THE EFFECT OF ELECTRON-BEAM TREATMENT ON THE DEFORMATION BEHAVIOR OF THE EBAM TI-6AL-4V UNDER SCRATCHING

IF 10.1 2区工程技术 Q1 ENGINEERING, MECHANICAL

Facta Universitatis-Series Mechanical Engineering Pub Date : 2022-07-28 DOI:10.22190/fume211110001s

A. Shugurov, A. Nikonov, A. Dmitriev

引用次数: 1

Abstract

The effect of the continuous electron beam scanning (CEBS) post-treatment on the microstructure, mechanical properties and scratching behavior of the Ti-6Al-4V alloy samples produced by electron beam additive manufacturing was studied experimentally and by using molecular dynamics simulation. It was found that the CEBS post-treatment resulted in the transformation of the microstructure of the samples from the α′-martensite into the α+β structure. The evolution of the sample microstructure was shown to provide improved mechanical characteristics as well as enhanced deformation recovery after scratching. A mechanism was proposed based on the results of molecular dynamics simulation, which attributed to the improved recovery of the scratch groves after passing the indenter to reversible β→α→β phase transformations, which occurred in the vanadium alloyed Ti crystallites.

查看原文本刊更多论文

电子束处理对ebam ti-6al-4v在划痕下变形行为的影响

通过实验和分子动力学模拟，研究了连续电子束扫描(CEBS)后处理对电子束增材制造Ti-6Al-4V合金样品显微组织、力学性能和划痕行为的影响。结果表明，CEBS后处理使试样的组织由α′-马氏体转变为α+β组织。结果表明，试样微观结构的演变提供了改进的力学特性以及增强的挠曲后变形恢复。基于分子动力学模拟的结果，提出了其机理，认为这是由于在钒合金Ti晶中，压头经过可逆的β→α→β相变后，划痕区恢复速度加快所致。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Facta Universitatis-Series Mechanical Engineering ENGINEERING, MECHANICAL-

CiteScore

14.40

自引率

2.50%

发文量

审稿时长

6 weeks

期刊介绍： Facta Universitatis, Series: Mechanical Engineering (FU Mech Eng) is an open-access, peer-reviewed international journal published by the University of Niš in the Republic of Serbia. It publishes high-quality, refereed papers three times a year, encompassing original theoretical and/or practice-oriented research as well as extended versions of previously published conference papers. The journal's scope covers the entire spectrum of Mechanical Engineering. Papers undergo rigorous peer review to ensure originality, relevance, and readability, maintaining high publication standards while offering a timely, comprehensive, and balanced review process.