SP-192: 2000 Canmet/ACI Conference on Durability of Concrete最新文献

筛选
英文 中文
Durability of Plastic Fiber-Reinforced Multilayer Shotcrete Panels 塑料纤维增强多层喷射混凝土板的耐久性
SP-192: 2000 Canmet/ACI Conference on Durability of Concrete Pub Date : 2000-04-01 DOI: 10.14359/5798
R. Montagna, M. Pauri, U. Scartozzi
{"title":"Durability of Plastic Fiber-Reinforced Multilayer Shotcrete Panels","authors":"R. Montagna, M. Pauri, U. Scartozzi","doi":"10.14359/5798","DOIUrl":"https://doi.org/10.14359/5798","url":null,"abstract":"This work examined the durability of multilayer sandwich panels cast in-situ with shotcrete technology. The behavior of different shotcrete mixtures toward actions caused by climatic variation changes is analyzed. A standard shotcrete mixture, normally used by panel producers, and 3 modified and optimized shotcretes (with silica fume, expansive agent, and plastic fibers) were compared. Two accelerated tests were conducted: an accelerated cracking test for short-term degradation and an accelerated aging test for long-term degradation. Test procedures and the climatic chamber used in the aging test are illustrated. Results are presented of an investigation into the superficial cracking density panel specimens. The data obtained at the end of the accelerated tests was compared. Findings point to a cracking density of optimized and modified shotcretes lower than that of standard shotcrete.","PeriodicalId":137341,"journal":{"name":"SP-192: 2000 Canmet/ACI Conference on Durability of Concrete","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2000-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128447225","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Statistical Comparison of Properties of Manufactured Sand-to-Mortar Durability and Scaling Resistance 成品砂砂浆耐久性和抗结垢性能的统计比较
SP-192: 2000 Canmet/ACI Conference on Durability of Concrete Pub Date : 2000-04-01 DOI: 10.14359/5779
P. Hudec, G. Agistalis
{"title":"Statistical Comparison of Properties of Manufactured Sand-to-Mortar Durability and Scaling Resistance","authors":"P. Hudec, G. Agistalis","doi":"10.14359/5779","DOIUrl":"https://doi.org/10.14359/5779","url":null,"abstract":"In this work, results of tests on rock aggregate and manufactured sand from Paleozoic carbonate rocks from quarries in southwest Ontario were compared to those of mortars containing manufactured sand. Aggregate tests included petrographic analysis, water absorption/adsorption, linear expansion under various conditions, thermal expansion, insoluble residue content, micro-Deval abrasion loss, freeze-thaw loss, and rate of settlement of -0.075 mm fraction. Mortar tests consisted of drying shrinkage, water absorption/adsorption, linear expansion under various conditions, thermal expansion, and freeze-thaw loss. Multivariate statistical techniques were used to compare and group the properties of aggregates and mortars. Factor analysis showed that the results could be grouped into 4 factors: 1) durability; 2) porosity; 3) thermal expansion; and 4) isothermal expansion factors. Stepwise regression predictive models of mortar resistance to salt scaling were developed, based on results of simpler tests on aggregates. K-cluster analysis successfully classified the aggregates and mortars made from them into good and poor categories. The tree analysis provides the passing limits that can be applied to aggregate tests of any defined group of aggregates.","PeriodicalId":137341,"journal":{"name":"SP-192: 2000 Canmet/ACI Conference on Durability of Concrete","volume":"123 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2000-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131151362","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Durability of Fiber-Reinforced Composites 纤维增强复合材料的耐久性
SP-192: 2000 Canmet/ACI Conference on Durability of Concrete Pub Date : 2000-04-01 DOI: 10.14359/5788
S. Rols, J. Ambroise, J. Pera
{"title":"Durability of Fiber-Reinforced Composites","authors":"S. Rols, J. Ambroise, J. Pera","doi":"10.14359/5788","DOIUrl":"https://doi.org/10.14359/5788","url":null,"abstract":"Glass fiber-reinforced composites, when subjected to wetting/drying cycles, can become brittle. This is mainly due to the precipitation of calcium hydroxide crystals at the surface of the fiber, which block the fibers and reduce their deformation. The addition of a polymer to the cementitious matrix will not prevent such phenomena. Durable composites have been developed using polypropylene fibers and modifying the cementitious matrix by a polymeric addition. The volumic fraction of fibers was 1.6% and the matrix contained either an acrylic polymer or a vinyl acetate-ethylene copolymer. Ductile composites were obtained for conditions of storage that included: 20 deg C in sealed plastic bags, immersion in water at 60 deg C, and wetting/drying cycles.","PeriodicalId":137341,"journal":{"name":"SP-192: 2000 Canmet/ACI Conference on Durability of Concrete","volume":"139 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2000-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123525822","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
Hiperpave/Guidance to Avoid Early-Age Cracking in Concrete Pavements 避免混凝土路面早期开裂的指引
SP-192: 2000 Canmet/ACI Conference on Durability of Concrete Pub Date : 2000-04-01 DOI: 10.14359/5804
S. Forster
{"title":"Hiperpave/Guidance to Avoid Early-Age Cracking in Concrete Pavements","authors":"S. Forster","doi":"10.14359/5804","DOIUrl":"https://doi.org/10.14359/5804","url":null,"abstract":"This paper provides an overview of the development of HIPERPAV, a user-friendly computer program that utilizes job-specific input in the areas of material selection and mix propotioning, pavement design, environmental conditions, and construction procedures. The HIPERPAV program allows engineers to consider a number of scenarios during the mix design and pavement design processes, so that the pavement ultimately placed will have the best chance of surviving the first 3 critical days in a crack-free condition.","PeriodicalId":137341,"journal":{"name":"SP-192: 2000 Canmet/ACI Conference on Durability of Concrete","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2000-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115401472","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
"Effects of High Temperature on Residual, Mechanical, and Transport Properties of Concrete" 高温对混凝土残余、力学和运输性能的影响
SP-192: 2000 Canmet/ACI Conference on Durability of Concrete Pub Date : 2000-04-01 DOI: 10.14359/5797
B. Barragán, A. D. Maio, G. Giaccio, L. Traversa, R. Zerbino
{"title":"\"Effects of High Temperature on Residual, Mechanical, and Transport Properties of Concrete\"","authors":"B. Barragán, A. D. Maio, G. Giaccio, L. Traversa, R. Zerbino","doi":"10.14359/5797","DOIUrl":"https://doi.org/10.14359/5797","url":null,"abstract":"This paper presents an extensive analysis of the physical and mechanical properties of normal and high-strength concretes exposed to temperatures up to 700 deg C. Ultrasonic pulse velocity, static and dynamic modulus of elasticity, and strength and deformations under compressive loading were measured. In addition, flexural and splitting tensile strength and the fracture energy were also determined. Other tests for finding the water permeability, water penetration, and absorption were performed on concrete slices in order to analyze the differences in the physical properties of the cover and bulk concrete.","PeriodicalId":137341,"journal":{"name":"SP-192: 2000 Canmet/ACI Conference on Durability of Concrete","volume":"867 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2000-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114150497","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 9
Experimental and Analytical Studies on Oxygen Transport in Various Cementitious Materials 氧在不同胶凝材料中的输运实验与分析研究
SP-192: 2000 Canmet/ACI Conference on Durability of Concrete Pub Date : 2000-04-01 DOI: 10.14359/5781
A. Sudjono, H. Seki
{"title":"Experimental and Analytical Studies on Oxygen Transport in Various Cementitious Materials","authors":"A. Sudjono, H. Seki","doi":"10.14359/5781","DOIUrl":"https://doi.org/10.14359/5781","url":null,"abstract":"This work studied 1 cement paste mixture, 4 mortar mixtures with different fine aggregate-cement ratio, 4 concrete mixtures with different water-to-cement ratio, 3 concrete mixtures with different maximum size of coarse aggregate, 4 concrete mixtures incorporating 50% blast furnace slag, and 3 concrete mixtures utilizing 25% fly ash with different air content. All specimens were mainly used for determination of the coefficient of oxygen diffusion. The characteristics of gas transport through various cementitious materials are investigated by determining the coefficient of oxygen diffusion. The pore size distribution and compressive strength experiment are also measured to explain in more detail the gas transport process through the concrete. Test results indicate the coefficient of oxygen diffusion decreases by reducing the W/C, by using mineral admixtures and large maximum size of coarse aggregate, by increasing the weight of aggregate, and aqueous phase in the concrete. The calculated coefficient of oxygen diffusion values on the theory of gas transport through straight capillaries tends to overestimate the experimental results by a factor of 4. However, the analytical result has the same tendency with the experimental result.","PeriodicalId":137341,"journal":{"name":"SP-192: 2000 Canmet/ACI Conference on Durability of Concrete","volume":"100 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2000-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128876458","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
Comparative Evaluation of Traditional and Innovative Corrosion Protection Methods in Cracked Reinforced Concrete Exposed to Chloride Environment 氯离子环境下裂缝钢筋混凝土传统与创新防腐方法的比较评价
SP-192: 2000 Canmet/ACI Conference on Durability of Concrete Pub Date : 2000-04-01 DOI: 10.14359/5774
F. Tittarelli, G. Moriconi, G. Gasparri, R. Fratesi
{"title":"Comparative Evaluation of Traditional and Innovative Corrosion Protection Methods in Cracked Reinforced Concrete Exposed to Chloride Environment","authors":"F. Tittarelli, G. Moriconi, G. Gasparri, R. Fratesi","doi":"10.14359/5774","DOIUrl":"https://doi.org/10.14359/5774","url":null,"abstract":"The corrosion resistance of cracked concrete specimens reinforced with bare, stainless, or galvanized steel plates are compared with the corrosion behavior of bare steel reinforcement embedded in concrete specimens coated with a flexible polymer-cement based mortar both before and after specimen cracking. The results in terms of corrosion electrochemical potential and short-circuit electric current measured on the different steel reinforcements are also compared with those related to galvanized reinforcement embedded in hydrophobic concrete specimens. Reinforced concrete specimens were manufactured for each protection method considered and cured before exposure to the test environments. Some specimens were previously cracked by applying flexural stress. The specimens were exposed to increasingly aggressive environments: forty days of full immersion in a 3.5% NaCl solution, simulating a marine environment, were followed by five months of wet-dry cycles using a 10% NaCl solution, simulating a bridge deck treated with deicing salts. The results for the full immersion condition show that negligible corrosion rates were detected in all the cracked specimens, except those treated with the flexible polymer-cement mortar before specimen cracking and the hydrophobic concrete specimens. On the other hand, for the cracked specimens exposed to wet-dry cycles, high corrosion rates were measured for both bare and galvanized steel reinforcement. This was in contrast to the constantly good behavior of stainless steel reinforcement and also of the galvanized steel reinforcement embedded in the hydrophobic concrete.","PeriodicalId":137341,"journal":{"name":"SP-192: 2000 Canmet/ACI Conference on Durability of Concrete","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2000-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117095713","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
Influence of Moisture Curing on Durability of Fly Ash Concrete for Road Pavements 水分养护对道路路面粉煤灰混凝土耐久性的影响
SP-192: 2000 Canmet/ACI Conference on Durability of Concrete Pub Date : 2000-04-01 DOI: 10.14359/5743
M. S. Vieira, I. R. Almeida, A. Concalves
{"title":"Influence of Moisture Curing on Durability of Fly Ash Concrete for Road Pavements","authors":"M. S. Vieira, I. R. Almeida, A. Concalves","doi":"10.14359/5743","DOIUrl":"https://doi.org/10.14359/5743","url":null,"abstract":"In Portugal, fly ash is sometimes used as a cement replacement material in concrete for road pavements. The percentages of replacement generally range from about 30% in the top pavement layer up to 50% in the bottom layer. A study was carried out to evaluate to what extent the water curing practice could affect some of the properties of concrete with different amounts of cement replaced by fly ash. For this purpose, several properties generally related to the durability of concrete pavements were determined. Abrasion tests, as well as determinations of compressive strength, capillary absorption, oxygen permeability and open porosity, were performed on concrete mixtures with different cement and fly ash contents, using limestone coarse aggregate and natural siliceous sand. This paper presents results on the influence of different water curing times on these properties. The results show that fly ash concretes can develop satisfactory resistance to abrasion, even with large amounts of cement replacement. Concretes with lower permeability and higher strength generally tended to exhibit better abrasion resistance. In general, concrete performance was improved with longer water curing times.","PeriodicalId":137341,"journal":{"name":"SP-192: 2000 Canmet/ACI Conference on Durability of Concrete","volume":"59 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2000-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117199610","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 3
Developments in Near-Surface Testing of Covercrete 覆盖层近地表试验研究进展
SP-192: 2000 Canmet/ACI Conference on Durability of Concrete Pub Date : 2000-04-01 DOI: 10.14359/5755
W. McCarter, T. Chrisp, G. Starrs, P. Basheer
{"title":"Developments in Near-Surface Testing of Covercrete","authors":"W. McCarter, T. Chrisp, G. Starrs, P. Basheer","doi":"10.14359/5755","DOIUrl":"https://doi.org/10.14359/5755","url":null,"abstract":"The work presented details a testing methodology whereby a range of properties of cover-zone concrete can be determined, these properties being ultimately linked to the long-term performance of concrete. Emphasis is place on the application of a surface-applied, water absorption method in conjunction with electrical measurements taken within the cover zone. In the current work, the influence of cyclic wetting and drying of normal portland cement concretes, with and without blast-furnace slag replacement, were studied. Samples were subjected to both water and chloride solution. The study shows that the depth and rate of water penetration during absorption can be evaluated; when these data are combined with volumetric gain, the effective porosity of concrete in the cover region can be estimated. Conductivity profiles taken over cycles of wetting and drying can be used to provide information on the zone of influence of drying action (convective zone), on-going hydration effects, and ionic ingress.","PeriodicalId":137341,"journal":{"name":"SP-192: 2000 Canmet/ACI Conference on Durability of Concrete","volume":"166 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2000-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134207633","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Performance Criteria for Selection of Repair Materials 修理材料选择的性能标准
SP-192: 2000 Canmet/ACI Conference on Durability of Concrete Pub Date : 2000-04-01 DOI: 10.14359/5794
A. Vaysburd, J. E. McDonald, P. Emmons, R. Poston
{"title":"Performance Criteria for Selection of Repair Materials","authors":"A. Vaysburd, J. E. McDonald, P. Emmons, R. Poston","doi":"10.14359/5794","DOIUrl":"https://doi.org/10.14359/5794","url":null,"abstract":"This paper describes a research project entitled \"Performance Criteria for Cement-based Repair Mateials,\" initiated by the U.S. Army Corps of Engineers and performed by Structural Preservation Systems. In Phase I of the study, preliminary performance criteria for dimensionally compatible repair materials were identified based on a literature review. Lab and field exposure tests to evaluate the preliminary performance criteria were conducted in Phase II. Results of these tests were correlated to provide a basis for development of performance criteria for the selection of dimensionally compatible cement-based repair materials.","PeriodicalId":137341,"journal":{"name":"SP-192: 2000 Canmet/ACI Conference on Durability of Concrete","volume":"147 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2000-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134482120","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 6
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书