Journal of Mining and Environment最新文献

{"title":"Impact assesment of mining activities on the surface and subsurface water condition of Ramgarh, Jharkhand, India by using geospatial techniques","authors":"S. Jha, P. Warwade, Sandeep Kumar Mahto","doi":"10.22044/JME.2021.10644.2048","DOIUrl":"https://doi.org/10.22044/JME.2021.10644.2048","url":null,"abstract":"This work illustrates the impact of excessive mining on the precipitation trends and ground water condition of the Ramgarh district over a period of 12 years (2007-2018). The Landsat 8 and Landsat TM- 5 data is processed under Arc-GIS in order to compare the LULC maps. Out of 7 classified classes, the Results obtained indicate the expansion of the mining area, barren land, settlement, and water body by 10.95%, 10.07%, 3.44%, and 0.43%, while a reduction in the forest, fallow, and crop land by 11.24%, 11.31%, and 2.34% respectively. The TRMM 3B43 data is used to trace out the annual precipitation values of 5 selected raster location points through Arc GIS. The annual precipitation under the mining regions (lower Mandu, Ramgarh, Bhurkunda) shows a decreasing trend. The Mann-Kendall test and Sen’s slope estimator method is used in order to evaluate the ground water pattern in the pre- and post-monsoonal conditions. The Mandu block, the densest mining region of the district with the positive Z values of 1.714 and 0.137 in the pre- and post- monsoon period shows a decrease in the ground water level at the rates of 0.103 m/year and 0.017 m/year, respectively. The continuous rise in the mining activities has created an alarming shift of weather pattern and deteriorated ground water table in Ramgarh.","PeriodicalId":45259,"journal":{"name":"Journal of Mining and Environment","volume":null,"pages":null},"PeriodicalIF":0.8,"publicationDate":"2021-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42219144","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Interaction between tunnel and surface foundation using PFC2D","authors":"V. Sarfarazi, Kaveh Asgari, S. M. B. Abad","doi":"10.22044/JME.2021.10846.2057","DOIUrl":"https://doi.org/10.22044/JME.2021.10846.2057","url":null,"abstract":"In this work, we investigate the interaction between tunnel and surface foundation in two dimensions by the particle flow code. At the first stage, the PFC calibration is conducted using the experimental test results rendered by a biaxial test. Then the simulation of a biaxial test is performed by confining a rectangular sample inside four walls. The walls are located at the top and bottom simulated loading plates and the adjacent walls are located at the left and right simulated sample side confinement. The velocities of the top and bottom walls are determined, and they are used for loading the sample in a strain-controlled mode. The respond of the material is evaluated by following the diverse stress and strain quantities. The axial deviatoric stress versus the axial strain for biaxial test on the bonded granular material is drawn, and then the Mohr's circle is drawn in order to reach the failure envelope of laboratory. Secondly, a rectangular model with dimensions of 10 m 10 m containing a central tunnel and a surface foundation is built. The tunnel is situated in sixteen different positions below the foundation. The foundation moves downward with a velocity of 0.016 mm/s. The results obtained show the position of the tunnel controlling the failure volume. Also the vertical displacement at the roof of the tunnel decreases by increasing the vertical spacing between tunnel and foundation. The settlement beneath the foundation increases by reducing the vertical spacing between the tunnel and the foundation. The settlement beneath the foundation decreases by augmenting the horizontal spacing between the tunnel and the foundation.","PeriodicalId":45259,"journal":{"name":"Journal of Mining and Environment","volume":null,"pages":null},"PeriodicalIF":0.8,"publicationDate":"2021-06-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44661206","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Challenges for In-Situ Stress Measurement in Rock Caverns by Hydraulic Fracturing and HTPF Tests-Case Study: Azad Hydropower Project","authors":"M. Shahverdiloo, S. Zare","doi":"10.22044/JME.2021.10673.2037","DOIUrl":"https://doi.org/10.22044/JME.2021.10673.2037","url":null,"abstract":"Hydraulic fracturing (HF) and hydraulic testing of pre-existing fractures (HTPF) are efficient hydraulic methods in order to determine the in-situ stress of rock mass. Generally, the minimum (Sh) and maximum (SH) horizontal principal stresses are measured by hydraulic methods; the vertical stress (SV) is calculated by the weight of the overburden layers. In this work, 37 HF and HTPF tests are conducted in a meta-sandstone, which has about 10% inter-layer phyllite. The artesian circumstance, considerable gap between the drilling and hydraulic tests in the long borehole, no underground access tunnel to rock cavern at the early stages of projects, and a simplified hypothesis theory of HF are the main challenges and limitations of the HF/HTPF measurements. Due to the instability in the long borehole, the drill rig type and borehole length are revised; also TV logger is added to the process of selection of the test’s deep. The HF/HTPF data is sequentially analyzed by the classic and inversion methods in order to achieve an optimum number of hydraulic tests. Besides, The SH magnitude in the inversion method is lower than the classic method; the relevant geological data and the faulting plan analysis lead to validate the SH and Sh magnitudes and the azimuths obtained by the classic method. The measured SH and Sh magnitudes are 7-17 MPa and 4-11 MPa, respectively; the calculated vertical stress magnitude is 6-14 MPa at the test locations. Indeed, the stress state is (SH > SV > Sh), and SH azimuth range is 56-93 degrees.","PeriodicalId":45259,"journal":{"name":"Journal of Mining and Environment","volume":null,"pages":null},"PeriodicalIF":0.8,"publicationDate":"2021-06-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48570062","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Investigation of geochemical correlation between radioactive and rare earth elements; case study of Baghak mine, NE of Iran","authors":"S. Ghannadpour, A. Hezarkhani","doi":"10.22044/JME.2021.10793.2045","DOIUrl":"https://doi.org/10.22044/JME.2021.10793.2045","url":null,"abstract":"In several uranium (U) prospecting projects in Iran, particularly Central Iran, the association and enrichment of rare earth elements (REEs) are known as the usual features. Sometimes the association of REEs and U with high economic perspective has caused that the relation between the rare earth and radioactive elements is taken into consideration in other types of mineralization, and if there is any relation, radioactivity will be applied in the exploration of REEs. In the current work, sampling from Baghak anomaly in the Sangan mines is carried out based on the radioactivity and radiation measurement methods (as the optimal sampling pattern). In fact, the goal of this work is to survey the presence or absence of such a relation in a skarn mine, which is a different case study from Central Iran. In the case of presence, this will lead to a new exploration method and sampling pattern for REEs. The mineralogical studies (based on the optical and electronic microscopic observations), statistical investigations, and geochemical analyses are applied in this research work. The results obtained from the statistical studies show that the Baghak anomaly due to involving a significant amount of U, Ce, and La and a high concentration of REEs can be considered as one of the important mines. Spider diagrams and their geochemical investigations include the features that are typical of the subduction-related magmas in the calcalkaline volcanic arcs of the continental active margins. The chondrite-normalized REE pattern shows the enrichment of LREE, and a positive pattern close to flat HREE due to the entry of LREE ions into the allanites network. The mineralogical study results also confirm that REEs (especially Ce) are accumulated as a solid solution in the allanite minerals. Moreover, from the mineralogical, geochemical, and statistical analyses, it can be observed that in addition to the presence of such a relation in the mentioned mineralization (Central Iran mineralizations), there is an acceptable correlation between these elements in the Baghak iron-skarn mineralization. Eventually, it can be said that the idea and introduced method for the exploration of REEs in this work could present a new viewpoint to the decision-makers of this industry.","PeriodicalId":45259,"journal":{"name":"Journal of Mining and Environment","volume":null,"pages":null},"PeriodicalIF":0.8,"publicationDate":"2021-06-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47947283","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"The compressive failure analysis of rock-like materials by experimental and numerical methods","authors":"M. Yavari, H. Haeri, V. Sarfarazi, M. F. Marji, H. A. Lazemi","doi":"10.22044/JME.2021.10819.2052","DOIUrl":"https://doi.org/10.22044/JME.2021.10819.2052","url":null,"abstract":"Investigating the crack propagation mechanism is of paramount importance in analyzing the failure process of most materials. This process may be exposed during each kind of loading on the materials. In this work, the cracking mechanism in rock-like materials is studied using the numerical methods and compared with the experimental test results. However, the mechanism of crack growth in brittle materials such as rocks is influenced by different parameters. This research work focuses on the effect of the initial crack angles on the crack growth paths of these materials. Some cubic samples containing pre-existing cracks are tested in compression by considering different flaw orientations. The specimens are made of cement, water, and sand. Moreover, the mentioned process is numerically simulated using three different methods: the finite difference method for discontinuous bodies or discrete element method, the displacement discontinuity method, and the versatile finite element method. The micro-parameters for simulation are gained by the trial-and-error procedure for the discrete element method. Eventually, the crack growth paths observed in the experiments are compared with the numerically simulated models. The results obtained show that these central cracks propagate in two ways, which are dependent on their initial angle. By increasing the initial crack angle to greater than 30° (α > 30°), the wing crack path moves further away from the initial crack, and by decreasing α to smaller than 30° (α < 30°), only the shear cracks are initiated. Therefore, the validity and accuracy of the results are manifested by comparing all the corresponding results obtained by different methods. Based on these results, it can generally be concluded that the strength of the cubic (rock material) specimens increases with increase in the crack angles with respect to the applied loading direction.","PeriodicalId":45259,"journal":{"name":"Journal of Mining and Environment","volume":null,"pages":null},"PeriodicalIF":0.8,"publicationDate":"2021-06-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43659197","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Stable downward continuation of airborne potential field geophysical data: an investigation of stabilizers family","authors":"M. Azadi, M. Abedi, Gholam Hossein Norouzi Baghkameh","doi":"10.22044/JME.2021.10740.2040","DOIUrl":"https://doi.org/10.22044/JME.2021.10740.2040","url":null,"abstract":"Attenuation of the signal received from sources causing anomalies and reduction of data resolution are the negative features of airborne measurements. Using a stable downward continuation method is a practical way to address these shortcomings. In this study, we investigated the efficiency of various stabilizers in achieving stable downward continued data. The purpose of this study is to select the most appropriate stabilizer(s) for this operation. We examined the various stabilizing functions by introducing them into the Tikhonov regularization problem. The results of research on synthetic airborne gravity and magnetic data showed that βL1 (the other definition of L1 norm) and SM (the smoothest model) stabilizers have the potential to be used in the stable implementation of the downward continuation method. These stabilizers performed better than the other in the three comparisons, including visual, quantitative (RMS error), and graphical comparisons. Also, by examining the airborne magnetic data related to the Esfordi district in Yazd province (Iran), it was found that in general the βL1 stabilizer is more suitable than the other stabilizing functions studied in this research.","PeriodicalId":45259,"journal":{"name":"Journal of Mining and Environment","volume":null,"pages":null},"PeriodicalIF":0.8,"publicationDate":"2021-05-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47883797","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Mineral potential modeling of porphyry copper deposits using continuously-weighted spatial evidence layers and union score integration method","authors":"Esmaeil Bahri, A. Alimoradi, M. Yousefi","doi":"10.22044/JME.2021.10668.2026","DOIUrl":"https://doi.org/10.22044/JME.2021.10668.2026","url":null,"abstract":"There are different exploration methods, each of which may introduce a number of promising exploration targets. However, due to the financial and time constraints, only a few of them are selected as the exploration priorities. Instead of the individual use of any exploration method, it is common to integrate the results of different methods in an interdependent framework in order to recognize the best targets for further exploration programs. In this work, the continuously-weighted evidence maps of proximity to intrusive contacts, faults density, and stream sediment geochemical anomalies of a set of porphyry copper deposits in the Jiroft region of the Kerman Province in Iran are first generated using the logistic functions. The weighted evidence maps are then integrated using the union score integration function in order to model the deposit type in the studied area. The weighting and integration approaches applied avoid the disadvantages of the traditional methods in terms of carrying the bias and error resulting from the weighting procedure. Evaluation of the ensuing prospectivity model generated demonstrate that the prediction rate of the model is acceptable, and the targets generated are reliable to follow up the exploration program in the studied area.","PeriodicalId":45259,"journal":{"name":"Journal of Mining and Environment","volume":null,"pages":null},"PeriodicalIF":0.8,"publicationDate":"2021-04-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48014550","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Direct and indirect bioleaching of Co and Ni from iron rich laterite ore using Delftia acidovorans and Acidithiobacillus ferrooxidans","authors":"M. H. Nasab, M. Noaparast, H. Abdollahi","doi":"10.22044/JME.2021.10528.2002","DOIUrl":"https://doi.org/10.22044/JME.2021.10528.2002","url":null,"abstract":"In this research work, the bio-leaching of Co and Ni from an iron-rich laterite ore is assessed using the acidophilic heterotrophic (Delftia acidovorans)and autotrophic (Acidithiobacillus ferrooxidans) bacteria. The metabolic products of the acidophilic bacteria play an important role in bio-leaching. The results obtained from the indirect bio-leaching indicate the highest nickel recoveries of up to 83.65% and 80.18%, respectively, by the supernatants of Acidithiobacillus ferrooxidans and Delftia acidovorans, both measured at 90 °C for 3 h with a stirring speed of 370 rpm and S/L of 0.1, while the corresponding cobalt recovery rates have reached 86.93% and 83.94%, respectively. The iron dissolution rates in these conditions for the two studied bacteria are 64.34% and 54.41%, respectively. The nickel and cobalt extractions by the indirect bio-leaching of Delftia acidovorans are, respectively, 29.84% and 23.75% higher than those for the direct bio-leaching, performed at 30 °C and 150 rpm of an incubator shaker for 30 days. For the indirect bio-leaching, the chemical control has a larger influence on the dissolution rate of the iron-rich laterite compared to the diffusion control. The activation energies of nickel and cobalt in the chemical control model are 40.07 and 39.08 kJ/mol, respectively.","PeriodicalId":45259,"journal":{"name":"Journal of Mining and Environment","volume":null,"pages":null},"PeriodicalIF":0.8,"publicationDate":"2021-04-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43310819","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Optimizing Extreme Learning Machine Algorithm using Particle Swarm Optimization to Estimate Iron Ore Grade","authors":"M. Fathi, A. Alimoradi, H. R. H. Ahooi","doi":"10.22044/JME.2021.10368.1984","DOIUrl":"https://doi.org/10.22044/JME.2021.10368.1984","url":null,"abstract":"Scientific uncertainties make the grade estimation very complicated and important in the metallic ore deposits. This paper introduces a new hybrid method for estimating the iron ore grade using a combination of two artificial intelligence methods; it is based on the single layer-extreme learning machine and the particle swarm optimization approaches, and is designed based on the location of the boreholes, depth of the boreholes, and drill hole information from an orebody, and applied for the ore grade estimation on the basis of a block model. In this work, the two algorithms of optimization clustering and neural networks are used for the iron grade estimation in the Choghart iron ore north anomaly in the central Iran. The results of the training and testing the algorithms indicate a significant ability of the optimized neural network system in the ore grade estimation.","PeriodicalId":45259,"journal":{"name":"Journal of Mining and Environment","volume":null,"pages":null},"PeriodicalIF":0.8,"publicationDate":"2021-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48771895","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Rock Fall Hazard Assessment using GeoRock 2D along Swat Motorway, Pakistan","authors":"M. Adil, S. Raza, Ibrahim Amin","doi":"10.22044/JME.2021.10599.2011","DOIUrl":"https://doi.org/10.22044/JME.2021.10599.2011","url":null,"abstract":"Despite the slope stability measures, rock falls are witnessed at section KM-37 of the Swat motorway (M-16), Khyber Pakhtunkhwa, Pakistan. The geotechnical data analysis of the site reveals that although the chances of plane/slope failures are reduced from 43% to 23% with the help of the existing design, still there are possibilities of rock fall at the sight, which has also been witnessed during the field visits. The rock fall hazards are assessed through field tests and simulation, and significant stabilization measures are suggested. The rock fall tests are conducted, and then using the data obtained, the rock fall simulation is carried out using GeoRock 2D®. From a combination of the kinematic analysis and rock fall simulation, the hazard level along the slope ranges from moderate to high. The reason for this is the increasing velocity of the falling boulder and the impact of energy at the bottom of the slope. This is an indication of the risk, as the most hazardous area is at the toe of the slope, where the highway road is the main element at risk. Rock boulders of different shapes and sizes are released from a couple of benches in order to check their impacts on the highway. Based on the simulation, it is concluded that the spherical shaped boulders are released from higher benches covering more horizontal distances and reaching the highway with a higher bouncing heights at the toe of the slope than the cylindrical shaped boulders. The maximum bounce height of 7 m has been recorded at the toe of the slope. In order to reduce the impacts of energy and bounce heights of the boulders striking the slope surface, certain mitigation measures are suggested like a ditch of a specific size filled with sand or fine debris at the toe of the slope. Draping wire mesh on the slope surface and a retaining wall or fence would be greatly helpful and economical to reduce the rock falling hazards along the road side at section KM-37 of the Swat motorway.","PeriodicalId":45259,"journal":{"name":"Journal of Mining and Environment","volume":null,"pages":null},"PeriodicalIF":0.8,"publicationDate":"2021-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42356742","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}