Functional Composite Materials最新文献

{"title":"Preparation, morphology and thermoelectric performance of PEDOT/CuI nanocomposites","authors":"Joherul Alam,&nbsp;Xiao Su,&nbsp;Hsu-Chiang Kuan,&nbsp;Shahraam Afshar Vahid,&nbsp;Kamil Zuber,&nbsp;Qingshi Meng,&nbsp;Fanzhe Meng,&nbsp;Dusan Losic,&nbsp;Jun Ma","doi":"10.1186/s42252-023-00047-x","DOIUrl":"10.1186/s42252-023-00047-x","url":null,"abstract":"<div><p>Incorporating inorganic nanomaterials into a polymer matrix is one of the most effective ways to create thermoelectric performance for applications where physical flexibility is essential. In this study, flexible thermoelectric nanocomposite films were synthesized by incorporating inorganic copper iodide (CuI) nanosheets as the filler into poly (3,4-ethylene dioxythiophene): poly (styrene sulfonate) (PEDOT: PSS). The process involved the preparation of bulk CuI from precursors and, subsequently, the nanosheet synthesis by dissolving the bulk CuI in dimethyl sulfoxide (DMSO). The morphology of the nanosheets and the nanocomposite films was thoroughly examined, and the film’s thermoelectric performance was evaluated using a standard thermoelectric measurement system, ZEM-3. The morphological observation revealed a triangular nanosheet geometry for CuI, with an average lateral dimension of ~33 nm. The PEDOT/CuI nanocomposite films were prepared by mixing CuI nanosheets with PEDOT: PSS through ultrasonication and filtration on a PVDF membrane. The film with 6.9 vol% of CuI nanosheets exhibited an electrical conductivity and Seebeck coefficient of 852.07 S·cm^-1 and 14.95 µV·K^-1, respectively. This resulted in an enhanced power factor of 19.04 µW·m^-1·K^-2, much higher than the individual composite components. It demonstrated a trend of increasing power factor with the nanosheets up to 6.9 vol% due to improved electrical conductivity. The increase in electrical conductivity can be attributed to the screening effect induced by DMSO, which leads to a conformational change in the PEDOT chains. Furthermore, an optimal fraction of CuI nanosheets also contributes to this conformational change, further enhancing the electrical conductivity.</p><h3>Graphical Abstract</h3>\u0000 <div><figure><div><div><picture><source><img></source></picture></div></div></figure></div>\u0000 </div>","PeriodicalId":576,"journal":{"name":"Functional Composite Materials","volume":"4 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://functionalcompositematerials.springeropen.com/counter/pdf/10.1186/s42252-023-00047-x","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134796582","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Study on mixing behaviour of aluminium-ceramic powder having high SiC volume fractions up to 50 vol.%","authors":"Marco Speth,&nbsp;Kim Rouven Riedmueller,&nbsp;Mathias Liewald","doi":"10.1186/s42252-023-00045-z","DOIUrl":"10.1186/s42252-023-00045-z","url":null,"abstract":"<div><p>Aluminium matrix composites (AMC) do combine a high lightweight potential with a wide range of specific mechanical or thermal properties, depending on their material composition or the content of reinforcement particles, respectively. Currently, the three main production technologies for manufacturing such AMC are powder metallurgy, semi-solid processes and casting. Here, the AMC´s reinforcement proportion that can be processed depends on the chosen manufacturing strategy and is therefore often limited to a maximum value of 30 vol. %, due to agglomeration and porosity problems. In this context, the main objective is to understand the fundamental mixing behaviour of powder mixtures for AMC green body production having reinforcement contents of up to 50 vol.% SiC_p. For this purpose, powder mixtures of monomodal AlSi7Mg0.6 and different SiC_p fractions were prepared with different mixing times and speeds to investigate the influence of these mixing parameters on the homogeneity of the particle distribution. Afterwards, the influence of powder size on the mixing process was investigated. The results showed that a slower mixing speed resulted in faster homogenisation as well as a larger particle size can be faster mixed. Furthermore, a regression model was developed using mixing time, speed and particle loading, to determine sufficient mixing parameters.\u0000</p></div>","PeriodicalId":576,"journal":{"name":"Functional Composite Materials","volume":"4 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-06-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://functionalcompositematerials.springeropen.com/counter/pdf/10.1186/s42252-023-00045-z","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"4661183","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Heat treated graphene thin films for reduced void content of interlaminar enhanced CF/PEEK composites","authors":"Christopher Leow,&nbsp;Peter B. Kreider,&nbsp;Silvano Sommacal,&nbsp;Christian Notthoff,&nbsp;Patrick Kluth,&nbsp;Paul Compston","doi":"10.1186/s42252-023-00044-0","DOIUrl":"10.1186/s42252-023-00044-0","url":null,"abstract":"<div><p>Graphene enhanced thermoplastic composites offer the possibility of conductive aerospace structures suitable for applications from electrostatic dissipation, to lightning strike protection and heat dissipation. Spray deposition of liquid phase exfoliated (LPE) aqueous graphene suspensions are highly scalable rapid manufacturing methods suitable to automated manufacturing processes. The effects of residual surfactant and water from LPE on thin films for interlaminar prepreg composite enhancement remain unknown. This work investigates the effect of heat treatment on graphene thin films spray deposited onto carbon fibre/polyether ether ketone (CF/PEEK) composites for reduced void content. Graphene thin films deposited onto CF/PEEK prepreg tapes had an RMS roughness of 1.99 μm and an average contact angle of 11°. After heat treatment the roughness increased to 2.52 μm with an average contact angle of 82°. The SEM images, contact angle, and surface roughness measurements correlated suggesting successful removal of excess surfactant and moisture with heat treatment. Raman spectroscopy was used to characterise the chemical quality of the consolidated graphene interlayer. Spectral data concluded the graphene was 3–4 layered with predominantly edge defects suggesting high quality graphene suitable for electrical enhancement. Conductive-AFM measurements observed an increase in conductive network density in the interlaminar region after the removal of surfactant from the thin film. Heat treatment of the Control sample successfully reduced void content from 4.2 vol% to 0.4 vol%, resulting in a 149% increase in compressive shear strength. Comparatively, heat treatment of graphene enhanced samples (~ 1 wt%) reduced void content from 5.1 vol% to 2.8 vol%. Although a 25% reduction in shear strength was measured, the improved electrical conductivity of the interlaminar region extends the potential applications of fibre reinforced thermoplastic composites. The heat treatment process proves effective in reducing surfactant and thus void content while improving electrical conductivity of the interlayer in a scalable manner. Further investigations into graphene loading effects on conductive enhancement, and void formation is needed.</p></div>","PeriodicalId":576,"journal":{"name":"Functional Composite Materials","volume":"4 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-06-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://functionalcompositematerials.springeropen.com/counter/pdf/10.1186/s42252-023-00044-0","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"4586454","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Low electric field induction in BaTiO3-epoxy nanocomposites","authors":"Raghvendra Kumar Mishra,&nbsp;Danning Li,&nbsp;Iva Chianella,&nbsp;Saurav Goel,&nbsp;Saeid Lotfian,&nbsp;Hamed Yazdani Nezhad","doi":"10.1186/s42252-023-00043-1","DOIUrl":"10.1186/s42252-023-00043-1","url":null,"abstract":"<div><p>Epoxy is widely used material, but epoxy has limitations in terms of brittleness in failure, and thus researchers explore toughening and strengthening options such as adding a second phase or using electromagnetic fields to tailor toughness and strength, on demand and nearly instantaneously. Such approach falls into the category of active toughening but has not been extensively investigated. In this research, Si-BaTiO₃ nanoparticles were used to modify the electro-mechanical properties of a high-performance aerospace-grade epoxy so as to study its response to electric fields, specifically low field strengths. To promote uniform dispersion and distribution, the Si-BaTiO₃ nanoparticles were functionalised with silane coupling agents and mixed in the epoxy Araldite LY1564 at different content loads (1, 5, 10 wt%), which was then associated with its curing agent Aradur 3487. Real-time measurements were conducted using Raman spectroscopy while applying electric fields to the nanocomposite specimens. The Raman data showed a consistent trend of increasing intensity and peak broadening under the increasing electric field strength and Si-BaTiO₃ contents. This was attributed to the BaTiO₃ particles’ dipolar displacement in the high-content nanocomposites (i.e., 5 wt% and 10 wt%). The study offers valuable insights on how electric field stimulation can actively enhance the mechanical properties in epoxy composites, specifically in relatively low fields and thin, high-aspect-ratio composite layers which would require in-situ mechanical testing equipped with electric field application, an ongoing investigation of the current research.</p></div>","PeriodicalId":576,"journal":{"name":"Functional Composite Materials","volume":"4 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-05-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://functionalcompositematerials.springeropen.com/counter/pdf/10.1186/s42252-023-00043-1","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"5126728","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"2D nanochannels and huge specific surface area offer unique ways for water remediation and adsorption: assessing the strengths of hexagonal boron nitride in separation technology","authors":"Sankeerthana Avasarala,&nbsp;Suryasarathi Bose","doi":"10.1186/s42252-023-00042-2","DOIUrl":"10.1186/s42252-023-00042-2","url":null,"abstract":"<div><p>This review highlights the advantages of incorporating hexagonal Boron Nitride (BN) into the current membrane-based architectures for water remediation over other well-explored 2D nanomaterials such as graphene, graphene oxide, molybdenum sulphide, MXenes. BN has an interlayer spacing of 3.3A⁰ which is similar to that of graphene, but smaller than that of the other 2D nanomaterials. BN is bioinert, and stable under harsh chemical and thermal conditions. When combined with thin film composite and mixed matrix membrane architectures, BN can help achieve high permeance, dye rejection, and desalination. Laminar membranes assembled by BN nanosheets do not swell uncontrollably in aqueous environments unlike graphene oxide. BN nanomaterials have a large specific surface area which implies more adsorption sites, and are inherently hydrophobic in nature, which means the adsorbent in its powder form can be easily separated from contaminated water. BN adsorbents can be regenerated by treating with chemicals or heating to high temperatures to remove the adsorbate, without damaging the BN, due to its thermal and chemical inertness. BN nanomaterials have the potential to circumvent the current shortcomings of membranes and adsorbents, while greatly enhancing the performance of membranes and adsorbents for water remediation.</p><h3>Graphical Abstract</h3>\u0000 <figure><div><div><div><picture><source><img></source></picture></div></div></div></figure>\u0000 </div>","PeriodicalId":576,"journal":{"name":"Functional Composite Materials","volume":"4 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-04-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://functionalcompositematerials.springeropen.com/counter/pdf/10.1186/s42252-023-00042-2","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"4917470","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Evaluating the sustainability of lightweight drones for delivery: towards a suitable methodology for assessment","authors":"Sinéad Mitchell,&nbsp;Juliana Steinbach,&nbsp;Tomás Flanagan,&nbsp;Pouyan Ghabezi,&nbsp;Noel Harrison,&nbsp;Simon O’Reilly,&nbsp;Stephen Killian,&nbsp;William Finnegan","doi":"10.1186/s42252-023-00040-4","DOIUrl":"10.1186/s42252-023-00040-4","url":null,"abstract":"<div><p>Drone technology is widely available and is rapidly becoming a crucial instrument in the functions of businesses and government agencies worldwide. The demand for delivery services is accelerating particularly since the Covid-19 pandemic. Both companies and customers want these services to be efficient, timely, safe, and sustainable, but these are major challenges. Last-mile delivery by lightweight short-range drones has the potential to address these challenges. However, there is a lack of consistency and transparency in assessing and reporting the sustainability of last-mile delivery services and drones. This paper critically reviews published papers on Life Cycle Assessments of drones to date. The study reveals a lack of comprehensive studies, and a need to examine composite and battery manufacturing developments and provides key considerations for future study development.</p><h3>Graphical Abstract</h3>\u0000 <figure><div><div><div><picture><source><img></source></picture></div></div></div></figure>\u0000 </div>","PeriodicalId":576,"journal":{"name":"Functional Composite Materials","volume":"4 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-04-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://functionalcompositematerials.springeropen.com/counter/pdf/10.1186/s42252-023-00040-4","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"4783467","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Electrical conduction investigation of pre-stressed carbon/epoxy fabric laminates heated by ampere-level currents","authors":"Gang Zhou,&nbsp;Ewa Mikinka,&nbsp;Xujin Bao,&nbsp;Weiwei Sun","doi":"10.1186/s42252-023-00041-3","DOIUrl":"10.1186/s42252-023-00041-3","url":null,"abstract":"<div><p>A study on electrical conduction of carbon/epoxy laminates has so far been conducted in an ad hoc nature without a standardised method, involving many extrinsic factors. How these factors affect electrical conduction of carbon/epoxy laminates has not been well established. The objectives of this work are to ascertain the effects of electrical currents, temperatures, and clamping torques on the anisotropic electrical conduction of carbon/epoxy laminates. Two-probe method with solid electrodes was developed with machined carbon/epoxy laminate specimens of various dimensions. The contributions of elevated temperatures and clamping pressures to electrical conduction were investigated. Various contact conditions with or without conductive paint were examined. The relationship of electrical resistance correlating with temperature and clamping pressure was developed to aid an analysis of data trends. From the average test results of 18 groups, aided with qualitative predictions, the milliampere-to-ampere increases of current led to significant reductions in electrical conductivities in both in-plane and through-the-thickness directions. The rises of temperatures resulted in the similar reductions in electrical conductivity due to the increased resistance. The increase in clamping torque increased the electrical conductivity values in both directions. Applying conductive paint to the contact faces did not appear to affect the contact resistance. Thus, the enhanced values of electrical conductivity from the painted specimens were attributed to their lower body temperatures, as the conductive paint at the contact faces soaked up the substantial amount of the electrical energies.</p></div>","PeriodicalId":576,"journal":{"name":"Functional Composite Materials","volume":"4 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-04-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://functionalcompositematerials.springeropen.com/counter/pdf/10.1186/s42252-023-00041-3","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"4854097","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Evaluation of conductive smart composite polymeric materials for potential applicationsin structural health monitoring and strain detection","authors":"Olalla Sanchez-Sobrado,&nbsp;Daniel Rodriguez,&nbsp;Ricardo Losada,&nbsp;Elena Rodriguez","doi":"10.1186/s42252-023-00039-x","DOIUrl":"10.1186/s42252-023-00039-x","url":null,"abstract":"<div><p>The presented work collects results from the evaluation of electrical response to mechanical deformation and formation of defects presented by different polymeric based composite materials with potential for applications in Structural Health Monitoring and Strain Detection. With the aim of showing the variety of key materials in sectors like civil aviation, wind energy, automotive or railway that present this ability, specimens of very different nature have been analyzed: a) thermoplastic commercial 3D printing filaments loaded with carbonic fillers; b) epoxy resin loaded with Carbon Nanotubes and c) long carbon fiber reinforced resin composite. Measurements of electrical properties of these materials were taken to evaluate their capability to detect the presence of structural defects of different sizes as well as its spatial location. On the other hand, simultaneous measurements of electrical resistivity and mechanical strain during tensile tests were performed to analyze the potential of materials as strain detectors. All composites studied have shown a positive response (modification of electrical performance) to external mechanical stimulus: induced damage and deformations.</p><h3>Graphical Abstract</h3>\u0000 <figure><div><div><div><picture><source><img></source></picture></div></div></div></figure>\u0000 </div>","PeriodicalId":576,"journal":{"name":"Functional Composite Materials","volume":"4 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-03-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://functionalcompositematerials.springeropen.com/counter/pdf/10.1186/s42252-023-00039-x","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"5013277","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Efficient removal of safranin from aqueous solution using a new type of metalated highly self-doped polyaniline nanocomposite","authors":"Hammed H. A. M. Hassan,&nbsp;Marwa Abdel Fattah","doi":"10.1186/s42252-023-00038-y","DOIUrl":"10.1186/s42252-023-00038-y","url":null,"abstract":"<div><p>We report the chemical synthesis of poly(<i>aniline-co</i>-<i>aniline-2,5-disulfonic acid)</i>) and its composite containing L-hexuronic acid and metallic Ag/SiO₂ nanoparticles as a new thermally stable anionic polyelectrolyte for removing safranin dye. The composite was characterized by IR, UV, cyclic voltammetry, SEM, TEM, TGA, DSC, EDXS and elemental analyses. Microscopic images exhibited intensified spherical particles dispersed over almost the entire surface. The XRD exhibited peaks of the partially crystalline material at many 2θ values, and their interatomic spacing and sizes were calculated. The cyclic voltammograms exhibited characteristic redox peaks relative to the quinoid ring transition states. The uptake rates up to 82.5% adsorption were completed within 75 min and the equilibrium time was 45 min. The isotherm of dye adsorption interprets the interaction with the adsorbent and explain the relationship between the dye removal capacity and the initial dye concentration. In the current, the Langmuir isotherm model was the optimum to interpret both the dye/copolymer and the dye/composite interactions. The uptake of safranin by copolymer/SiO₂@Ag nanocomposite was well defined by pseudo second order model with rate constant K₂ = 0.03 g^− 1 mg^− 1 min^− 1 for 19 mg safranin. A comparison of safranin adsorption efficiency of the synthesized material with other reported material in the same domain suggested that the present composite has a higher adsorption rate and capacity. The ongoing research is devoted to improving the removal percentage of the dye by using 1,3,5-triazine based sulfonated polyaniline/Ag@ SiO₂ nanocomposite.</p></div>","PeriodicalId":576,"journal":{"name":"Functional Composite Materials","volume":"4 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-02-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://functionalcompositematerials.springeropen.com/counter/pdf/10.1186/s42252-023-00038-y","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"4530936","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Thermoplastic elastomer composite strips with damage detection capabilities for self-healing elastomers","authors":"Antonia Georgopoulou,&nbsp;Henry Korhonen,&nbsp;Anton W. Bosman,&nbsp;Frank Clemens","doi":"10.1186/s42252-022-00037-5","DOIUrl":"10.1186/s42252-022-00037-5","url":null,"abstract":"<div><p>Self-healing materials can increase the lifetime of products and improve their sustainability. However, the detection of damage in an early stage is essential to avoid damage progression and ensure a successful self-healing process. In this study, self-healing sensor composite strips were developed with the embedding of a thermoplastic styrene-based co-polymer (TPS) sensor in a self-healing matrix. Piezoresistive TPS sensor fibers composites (SFCs) and 3D printed sensor element composites (SECs) were fabricated and embedded in a self-healing matrix by lamination process to detect damage. In both cases, the value of the initial resistance was used to detect the presence of damage and monitor the efficiency of healing. A higher elongation at fracture could be achieved with the extruded sensor fibers. However, for the composite strips the SECs could achieve a higher elongation at fracture. Mechano-electrical analysis revealed that the strips maintained a monotonic, reproducible response after the healing of the matrix. The SFCs had significantly lower drift of the sensor signal during cyclic mechanical analysis. Nevertheless, on a tendon-based soft robotic actuator, the SECs obtained a drift below 1%. This was explained by the lower deformation (e.g.) strain in comparison to the tensile test experiments.</p></div>","PeriodicalId":576,"journal":{"name":"Functional Composite Materials","volume":"3 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://functionalcompositematerials.springeropen.com/counter/pdf/10.1186/s42252-022-00037-5","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84608440","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}