S. Prasetyowati, Bustanul Arifin, A. A. Nugroho, Muhammad Khosyi'in
{"title":"Exploration of Generator Noise Cancelling Using Least Mean Square Algorithm","authors":"S. Prasetyowati, Bustanul Arifin, A. A. Nugroho, Muhammad Khosyi'in","doi":"10.18196/jet.v6i1.14826","DOIUrl":"https://doi.org/10.18196/jet.v6i1.14826","url":null,"abstract":"Generator noise can be categorized as monotonous noise, which is very annoying and needs to be eliminated. However, noise-cancelling is not easy to do because the algorithm used is not necessarily suitable for each noise. In this study, generator noise was obtained by recording near the generator (outdoor signal) and from the room (indoor signal). Noise generator exploration is carried out to determine whether the noise signal can be removed using the Adaptive LMS method. Exploration was carried out by analyzing statistical signals, spectrum with Fast Fourier Transform (FFT) and Inverse FFT (IFFT), and analyzing the frequency distribution of the remaining noise. The results showed that the correlation coefficients were close to each other. Outdoor and indoor signals are at low frequency. The behavior of FFT and IFFT if described in two dimensions, namely real and imaginary axes, formed a circle with a zero center and has parts that come out of the circle. It confirms that noise-cancelling with adaptive LMS can be realized well even though some noise is still left. The residual noise has formed an impulse that showed normally distributed with mean=-0.0000735 and standard deviation =0.000735. This indicates that the residual noise was no longer disturbing.","PeriodicalId":402105,"journal":{"name":"Journal of Electrical Technology UMY","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130660902","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"3D Orientation Estimation Using Inertial Sensors","authors":"Lu Bai","doi":"10.18196/jet.v6i1.14638","DOIUrl":"https://doi.org/10.18196/jet.v6i1.14638","url":null,"abstract":"Recently, inertial sensors have been widely used in the measurement of 3D orientations because of their small size and relative low cost. One of the useful applications in the area of Neurorehabilitation is to assess the upper limb motion for patients who are under neurorehabilitation. In this paper, the computation of the 3D orientation is discussed utilising the outputs from accelerometers, gyroscopes and magnetometers. Different 3D orientation representations are discussed to give recommendations for different use scenarios. Based on the results form the 3D orientation, 2D and 3D position tracking techniques are also calculated by considering the joint links and kinematics constraints from the upper limb segments. The results showed that the performance using complementary filter can make good estimation of the orientation. ","PeriodicalId":402105,"journal":{"name":"Journal of Electrical Technology UMY","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130340127","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Voice Recognition Security Reliability Analysis Using Deep Learning Convolutional Neural Network Algorithm","authors":"W. Ibrahim, Henry Candra, Haris Isyanto","doi":"10.18196/jet.v6i1.14281","DOIUrl":"https://doi.org/10.18196/jet.v6i1.14281","url":null,"abstract":"This study discusses the reliability analysis of voice recognition security using the deep learning convolutional neural network (CNN) algorithm. The CNN algorithm has learning advantages in that it is safer, faster, and more accurate. CNN also can solve user identification problems in large amounts of data. The measured voice input is ten types of user's voice with the number of iterations of 6000, 12000, and 15000 sound files. Furthermore, voice extraction features are performed to recognize conversations and retain information that is very much needed. After that, the voice file iteration data is trained to register the user's voice so that a trained model is obtained. These results measure performance (confusion matrix) to analyze the actual value compared to the predicted value in the CNN algorithm. The results obtained are that the best accuracy is obtained at 15000 sound file iterations, 96.87%, 12000 sound file iterations get 96.30%, and 6000 sound file iterations get 95.77%. CNN's performance data shows that 15000 iterations of voice files produce high accuracy. Voice recognition security helps provide high security and maintain the privacy of one's identity.","PeriodicalId":402105,"journal":{"name":"Journal of Electrical Technology UMY","volume":"17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121315434","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Load Flow Analysis After the Entry of Renewable Power Plants in the Sulselrabar System","authors":"M. Djalal, Makmur Saini, A. Yunus","doi":"10.18196/jet.v5i2.12897","DOIUrl":"https://doi.org/10.18196/jet.v5i2.12897","url":null,"abstract":"Power flow analysis in an electric power system is an analysis that reveals the performance of an electric power system and the flow of power (active and reactive) for certain conditions when the system is working. The analysis was carried out using the ETAP 16.00 software, the method used was the newton rapshon by taking a case study of normal conditions. From the results of the study, it can be seen that the power flow that occurs in each channel of the 150 kV system in the South Sulawesi system. The amount of active power (MW) that occurs during normal conditions based on the simulation is 1730.87 MW, where the active power is the largest, which is 171 MW from BUS15_TLASA to BUS13_SGMNSA. For the voltage data, there is a slight comparison of the voltage during the simulation compared to the PLN data.","PeriodicalId":402105,"journal":{"name":"Journal of Electrical Technology UMY","volume":"58 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121508187","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Imran, I. Robandi, F. Firdaus, R. Ruslan, M. Y. Mappeasse, M. Djalal
{"title":"Membership Function Optimization of Fuzzy Inference System Using Cuckoo Search Algorithm for Peak Load Forecasting in National Holiday","authors":"A. Imran, I. Robandi, F. Firdaus, R. Ruslan, M. Y. Mappeasse, M. Djalal","doi":"10.18196/jet.v5i2.12889","DOIUrl":"https://doi.org/10.18196/jet.v5i2.12889","url":null,"abstract":"This study aims to analysis peak load prediction of Indonesian national holidays for Jawa-Bali electricity system. Forecasting applied using the Fuzzy Logic System (FLS) method combined with the Cuckoo Search Algorithm (CSA). CSA is used to determine the optimal membership function in fuzzy logic. Cuckoo search algorithm has a very good performance in terms of optimization. This method is applied for short-term load estimates on holidays/special days on the Jawa-Bali electricity system, Indonesia. The study used data from daily peak loads during Indonesian national holidays in 2014 on the Jawa-Bali electricity system. The data analyzed is the daily peak load documentation data for 4 days before national holidays and during national holidays in 2014. Testing the simulation results, it was found that the Fuzzy Logic System - Cuckoo Search Algorithm (FLS-CSA) method gives good forecasting results, this is evidenced by using the mean absolute percentage error (MAPE). Forecasting results using the Cuckoo Search Algorithm (CSA) optimization method on fuzzy logic membership functions for peak loads on national holidays on the Java-Bali 500kV electrical system give satisfactory results with an average forecasting error of 1.511314562%.","PeriodicalId":402105,"journal":{"name":"Journal of Electrical Technology UMY","volume":"130 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124623643","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Analysis of Overcurrent Safety in Miniature Circuit Breaker with Alternating Current","authors":"J. Jamaaluddin, I. Anshory, Shazana Dhiya Ayuni","doi":"10.18196/jet.v5i2.12508","DOIUrl":"https://doi.org/10.18196/jet.v5i2.12508","url":null,"abstract":"In the utilization of solar energy, the equipment used includes Photovoltaic Cells, solar charging controls, batteries, protection devices, and other measuring devices. This solar power generation system is the name of a system that can convert solar energy into electric power. This solar power plant used in buildings is referred to as the Solar Building System (SBS). To perfect this solar power generation system, it is necessary to manage the electric power protection system. The protection system in this solar power plant includes the use of Miniature Circuit Breakers (MCB). This Miniature Circuit Breaker is a tool for overcurrent protection in alternating current systems and direct current systems. In order to obtain a good protection system for this solar power plant, a study was conducted on the use of a miniature circuit breaker that is effective for a certain type of current. The research method used is the use of alternating current and direct current miniature circuit breakers in alternating current circuits. Observations and recordings were carried out, so that the obtained results were quite significantly different in their use. From the results of the study, it was found that the Miniature alternating current circuit breaker has better characteristics in alternating current circuits, when compared to direct current miniature circuit breakers.","PeriodicalId":402105,"journal":{"name":"Journal of Electrical Technology UMY","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122275607","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Disinfectant Spraying Robot to Prevent the Transmission of the Covid-19 Virus Based on the Internet of Things (IoT)","authors":"I. Sulistiyowati, Mohd. Muhyiddin","doi":"10.18196/jet.v5i2.12363","DOIUrl":"https://doi.org/10.18196/jet.v5i2.12363","url":null,"abstract":"One way to prevent the transmission and spread of Covid-19 is to always keep ourselves and our environment clean. Maintaining personal and environmental hygiene can be done by using antiseptics and disinfectants. Disinfectants that are not used properly will be bad for humans. That is why so far the spraying of disinfectants for the prevention of COVID-19 has been carried out by human workers who are dressed in complete Personal Protective Equipment (PPE) using manual sprayers. This is certainly very risky to humans who do the spraying manually. The objective of this research is to minimize the risk of spraying disinfectants, by using a robotic power to spray disinfectant based on the Internet of Things (IoT) and a camera. This robot is operated by using a smartphone while to determine the environmental conditions around it is used a camera. From the test results, it obtained data that the robot works well and is quite reliable due to the wider scope limit because it uses an IoT connection to communicate with smartphones. The results of camera readings on laptops are also quite clear, although the higher the resolution on the display, the lag time required to transfer images to the laptop affects.","PeriodicalId":402105,"journal":{"name":"Journal of Electrical Technology UMY","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128037784","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Haris Isyanto, Jumail Jumail, Rahayu Rahayu, Nofian Firmansyah
{"title":"Design of Monitoring Device for the Process of Organic Waste Decomposition into Compost Fertilizer and Plant Growth through Smartphones based on Internet of Things Smart Farming","authors":"Haris Isyanto, Jumail Jumail, Rahayu Rahayu, Nofian Firmansyah","doi":"10.18196/jet.v5i2.12815","DOIUrl":"https://doi.org/10.18196/jet.v5i2.12815","url":null,"abstract":"Based on data published by the Ministry of Living Environment and Forestry in 2020, Indonesia produces at least 93,200 tons of waste per day in various types of composition or around 34 million tons of waste per year. From the collection of waste, it could be used as compost fertilizer which is taken from leaf waste. From these problems, a device was designed that could monitor the decomposition process of organic waste into compost fertilizer. This device is equipped with a temperature sensor, humidity sensor, sensor of soil pH, soil moisture sensor, and color sensor to monitor the composting fertilizer process. The device could also detect plant growth as an indication that the compost fertilizer made is in good condition. Our device was used on the Internet of Things (IoT) and the blynk application as a monitoring application. From the test results, the temperature sensor's accuracy is 98.2%, the humidity sensor is 96.1%, the soil pH sensor is 95.26%, the soil moisture sensor is 98.55%, and the color sensor successfully detects the results of plant growth well. The design of this device is expected to invite the public to be wiser in sorting waste and using it for the surrounding environment.","PeriodicalId":402105,"journal":{"name":"Journal of Electrical Technology UMY","volume":"160 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128626286","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Prototype Automation of Air Conditioning Treatment in the Grinding Area Aneka Cocoa Based on IoT","authors":"Johan Eko Prasetyo, J. Jamaaluddin","doi":"10.18196/jet.v5i2.12736","DOIUrl":"https://doi.org/10.18196/jet.v5i2.12736","url":null,"abstract":"A good work environment will affect the level of productivity of workers in a company. The operation of the refrigeration machine in the cocoa powder grinding area is very important in production. The indicators for the operation of the cooling machine are dust density, ambient temperature and wind speed. With control on the indicator will increase efficiency. In this study, the indicator is controlled with a GP2Y1010AUF0F dust sensor, a DHT22 temperature sensor, a DS18B20 sensor, and a wind speed sensor as sensor inputs. Furthermore, the sensor will be processed by the Node M CU ESP826 module. System output will be displayed on LED and android. The results of this study indicate the accuracy of the dust sensor is 96.12%, the DHT22 temperature sensor is 99.80%, the DS18B20 temperature sensor is 99.57% and the speed sensor is 95.89%. In this prototype, we can monitor the temperature of the air velocity of dust particles in the engine and the temperature of the engine cooler together and closely monitored.","PeriodicalId":402105,"journal":{"name":"Journal of Electrical Technology UMY","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133475300","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Wireless Communication on PLC Using Access Point TP-Link TL-WN722N","authors":"Rendi Priyatna, A. Andang, F. M. S. Nursuwars","doi":"10.18196/jet.v5i1.12260","DOIUrl":"https://doi.org/10.18196/jet.v5i1.12260","url":null,"abstract":"Technological developments are a requirement for more practical system operation. One example is in data transmission. Wireless data communication is currently very popular. In today's revolution 4.0, of course, the use of cables in data transmission media is rarely used, but not every device supports wireless data communication. One of them is the PLC (Programable Logic Controller). As for additional extensions for PLCs to communicate wirelessly, they are sold separately and, of course, the price is quite expensive. Therefore, a solution for PLCs to communicate wirelessly using the TL-WN722N access point is widely available on the market. Measurements are made with the concept of point to point by looking at the results of modbus scans using Modscan32 on a PC server. The results show that the optimal maximum distance is 80 meters, with an average data transmission time of 1 second.","PeriodicalId":402105,"journal":{"name":"Journal of Electrical Technology UMY","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-08-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128473932","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}