RecyclingPub Date : 2024-02-08DOI: 10.3390/recycling9010018
Tomoko Okayama, Kohei Watanabe
{"title":"Performance of the Food Waste Recycling Law in Japan with Reference to SDG 12.3","authors":"Tomoko Okayama, Kohei Watanabe","doi":"10.3390/recycling9010018","DOIUrl":"https://doi.org/10.3390/recycling9010018","url":null,"abstract":"SDG target 12.3 calls for halving food waste in retail, food service, and households by 2030. The food waste index developed for this purpose includes parts attached to food that are usually removed intentionally (“unavoidable food waste”) and counts conversion into animal feed and utilisation as biomaterial as a means of reduction. In Japan, the “Food Waste Recycling Law”, which has been in effect since 2001, promotes the recycling of food waste generated from businesses, designating feed conversion as a top priority. On the other hand, based on the more recent “Food Loss Reduction Promotion Act” of 2019, the government is currently promoting reduction in avoidable food waste to meet the SDG target. Based on statistical sources and interviews with ministry officers, this paper explains the history and achievements of Japan’s 23-year policy based on the Food Recycling Law, as well as the tension between the two legislations.","PeriodicalId":36729,"journal":{"name":"Recycling","volume":null,"pages":null},"PeriodicalIF":4.3,"publicationDate":"2024-02-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139851096","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
RecyclingPub Date : 2024-02-07DOI: 10.3390/recycling9010017
Manan Bhandari, Il-Woo Nam
{"title":"A Critical Review on the Application of Recycled Carbon Fiber to Concrete and Cement Composites","authors":"Manan Bhandari, Il-Woo Nam","doi":"10.3390/recycling9010017","DOIUrl":"https://doi.org/10.3390/recycling9010017","url":null,"abstract":"Carbon fiber (CF) exhibit extraordinary properties, such as high specific and tensile strength, high elastic modulus, light weight, and weather resistance, which has led to a rapid increase in the use of CF in sectors such as aerospace, sports equipment, energy storage, automotive, construction, and wind energy applications. However, the increase in CF applications has led to a massive production of CF waste. As CF is non-biodegradable, it results in CF accumulation in landfills. CF waste is a rapidly growing ecological hazard because of its high energy consumption and expensive production methods. The properties of carbon fibers can be preserved even after recycling given the development of recycling technology; therefore, multiple studies have been conducted to demonstrate the effect of recycled carbon fiber (RCF) in different composites such as cement-based composites. This review presents the results of studies conducted on the application of RCF to cement composites and analyzes those results to investigate the effect of RCF on the properties of cement composites such as mechanical properties (compressive strength, flexural strength, and tensile strength), fracture characteristics (fracture toughness and fracture energy), electrical properties, and workability. Overall, the studies demonstrated a positive trend in the application of RCF to cement composites.","PeriodicalId":36729,"journal":{"name":"Recycling","volume":null,"pages":null},"PeriodicalIF":4.3,"publicationDate":"2024-02-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139855667","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
RecyclingPub Date : 2024-02-07DOI: 10.3390/recycling9010017
Manan Bhandari, Il-Woo Nam
{"title":"A Critical Review on the Application of Recycled Carbon Fiber to Concrete and Cement Composites","authors":"Manan Bhandari, Il-Woo Nam","doi":"10.3390/recycling9010017","DOIUrl":"https://doi.org/10.3390/recycling9010017","url":null,"abstract":"Carbon fiber (CF) exhibit extraordinary properties, such as high specific and tensile strength, high elastic modulus, light weight, and weather resistance, which has led to a rapid increase in the use of CF in sectors such as aerospace, sports equipment, energy storage, automotive, construction, and wind energy applications. However, the increase in CF applications has led to a massive production of CF waste. As CF is non-biodegradable, it results in CF accumulation in landfills. CF waste is a rapidly growing ecological hazard because of its high energy consumption and expensive production methods. The properties of carbon fibers can be preserved even after recycling given the development of recycling technology; therefore, multiple studies have been conducted to demonstrate the effect of recycled carbon fiber (RCF) in different composites such as cement-based composites. This review presents the results of studies conducted on the application of RCF to cement composites and analyzes those results to investigate the effect of RCF on the properties of cement composites such as mechanical properties (compressive strength, flexural strength, and tensile strength), fracture characteristics (fracture toughness and fracture energy), electrical properties, and workability. Overall, the studies demonstrated a positive trend in the application of RCF to cement composites.","PeriodicalId":36729,"journal":{"name":"Recycling","volume":null,"pages":null},"PeriodicalIF":4.3,"publicationDate":"2024-02-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139795629","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
RecyclingPub Date : 2024-02-07DOI: 10.3390/recycling9010016
Marios Valanides, Konstantinos Aivaliotis, K. Oikonomopoulou, Alexandros Fikardos, P. Savva, K. Sakkas, D. Nicolaides
{"title":"Geopolymerization of Recycled Glass Waste: A Sustainable Solution for a Lightweight and Fire-Resistant Material","authors":"Marios Valanides, Konstantinos Aivaliotis, K. Oikonomopoulou, Alexandros Fikardos, P. Savva, K. Sakkas, D. Nicolaides","doi":"10.3390/recycling9010016","DOIUrl":"https://doi.org/10.3390/recycling9010016","url":null,"abstract":"Glass is considered a sustainable material with achievable recovery rates within the EU. However, there are limited data available for construction glass waste management. Furthermore, glass is a heavy material, and considering the geographical limitations of Cyprus, the transportation trading cost within the EU is extremely high. Therefore, another method for utilizing this by-product should be developed. The aim of this research is to investigate the production of a low-cost, lightweight and fireproof material able to retain its structural integrity, using the geopolymerization method with the incorporation of randomly collected construction glass waste. The glass waste was initially processed in a Los Angeles abrasion machine and then through a Micro-Deval apparatus in order to be converted to a fine powder. Mechanical (compressive and flexural strength), physical (setting time and water absorption) and thermal properties (thermal conductivity) were investigated. The fire-resistant materials presented densities averaging 450 kg/m3 with a range of compressive strengths of 0.5 to 3 MPa. Additionally, a techno-economic analysis was conducted to evaluate the viability of the adopted material. Based on the results, the final geopolymer product has the potential to be utilized as a fire resistance material, preventing yielding or spalling.","PeriodicalId":36729,"journal":{"name":"Recycling","volume":null,"pages":null},"PeriodicalIF":4.3,"publicationDate":"2024-02-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139855577","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
RecyclingPub Date : 2024-02-07DOI: 10.3390/recycling9010016
Marios Valanides, Konstantinos Aivaliotis, K. Oikonomopoulou, Alexandros Fikardos, P. Savva, K. Sakkas, D. Nicolaides
{"title":"Geopolymerization of Recycled Glass Waste: A Sustainable Solution for a Lightweight and Fire-Resistant Material","authors":"Marios Valanides, Konstantinos Aivaliotis, K. Oikonomopoulou, Alexandros Fikardos, P. Savva, K. Sakkas, D. Nicolaides","doi":"10.3390/recycling9010016","DOIUrl":"https://doi.org/10.3390/recycling9010016","url":null,"abstract":"Glass is considered a sustainable material with achievable recovery rates within the EU. However, there are limited data available for construction glass waste management. Furthermore, glass is a heavy material, and considering the geographical limitations of Cyprus, the transportation trading cost within the EU is extremely high. Therefore, another method for utilizing this by-product should be developed. The aim of this research is to investigate the production of a low-cost, lightweight and fireproof material able to retain its structural integrity, using the geopolymerization method with the incorporation of randomly collected construction glass waste. The glass waste was initially processed in a Los Angeles abrasion machine and then through a Micro-Deval apparatus in order to be converted to a fine powder. Mechanical (compressive and flexural strength), physical (setting time and water absorption) and thermal properties (thermal conductivity) were investigated. The fire-resistant materials presented densities averaging 450 kg/m3 with a range of compressive strengths of 0.5 to 3 MPa. Additionally, a techno-economic analysis was conducted to evaluate the viability of the adopted material. Based on the results, the final geopolymer product has the potential to be utilized as a fire resistance material, preventing yielding or spalling.","PeriodicalId":36729,"journal":{"name":"Recycling","volume":null,"pages":null},"PeriodicalIF":4.3,"publicationDate":"2024-02-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139795738","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
RecyclingPub Date : 2024-02-06DOI: 10.3390/recycling9010015
Balasubramaniam Prabha, D. Ramesh, Srinivasan Sriramajayam, Doraiswamy Uma
{"title":"Optimization of Pyrolysis Process Parameters for Fuel Oil Production from the Thermal Recycling of Waste Polypropylene Grocery Bags Using the Box–Behnken Design","authors":"Balasubramaniam Prabha, D. Ramesh, Srinivasan Sriramajayam, Doraiswamy Uma","doi":"10.3390/recycling9010015","DOIUrl":"https://doi.org/10.3390/recycling9010015","url":null,"abstract":"The impact of dumping plastic waste is realized in different ecosystems of the planet. Several methods have been adopted to dispose of these wastes for energy recovery. This study, for the first time, proposed the Box–Behnken design technique to optimize the pyrolysis process parameters for fuel oil production from waste polypropylene (PP) grocery bags using a semibatch-type pyrolytic reactor. The semibatch-type pyrolytic reactor was developed and employed to produce fuel oil from waste PP grocery bags. The effect of different process parameters on fuel oil production was comprehensively analyzed using the response surface methodology (RSM) with the conjunction of the Box–Behnken design (BBD). The BBD facilitates the prediction of the response variables with respect to changes in the input variables by developing a response model. The BBD was used to optimize the process parameters, such as the reaction temperature (400–550 °C), nitrogen flow rate (5–20 mL min−1), and substrate feed rate (0.25–1.5 kg h−1), and their effect on the responses were observed. The optimum response yields of the fuel oil (89.34 %), solid residue (2.74%), and gas yield (7.92%) were obtained with an optimized temperature (481 °C), a nitrogen flow rate (13 mL min−1), and a feed rate (0.61 kg h−1). The quadratic model obtained for the fuel oil response denotes the greater R2 value (0.99). The specific gravity and calorific value of the fuel oil were found to be 0.787 and 45.42 MJ kg−1, respectively. The fuel oil had higher research octane number (RON) (100.0 min) and motor octane number (MON) (85.1 min) values. These characteristics of the fuel oil were matched with conventional petroleum fuels. Further, Fourier transform infrared spectroscopy (FT-IR) and gas chromatography–mass spectroscopy (GC-MS) were used to analyze the fuel oil, and the results revealed that the fuel oil was enriched with different hydrocarbons, namely, alkane (paraffins) and alkene (olefins), in the carbon range of C4–C20. These results, and also the fractional distillation of the fuel oil, show the presence of petroleum-range hydrocarbons in the waste PP fuel oil.","PeriodicalId":36729,"journal":{"name":"Recycling","volume":null,"pages":null},"PeriodicalIF":4.3,"publicationDate":"2024-02-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139862116","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
RecyclingPub Date : 2024-02-06DOI: 10.3390/recycling9010015
Balasubramaniam Prabha, D. Ramesh, Srinivasan Sriramajayam, Doraiswamy Uma
{"title":"Optimization of Pyrolysis Process Parameters for Fuel Oil Production from the Thermal Recycling of Waste Polypropylene Grocery Bags Using the Box–Behnken Design","authors":"Balasubramaniam Prabha, D. Ramesh, Srinivasan Sriramajayam, Doraiswamy Uma","doi":"10.3390/recycling9010015","DOIUrl":"https://doi.org/10.3390/recycling9010015","url":null,"abstract":"The impact of dumping plastic waste is realized in different ecosystems of the planet. Several methods have been adopted to dispose of these wastes for energy recovery. This study, for the first time, proposed the Box–Behnken design technique to optimize the pyrolysis process parameters for fuel oil production from waste polypropylene (PP) grocery bags using a semibatch-type pyrolytic reactor. The semibatch-type pyrolytic reactor was developed and employed to produce fuel oil from waste PP grocery bags. The effect of different process parameters on fuel oil production was comprehensively analyzed using the response surface methodology (RSM) with the conjunction of the Box–Behnken design (BBD). The BBD facilitates the prediction of the response variables with respect to changes in the input variables by developing a response model. The BBD was used to optimize the process parameters, such as the reaction temperature (400–550 °C), nitrogen flow rate (5–20 mL min−1), and substrate feed rate (0.25–1.5 kg h−1), and their effect on the responses were observed. The optimum response yields of the fuel oil (89.34 %), solid residue (2.74%), and gas yield (7.92%) were obtained with an optimized temperature (481 °C), a nitrogen flow rate (13 mL min−1), and a feed rate (0.61 kg h−1). The quadratic model obtained for the fuel oil response denotes the greater R2 value (0.99). The specific gravity and calorific value of the fuel oil were found to be 0.787 and 45.42 MJ kg−1, respectively. The fuel oil had higher research octane number (RON) (100.0 min) and motor octane number (MON) (85.1 min) values. These characteristics of the fuel oil were matched with conventional petroleum fuels. Further, Fourier transform infrared spectroscopy (FT-IR) and gas chromatography–mass spectroscopy (GC-MS) were used to analyze the fuel oil, and the results revealed that the fuel oil was enriched with different hydrocarbons, namely, alkane (paraffins) and alkene (olefins), in the carbon range of C4–C20. These results, and also the fractional distillation of the fuel oil, show the presence of petroleum-range hydrocarbons in the waste PP fuel oil.","PeriodicalId":36729,"journal":{"name":"Recycling","volume":null,"pages":null},"PeriodicalIF":4.3,"publicationDate":"2024-02-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139802194","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
RecyclingPub Date : 2024-02-04DOI: 10.3390/recycling9010014
Łukasz Bernat, Tomasz Jurtsch, Grzegorz Moryson, Jan Moryson, Grzegorz Wiczyński
{"title":"Effect of Surface Condition on the Results of Chemical Composition Measurements of Scrap Copper Alloys","authors":"Łukasz Bernat, Tomasz Jurtsch, Grzegorz Moryson, Jan Moryson, Grzegorz Wiczyński","doi":"10.3390/recycling9010014","DOIUrl":"https://doi.org/10.3390/recycling9010014","url":null,"abstract":"The processing of copper-bearing scrap makes it possible to reduce the costs and energy consumption of obtaining copper alloy products compared to producing them from primary raw materials. To achieve this, it is necessary to quickly and accurately determine the content of alloying elements in individual scrap elements. However, the copper-bearing scrap obtained at secondary raw materials collection points consists of elements with various surface conditions (due to contamination, shape, paint coatings, roughness, etc.). The paper contains research results on the influence of surface roughness and paint coatings on the measurement result of the content of alloying elements in copper-bearing scrap. Three mobile spectrometers were used for measurements: spark-induced optical emission spectroscopy (OES), X-ray fluorescence spectrometry (XRF) and laser-induced breakdown spectroscopy (LIBS). The tests used elements with different surface roughness (from Ra = 0.03 μm to 6.7 μm) and covered with various types of varnish (alkyd, water-based, oil-phthalic, acrylic, oil-alkyd). It was found that the roughness of Ra < 2 μm does not significantly affect the results of the measurements with the OES and LIBS spectrometers, and a larger scatter of measurement results was observed for the XRF spectrometer compared to OES and LIBS. For Ra > 2 μm, a significant impact of roughness was found on the measurement results (this may result in the erroneous classification of the scrap as an incorrect material group). The influence of paint coatings on the measurement is much stronger compared to surface roughness. Even a single layer of paint can cause a change in the measurement result of the content of alloying elements by more than 10%. In the case of an OES spectrometer, paint coatings may prevent the measurement from being performed (which means that no measurement result can be acquired).","PeriodicalId":36729,"journal":{"name":"Recycling","volume":null,"pages":null},"PeriodicalIF":4.3,"publicationDate":"2024-02-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139866523","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
RecyclingPub Date : 2024-02-04DOI: 10.3390/recycling9010013
Mattia Gianvincenzi, E. Mosconi, Marco Marconi, Francesco Tola
{"title":"Battery Waste Management in Europe: Black Mass Hazardousness and Recycling Strategies in the Light of an Evolving Competitive Regulation","authors":"Mattia Gianvincenzi, E. Mosconi, Marco Marconi, Francesco Tola","doi":"10.3390/recycling9010013","DOIUrl":"https://doi.org/10.3390/recycling9010013","url":null,"abstract":"The increasing significance of batteries in the 21st century and the challenges posed by the anticipated surge in end-of-life batteries, particularly within the European context, are examined in this study. Forecasts predict a notable escalation in battery waste, necessitating a focus on the recycling of black mass (BM)—a complex and hazardous byproduct of the battery recycling process. Employing systematic analysis, this research investigates the hazardous nature of BM derived from various battery types. The study underscores the urgent need for definitive legislative classification of BM’s hazardous properties (HPs), in accordance with European regulations. This comprehensive examination of BM’s HPs contributes significantly to the understanding of BM recycling complexities, proving essential for industry stakeholders and guiding future developments in this field. Additionally, the study explores innovative technologies and strategies that could improve recycling efficiency and reduce associated risks. A pivotal finding of this investigation is the inherently hazardous nature of BM, leading to the recommendation that BM should be classified at a minimum under the “HP3—Flammable” category. This discovery underscores the critical need for stringent management protocols and robust regulatory frameworks to address the burgeoning challenge of battery waste in Europe.","PeriodicalId":36729,"journal":{"name":"Recycling","volume":null,"pages":null},"PeriodicalIF":4.3,"publicationDate":"2024-02-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139867686","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
RecyclingPub Date : 2024-02-04DOI: 10.3390/recycling9010014
Łukasz Bernat, Tomasz Jurtsch, Grzegorz Moryson, Jan Moryson, Grzegorz Wiczyński
{"title":"Effect of Surface Condition on the Results of Chemical Composition Measurements of Scrap Copper Alloys","authors":"Łukasz Bernat, Tomasz Jurtsch, Grzegorz Moryson, Jan Moryson, Grzegorz Wiczyński","doi":"10.3390/recycling9010014","DOIUrl":"https://doi.org/10.3390/recycling9010014","url":null,"abstract":"The processing of copper-bearing scrap makes it possible to reduce the costs and energy consumption of obtaining copper alloy products compared to producing them from primary raw materials. To achieve this, it is necessary to quickly and accurately determine the content of alloying elements in individual scrap elements. However, the copper-bearing scrap obtained at secondary raw materials collection points consists of elements with various surface conditions (due to contamination, shape, paint coatings, roughness, etc.). The paper contains research results on the influence of surface roughness and paint coatings on the measurement result of the content of alloying elements in copper-bearing scrap. Three mobile spectrometers were used for measurements: spark-induced optical emission spectroscopy (OES), X-ray fluorescence spectrometry (XRF) and laser-induced breakdown spectroscopy (LIBS). The tests used elements with different surface roughness (from Ra = 0.03 μm to 6.7 μm) and covered with various types of varnish (alkyd, water-based, oil-phthalic, acrylic, oil-alkyd). It was found that the roughness of Ra < 2 μm does not significantly affect the results of the measurements with the OES and LIBS spectrometers, and a larger scatter of measurement results was observed for the XRF spectrometer compared to OES and LIBS. For Ra > 2 μm, a significant impact of roughness was found on the measurement results (this may result in the erroneous classification of the scrap as an incorrect material group). The influence of paint coatings on the measurement is much stronger compared to surface roughness. Even a single layer of paint can cause a change in the measurement result of the content of alloying elements by more than 10%. In the case of an OES spectrometer, paint coatings may prevent the measurement from being performed (which means that no measurement result can be acquired).","PeriodicalId":36729,"journal":{"name":"Recycling","volume":null,"pages":null},"PeriodicalIF":4.3,"publicationDate":"2024-02-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139806375","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}