP) was measured over white and black backgrounds with the diffuse reflectance method; X-ray diffraction (XRD) and scanning electron microscope (SEM) were used to analyze the microstructure of both Y-TZP types before and after aging. Data for TP values was statistically analyzed using Student's t-test. Results: Monolithic Y-TZP showed the highest TP mean value (16.4 ± 0.316) before aging while core Y-TZP showed the lowest TP mean value (7.05 ± 0.261) after aging. There was a significant difference between the two Y-TZP types before and after hydrothermal aging. XRD analysis showed increases in monoclinic content in both Y-TZP surfaces after aging. Conclusion: Monolithic Y-TZP has a higher chance to low-temperature degradation than core type, which may significantly affect the esthetic appearance and translucency hence durability of translucent Y-TZP.","PeriodicalId":6997,"journal":{"name":"Acta Biomaterialia Odontologica Scandinavica","volume":"1 2-4","pages":"86-92"},"PeriodicalIF":0.0,"publicationDate":"2015-12-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.3109/23337931.2015.1102639","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"34603983","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 45

Reinforcing effect of glass fiber-reinforced composite reinforcement on flexural strength at proportional limit of a repaired denture base resin. 玻璃纤维增强复合材料对修复义齿基托树脂比例极限抗弯强度的增强作用。

Acta Biomaterialia Odontologica Scandinavica Pub Date : 2015-10-12 eCollection Date: 2015-12-01 DOI: 10.3109/23337931.2015.1099441

Kaneyoshi Yoshida, Yutaka Takahashi, Ippei Hamanaka, Tomohiro Kawaguchi, Hirono Sasaki, Hiroshi Shimizu

{"title":"Reinforcing effect of glass fiber-reinforced composite reinforcement on flexural strength at proportional limit of a repaired denture base resin.","authors":"Kaneyoshi Yoshida, Yutaka Takahashi, Ippei Hamanaka, Tomohiro Kawaguchi, Hirono Sasaki, Hiroshi Shimizu","doi":"10.3109/23337931.2015.1099441","DOIUrl":"https://doi.org/10.3109/23337931.2015.1099441","url":null,"abstract":"Objective: This study evaluated the reinforcing effect of glass fiber-reinforced composite (FRC) reinforcement on flexural strength at the proportional limit (FS-PL) of a repaired denture base resin. Materials and methods: Repaired denture base resins reinforced with metal and with FRC reinforcement, and that without reinforcement were tested. The ultimate flexural strength, the FS-PL and the elastic modulus of repaired denture base resins were tested. The joint efficiency (times) of the repaired denture base resins on the intact denture base resin was evaluated. Results: The repaired denture base resins reinforced with metal reinforcement and with FRC reinforcement had significantly higher ultimate flexural strength than the repaired denture base resin without reinforcement (p < 0.05) and were not significantly different from each other (p > 0.05). The FS-PL of a repaired denture base resin reinforced with the FRC reinforcement was similar to that with the metal reinforcement (p > 0.05), and these were significantly higher than the FS-PL of a repaired denture base resin without reinforcement (p < 0.05). The elastic modulus of the repaired denture base resin reinforced with the FRC reinforcement was significantly lower than that with metal reinforcement (p < 0.05) and was significantly higher than that without reinforcement (p < 0.05). The joint efficiency of the FRC reinforced specimen was 0.98. Conclusion: The FRC reinforcement had a reinforcing effect on the FS-PL of a repaired denture base resin.","PeriodicalId":6997,"journal":{"name":"Acta Biomaterialia Odontologica Scandinavica","volume":"1 2-4","pages":"81-85"},"PeriodicalIF":0.0,"publicationDate":"2015-10-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.3109/23337931.2015.1099441","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"35112474","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 8