Facta Universitatis-Series Mechanical Engineering最新文献_第7页

CONVECTIVE FLOW AND HEAT TRANSFER OF NANO-ENCAPSULATED PHASE CHANGE MATERIAL (NEPCM) DISPERSIONS ALONG A VERTICAL SURFACE 纳米封装相变材料(nepcm)沿垂直表面分散的对流流动和传热

IF 7.9 2区工程技术

Facta Universitatis-Series Mechanical Engineering Pub Date : 2022-11-30 DOI: 10.22190/fume220603034g

M. Ghalambaz, Haichuan Jin, A. Bagheri, O. Younis, D. Wen

引用次数: 8

DYNAMIC CHARACTERISTICS OF MIXTURE UNIFIED GRADIENT ELASTIC NANOBEAMS 混合统一梯度弹性纳米梁的动力特性

IF 7.9 2区工程技术

Facta Universitatis-Series Mechanical Engineering Pub Date : 2022-11-30 DOI: 10.22190/fume220703035f

S. Faghidian, A. Tounsi

{"title":"DYNAMIC CHARACTERISTICS OF MIXTURE UNIFIED GRADIENT ELASTIC NANOBEAMS","authors":"S. Faghidian, A. Tounsi","doi":"10.22190/fume220703035f","DOIUrl":"https://doi.org/10.22190/fume220703035f","url":null,"abstract":"The mixture unified gradient theory of elasticity is invoked for the rigorous analysis of the dynamic characteristics of elastic nanobeams. A consistent variational framework is established and the boundary-value problem of dynamic equilibrium enriched with proper form of the extra non-standard boundary conditions is detected. As a well-established privilege of the stationary variational theorems, the constitutive laws of the resultant fields cast as differential relations. The wave dispersion response of elastic nano-sized beams is analytically addressed and the closed form solution of the phase velocity is determined. The free vibrations of the mixture unified gradient elastic beam is, furthermore, analytically studied. The dynamic characteristics of elastic nanobeams is numerically evaluated, graphically illustrated, and commented upon. The efficacy of the established augmented elasticity theory in realizing the softening and stiffening responses of nano-sized beams is evinced. New numerical benchmark is detected for dynamic analysis of elastic nanobeams. The established mixture unified gradient elasticity model provides a practical approach to tackle dynamics of nano-structures in pioneering MEMS/NEMS.","PeriodicalId":51338,"journal":{"name":"Facta Universitatis-Series Mechanical Engineering","volume":"31 1","pages":""},"PeriodicalIF":7.9,"publicationDate":"2022-11-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"75890528","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 12

MATHEMATICAL MODELLING OF THE CO2 LASER CUTTING PROCESS USING GENETIC PROGRAMMING 利用遗传规划对co2激光切割过程进行数学建模

IF 7.9 2区工程技术

Facta Universitatis-Series Mechanical Engineering Pub Date : 2022-11-30 DOI: 10.22190/fume210810003m

M. Madić, Marin Gostimirović, D. Rodić, M. Radovanovic, M. Coteață

{"title":"MATHEMATICAL MODELLING OF THE CO2 LASER CUTTING PROCESS USING GENETIC PROGRAMMING","authors":"M. Madić, Marin Gostimirović, D. Rodić, M. Radovanovic, M. Coteață","doi":"10.22190/fume210810003m","DOIUrl":"https://doi.org/10.22190/fume210810003m","url":null,"abstract":"The development of mathematical models by using experimental data is of great importance for modelling and optimization of the laser cutting process. Motivated by the lack of research regarding the use of genetic programming (GP) for deriving empirical mathematical models that describe the laser cutting process, the present study discusses the application of GP to the development of a kerf taper angle mathematical model. The aim was to quantify the relationship between three selected input parameters (cutting speed, laser power and assist gas pressure) and kerf taper angle using GP in the CO2 laser cutting of aluminium alloy AlMg3. To obtain the experimental database for the GP model evolution process, a laser cutting experiment was planned as per standard full factorial design where all three selected parameters were varied at three levels. The fit between the experimental and the GP model prediction values of kerf taper angle was found to be appropriate. Finally, by using the derived GP mathematical model, the analysis of the effects of input parameters on the change in kerf taper angle values was performed by generating 3D surface plots.","PeriodicalId":51338,"journal":{"name":"Facta Universitatis-Series Mechanical Engineering","volume":"30 1","pages":""},"PeriodicalIF":7.9,"publicationDate":"2022-11-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83099479","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 9

TOWARDS RELIABLE DECISION-MAKING IN THE GREEN URBAN TRANSPORT DOMAIN 迈向绿色城市交通领域的可靠决策

IF 7.9 2区工程技术

Facta Universitatis-Series Mechanical Engineering Pub Date : 2022-07-28 DOI: 10.22190/fume210315056s

A. Shekhovtsov, Jakub Wiȩckowski, Bartłomiej Kizielewicz, W. Sałabun

{"title":"TOWARDS RELIABLE DECISION-MAKING IN THE GREEN URBAN TRANSPORT DOMAIN","authors":"A. Shekhovtsov, Jakub Wiȩckowski, Bartłomiej Kizielewicz, W. Sałabun","doi":"10.22190/fume210315056s","DOIUrl":"https://doi.org/10.22190/fume210315056s","url":null,"abstract":"Operational research is a scientific discipline related to the decision theory that allows determining solutions for specific problems related to, for example, widely understood transport. Increasingly popular in this field are issues related to the domain of the green urban transport. In order to support the decision-making process in this area, methods of multi-criteria decision analysis (MCDA) are used more and more often. However, if we solve a specific problem using different MCDA methods, we get different rankings, as each method has a different methodological basis. Therefore, the challenge is how to make a reliable decision. This paper presents a numerical example from the green urban transport domain, which is solved by six different MCDA methods that return a complete ranking. We measure the similarity of these rankings using coefficients rw and WS, and then we propose a simple way of determining a compromise solution. The obtained compromise ranking is guaranteed to be the best match to the selected MCDA methods' rankings, which is proved in the paper. Finally, possible directions for further development work are identified.","PeriodicalId":51338,"journal":{"name":"Facta Universitatis-Series Mechanical Engineering","volume":"316 1","pages":""},"PeriodicalIF":7.9,"publicationDate":"2022-07-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76857888","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 23

MULTI-SCALE NUMERICAL APPROACH TO THE POLYMER FILLING PROCESS IN THE WELD LINE REGION 焊缝区域聚合物填充过程的多尺度数值模拟

IF 7.9 2区工程技术

Facta Universitatis-Series Mechanical Engineering Pub Date : 2022-07-28 DOI: 10.22190/fume220131021l

Xuejuan Li, Dan Wang, T. Saeed

{"title":"MULTI-SCALE NUMERICAL APPROACH TO THE POLYMER FILLING PROCESS IN THE WELD LINE REGION","authors":"Xuejuan Li, Dan Wang, T. Saeed","doi":"10.22190/fume220131021l","DOIUrl":"https://doi.org/10.22190/fume220131021l","url":null,"abstract":"In this paper, a multi-scale coupling mathematical model is suggested for simulating the polymer filling process in the weld line region on a micro scale. The model considers two aspects: one is the coupling model based on stresses in the whole cavity region; the other is the multi-scale coupling model of continuum mechanics (CM) and the molecular dynamics (MD) in a weldline region. A weak variational formulation is constructed for the finite element method (FEM), which is coupled with the Verlet algorithm based on the domain decomposition technique. Meanwhile, an overlap region is designed so that the FEM and the MD simulations are consistent with each other. The molecular backbone orientation of the whole cavity is illustrated and the position of the weld line is determined by the characteristics of the molecular backbone orientation. Finally, the properties of the polymer chain in the weld line region are studied conformationally and dynamically. The conformational changes and movement process elucidate that the polymer chains undertake stretching, entangling and orientating. Moreover, the effect of the number of chains and melt temperature on the spatial properties of chain conformation are investigated.","PeriodicalId":51338,"journal":{"name":"Facta Universitatis-Series Mechanical Engineering","volume":"99 1","pages":""},"PeriodicalIF":7.9,"publicationDate":"2022-07-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80906752","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 10

TAGUCHI OPTIMIZATION OF MULTIPLE PERFORMANCE CHARACTERISTICS IN THE ELECTRICAL DISCHARGE MACHINING OF THE TIGR2 田口优化tigr2电火花加工中的多重性能特征

IF 7.9 2区工程技术

Facta Universitatis-Series Mechanical Engineering Pub Date : 2022-07-28 DOI: 10.22190/fume201230028a

S. Akıncıoğlu

{"title":"TAGUCHI OPTIMIZATION OF MULTIPLE PERFORMANCE CHARACTERISTICS IN THE ELECTRICAL DISCHARGE MACHINING OF THE TIGR2","authors":"S. Akıncıoğlu","doi":"10.22190/fume201230028a","DOIUrl":"https://doi.org/10.22190/fume201230028a","url":null,"abstract":"Electrical discharge machining (EDM) provides many advantages for the shaping of metallic materials. It also provides better surface quality for Ti alloys used in the defense industry. In this study, experiments were carried out with different EDM parameters using the Titanium (Gr2) alloy. A number of novel industrial processes have been developed as a result of advances in technology. For a product to be developed, these novel approaches must be utilized to determine optimum parameters. The Taguchi method was applied in the experiments with EDM. The impact the test parameters had on the performance characteristics of tool wear rate, material removal rate, depth, and surface roughness were analyzed by the variance analysis (ANOVA). Quadratic regression analyses were carried out to reveal the correlation between the experimental results and the predicted values. According to the ANOVA results for material removal rate (MRR), tool wear rate (TWR), depth, and surface roughness, the most effective factor was amperage, at 99.66%, 99.56%, 87.95%, and 81.12%, respectively. The best value for average surface roughness was determined to be 3.29 µm obtained at 120 μs time-on, 8 A, and 40 μs time-off.","PeriodicalId":51338,"journal":{"name":"Facta Universitatis-Series Mechanical Engineering","volume":"54 1","pages":""},"PeriodicalIF":7.9,"publicationDate":"2022-07-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84715825","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 18

THE CARBON NANOTUBE-EMBEDDED BOUNDARY LAYER THEORY FOR ENERGY HARVESTING 能量收集的碳纳米管嵌入边界层理论

IF 7.9 2区工程技术

Facta Universitatis-Series Mechanical Engineering Pub Date : 2022-07-28 DOI: 10.22190/fume220221011h

Ji-Huan He, Nader Y. Abd Elazem

{"title":"THE CARBON NANOTUBE-EMBEDDED BOUNDARY LAYER THEORY FOR ENERGY HARVESTING","authors":"Ji-Huan He, Nader Y. Abd Elazem","doi":"10.22190/fume220221011h","DOIUrl":"https://doi.org/10.22190/fume220221011h","url":null,"abstract":"Single-walled carbon nanotubes (SWNTs) and multi-walled nanotubes (MWNTs) are gaining appeal in mechanical engineering and industrial applications due to their direct influence on enhancing the thermal conductivity of base fluids. With such intriguing properties of carbon nanotubes in mind, our goal in this work is to investigate radiation effects on the flow of carbon nanotube suspended nanofluids in the presence of a magnetic field past a stretched sheet impacted by slip state. CNTs flow and heat transmission are frequently modelled in practice using nonlinear differential equation systems. This system has been precisely solved, and an accurate analytical expression for the fluid velocity in terms of an exponential function has been derived, while the temperature distribution is stated in terms of a confluent hypergeometric function. The impact of the radiation parameter, slip parameter, sloid volume fraction, magnetic parameter, Eckart and Prandtl numbers on the velocity, temperature, and heat transfer rate profiles are demonstrated using a parametric analysis. When compared to the two types of nanoparticles (Cooper and Silver) in earlier published articles, temperature profiles for single-walled nanotubes (SWNTs) and multi-walled nanotubes (MWNTs) are revealed to be particularly sensitive to radiation, solid volume fraction, and slip parameters. Nanomechanical gears, nanosensors, nanocomposite materials, resonators, and thermal materials are only a few of the present problem's technical applications.","PeriodicalId":51338,"journal":{"name":"Facta Universitatis-Series Mechanical Engineering","volume":"39 1","pages":""},"PeriodicalIF":7.9,"publicationDate":"2022-07-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74708270","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 22

RISK PRIORITY EVALUATION OF POWER TRANSFORMER PARTS BASED ON HYBRID FMEA FRAMEWORK UNDER HESITANT FUZZY ENVIRONMENT 犹豫模糊环境下基于混合fmea框架的电力变压器零部件风险优先度评价

IF 7.9 2区工程技术

Facta Universitatis-Series Mechanical Engineering Pub Date : 2022-07-28 DOI: 10.22190/fume220223013z

Bin Zhou, Jing Chen, Qun Wu, D. Pamučar, Weizhong Wang, Ligang Zhou

{"title":"RISK PRIORITY EVALUATION OF POWER TRANSFORMER PARTS BASED ON HYBRID FMEA FRAMEWORK UNDER HESITANT FUZZY ENVIRONMENT","authors":"Bin Zhou, Jing Chen, Qun Wu, D. Pamučar, Weizhong Wang, Ligang Zhou","doi":"10.22190/fume220223013z","DOIUrl":"https://doi.org/10.22190/fume220223013z","url":null,"abstract":"The power transformer is one of the most critical facilities in the power system, and its running status directly impacts the power system's security. It is essential to research the risk priority evaluation of the power transformer parts. Failure mode and effects analysis (FMEA) is a methodology for analyzing the potential failure modes (FMs) within a system in various industrial devices. This study puts forward a hybrid FMEA framework integrating novel hesitant fuzzy aggregation tools and CRITIC (Criteria Importance Through Inter-criteria Correlation) method. In this framework, the hesitant fuzzy sets (HFSs) are used to depict the uncertainty in risk evaluation. Then, an improved HFWA (hesitant fuzzy weighted averaging) operator is adopted to fuse risk evaluation for FMEA experts. This aggregation manner can consider different lengths of HFSs and the support degrees among the FMEA experts. Next, the novel HFWGA (hesitant fuzzy weighted geometric averaging) operator with CRITIC weights is developed to determine the risk priority of each FM. This method can satisfy the multiplicative characteristic of the RPN (risk priority number) method of the conventional FMEA model and reflect the correlations between risk indicators. Finally, a real example of the risk priority evaluation of power transformer parts is given to show the applicability and feasibility of the proposed hybrid FMEA framework. Comparison and sensitivity studies are also offered to verify the effectiveness of the improved risk assessment approach.","PeriodicalId":51338,"journal":{"name":"Facta Universitatis-Series Mechanical Engineering","volume":"1 1","pages":""},"PeriodicalIF":7.9,"publicationDate":"2022-07-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82317355","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 36

EFFECTS OF ROTATION ON UNSTEADY FLUID FLOW AND FORCED CONVECTION IN THE ROTATING CURVED SQUARE DUCT WITH A SMALL CURVATURE 旋转对旋转小曲率弯曲方管内非定常流体流动和强制对流的影响

IF 7.9 2区工程技术

Facta Universitatis-Series Mechanical Engineering Pub Date : 2022-07-28 DOI: 10.22190/fume210129041a

M. Hasan, R. K. Chanda, R. Mondal, G. Lorenzini

{"title":"EFFECTS OF ROTATION ON UNSTEADY FLUID FLOW AND FORCED CONVECTION IN THE ROTATING CURVED SQUARE DUCT WITH A SMALL CURVATURE","authors":"M. Hasan, R. K. Chanda, R. Mondal, G. Lorenzini","doi":"10.22190/fume210129041a","DOIUrl":"https://doi.org/10.22190/fume210129041a","url":null,"abstract":"In recent years, the analysis of flow disposition in a curved duct (CD) has greatly attracted researchers because it is broadly used in engineering devices. In the present paper, unsteady flow characteristics of energy transfer (HT) in a rotating curved square duct (CSD) have been presented with the aid of spectral method. The key purpose of this study is to explore rotational effects and heat transfer (HT) of the duct. For this purpose, time-evolution calculation is performed over the Taylor number (-1500 ≤ Tr ≤ 1500) and other parameters are fixed; e.g., Dean number (Dn = 1000), Curvature (δ = 0.015) and Prandtl number (Pr = 7.0, for water). Firstly, time-dependent behavior is accomplished for both clockwise and anticlockwise rotations. It is found that the flow instabilities are certainly governed by the change of Tr that has been justified by sketching phase spaces (PS). To observe the flow features, velocities including axial flow (AF), secondary flow (SF) and temperature profiles are disclosed for both rotations; and it is elucidated that 2- to 6-vortex solutions are generated for physically realizable solutions. Axial flow (AF) shows that two maximum-velocity regimes are produced which induces secondary flow (SF), and, consequently, a strong bonding between the AF and SF has been built up. It is observed that as the rotation is increased, the fluid is mixed considerably which boosts HT in the fluid. Finally, an assessment between the numerical and experimental data has been given, and a good agreement is observed.","PeriodicalId":51338,"journal":{"name":"Facta Universitatis-Series Mechanical Engineering","volume":"24 1","pages":""},"PeriodicalIF":7.9,"publicationDate":"2022-07-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"79210935","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 5

THE EFFECT OF ELECTRON-BEAM TREATMENT ON THE DEFORMATION BEHAVIOR OF THE EBAM TI-6AL-4V UNDER SCRATCHING 电子束处理对ebam ti-6al-4v在划痕下变形行为的影响

IF 7.9 2区工程技术

Facta Universitatis-Series Mechanical Engineering Pub Date : 2022-07-28 DOI: 10.22190/fume211110001s

A. Shugurov, A. Nikonov, A. Dmitriev

引用次数: 1