Multidiscipline Modeling in Materials and Structures最新文献

{"title":"Thermoelastic micro-stretch solid immersed in an infinite inviscid fluid and subject to gravity under three-phase-lag model","authors":"M. Othman, Sarhan. Y. Atwa, E. E. Eraki, Mohamed F. Ismail","doi":"10.1108/mmms-08-2022-0162","DOIUrl":"https://doi.org/10.1108/mmms-08-2022-0162","url":null,"abstract":"PurposeIn this work, the thermoelastic response in a micro-stretch thermoelastic half-space submerged in an unlimited non-viscous fluid under gravity, the medium is studied using the three-phase-lag model (3PHL) and Green-Naghdi theory (G-N III).Design/methodology/approachThe normal mode analysis was the analytic technique used to obtain the exact formula of the physical quantities.FindingsThe magnesium crystal element is used as an application to compare the predictions induced by gravity on microstretch thermoelastic immersed in an infinite fluid of the three-phase-lag model with those for Green–Naghdi. Gravity has been noticed to have a major effect on all physical quantities. Comparisons were also made for three values of wave number and three values of the real part frequency.Originality/valueThis work is concerned with the thermoelastic micro-stretch solid immersed in an infinite and inviscid fluid and subjected to a gravitational field. The governing equations are formulated in the context of the 3PHL model and G-N theory. An analytical solution to the problem is obtained by employing normal mode analysis. Comparisons of the physical quantities are shown in figures to study the effects of gravity, wave number and the real part of the frequency.","PeriodicalId":46760,"journal":{"name":"Multidiscipline Modeling in Materials and Structures","volume":" ","pages":""},"PeriodicalIF":2.0,"publicationDate":"2022-11-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49553736","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Space time fractional Ito system with variable coefficients: explicit solution, conservation laws and numerical approximation","authors":"Baljinder Kour, M. Inc., Ashish Arora","doi":"10.1108/mmms-05-2022-0097","DOIUrl":"https://doi.org/10.1108/mmms-05-2022-0097","url":null,"abstract":"PurposeThe purpose of this paper is to present the residual power series method for solving the space time fractional variable coefficients Ito system.Design/methodology/approachA weighted algorithm based on the residual power series method is used numerical solution of the space time fractional Ito system variable coefficients. The authors show that this technique yields the analytical solution of the desired problem in the form of a rapidly convergent series with easily computable components.FindingsThe authors illustrate that the proposed method produces satisfactory results with respect to the other semi analytical methods. The reliability of the method and the reduction in the size of computational domain give this method a wider applicability.Originality/valueThis research presents, for the first time, a new modification of the proposed technique for aforementioned problems and some interesting results are obtained.","PeriodicalId":46760,"journal":{"name":"Multidiscipline Modeling in Materials and Structures","volume":" ","pages":""},"PeriodicalIF":2.0,"publicationDate":"2022-11-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45922351","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Nonlocal thermodynamical vibrations in a rotating magneto-thermoelastic medium based on modified Ohm's law with temperature-dependent properties","authors":"Sandeep Singh Sheoran, Shilpa Chaudhary, K. K. Kalkal","doi":"10.1108/mmms-05-2022-0089","DOIUrl":"https://doi.org/10.1108/mmms-05-2022-0089","url":null,"abstract":"PurposeThe purpose of this paper is to study the transient thermoelastic interactions in a nonlocal rotating magneto-thermoelastic medium with temperature-dependent properties. Three-phase-lag (TPL) model of generalized thermoelasticity is employed to study the problem. An initial magnetic field with constant intensity acts parallel to the bounding plane. Therefore, Maxwell's theory of electrodynamics has been effectively introduced and the expression for Lorentz's force is obtained with the help of modified Ohm's law.Design/methodology/approachThe normal mode technique has been adopted to solve the resulting non-dimensional coupled field equations to obtain the expressions of physical field variables.FindingsFor uniformly distributed thermal load, normal displacement, temperature distribution and stress components are calculated numerically with the help of MATLAB software for a copper material and the results are illustrated graphically. Some particular cases of interest are also deduced from the present study.Originality/valueInfluences of nonlocal parameter, rotation, temperature-dependent properties, magnetic field and time are carefully analyzed for mechanically stress free boundary and uniformly distributed thermal load. The present work is useful and valuable for analysis of problem involving thermal shock, nonlocal parameter, temperature-dependent elastic and thermal moduli.","PeriodicalId":46760,"journal":{"name":"Multidiscipline Modeling in Materials and Structures","volume":" ","pages":""},"PeriodicalIF":2.0,"publicationDate":"2022-11-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49231355","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"The effect of the properties of LaxNd8‒xB6 (x = 1,2,6)","authors":"Cengiz Bozada, Zihni Ozturk","doi":"10.1108/mmms-08-2022-0151","DOIUrl":"https://doi.org/10.1108/mmms-08-2022-0151","url":null,"abstract":"PurposeNanocrystalline LaB6, NdB6, Nd-doped LaB6 and La-doped NdB6 have been studied using the density functional theory (DFT) to study their electronic, optical and mechanical characteristics. The purpose of this paper is to address this issue.Design/methodology/approachNanocrystalline LaB6, NdB6, Nd-doped LaB6 and La-doped NdB6 have been studied using the DFT to study their electronic, optical and mechanical characteristics. The calculated lattice constants of LaB6, NdB6, Nd-doped LaB6 and La-doped NdB6 were 4.157, 4.118, 4.267 and 4.449, respectively. The lattice constant of La7Nd1B6 was increased when Nd is doped into LaB6. B p comprised the uppermost valence bands (VBs), whereas B s comprised the lowermost conduction bands (CBs). The authors’ results showed that La doping reduced the work function of NdB6 and increased its thermionic emission characteristics.FindingsThe authors’ results showed that La doping reduced the work function of NdB6 and increased its thermionic emission characteristics.Originality/valueThe work function of LaB6 was 2.7 eV, which is higher than that of La1Nd7B6 (2.64 eV).","PeriodicalId":46760,"journal":{"name":"Multidiscipline Modeling in Materials and Structures","volume":" ","pages":""},"PeriodicalIF":2.0,"publicationDate":"2022-10-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43370234","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Development and characterization of self-healing microcapsules, and optimization of production parameters for microcapsule diameter and core content","authors":"Çağatay Özada, Merve Ünal, Eslem Kuzu Şahin, Hakkı Özer, A. Motorcu, M. Yazıcı","doi":"10.1108/mmms-08-2022-0145","DOIUrl":"https://doi.org/10.1108/mmms-08-2022-0145","url":null,"abstract":"PurposeThis study produced epoxy-filled urea-formaldehyde (UF) microcapsules (MCs) and T-403 amine MCs using the in situ technique. The Taguchi method was used to determine the effects of the control factors (temperature, stirring speed, core-shell ratio and surfactant concentration) affecting MCs’ core diameter and core content and optimizing their optimum levels with a single criterion. Optimum control factor levels, which simultaneously provide maximum core diameter and core content of MCs, were determined by the PROMETHEE-GAIA multi-criteria optimization method. In addition, the optimized MC yield was analyzed by thermal camera images and compression test.Design/methodology/approachMicrocracks in materials used for aerospace vehicles and automotive parts cause serious problems, so research on self-healing in materials science becomes critical. The damages caused by micro-cracks need to heal themselves quickly. The study has three aims: (1) production of self-healing MCs, mechanical and chemical characterization of produced MCs, (2) single-criteria and multi-criteria optimization of parameters providing maximum MC core diameter and core content, (3) investigation of self-healing property of produced MCs and evaluation. Firstly, MCs were produced to achieve these goals.FindingsThe optimized micro cures are buried in the epoxy matrix at different concentrations. Thermal camera images after damage indicate the presence of healing. An epoxy-amine MC consisting of a 10% by weight filled aluminum sandwich panel was prepared and subjected to a quasi-static compression test. It was determined that there is a strong bond between the UF shell and the epoxy resin.Originality/valueThe optimization of production factors has been realized to produce the most efficient MCs that heal using less expensive and more accessible methods.","PeriodicalId":46760,"journal":{"name":"Multidiscipline Modeling in Materials and Structures","volume":" ","pages":""},"PeriodicalIF":2.0,"publicationDate":"2022-10-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42988620","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Second order slip flow of a conducting Jeffrey nanofluid in an inclined asymmetric porous conduit with heat and mass transfer","authors":"M. Ramamoorthy, Lakshminarayana Pallavarapu","doi":"10.1108/mmms-08-2022-0149","DOIUrl":"https://doi.org/10.1108/mmms-08-2022-0149","url":null,"abstract":"PurposeThe present work explores the influence of Hall and Ohmic heating effects on the convective peristaltic flow of a conducting Jeffrey nanofluid in an inclined porous asymmetric channel with slip. Also, the authors investigated the impact of viscous dissipation, thermal radiation, heat generation/absorption and cross diffusion effects on the flow. Peristaltic flow has many industrial and physiological applications and most of the biofluids show the non-Newtonian fluid behaviour. Further, in a living body, several biofluids flow through different kinds of systems that are not symmetric, horizontal or vertical. The purpose of this paper is to address these issues.Design/methodology/approachThe authors considered the flow of Jeffrey fluid which is generated by a sinusoidal wave propagating on the walls of an inclined asymmetric channel. The flow model is developed from the fixed frame to the wave frame. Finally, yield the nonlinear governing equations by applying the non-dimensional quantities with the assumptions of lengthy wave and negligible Reynolds number. The exact solution has been computed for the velocity and pressure gradient. The solutions for temperature and concentration are obtained by the regular perturbation technique.FindingsGraphical analysis is made for the present results for different values of emerging parameters and explained clearly. It is noticed that the magnetic field enriches the temperature where it drops the fluid velocity. This work describes that the temperature field is decreasing due to the radiation but it is a rising function of temperature slip parameter. The temperature profile declines for growing values of the Hall parameter. The flow velocity diminishes for boosting values of the Darcy parameter. Further, the authors perceived that the concentration field reduces for large values of the chemical reaction parameter.Originality/valueThe authors validated and compared the results with the existing literature. This investigation will help to study some physiological systems, and heat transfer in peristaltic transport plays key role in medical treatments, so we ensure that these results are applicable in medical treatments like cancer therapy, drug delivery, etc.","PeriodicalId":46760,"journal":{"name":"Multidiscipline Modeling in Materials and Structures","volume":"1 1","pages":""},"PeriodicalIF":2.0,"publicationDate":"2022-10-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"62114528","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Description of crystal defect properties in BCC Cr with extended Finnis–Sinclair potential","authors":"L. Wei, Fei Zhou, Shuo Wang, Weixun Hao, Y. Liu, Jingchuan Zhu","doi":"10.1108/mmms-08-2022-0143","DOIUrl":"https://doi.org/10.1108/mmms-08-2022-0143","url":null,"abstract":"PurposeThe purpose of this study is to propose extended potentials and investigate the applicability of extended Finnis–Sinclair (FS) potential to Cr with the unit cell structure of body-centered cubic (BCC Cr).Design/methodology/approachThe parameters of each potential are determined by fitting the elastic constants, cohesive energy and mono-vacancy formation energy. Furthermore, the ability of the extended FS potential to describe the crystal defect properties is tested. Finally, the applicability of reproducing the thermal properties of Cr is discussed.FindingsThe internal relationship between physical properties and potential function is revealed. The mathematical relationship between physical properties and potential function is derived in detail. The extended FS potential performs well in reproducing physical properties of BCC Cr, such as elastic constants, cohesive energy, surface energy and the properties of vacancy et al. Moreover, good agreement is obtained with the experimental data for predicting the melting point, specific heat and coefficient of thermal expansion.Originality/valueIn this study, new extended potentials are proposed. The extended FS potential is able to reproduce the physical and thermal properties of BCC Cr. Therefore, the new extended potential can be used to describe the crystal defect properties of BCC Cr.","PeriodicalId":46760,"journal":{"name":"Multidiscipline Modeling in Materials and Structures","volume":" ","pages":""},"PeriodicalIF":2.0,"publicationDate":"2022-10-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43024509","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Case study of high strength concrete mix proportioning optimization","authors":"T. Hadji, A. Attia","doi":"10.1108/mmms-07-2022-0132","DOIUrl":"https://doi.org/10.1108/mmms-07-2022-0132","url":null,"abstract":"PurposeThe purpose of this work is to discuss high-strength concrete mix proportioning optimization. In this study, the three parameters (W/B ratio), coarse aggregate maximum size (Dmax) and superplasticizer dosage (Sp%) were considered.Design/methodology/approachA full factorial design with three factors and two levels was carried out. The statistical analysis and analysis of variance of statistical models were made easier with the aid of JMP7 software. The generated models explain how each parameter affects the mechanical compressive strength at 28 days (Cs28) and slump, and they have an excellent determination coefficient (R2 = 0.99). For each high-strength concrete (HSC) mixture, the slump was measured four times: at 0 min, 20 min, 40 min and 60 min.FindingsThe results show that HSC6 (0.35(W/B), 12.5(Dmax), 1.4(Sp%)) is the best HSC mixture, with a (Cs28) of 71.84 MPa, a slump of 22 cm, and slump loss of 3.5 cm in 60 min.Originality/valueQuantifying the impact of high-strength concrete mix components from a small number of experiments is made achievable by combining two methods: the Dreux-Gorisse method and the full factorial design approach. It's possible to tune the mix proportioning of the high-strength concrete for the desired slump and compressive mechanical strength thanks to the created statistical models.","PeriodicalId":46760,"journal":{"name":"Multidiscipline Modeling in Materials and Structures","volume":" ","pages":""},"PeriodicalIF":2.0,"publicationDate":"2022-10-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45938987","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"The solutions of dissipation-dispersive models arising in material science","authors":"Zehra Pinar Izgi","doi":"10.1108/mmms-06-2022-0119","DOIUrl":"https://doi.org/10.1108/mmms-06-2022-0119","url":null,"abstract":"PurposeThe aim of this work is to obtain periodic waves of Eq. (1) via ansatz-based methods. So, the open questions are replied and the gap will be filled in the literature. Additionally, the comparison of the considered models (Eq. (1) and Eq. (2)) due to their performance. Although it is extremely difficult to find the exact wave solutions in Eq. (1) and Eq. (2) without any assumptions, the targeted solutions have been obtained with the chosen method.Design/methodology/approachMaterial science is the today's popular research area. So, the well-known model is the dissipation double dispersive nonlinear equation and, in the literature, open queries have been seen. The aim of this work is to reply open queries by obtaining wave solutions of the dissipation double dispersive model, double dispersive model and double dispersive model for Murnaghan's material via ansatz-based methods.FindingsThe results have been appeared for the first time in this communication work and they may be valuable for developing uses in material science.Originality/valueThe exact wave solutions of Eq. (1) and Eq. (2) without any assumptions have been obtained with via ansatz-based method. So, the open questions are replied and the gap will be filled in the literature.","PeriodicalId":46760,"journal":{"name":"Multidiscipline Modeling in Materials and Structures","volume":" ","pages":""},"PeriodicalIF":2.0,"publicationDate":"2022-10-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46681628","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Qualitative and quantitative interdependence of mechanical properties of industrially extruded AA6063 alloy on process parameters and profile characteristics","authors":"A. K. Abdul Jawwad, A. Al-Bashir, Mohammad Saleem, Bassam Hasanain","doi":"10.1108/mmms-06-2022-0111","DOIUrl":"https://doi.org/10.1108/mmms-06-2022-0111","url":null,"abstract":"PurposeThis study aims to investigate and model interrelationships between process parameters, geometrical profile characteristics and mechanical properties of industrially extruded aluminum alloys.Design/methodology/approachStatistical design of experiments (DOE) was applied to investigate and model the effects of eight factors including extrusion ratio, stem speed, billet-preheat temperature, number of die cavities, quenching media (water/air), time and temperature of artificial aging treatment and profile nominal thickness on four mechanical properties (yield strength, ultimate tensile strength, percent elongation and hardness). Experiments were carried out at an actual extrusion plant using 8-in. diameter billets on an extrusion press with 2,200 ton capacity.FindingsMain factors and factor interactions controlling mechanical properties were identified and discussed qualitatively. Quantitative models with high prediction accuracy (in excess of 95%) were also obtained and discussed.Practical implicationsThe obtained results are believed to be of great importance to researchers and industrial practitioners in the aluminum extrusion industry.Originality/valueAll practical and relevant parameters have been used to model all important mechanical properties in a collective manner in one study and within actual industrial setup. This is in contrast to all previous studies where either a partial set of parameters and/or mechanical properties are discussed and mostly under limited laboratory setup.","PeriodicalId":46760,"journal":{"name":"Multidiscipline Modeling in Materials and Structures","volume":"1 1","pages":""},"PeriodicalIF":2.0,"publicationDate":"2022-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41336153","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}