{"title":"Design topology based comparative study on electric and photometric parameters of commercially available led lamp systems","authors":"Vishwanath Gupta, K. Ghosh, B. Roy","doi":"10.1109/I2CT.2017.8226105","DOIUrl":"https://doi.org/10.1109/I2CT.2017.8226105","url":null,"abstract":"In this work, comparative studies on electrical and photometric performance of three different, commercially available, LED lighting systems along with the verification of their compliance with relevant Indian and International Standards are presented. Linear modeling of each LED module is carried out to obtain their threshold voltage and dynamic resistance. Teardown of each LED-module and driver is carried out to study their respective topologies. Laboratory experimentation is carried out to obtain the electrical and photometric performance of the LED lighting systems with both AC and DC supply. From the obtained results it can be identified which design topology yields better electrical and photometric performance. The results are compared with relevant Indian as well as International Standards to verify the compliance of the individual LED lighting systems with the referred standards.","PeriodicalId":343232,"journal":{"name":"2017 2nd International Conference for Convergence in Technology (I2CT)","volume":"5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-04-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116861054","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A miniaturized half-mode siw based semi-circular antenna with arc-shaped slot","authors":"Soumen Banerjee, Twinkle Mohanty","doi":"10.1109/I2CT.2017.8226107","DOIUrl":"https://doi.org/10.1109/I2CT.2017.8226107","url":null,"abstract":"Asemi-circular antenna with the structure resembling that of a half-mode substrate integrated waveguide (HMSIW) is chosen and fed with co-axial feed to operate at 5.22 GHz within the IEEE 802.11a WLAN U-NII Low band. An arc-shaped slot is inserted in the middle of the parent antenna at an angle of θ = 80°, 90° and 100° in order to make the antenna compact. The miniaturized antenna so designed is found to operate at a center frequencyof 4.79 GHz for θ=80°, 4.61 GHz for θ=90° and 4.47 GHz for θ=100°. The shifts in the center frequencies observed are 430 MHz, 610 MHz and 750 MHz respectively from the center frequency of 5.22 GHz of the parent antenna. The various antenna parameters are simulated and studied extensively with the help of HFSS software.","PeriodicalId":343232,"journal":{"name":"2017 2nd International Conference for Convergence in Technology (I2CT)","volume":"72 2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-04-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130329930","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. Rahul, B. A. Vishnu, T. Pranav, Nandu C Reghu, S. Mija
{"title":"Tele-operated trajectory tracking of differential drive wheeled mobile robot using haptic robot","authors":"M. Rahul, B. A. Vishnu, T. Pranav, Nandu C Reghu, S. Mija","doi":"10.1109/I2CT.2017.8226197","DOIUrl":"https://doi.org/10.1109/I2CT.2017.8226197","url":null,"abstract":"Tele-operation is a kind of semi-autonomous system, with the objective of allowing human to control a device in remote location. This paper proposes such a system implemented with Omni Bundle haptic device and Q-Bot 2 Mobile Robot platforms connected in a master-slave configuration respectively. The paper also provides modelling, trajectory tracking controller for both robots and communication algorithm that takes place between them, in real time with experimental results.","PeriodicalId":343232,"journal":{"name":"2017 2nd International Conference for Convergence in Technology (I2CT)","volume":"43 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-04-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123971763","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Scripting engine for SCADA HMI","authors":"Mrunali Tandel, Uday Joshi, Amit Golhani","doi":"10.1109/I2CT.2017.8226178","DOIUrl":"https://doi.org/10.1109/I2CT.2017.8226178","url":null,"abstract":"Conventionally, the modules of SCADA system such as Message broker, Human Machine Interface (HMI) Building Environment, Database Manager and drivers including the SCADA HMI are developed in compiler-based languages such as C/C++. Thus, the person who develops the SCADA HMI has to be well versed with that language whose learning curve is steep. Every time the user has to rely on the SCADA engineer to develop the SCADA HMI for them. Customization of SCADA HMI is a difficult task, as all the classes and the pointers in the language has to be managed by the SCADA Engineer, thus, increasing the time to market. Scripting Engine module with combination of Qt technology is introduced in this study, which enables the SCADA Engineer to develop SCADA HMI using easy to use scripting language, balancing the time required for development as well as meeting the performance standards. As scripting languages are believed to be easily adoptable by the non-programmer, the person with the non-programming background can easily setup the SCADA screens. The comparative analysis of the Scripting Engine approach and conventional approach is also presented in this study.","PeriodicalId":343232,"journal":{"name":"2017 2nd International Conference for Convergence in Technology (I2CT)","volume":"65 2","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-04-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131717456","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Implementation of news app based on cordova cross-platform","authors":"S. Rajkumar, A. Hrishikesh, V. Vaibhav, S. Omkar","doi":"10.1109/I2CT.2017.8226094","DOIUrl":"https://doi.org/10.1109/I2CT.2017.8226094","url":null,"abstract":"Cordova is an open-source mobile application development framework. It allows you to develop mobile applications with web technologies-HTML5, CSS3 and JavaScript. Cordova cross platform target multiple platform with one code base (Code once and Run Everywhere). In this paper we implement simple News Application by using Cordova development framework, to create local Newspaper agency. This Application serves peoples of a small community with timely updates and all the events going on around them. The challenges is to prepare such solution that can be run in different platforms with single SDK without changing the performance.","PeriodicalId":343232,"journal":{"name":"2017 2nd International Conference for Convergence in Technology (I2CT)","volume":"266 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-04-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116423175","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"The cardiovascular health informatics system using LabVIEW","authors":"Rohan Jadhav, S. Patil","doi":"10.1109/I2CT.2017.8226096","DOIUrl":"https://doi.org/10.1109/I2CT.2017.8226096","url":null,"abstract":"The cardiovascular health informatics system is developed using Laboratory Virtual Instrument Engineering Workbench (LabVIEW). The system work starts with the acquisition of ECG from the patient or ECG simulator, using ECG amplifier circuit. The signal from amplifier circuit is acquired in LabVIEW environment by using DAQ cards. The advantage of LabVIEW is that it has special toolkits, pallets and modules which can be used for ECG acquisition, processing, detection of related diseases. The system will be used to CVDs detection, prediction, diagnosis and treatment. Finally, IoT technology has been implemented in this work to make the system more advanced and effective in the field of telemedicine. This will help in telediagnosis and monitoring of ECG signals.","PeriodicalId":343232,"journal":{"name":"2017 2nd International Conference for Convergence in Technology (I2CT)","volume":"48 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-04-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127636789","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Syed Razwanul Haque, Robi Kormokar, Akhlak Uz Zaman
{"title":"Drone ground control station with enhanced safety features","authors":"Syed Razwanul Haque, Robi Kormokar, Akhlak Uz Zaman","doi":"10.1109/I2CT.2017.8226318","DOIUrl":"https://doi.org/10.1109/I2CT.2017.8226318","url":null,"abstract":"'Drone Ground Control Station' is a system for controlling and monitoring Unmanned Aerial Vehicle (UAV) or Drone from any remote place. In existing nonmilitary drone ground control stations, the software can only present the telemetry data and control parameters from drone, which do not ensure the safety of an on flight drone from crashing due to bad weather and other facts. Moreover, the software and the control unit of these ground control stations are not customizable. This paper is about a drone control station which incorporates a hardware system for establishing secured communication with drone and a software for presenting the telemetry data as well as the important weather parameters and no fly zones of a region in which the drone will fly. A microcontroller is used in the hardware unit for central controlling of the ground control station. It is possible to interface any customized physical control unit like joystick with the ground control station software. The communication between drone and the ground station is established by MAVLink, a widely used communication protocol for drone. The proposed design of the system was tested by several dummy and real test flights of drone, which makes it reliable for using in any nonmilitary drone operations.","PeriodicalId":343232,"journal":{"name":"2017 2nd International Conference for Convergence in Technology (I2CT)","volume":"122 9","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-04-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133322227","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Face detection based ATM security system using embedded Linux platform","authors":"Jignesh J. Patoliya, M. Desai","doi":"10.1109/I2CT.2017.8226097","DOIUrl":"https://doi.org/10.1109/I2CT.2017.8226097","url":null,"abstract":"In order to provide reliable security solution to the people, the concept of smart ATM security system based on Embedded Linux platform is suggested in this paper. The study is focused on Design and Implementation of Face Detection based ATM Security System using Embedded Linux Platform. The system is implemented on the credit card size Raspberry Pi board with extended capability of open source Computer Vision (OpenCV) software which is used for Image processing operation. High level security mechanism is provided by the consecutive actions such as initially system captures the human face and check whether the human face is detected properly or not. If the face is not detected properly, it warns the user to adjust him/her properly to detect the face. Still the face is not detected properly the system will lock the door of the ATM cabin for security purpose. As soon as the door is lock, the system will automatic generates 3 digit OTP code. The OTP code will be sent to the watchman's registered mobile number through SMS using GSM module which is connected with the raspberry Pi. Watchman will enter the generated OTP through keypad which is interfaced with the Pi Board. The OTP will be verified and if it is correct then door will be unlock otherwise it will remain lock.","PeriodicalId":343232,"journal":{"name":"2017 2nd International Conference for Convergence in Technology (I2CT)","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-04-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115695396","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Load flow analysis for three phase unbalanced distribution feeders using Matlab","authors":"J. Vadhera","doi":"10.1109/I2CT.2017.8226252","DOIUrl":"https://doi.org/10.1109/I2CT.2017.8226252","url":null,"abstract":"This paper presents a load flow solution for three phase unbalanced radial distribution feeder using MATLAB/Simulink software. Further a comparison between Simulink load flow analysis and solution provided by IEEE distribution system analysis subcommittee for various configurations has been done. Newton-Raphson method for load flow analysis has been used. The IEEE 13 and 34 node test feeder models are used for comparison purposes because these models includes all possible practical configurations and load profiles such as three phase asymmetry, single phase lateral and distributed loads, among others. Results show the voltage magnitude and voltage angle at various load buses with minimum losses.","PeriodicalId":343232,"journal":{"name":"2017 2nd International Conference for Convergence in Technology (I2CT)","volume":"71 2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-04-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127412780","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Study on selection of an efficient routing protocol for tactical wireless communication network","authors":"Pragya Singh Tomar, Prashant Mishra, D. Das","doi":"10.1109/I2CT.2017.8226092","DOIUrl":"https://doi.org/10.1109/I2CT.2017.8226092","url":null,"abstract":"In this paper we consider the selection and deployment of MANET protocol to efficiently route the traffic and communicate in Tactical Battle Area (TBA). Tactical Wireless Communication Network (TWCN) provides connectivity between Wide Area System (WAS) of TWCN nodes, forming a backbone transmission network. TWCN is for TBA that consists of Network Centric Systems. These entities impose routing challenges on the TWCN grid with regard to frequent linking and de-linking as well as bandwidth constraints due to varying RF conditions. Hence, it becomes critical to select a proper routing protocol for TWCN. The comparison results show that the proposed combination of protocol among existing routing protocols will be best suited for TWCN.","PeriodicalId":343232,"journal":{"name":"2017 2nd International Conference for Convergence in Technology (I2CT)","volume":"126 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-04-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129943852","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}