Devices and Methods of Measurements最新文献

{"title":"Structural Solutions that Increase the Dynamic Accuracy of a Wave Solid-State Gyroscope","authors":"Дмитрий Михайлович Малютин","doi":"10.21122/2220-9506-2021-12-2-146-155","DOIUrl":"https://doi.org/10.21122/2220-9506-2021-12-2-146-155","url":null,"abstract":"The development of wave solid-state gyroscopes (VTG) is one of the promising areas of development of gyroscopic angular velocity sensors. VTG from the standpoint of manufacturing technology, tuning and control systems, as well as accuracy characteristics, has a number of advantages compared to other types of gyroscopes. When developing VTG, they strive to reduce the gyroscope's own care, zero signal bias, and the non-linearity of the scale factor in the operating temperature range However, when creating the device, due attention is often not paid to the existing opportunities to improve the dynamic accuracy of the gyroscope by developing promising structural solutions for building control circuits and information processing. The solution to this problem was the goal of the work.Using the methods of the theory of automatic control, the dynamics of a wave solid-state gyroscope with a metal resonator and piezoelectric elements in the closed-loop mode of Сoriolis acceleration compensation are studied. Piezoelectric elements perform the functions of displacement and force sensors.Two promising structural solutions for constructing VTG control and information processing circuits are proposed and considered. Relations are established for selecting the parameters of the links of these contours, which provide an increase in the dynamic accuracy of the gyroscope. In the first case, the proposed structure for constructing the VTG allows us to significantly reduce the dynamic errors caused by the difference in the scale coefficient of the VTG at different frequencies of the measured angular velocity in the bandwidth. Such a structure for constructing a VTG can be recommended when solving a measurement problem in which it is necessary to accurately measure the angular velocity, and the phase lag of the output signal in relation to the measured angular velocity is of secondary importance. In the second case, the proposed structure of the VTG construction corresponds to the transfer function of the relative measurement error with secondorder astatism, and the absolute measurement error in the frequency band of 10 Hz does not exceed 0.1 %.","PeriodicalId":41798,"journal":{"name":"Devices and Methods of Measurements","volume":null,"pages":null},"PeriodicalIF":0.4,"publicationDate":"2021-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"89040008","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Measurement of the Probability of a Binary Symbol «0» Erasing in a Single-Photon Asynchronous Communication Channel with a Receiver Based on a Photon Counter","authors":"A. M. Timofeev","doi":"10.21122/2220-9506-2021-12-2-156-165","DOIUrl":"https://doi.org/10.21122/2220-9506-2021-12-2-156-165","url":null,"abstract":"Receiving modules of single-photon communication channels should provide the least loss of transmitted information when measuring low-power optical signals. In this regard, it is advisable to use photon counters. They are highly sensitive, but are characterized by data logging errors. Therefore, the purpose of this work was to investigate the effect of the intensity of the recorded optical radiation during the transmission of binary symbols «0» on the probability of erasing these symbols in a single-photon communication channel containing a photon counter based on an avalanche photodetector as a receiving module with a passive avalanche suppression scheme.The lower and upper threshold levels of pulses recorded at the output of the photon counter, as well as the statistical distributions of the mixture of the number of dark and signal pulses at the output of the photon counter when registering binary symbols «0» Pst0( N ) and «1» Pst1( N ) were determined. For this, a technique was used to reduce information loss. As a result, the minimum probability of erasing binary symbols «0» P(–/0) was achieved.The performed experimental results showed that to achieve the minimum probability of erasing binary symbols «0» P(–/0) = 0,11·10−2, it is important to select not only the intensity of the used optical radiation J , but also the supply voltage of the avalanche photodetector U, at which the dead time of the photon counter is −2 minimal, and its quantum detection efficiency is maximum: J0 ≥ 98,94·10−2 rel. units and U = 52,54 V. ","PeriodicalId":41798,"journal":{"name":"Devices and Methods of Measurements","volume":null,"pages":null},"PeriodicalIF":0.4,"publicationDate":"2021-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"75092839","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Impulsively-Laser Excitation and Propagation of Ultrasonic Waves through Nanomagnetic Fluid","authors":"A. Baev, A. I. Мitkovets, M. Asadchaya, A. Mayorov","doi":"10.21122/2220-9506-2021-12-3-211-219","DOIUrl":"https://doi.org/10.21122/2220-9506-2021-12-3-211-219","url":null,"abstract":"Magnetic fluids belong to the class of nanomaterials with a high gain of light absorption, aggregative and sedimentation stability as well as controllability by external fields, which is of interest to use in the field of optoacoustics. The purpose of the work was to experimentally study the effect of the optoacoustic transformation in a magnetic fluid, depending on the concentration of magnetic colloidal particles, boundary conditions, intensity of the laser as well as to identify the possibilities of using the magnetic fluid as an element of the optoacoustic transformation in a number of applications.A brief analysis of the optoacoustic transformation mechanism in a magnetic fluid was carried out and a technique and an installation that implements the shadow measurement variant developed. A Lotis type laser was used as a source of ultrasonic pulse-laser excitation in magnetic fluids. A quartz and air were used as a material transmitting the energy of laser radiation in a magnetic fluid. Receiving of ultrasound signals was made by a piezoelectric probe at a working frequency of 5 MHz. In the measurement process, the concentration of the dispersed phase in tmagnetic fluid was varied from zero to 8 % and the energy in the impulse – from zero to 10 mJ.For the first time, it was established that: a) an amplitude of the function of the optoacoustic transformation in a magnetic fluid, depending on the concentration of the dispersed phase, has a maximum determined by the fluid physical properties and boundary conditions; b) for all samples within the measurement error, a quasilinear dependence of the specified amplitude of energy in the laser pulse in the range of 0–8 MJ has been established.A number ways of the optoacoustic effects in magnetic fluids to use in ultrasonic testing, measuring the intensity of the laser radiation had been suggested.","PeriodicalId":41798,"journal":{"name":"Devices and Methods of Measurements","volume":null,"pages":null},"PeriodicalIF":0.4,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83380263","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Digital Spectral Analysis by means of the Method of Averag Modified Periodograms Using Binary-Sign Stochastic Quantization of Signals","authors":"V. Yakimov","doi":"10.21122/2220-9506-2021-12-3-220-221","DOIUrl":"https://doi.org/10.21122/2220-9506-2021-12-3-220-221","url":null,"abstract":"The method of averaging modified periodograms is one of the main methods for estimating the power spectral density (PSD). The aim of this work was the development of mathematical and algorithmic support, which can increase the computational efficiency of signals digital spectral analysis by this method.The solution to this problem is based on the use of binary-sign stochastic quantization for converting the analyzed signal into a digital code. A special feature of this quantization is the use of a randomizing uniformly distributed auxiliary signal as a stochastic continuous quantization threshold (threshold function). Taking into account the theory of discrete-event modeling the result of binary-sign quantization is interpreted as a chronological sequence of instantaneous events in which its values change. In accordance with this we have a set of time samples that uniquely determine the result of binary-sign quantization in discrete-time form. Discrete-event modeling made it possible to discretize the process of calculating PSD estimates. As a result, the calculation of PSD estimates was reduced to discrete processing of the cosine and sine Fourier transforms for window functions. These Fourier transforms are calculated analytically based on the applied window functions. The obtained mathematical equations for calculating the PSD estimates practically do not require multiplication operations. The main operations of these equations are addition and subtraction. As a consequence, the time spent on digital spectral analysis of signals is reduced.Numerical experiments have shown that the developed mathematical and algorithmic support allows us to calculate the PSD estimates by the method of averaging modified periodograms with a high frequency resolution and accuracy even for a sufficiently low signal-to-noise ratio. This result is especially important for spectral analysis of broadband signals.The developed software module is a problem-oriented component that can be used as part of metrologically significant software for the operational analysis of complex signals.","PeriodicalId":41798,"journal":{"name":"Devices and Methods of Measurements","volume":null,"pages":null},"PeriodicalIF":0.4,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"87875230","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Evaluation of the Magnet Breakaway Force Measurement Accuracy of the NT-800 Sensors for Early Detection of Defects of Their Manufacturing","authors":"A. Kutsepau, A. Kren, Y. V. Hnutsenka","doi":"10.21122/2220-9506-2021-12-3-230-238","DOIUrl":"https://doi.org/10.21122/2220-9506-2021-12-3-230-238","url":null,"abstract":"Сontrol of mechanical stresses formed with the deposition of nickel coatings plays an important role in the diagnosis of coatings’ technical condition. Large internal stresses can lead to cracking or flaking of coatings which is completely unacceptable for critical parts and assembly units used, for example, in space technology for which reliability is of paramount importance. An important aspect of internal stresses monitoring is the measurement error of the instruments used. The purpose of this work was to determine the characteristics of the device sensors, which make the assessment of their manufacturing possible at the preliminary stage of the measuring equipment assembling in order to maintain the required accuracy of subsequent measurements.In most cases the measurement error assessment is possible only after the equipment manufacture and calibration. In this paper it is proposed to evaluate the accuracy characteristics of device sensors based on the precision (repeatability and reproducibility) of the primary informative parameter recording. In the case of the NT-800 device that was developed at the Institute of Applied Physics of the National Academy of Sciences of Belarus the effect of precision characteristics deterioration on the eventual measurement error is demonstrated. Determining the precision parameters before establishing correlation dependences between the primary informative parameter and the measured characteristic is proposed in order to reject poorly manufactured sensors and reduce labor costs.In particular, measurements of the magnitude proportional to the magnetic breakaway force were carried out using the NT-800 device with nickel specimens simulating coatings with a thickness of 200 to 700 μm and a rolling value from 0 to 40 %. It was established that in the case of well-made sensors the variation coefficient calculated from the dispersion of repeatability is in the range 0.2–0.6 %, and the variation coefficient calculated from the dispersion of reproducibility does not exceed 0.9 %. In the case of a sensor with the sensitive element parameters worsened, the variation coefficient of repeatability and reproducibility were up by one and a half times. Deterioration of the precision characteristics resulted in significant changes in the readings of the calibrated instrument. Thus the absolute measurement error for a sensor with a poorly made sensitive element turned out to be approximately 3 times higher in the range of 200– 300 MPa than that for a sensor with good precision parameters.","PeriodicalId":41798,"journal":{"name":"Devices and Methods of Measurements","volume":null,"pages":null},"PeriodicalIF":0.4,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84452985","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Determination of the Error in Transferring of Length Unit’s Size when Measuring the Nanoparticles’ Diameter Using an Analyzer of Particles’ Differential Electrical Mobility","authors":"V. L. Solomakho, A. A. Bagdun","doi":"10.21122/2220-9506-2021-12-3-194-201","DOIUrl":"https://doi.org/10.21122/2220-9506-2021-12-3-194-201","url":null,"abstract":"The quality of nanomaterials and nanotechnologies is largely determined by the stability of the applied technologies, which, to a large extent, depend on the constancy of particle sizes. In this regard, metrological problems arise that are associated both with measuring the dimensions of the microstructure of aerosols, suspensions and powders, and with ensuring the uniformity of measurements when transferring a unit of a physical quantity from a standard to working measuring instruments. The purpose of this work was to determine and calculate the error in transferring the size of a unit of length when measuring the diameter of nanoparticles.An analyzer of differential electric mobility of particles was determined as a reference measuring instrument for which the calculation was made. It allows the separation of aerosol particles based on the dependence of their electrical mobility on the particle size. In combination with a condensation particle counter, it allows you to scan an aerosol and build a particle size distribution function. This measurement method is the most accurate in the field of measuring the diameters of particles in aerosols, therefore, the error in the transmission of particle size must be set as for a standard.The paper describes the physical principles of measurement by this method and presents an equation for determining the diameter of nanoparticles. Based on this equation, the sources of non-excluded systematic error were identified. Also, an experimental method was used to determine the random component of the measurement error of nanoparticles and to calculate the error in transferring the size of a unit of length when measuring the diameter of nanoparticles.The obtained results will be used for metrological support of standard samples of particle size, ensuring traceability of measurements of aerosol particle counters and for aerosol research.","PeriodicalId":41798,"journal":{"name":"Devices and Methods of Measurements","volume":null,"pages":null},"PeriodicalIF":0.4,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76751737","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Calculation of the Effective Energy Release Centerʼs Position of Inorganic Scintillation Detectors for Calibration at Small “Source–Detector” Distances","authors":"R. Lukashevich, G. Fokov","doi":"10.21122/2220-9506-2021-12-3-239-248","DOIUrl":"https://doi.org/10.21122/2220-9506-2021-12-3-239-248","url":null,"abstract":"Inorganic scintillation detectors are widely used to measure of dose rate in the environment due to their high sensitivity to photon radiation. A distinctive feature when using such detectors is the need to take into account of the position of the effective energy release center. This peculiarity is actual when using measuring instruments with inorganic scintillation detectors as working standards during calibration at short “source–detector” distances in conditions of low-background shield or using a facility with protection from external gamma radiation background in the dose rate range from 0.03 to 0.3 μSv/h (μGy/h). The purpose of this work was to calculate the position of the effective energy release center of NaI(Tl) scintillation detectors and to take it into account when working at short “source–detector” distances.An original method of determining the position of the effective energy release center when irradiating the side and end surfaces of inorganic scintillation detector with parallel gamma radiation flux and point gamma radiation sources at small “source–detector” distances using Monte Carlo methods is proposed. The results of calculations of the position of the effective energy release center of NaI(Tl) based detectors of “popular” sizes for the cases of parallel gamma radiation flux and point sources of gamma radiation at small “source–detector” distances are presented. The functional dependences of the position of the effective energy release center of NaI(Tl) based detectors on the distance to the point gamma radiation sources and the energy of gamma radiation sources are presented.As a result of the study it was found that for scintillation NaI(Tl) detectors of medium size (for example, Ø25×40 mm or Ø40×40 mm) the point gamma radiation source located at a distance of 1 m or more, creates a radiation field which does not differ in characteristics from the radiation field created by a parallel flux of gamma radiation. It is shown that approaching the point gamma radiation source to the surface of scintillation detector leads to displacement of the position of the effective energy release center to the surface of the detector.","PeriodicalId":41798,"journal":{"name":"Devices and Methods of Measurements","volume":null,"pages":null},"PeriodicalIF":0.4,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84296887","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Expanding of Excimer Laser Photoablation’s Functionality in Ophthalmology","authors":"V. A. Alekseev, V. G. Kostin, A. Usoltseva, V. Usoltsev, S. I. Yuran","doi":"10.21122/2220-9506-2021-12-3-175-182","DOIUrl":"https://doi.org/10.21122/2220-9506-2021-12-3-175-182","url":null,"abstract":"One of the significant weaknesses of excimer laser-based vision correction devices is the difficulty of achieving a required change in the refractive properties of the cornea to sharply focus the image on the retina with distance from the working area (ablation zone) center to the periphery due to a change in the laser beam incidence angle. The study is aimed at improving the quality of laser action on the eye cornea by introducing an optical corrective system into the existing excimer laser vision correction equipment, ensuring the coincidence of the direction of the laser beam incidence on the corneal surface with the normal.It has been shown that the greater the reflection coefficient, the lower the absorbed energy, and the shallower the laser radiation penetration and ablation depths, which reduces the laser action opportunities and quality. When using excimer laser vision correction devices, it has been proposed to change the angle of the laser beam incidence on the cornea with a distance from the working area (ablation zone) center to the periphery during the surgery by introducing an optical corrective system based on a lightweight controllable and movable mirror, which allows achieving the coincidence of the direction of the laser beam incidence on the corneal surface with the normal.The studies have shown that the coincidence of the laser beam incidence on the corneal surface at any point with the normal when using a priori data on the specifics of the patient's eye allows expanding the functional opportunities of excimer laser photoablation, i. e., expand the ablation zone by 30 % and eliminate the possibility of errors caused by the human factor. The technique proposed can be used for excimer laser vision correction according to PRK, LASIK, Femto-LASIK, and other methods. To implement this approach, a patented excimer laser vision correction unit has been proposed with a PCcontrolled optical shaping system comprising galvo motor platforms and galvo mirrors installed on them.","PeriodicalId":41798,"journal":{"name":"Devices and Methods of Measurements","volume":null,"pages":null},"PeriodicalIF":0.4,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83892972","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Application of Electrical Impedance Measurements’ Method for Studies of Bubble Flows","authors":"I. Konovalov, A. Chesnokov, A. Barinov, S. Dmitriev, A. Khrobostov, M. Makarov","doi":"10.21122/2220-9506-2021-12-3-183-193","DOIUrl":"https://doi.org/10.21122/2220-9506-2021-12-3-183-193","url":null,"abstract":"One of the important tasks in carrying out a computational justification of the reliability and safety of equipment that is part of the projected nuclear power plants today is the modeling of the bubbly regime of the coolant flow. In this regard the aim of this work is the use of extended methods of using matrix conductometric systems which are widespread in research practice for study of gas-liquid flows.The work uses a method of primary processing of experimental data aimed at eliminating of excess conductivity in the cells of the developed wire mesh sensor which makes it possible to obtain the values of the true volumetric gas content in the investigated area.Subsequent analysis of the possibilities to estimate the volumes of registered gas bubbles by the gradient method as well as the size of the interface in the sensor cells which plays a key role in modeling the interfacial heat and mass transfer.Comparison of readings values with the control instruments cues showed a good agreement. The presented work is an adaptation of the use of a conductometric measuring system for the study of multicomponent flows with the aim of further application for the study of two-component flows in the channels of the core simulator using wire mesh sensors.","PeriodicalId":41798,"journal":{"name":"Devices and Methods of Measurements","volume":null,"pages":null},"PeriodicalIF":0.4,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90471166","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Capabilities for Probing of Upper Atmosphere Density Variations and Seismic-Orbital Effects Using Small-Size Spacecraft","authors":"A. V. Tertyshnikov","doi":"10.21122/2220-9506-2020-11-4-305-312","DOIUrl":"https://doi.org/10.21122/2220-9506-2020-11-4-305-312","url":null,"abstract":"The miniature spacecraft have a high ballistic coefficient, which is advantageous for the resolution of sensing the density  of  the  upper  atmosphere.  The  purpose  of  this  work  is  to  show  new  features of the \"falling spheres method\" based on the miniaturization of the Spacecraft. The \"falling spheres method\" is used to probe variations in the density of the upper atmosphere.A technical solution for diagnostics of orbital sections with abnormal changes in the speed and acceleration of  spacecraft  equipped  with  onboard  navigation  receivers  and  micro-accelerometers is considered.The technical result of the proposed development is the efficiency and cost – effectiveness of sounding variations in the density of the upper atmosphere, seismic-orbital effects-variations in the density of the atmosphere over earthquake-regions and the seismic hazard.","PeriodicalId":41798,"journal":{"name":"Devices and Methods of Measurements","volume":null,"pages":null},"PeriodicalIF":0.4,"publicationDate":"2020-12-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"75441077","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}