Jonathan H Galarraga, Hannah M Zlotnick, Ryan C Locke, Sachin Gupta, Natalie L Fogarty, Kendall M Masada, Brendan D Stoeckl, Lorielle Laforest, Miguel Castilho, Jos Malda, Riccardo Levato, James L Carey, Robert L Mauck, Jason A Burdick
{"title":"Evaluation of surgical fixation methods for the implantation of melt electrowriting-reinforced hyaluronic acid hydrogel composites in porcine cartilage defects.","authors":"Jonathan H Galarraga, Hannah M Zlotnick, Ryan C Locke, Sachin Gupta, Natalie L Fogarty, Kendall M Masada, Brendan D Stoeckl, Lorielle Laforest, Miguel Castilho, Jos Malda, Riccardo Levato, James L Carey, Robert L Mauck, Jason A Burdick","doi":"10.18063/ijb.775","DOIUrl":"10.18063/ijb.775","url":null,"abstract":"<p><p>The surgical repair of articular cartilage remains an ongoing challenge in orthopedics. Tissue engineering is a promising approach to treat cartilage defects; however, scaffolds must (i) possess the requisite material properties to support neocartilage formation, (ii) exhibit sufficient mechanical integrity for handling during implantation, and (iii) be reliably fixed within cartilage defects during surgery. In this study, we demonstrate the reinforcement of soft norbornene-modified hyaluronic acid (NorHA) hydrogels via the melt electrowriting (MEW) of polycaprolactone to fabricate composite scaffolds that support encapsulated porcine mesenchymal stromal cell (pMSC, three donors) chondrogenesis and cartilage formation and exhibit mechanical properties suitable for handling during implantation. Thereafter, acellular MEW-NorHA composites or MEW-NorHA composites with encapsulated pMSCs and precultured for 28 days were implanted in full-thickness cartilage defects in porcine knees using either bioresorbable pins or fibrin glue to assess surgical fixation methods. Fixation of composites with either biodegradable pins or fibrin glue ensured implant retention in most cases (80%); however, defects treated with pinned composites exhibited more subchondral bone remodeling and inferior cartilage repair, as evidenced by micro-computed tomography (micro-CT) and safranin O/fast green staining, respectively, when compared to defects treated with glued composites. Interestingly, no differences in repair tissue were observed between acellular and cellularized implants. Additional work is required to assess the full potential of these scaffolds for cartilage repair. However, these results suggest that future approaches for cartilage repair with MEW-reinforced hydrogels should be carefully evaluated with regard to their fixation approach for construct retention and surrounding cartilage tissue damage.</p>","PeriodicalId":48522,"journal":{"name":"International Journal of Bioprinting","volume":"9 5","pages":"775"},"PeriodicalIF":8.4,"publicationDate":"2023-06-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://ftp.ncbi.nlm.nih.gov/pub/pmc/oa_pdf/60/45/IJB-9-5-775.PMC10339416.pdf","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"9817196","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Mingshan Zhang, Fang Yang, Daobo Han, Shi-Yao Zhang, Yipeng Dong, Xinyu Li, Liyun Ling, Zhichao Deng, Xuewei Cao, Jianguo Tian, Qing Ye, Yan Wang
{"title":"3D bioprinting of corneal decellularized extracellular matrix: GelMA composite hydrogel for corneal stroma engineering.","authors":"Mingshan Zhang, Fang Yang, Daobo Han, Shi-Yao Zhang, Yipeng Dong, Xinyu Li, Liyun Ling, Zhichao Deng, Xuewei Cao, Jianguo Tian, Qing Ye, Yan Wang","doi":"10.18063/ijb.774","DOIUrl":"10.18063/ijb.774","url":null,"abstract":"<p><p>Millions of individuals across the world suffer from corneal stromal diseases that impair vision. Fortunately, three-dimensional (3D) bioprinting technology which has revolutionized the field of regenerative tissue engineering makes it feasible to create personalized corneas. In this study, an artificial cornea with a high degree of precision, smoothness, and programmable curvature was prepared by using digital light processing (DLP) 3D bioprinting in one piece with no support structure, and the construct was then confirmed by optical coherence tomography (OCT). On the basis of this approach, we developed a novel corneal decellularized extracellular matrix/gelatin methacryloyl (CECM-GelMA) bioink that can produce complex microenvironments with highly tunable mechanical properties while retaining high optical transmittance. Furthermore, the composite hydrogel was loaded with human corneal fibroblasts (hCFs), and <i>in vitro</i> experiments showed that the hydrogel maintained high cell viability and expressed core proteins. <i>In vivo</i> tests revealed that the hydrogel might promote epithelial regeneration, keep the matrix aligned, and restore clarity. This demonstrates how crucial a role CECM plays in establishing a favorable environment that encourages the transformation of cell function. Therefore, artificial corneas that can be rapidly customized have a huge potential in the development of <i>in vitro</i> corneal matrix analogs.</p>","PeriodicalId":48522,"journal":{"name":"International Journal of Bioprinting","volume":"9 5","pages":"774"},"PeriodicalIF":5.0,"publicationDate":"2023-06-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://ftp.ncbi.nlm.nih.gov/pub/pmc/oa_pdf/e9/77/IJB-9-5-774.PMC10406171.pdf","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"9968646","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Blood-derived biomaterials for tissue graft biofabrication by solvent-based extrusion bioprinting","authors":"C. D. Amo, I. Andia","doi":"10.18063/ijb.762","DOIUrl":"https://doi.org/10.18063/ijb.762","url":null,"abstract":"This article provides an overview of the different types of blood-derived biomaterials that can be used as solvent additives in the formulation of inks/bioinks for use in solvent extrusion printing/bioprinting. We discuss the properties of various blood sub-products obtained after blood fractionation in terms of their use in tailoring ink/bioink to produce functional constructs designed to improve tissue repair. Blood-derived additives include platelets and/or their secretome, including signaling proteins and microvesicles, which can drive cell migration, inflammation, angiogenesis, and synthesis of extracellular matrix proteins. The contribution of plasma to ink/bioink functionalization relies not only on growth factors, such as hepatocyte growth factor and insulin growth factors, but also on adhesive proteins, such as fibrinogen/fibrin, vitronectin, and fibronectin. We review the current developments and progress in solvent-based extrusion printing/bioprinting with inks/bioinks functionalized with different blood-derived products, leading toward the development of more advanced patient-specific 3D constructs in multiple medical fields, including but not limited to oral tissues and cartilage, bone, skin, liver, and neural tissues. This information will assist researchers in identifying the most suitable blood-derived product for their ink/bioink formulation based on the intended regenerative functionality of the target tissue.","PeriodicalId":48522,"journal":{"name":"International Journal of Bioprinting","volume":"22 1","pages":""},"PeriodicalIF":8.4,"publicationDate":"2023-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80384637","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A state-of-the-art guide about the effects of sterilization processes on 3D-printed materials for surgical planning and medical applications: A comparative study.","authors":"Arnau Valls-Esteve, Pamela Lustig-Gainza, Nuria Adell-Gomez, Aitor Tejo-Otero, Marti Englí-Rueda, Estibaliz Julian-Alvarez, Osmeli Navarro-Sureda, Felip Fenollosa-Artés, Josep Rubio-Palau, Lucas Krauel, Josep Munuera","doi":"10.18063/ijb.756","DOIUrl":"10.18063/ijb.756","url":null,"abstract":"<p><p>Surgeons use different medical devices in the surgery, such as patient-specific anatomical models, cutting and positioning guides, or implants. These devices must be sterilized before being used in the operation room. There are many sterilization processes available, with autoclave, hydrogen peroxide, and ethylene oxide being the most common in hospital settings. Each method has both advantages and disadvantages in terms of mechanics, chemical interaction, and post-treatment accuracy. The aim of the present study is to evaluate the dimensional and mechanical effect of the most commonly used sterilization techniques available in clinical settings, i.e., Autoclave 121, Autoclave 134, and hydrogen peroxide (HPO), on 11 of the most used 3D-printed materials fabricated using additive manufacturing technologies. The results showed that the temperature (depending on the sterilization method) and the exposure time to that temperature influence not only the mechanical behavior but also the original dimensioning planned on the 3D model. Therefore, HPO is a better overall option for most of the materials evaluated. Finally, based on the results of the study, a recommendation guide on sterilization methods per material, technology, and clinical application is presented.</p>","PeriodicalId":48522,"journal":{"name":"International Journal of Bioprinting","volume":"9 5","pages":"756"},"PeriodicalIF":6.8,"publicationDate":"2023-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://ftp.ncbi.nlm.nih.gov/pub/pmc/oa_pdf/b7/0e/IJB-9-5-756.PMC10406103.pdf","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"9957246","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Xue Yang, Shuai Li, Xin Sun, Ya Ren, Lei Qiang, Yihao Liu, Jinwu Wang, Kerong Dai
{"title":"Swelling compensation of engineered vasculature fabricated by additive manufacturing and sacrifice-based technique using thermoresponsive hydrogel.","authors":"Xue Yang, Shuai Li, Xin Sun, Ya Ren, Lei Qiang, Yihao Liu, Jinwu Wang, Kerong Dai","doi":"10.18063/ijb.749","DOIUrl":"10.18063/ijb.749","url":null,"abstract":"<p><p>Engineered vasculature is widely employed to maintain the cell viability within <i>in vitro</i> tissues. A variety of fabrication techniques for engineered vasculature have been explored, with combination of additive manufacturing with a sacrifice-based technique being the most common approach. However, the size deformation of vasculature caused by the swelling of sacrificial materials remains unaddressed. In this study, Pluronic F-127 (PF-127), the most widely used sacrificial material, was employed to study the deformation of the vasculature. Then, a thermoresponsive hydrogel comprising poly(N-isopropylacrylamide) (PNIPAM) and gelatin methacrylate (GelMA) was used to induce volume shrinkage at 37°C to compensate for the deformation of vasculature caused by the swelling of a three-dimensional (3D)-printed sacrificial template, and to generate vasculature of a smaller size than that after deformation. Our results showed that the vasculature diameter increased after the sacrificial template was removed, whereas it decreased to the designed diameter after the volume shrinkage. Human umbilical vein endothelial cells (HUVECs) formed an endothelial monolayer in the engineered vasculature. Osteosarcoma cells (OCs) were loaded into a hierarchical vasculature within the thermoresponsive hydrogel to investigate the interaction between HUVECs and OCs. New blood vessel infiltration was observed within the lumen of the engineered vasculature after <i>in vivo</i> subcutaneous implantation for 4 weeks. In addition, engineered vasculature was implanted in a rat ischemia model to further study the function of engineered vasculature for blood vessel infiltration. This study presents a small method aiming to accurately create engineered vasculature by additive manufacturing and a sacrificebased technique.</p>","PeriodicalId":48522,"journal":{"name":"International Journal of Bioprinting","volume":"9 5","pages":"749"},"PeriodicalIF":6.8,"publicationDate":"2023-05-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://ftp.ncbi.nlm.nih.gov/pub/pmc/oa_pdf/33/7a/IJB-9-5-749.PMC10339422.pdf","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"9823678","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Colin H Quinn, Andee M Beierle, Janet R Julson, Michael E Erwin, Hasan Alrefai, Hooper R Markert, Jerry E Stewart, Sara Claire Hutchins, Laura V Bownes, Jamie M Aye, Elizabeth Mroczek-Musulman, Patricia H Hicks, Karina J Yoon, Christopher D Willey, Elizabeth A Beierle
{"title":"Using 3D-bioprinted models to study pediatric neural crest-derived tumors.","authors":"Colin H Quinn, Andee M Beierle, Janet R Julson, Michael E Erwin, Hasan Alrefai, Hooper R Markert, Jerry E Stewart, Sara Claire Hutchins, Laura V Bownes, Jamie M Aye, Elizabeth Mroczek-Musulman, Patricia H Hicks, Karina J Yoon, Christopher D Willey, Elizabeth A Beierle","doi":"10.18063/ijb.723","DOIUrl":"10.18063/ijb.723","url":null,"abstract":"<p><p>The use of three-dimensional (3D) bioprinting has remained at the forefront of tissue engineering and has recently been employed for generating bioprinted solid tumors to be used as cancer models to test therapeutics. In pediatrics, neural crest-derived tumors are the most common type of extracranial solid tumors. There are only a few tumor-specific therapies that directly target these tumors, and the lack of new therapies remains detrimental to improving the outcomes for these patients. The absence of more efficacious therapies for pediatric solid tumors, in general, may be due to the inability of the currently employed preclinical models to recapitulate the solid tumor phenotype. In this study, we utilized 3D bioprinting to generate neural crest-derived solid tumors. The bioprinted tumors consisted of cells from established cell lines and patient-derived xenograft tumors mixed with a 6% gelatin/1% sodium alginate bioink. The viability and morphology of the bioprints were analyzed via bioluminescence and immunohisto chemistry, respectively. We compared the bioprints to traditional twodimensional (2D) cell culture under conditions such as hypoxia and therapeutics. We successfully produced viable neural crest-derived tumors that retained the histology and immunostaining characteristics of the original parent tumors. The bioprinted tumors propagated in culture and grew in orthotopic murine models. Furthermore, compared to cells grown in traditional 2D culture, the bioprinted tumors were resistant to hypoxia and chemotherapeutics, suggesting that the bioprints exhibited a phenotype that is consistent with that seen clinically in solid tumors, thus potentially making this model superior to traditional 2D culture for preclinical investigations. Future applications of this technology entail the potential to rapidly print pediatric solid tumors for use in high-throughput drug studies, expediting the identification of novel, individualized therapies.</p>","PeriodicalId":48522,"journal":{"name":"International Journal of Bioprinting","volume":"9 4","pages":"723"},"PeriodicalIF":6.8,"publicationDate":"2023-03-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://ftp.ncbi.nlm.nih.gov/pub/pmc/oa_pdf/bc/be/IJB-9-4-723.PMC10261178.pdf","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"10411473","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
H. Fang, Jie Xu, Hailin Ma, Jiaqi Liu, Erpai Xing, Y. Cheng, Hong Wang, Yi Nie, Bo Pan, Kedong Song
{"title":"Functional materials of 3D bioprinting for wound dressings and skin tissue engineering applications: A review","authors":"H. Fang, Jie Xu, Hailin Ma, Jiaqi Liu, Erpai Xing, Y. Cheng, Hong Wang, Yi Nie, Bo Pan, Kedong Song","doi":"10.18063/ijb.757","DOIUrl":"https://doi.org/10.18063/ijb.757","url":null,"abstract":"The skin plays an important role in vitamin D synthesis, humoral balance, temperature regulation, and waste excretion. Due to the complexity of the skin, fluids loss, bacterial infection, and other life-threatening secondary complications caused by skin defects often lead to the damage of skin functions. 3D bioprinting technology, as a customized and precise biomanufacturing platform, can manufacture dressings and tissue engineering scaffolds that accurately simulate tissue structure, which is more conducive to wound healing. In recent years, with the development of emerging technologies, an increasing number of 3D-bioprinted wound dressings and skin tissue engineering scaffolds with multiple functions, such as antibacterial, antiinflammatory, antioxidant, hemostatic, and antitumor properties, have significantly improved wound healing and skin treatment. In this article, we review the process of wound healing and summarize the classification of 3D bioprinting technology. Following this, we shift our focus on the functional materials for wound dressing and skin tissue engineering, and also highlight the research progress and development direction of 3D-bioprinted multifunctional wound healing materials.","PeriodicalId":48522,"journal":{"name":"International Journal of Bioprinting","volume":"23 1","pages":""},"PeriodicalIF":8.4,"publicationDate":"2023-03-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83463564","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"3D printing of biomaterials for vascularized and innervated tissue regeneration.","authors":"Hongjian Zhang, Chengtie Wu","doi":"10.18063/ijb.706","DOIUrl":"10.18063/ijb.706","url":null,"abstract":"<p><p>Neurovascular networks play significant roles in the metabolism and regeneration of many tissues and organs in the human body. Blood vessels can transport sufficient oxygen, nutrients, and biological factors, while nerve fibers transmit excitation signals to targeted cells. However, traditional scaffolds cannot satisfy the requirement of stimulating angiogenesis and innervation in a timely manner due to the complexity of host neurovascular networks. Three-dimensional (3D) printing, as a versatile and favorable technique, provides an effective approach to fabricating biological scaffolds with biomimetic architectures and multimaterial compositions, which are capable of regulating multiple cell behaviors. This review paper presents a summary of the current progress in 3D-printed biomaterials for vascularized and innervated tissue regeneration by presenting skin, bone, and skeletal muscle tissues as an example. In addition, we highlight the crucial roles of blood vessels and nerve fibers in the process of tissue regeneration and discuss the future perspectives for engineering novel biomaterials. It is expected that 3D-printed biomaterials with angiogenesis and innervation properties can not only recapitulate the physiological microenvironment of damaged tissues but also rapidly integrate with host neurovascular networks, resulting in accelerated functional tissue regeneration.</p>","PeriodicalId":48522,"journal":{"name":"International Journal of Bioprinting","volume":"9 3","pages":"706"},"PeriodicalIF":6.8,"publicationDate":"2023-03-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://ftp.ncbi.nlm.nih.gov/pub/pmc/oa_pdf/79/7b/IJB-9-3-706.PMC10236343.pdf","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"9578371","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jiannan Li, Tara Shelby, Hossein Vahid Alizadeh, Hannah Shelby, Yunzhi Peter Yang
{"title":"Development and characterization of an automated active mixing platform for hydrogel bioink preparation.","authors":"Jiannan Li, Tara Shelby, Hossein Vahid Alizadeh, Hannah Shelby, Yunzhi Peter Yang","doi":"10.18063/ijb.705","DOIUrl":"10.18063/ijb.705","url":null,"abstract":"<p><p>Bioink preparation is an important yet challenging step for bioprinting with hydrogels, as it involves fast and homogeneous mixing of various viscous components. In this study, we have developed an automated active mixing platform (AAMP), which allows for high-quality preparation of hydrogel bioinks. The design of AAMP, adapted from syringe pumps, provides many advantages, including low cost, automated control, high precision, customizability, and great cytocompatibility, as well as the potential to intelligently detect the homogeneity. To demonstrate the capability of AAMP, mixing of different hydrogel components, including alginate and xanthan gum with and without Ca<sup>2+</sup>, alginate and Laponite, PEGDMA and xanthan gum, was performed to investigate an alginate hydrogel preparation process. Colorimetric analyses were carried out to evaluate the mixing outcome with AAMP. Result showed that AAMP can prepare homogeneous hydrogel mixing in a fast and automated fashion. A multiphysics COMSOL simulation is carried out to further validate the results. Moreover, cell viability and proliferation study were performed in a cell encapsulation mixing experiment to validate the cytocompatibility of the AAMP. The AAMP has demonstrated great capability in hydrogel bioink preparation and could therefore holds great promise and wide applications in bioprinting and tissue engineering.</p>","PeriodicalId":48522,"journal":{"name":"International Journal of Bioprinting","volume":"9 4","pages":"705"},"PeriodicalIF":6.8,"publicationDate":"2023-03-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://ftp.ncbi.nlm.nih.gov/pub/pmc/oa_pdf/29/11/IJB-9-4-705.PMC10261160.pdf","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"10028763","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}