发布求助
文献互助 智能选刊 最新文献

2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon)最新文献

筛选
英文 中文
Nanodiamond Suspensions Application for Heat Transfer Processes Intensification 纳米金刚石悬浮液在强化传热过程中的应用
2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon) Pub Date : 2018-10-01 DOI: 10.1109/FAREASTCON.2018.8602772
A. Lobasov, A. Minakov, M. Pryazhnikov
{"title":"Nanodiamond Suspensions Application for Heat Transfer Processes Intensification","authors":"A. Lobasov, A. Minakov, M. Pryazhnikov","doi":"10.1109/FAREASTCON.2018.8602772","DOIUrl":"https://doi.org/10.1109/FAREASTCON.2018.8602772","url":null,"abstract":"Intensification of heat transfer processes is an important and relevant task, and one way to solve it is the use of liquids with various nanoparticles, called “nanofluids.” Therefore, an experimental study of the convective heat transfer of nanodiamonds suspensions in a circular straight pipe was carried out in this paper. Ethylene glycol was used as the base liquid. The concentration of nanoparticles ranged from 0.25 vol.% to 2 vol.%. The Reynolds numbers varied from 5 to 100. The values of the viscosity and the thermal conductivity coefficients of the resulting nanofluids were also measured experimentally. It was found as a result of these measurements, that the dependence of the thermal conductivity on the concentration of nanoparticles is described by the Maxwell equation. The dependence of the nanofluids viscosity coefficient on the nanoparticles concentration was significantly differ from the Einstein equation, it was much higher. It was found as a result of experimental studies of convective heat transfer, that as the concentration of nanoparticles increases, the heat transfer coefficient also increases, and for a maximum concentration, it was 15% higher then for the base fluid.","PeriodicalId":177690,"journal":{"name":"2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127003981","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Efficiency of an Algorithm of Scheduling 一种调度算法的效率
2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon) Pub Date : 2018-10-01 DOI: 10.1109/FAREASTCON.2018.8602568
E.M. Kuznetsov, V.P. Klimanov
{"title":"Efficiency of an Algorithm of Scheduling","authors":"E.M. Kuznetsov, V.P. Klimanov","doi":"10.1109/FAREASTCON.2018.8602568","DOIUrl":"https://doi.org/10.1109/FAREASTCON.2018.8602568","url":null,"abstract":"The article examines the effectiveness of the scheduling algorithm for solving the problem of increasing the efficiency of the operation of corporate information and computer networks based on the use of priority information processing models. The possibility of increasing the efficiency is caused by the analysis of the features of properties and characteristics of the considered network in various modes of operation, which are obtained at the modeling stage. The order of servicing of information flows of different types, determined by the introduction of priorities, allows to reduce the average waiting time for system operation and loss due to waiting. The task of analyzing of the efficiency of priority systems for the transmission and processing of information in complex information and computing systems is the perspective application-oriented task due to use of an effective dispatch algorithm.","PeriodicalId":177690,"journal":{"name":"2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114548518","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Registrar the Parameters of Power Supply Quality 注册电源质量参数
2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon) Pub Date : 2018-10-01 DOI: 10.1109/FAREASTCON.2018.8602502
A. Onischenko, A. N. Merschikov
{"title":"Registrar the Parameters of Power Supply Quality","authors":"A. Onischenko, A. N. Merschikov","doi":"10.1109/FAREASTCON.2018.8602502","DOIUrl":"https://doi.org/10.1109/FAREASTCON.2018.8602502","url":null,"abstract":"In last decades on of Russia Railways are phased implementation and upgrade systems of technical diagnostics and monitoring railway automation and telemechanics. The implementation systems of technical diagnostics and monitoring allows to move from the regulatory type of maintenance, which takes a significant time of operating personnel to factual, which will reduce operating costs. Due to fact that maintenance by condition is reduce to a minimum interference in operation of railway automation and remote control, it is possible to reduce number so-called post-prevention failures. For ensuring continuity and safety transportation process system of power supply devices railway automatic equipment and telemechanics solve important and responsible problems from which it is possible to distinguish providing uninterrupted, that is continuous in time, power supply systems of railway automatic equipment and telemechanics and devices with quality of electric power, necessary for their reliable work. As constructive, circuit and technological capabilities of increase in reliability of systems are limited, a natural way of elimination of this shortcoming is development methods and control devices working capacity and search malfunctions of equipment. Thanks to the microprocessor systems introduced on Russian Railways opportunities for solution problems of diagnosing have extended. In article is considered device, principle of action and functionality of developed station six-phase registrar of parameters of quality of power supply.","PeriodicalId":177690,"journal":{"name":"2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon)","volume":"6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121558106","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Transient Stability Problems of Electic Power Syetems with Distributed Generation 分布式发电电力系统的暂态稳定问题
2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon) Pub Date : 2018-10-01 DOI: 10.1109/FAREASTCON.2018.8602504
Voropai Nikolai Ivanovich, Chulyukova Margarita Valeryevna
{"title":"Transient Stability Problems of Electic Power Syetems with Distributed Generation","authors":"Voropai Nikolai Ivanovich, Chulyukova Margarita Valeryevna","doi":"10.1109/FAREASTCON.2018.8602504","DOIUrl":"https://doi.org/10.1109/FAREASTCON.2018.8602504","url":null,"abstract":"Reduction of negative consequences of large scale system emergencies with cascading development together with massive loss of supply of consumers and fast system restoration are possible by using distributed generation. Actual problem in this case is to keep the transient stability of distributed generation units because of rather small inertia parameters of such small installations, especially gas turbine units, by the emergencies. The importance of this problem is higher for operation control of smart grid.","PeriodicalId":177690,"journal":{"name":"2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon)","volume":"10 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125985115","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
Fuzzy Multi-Cascade AC Drive Control System 模糊多级联交流驱动控制系统
2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon) Pub Date : 2018-10-01 DOI: 10.1109/FAREASTCON.2018.8602930
S. Cherniy, A. S. Gudim, A. Buzikayeva
{"title":"Fuzzy Multi-Cascade AC Drive Control System","authors":"S. Cherniy, A. S. Gudim, A. Buzikayeva","doi":"10.1109/FAREASTCON.2018.8602930","DOIUrl":"https://doi.org/10.1109/FAREASTCON.2018.8602930","url":null,"abstract":"The paper represents the model of AC drive control system. An analysis of conventional drive control system has been performed, its advantages and disadvantages, and preconditions for use of intelligent approaches for implementation of control systems for this kind of objects have been estimated. The intelligent system is supposed to be modeled with use of fuzzy logic controller and different inference algorithms for implementation of control laws in various control loops. Dynamic characteristics of the system both for conventional case and with use of controllers based on fuzzy set theory have been analyzed. The practicability of using the multi-cascade fuzzy systems while implementation of unified intelligent control module and different combinations of fuzzy inference algorithms has been demonstrated for complex drive systems. Application of this technology allows implementation of control system for the entire class of drive systems considering all special aspects and relationships between the coordinates in the complex control object. Additionally, modeling of spacial membership function using multi-cascade fuzzy controller will give a possibility to avoid a variety of quantitative and qualitative restrictions due to complex relations between the coordinate in such systems.","PeriodicalId":177690,"journal":{"name":"2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon)","volume":"82 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126935301","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 3
Application of an Intelligent System for the Monitoring of Energy Efficiency Indicators at Service Locomotive Depots 机车车辆段能效指标智能监测系统的应用
2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon) Pub Date : 2018-10-01 DOI: 10.1109/FAREASTCON.2018.8602926
A. Komyakov, A. Ponomarev, V. V. Erbes
{"title":"Application of an Intelligent System for the Monitoring of Energy Efficiency Indicators at Service Locomotive Depots","authors":"A. Komyakov, A. Ponomarev, V. V. Erbes","doi":"10.1109/FAREASTCON.2018.8602926","DOIUrl":"https://doi.org/10.1109/FAREASTCON.2018.8602926","url":null,"abstract":"The main problems of production processes energy efficiency control are listed. Schematic diagram and description of the intellectual system for the monitoring of energy efficiency indicators are presented. Algorithms of data origination for the simulation and evaluation of production process efficiency have been developed. Mathematical model of energy consumption process for compressor facility equipment is developed. Results of energy efficiency indicators monitoring system approval are presented.","PeriodicalId":177690,"journal":{"name":"2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon)","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129144802","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 3
Automated Collection and Processing Data in the System of Monitoring Environmental Pollution by Industrial Enterprises 工业企业环境污染监测系统中数据的自动采集与处理
2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon) Pub Date : 2018-10-01 DOI: 10.1109/FAREASTCON.2018.8602550
A. Belov, Y. Kropotov
{"title":"Automated Collection and Processing Data in the System of Monitoring Environmental Pollution by Industrial Enterprises","authors":"A. Belov, Y. Kropotov","doi":"10.1109/FAREASTCON.2018.8602550","DOIUrl":"https://doi.org/10.1109/FAREASTCON.2018.8602550","url":null,"abstract":"The questions of application wavelet-transformation for the analysis and processing of time series concentrations of pollutants is represented. Scientific novelty of the work is to develop a mathematical model of time series, constructed on the basis of the wavelet transform. On the basis of the model developed algorithms for analysis, processing and presentation of experimental time-series concentrations of pollutants. Process of transformation time numbers on the basis of work with factors of wavelet-decomposition and multiscale representation of analyzed time numbers is in detail described. The developed algorithms are integrated into the automated monitoring system by industrial emissions.","PeriodicalId":177690,"journal":{"name":"2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon)","volume":"42 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132988533","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
New Technology for Measuring Geometric Parameters of Large-Sized Rotary Parts 大型回转零件几何参数测量新技术
2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon) Pub Date : 2018-10-01 DOI: 10.1109/FAREASTCON.2018.8602506
H. Radev, V. Bogev, V. Vassilev
{"title":"New Technology for Measuring Geometric Parameters of Large-Sized Rotary Parts","authors":"H. Radev, V. Bogev, V. Vassilev","doi":"10.1109/FAREASTCON.2018.8602506","DOIUrl":"https://doi.org/10.1109/FAREASTCON.2018.8602506","url":null,"abstract":"The technology of measurement and control of geometric parameters of large-sized parts in heavy and transport engineering, in power engineering, etc. is considered in this paper. It is based on the results of measuring the radial and axial run-out of the surfaces of the part and the subsequent processing of this primary measurement information, without requiring the accuracy of the output base. This can be comprehended by bringing the results of radial and axial run-out measurement to the virtual output datum - to the virtual datum axis, which is a straight line passing through the centroids of points of instantaneous rotation axes in sections of two rings mounted on the end face surfaces of the part approximately coaxial to its geometric axis.","PeriodicalId":177690,"journal":{"name":"2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon)","volume":"92 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133049734","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 3
Dependability Assessment of Western Siberia Electrical Grids 西西伯利亚电网可靠性评估
2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon) Pub Date : 2018-10-01 DOI: 10.1109/FAREASTCON.2018.8602508
T. Gladkikh
{"title":"Dependability Assessment of Western Siberia Electrical Grids","authors":"T. Gladkikh","doi":"10.1109/FAREASTCON.2018.8602508","DOIUrl":"https://doi.org/10.1109/FAREASTCON.2018.8602508","url":null,"abstract":"The dependability estimating method of the extreme North areas electrical grid proposed in the work. We have developed mathematical models of reliability of power supply systems for various type consumers. These models take into account the sensitivity of consumers to specific disturbances, specific of networks exploitation and possibility of redundancy. The technique results are to determine the ways of the operational dependability improving. We suggested the directions of electrical networks dependability increase by using superfluity of consumers' reliability redundancy and the installation of protection devices for voltage dips.","PeriodicalId":177690,"journal":{"name":"2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon)","volume":"17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130169172","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Increasing NPP Maneuverability on the Basis of Heat Accumulation System and Additional Multifunctional Steam Turbine 在蓄热系统和附加多功能汽轮机的基础上提高核电站的可操作性
2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon) Pub Date : 2018-10-01 DOI: 10.1109/FAREASTCON.2018.8602957
R. Aminov, V. Yurin, M. Murtazov
{"title":"Increasing NPP Maneuverability on the Basis of Heat Accumulation System and Additional Multifunctional Steam Turbine","authors":"R. Aminov, V. Yurin, M. Murtazov","doi":"10.1109/FAREASTCON.2018.8602957","DOIUrl":"https://doi.org/10.1109/FAREASTCON.2018.8602957","url":null,"abstract":"The work investigates the increase of maneuverability of two-circuit NPP power unit with a VVER reactor using a multifunctional heat accumulation system and additional steam turbine. In a normal operation mode, the system generates electricity, whereas in emergency situations, the station blackouts, it allows to provide power supply necessary for cooling the nuclear reactor core. The main technological characteristic of the power complex, including a two-circuit nuclear power plant, a heat phase transition accumulator and an additional low-power multifunctional steam turbine were investigated. Substantiation of the choice of the heat-accumulation material and the operating mode of the system were provided, including the economic analysis of the energy complex under study.","PeriodicalId":177690,"journal":{"name":"2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon)","volume":"91 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122443234","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
首页 上一页 下一页 尾页
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整，为了账户安全，请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们：info@booksci.cn Book学术提供免费学术资源搜索服务，方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号：604180095
Book学术官方微信