Volume 10: Petroleum Technology最新文献

{"title":"Rheological and Mechanical Properties of Rock-Based Geopolymers Developed for Well Abandonment: Effect of Chemical Admixtures at Elevated Temperatures","authors":"Fawzi Chamssine, M. Khalifeh, A. Saasen","doi":"10.1115/omae2022-78376","DOIUrl":"https://doi.org/10.1115/omae2022-78376","url":null,"abstract":"\u0000 Examination of alternative cementitious material cured under elevated temperatures is essential to qualify their applicability in field operations. Geopolymers rise as an alternative for Ordinary Portland Cement in oil and gas applications due to its lower carbon footprint and raw material availability. Using chemical admixtures is crucial to engineer geopolymer material for displacement and to maintain well integrity and zonal isolation under elevated temperature and pressure. In this study, the rheological and mechanical properties of rock-based geopolymers, developed for utilization at elevated temperatures, have been examined with the addition of chemical admixtures to test their performance under operational conditions. Neat Class-G cement, by Dyckerhoff, was used as a reference sample for comparison at elevated conditions. The effect of Zn2+, K+, Na+ and Ca2+ species was examined on geopolymer properties. Samples were cured for 1,3, and 7 days at bottomhole static conditions. Properties examined in this study include workability, fluid loss, and viscosity for slurry properties. On the other hand, sonic strength, uniaxial compressive strength, and tensile strength were examined throughout the curing periods. The obtained results exhibited an enhancement in overall properties with an increase in workability and overall strength of the material while considering the poisoning effects from the usage of Zn2+ species. It was concluded that the combination of Na+ and Ca2+compensated the poisoning effect foreseen by the addition of Zn2+ species in geopolymer systems.","PeriodicalId":363084,"journal":{"name":"Volume 10: Petroleum Technology","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127418877","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Experimental Investigation of Flow Velocity Dispersion in Annuli","authors":"B. Lund, J. D. Ytrehus, A. Taghipour, A. Saasen","doi":"10.1115/omae2022-79937","DOIUrl":"https://doi.org/10.1115/omae2022-79937","url":null,"abstract":"\u0000 Deviated well sections are common in modern well construction. In mature areas like the North Sea region, practically all producers or injector wells will have highly deviated sections. These wells must be completed in an optimal manner including annular barrier integrity. This is important for zonal isolation through all stages of the well’s life cycle. Since all wells must be permanently plugged before abandonment it is important to ensure that annular barriers are designed with a long term perspective and not only to minimize construction time and cost. Controlled laboratory environments with various fluid compositions and flow parameters are important to develop, validate and improve models and practices. Cement displacement is normally the objective for such studies. Due to selection of fluids, data for casing cleaning operations are in reality derived.\u0000 Fundamental flow properties are investigated qualitatively. Water with and without viscosifiers is used to displace similar fluids from the annular section. The effects of inner pipe rotation are included. It is shown how this gives fundamental data providing a relevant background for understanding displacement processes.\u0000 The experiments have been performed in a flow loop that consists of a 10 meters long test section with 5″ OD transparent pipe inside a 6,5″ transparent pipe. Experiments were performed with concentric and eccentric horizontal annulus and both with rotating and non-rotating inner pipe. The applied flow loop dimensions are designed so that the results should be relevant for highly inclined sections in field operation.","PeriodicalId":363084,"journal":{"name":"Volume 10: Petroleum Technology","volume":"69 3","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114034672","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"A Review on the Use of Chemicals as Steam Additives for Thermal Oil Recovery Applications","authors":"Xuan Du, Changfeng Xi, Lanxiang Shi, Bojun Wang, Zongyao Qi, Tong Liu, You Zhou, Jungin Lee, T. Babadagli, H. Li","doi":"10.1115/omae2021-62543","DOIUrl":"https://doi.org/10.1115/omae2021-62543","url":null,"abstract":"\u0000 This study conducts a literature survey on the chemical steam additives tested in both lab and field settings from 1982 to present (2020). We summarize the major recovery mechanisms of both steam-based recovery process and steam-chemical-based recovery process. Next, we review the previous lab-scale/field-scale studies examining the applications of surfactants, alkali, and novel chemicals in the steam-based oil recovery process. Among the different surfactants studied, alpha-olefin sulfonate (AOS) and linear toluene sulfonate (LTS) are the recommended chemicals for their foam control/detergency effect. In particular, AOS was observed to perform especially well in residual oil saturation (ROS) reduction and sweep efficiency improvement when being co-injected with alkali. Application of organic alkali (alone or with a co-surfactant) has also drawn wide attention recently, but its efficacy in the field requires further investigation and the consumption of alkali by sands/clay is often an inevitable issue and, therefore, how to control the alkali loss requires further investigation. Novel chemical additives tested in the past five years include fatty acids (such as tail oil acid, TOA-Na+), Biodiesel (o/w emulsion), along with other types of chemical additives including switchable hydrophilicity tertiary amines (SHTA), chelating agents, Deep Eutectic Solvents (DES), graphite and SiO2 particles, ionic liquids and urea. High thermal stability of some of the novel chemicals and their potential in increasing displacement efficiency and ROS reduction efficiency in the lab studies require further investigation for their optimized application in the field settings to minimize the use of steam while improving the recovery effectively. This review reveals that when being properly applied, chemical additives can improve oil recovery via steam foam control, detergency effect (IFT reduction and wettability control), and viscosity reduction. In certain cases, microemulsion generation could be observed (o/w or w/o) with the addition of chemical additives at steam condition (which leads to recovery improvement), but the microemulsion effect on the conformance control (separate from the foamy effect), is lacking detailed investigation.","PeriodicalId":363084,"journal":{"name":"Volume 10: Petroleum Technology","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129815180","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Real Gas Effect on Gas Slippage Phenomenon in Shale","authors":"Yufei Chen, J. Leung, Changbao Jiang, A. Wojtanowicz","doi":"10.1115/omae2021-62684","DOIUrl":"https://doi.org/10.1115/omae2021-62684","url":null,"abstract":"\u0000 The past decade has seen the rapid development of shale gas across the world, as the record-breaking success and on-going surge of commercial shale gas production in such unconventional reservoirs pose a tremendous potential to meet the global energy supply. However, questions have been raised about the intricate gas transport mechanisms in the shale matrix, of which the gas slippage phenomenon is one of the key mechanisms for enhancing the fluid transport capacity and, therefore, the overall gas production. Given that shale reservoirs are often naturally deposited in the deep underground formations at high pressure and temperature conditions (much deeper than most typical conventional deposits), the real gas effect cannot be ignored as gas properties may vary significantly under such conditions. The purpose of this study is thus to investigate the real gas effect on the gas slippage phenomenon in shale by taking into account the gas compressibility factor (Z) and Knudsen number (Kn).\u0000 This study begins with a specific determination of Z for natural gas at various pressures and temperatures under the real gas effect, followed by several calculations of the gas molecular mean free path at in-situ conditions. Following this, the real gas effect on gas slippage phenomenon in shale is specifically analyzed by examining the change in Knudsen number. Also discussed are the permeability deviation from Darcy flux (non-Darcy flow) due to the combination of gas slippage and real gas effect and the specific range of pressure and pore size for gas slippage phenomenon in shale reservoirs.\u0000 The results show that the gas molecular mean free path generally increases with decreasing pressure, especially at relatively low pressures (< 20 MPa). And, increasing temperature will cause the gas molecular mean free path to rise, also at low pressures. Knudsen number of an ideal gas is greater than that of a real gas; while lower than that of a real gas as pressure continues to rise. That is, the real gas effect suppresses the gas slippage phenomenon at low pressures, while enhancing it at high pressures. Also, Darcy’s law starts deviating when Kn > 0.01 and becomes invalid at high Knudsen numbers, and this deviation increases with decreasing pore size. No matter how pore size varies, this deviation increases with decreasing pressure, meaning that the gas slippage effect is significant at low pressures. Finally, slip flow dominates in the various gas transport mechanisms given the typical range of pressure and pore size in shale reservoirs (1 MPa < P < 80 MPa; 3 nm < d < 3000 nm). Gas transport in shale is predominantly controlled by the slippage effect that mostly occurs in micro- or meso-pores (10 to 200 nm). Moreover, considering the real gas effect would improve the accuracy for determining the specific pressure range of the gas slippage phenomenon in shale.","PeriodicalId":363084,"journal":{"name":"Volume 10: Petroleum Technology","volume":"70 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126492845","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Water Management and Hydraulic Fracturing Operations in Middle Eastern Tight Gas Reservoirs","authors":"A. Suboyin, Md. Motiur Rahman, M. Haroun","doi":"10.1115/omae2021-62784","DOIUrl":"https://doi.org/10.1115/omae2021-62784","url":null,"abstract":"\u0000 Tight gas reservoirs in the Middle East are renowned for their extremely low porosity and low permeability along with their high heterogeneity. Over the past few decades, hydraulic fracturing has gained significant attention, particularly to stimulate such formations which were previously considered uneconomical and inefficient.\u0000 Even though over a million hydraulic fracturing operations were conducted across the globe, they are still associated with a considerable amount of risk. Studies have shown that an effective, efficient and economical approach coupled with tailored water management strategies are critical for their successful development, especially in arid regions such as the Middle East.\u0000 In this research, a realistic field model was constructed and advanced to analyze hydraulic fracture propagation in the presence of natural fractures for a candidate Middle Eastern tight gas reservoir. This flexible simulation model allowed to investigate, identify and characterize the key fracture design parameters that influenced fracture geometry for the candidate field. This further allowed to categorize and propose a unique tailored workflow to highlight the governing parameters for efficient water management strategies for arid regions such as the Middle East. In addition, the results have been extended to current field practices and cases.\u0000 The constructed model can greatly assist in streamlining hydraulic fracturing operations and water management strategies in regions such as the Middle East, where resources such as water and proppants can be considered as constraints. In addition, the investigation further highlights the strong need and potential opportunities for the key players in the region to leverage their technology for an efficient water management value chain. The variables and the workflow presented in this study further demonstrates how there is no bespoke solution to a ‘best approach’ in such regions. However, a workflow identifying the key dominant categories, such as a tailored one proposed in this study, may assist in the creation of more efficient and practical strategies while contributing to the overall process chain.","PeriodicalId":363084,"journal":{"name":"Volume 10: Petroleum Technology","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114689179","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Algorithms and Models for Smart Well Planning With Emphasis on Trajectory Optimization","authors":"E. Wiktorski, D. Sui","doi":"10.1115/omae2021-62731","DOIUrl":"https://doi.org/10.1115/omae2021-62731","url":null,"abstract":"\u0000 Well planning is a time-demanding procedure, which integrates knowledge and experience of various field professionals, as drilling engineers, pipe manufacturers, drilling mud specialists, geologists, etc. According to OG21 report (1), time spent for planning a well is on average 2–3 months. Drilling engineers have to design a well at minimum costs maintaining wellbore integrity at any time. The wellbore should also allow for maximum production from the reservoir and minimum tortuosity for successful casing running and completion. Fortunately, in the well-explored geological areas, where stratigraphic sequences and corresponding geopressures are known, the main objective can be narrowed down to optimal trajectory design. Optimal wellbore trajectory considers at least three criteria: shortest possible path, collision avoidance and longest possible contact with reservoir.\u0000 Due to large number of modules involved, well planning requires a holistic approach. At the same time, due to complex interaction between the modules and respective physical models, this task implicates a high level of precision. This paper presents a development of an in-house well planning simulator, which integrates all essential well planning modules in a smart way. Central part of the simulator is represented by a trajectory planning and optimization module, which is based on minimization of wellbore length and dogleg severity. Constraints related to anticollision are also included.\u0000 Introduction of smart optimization techniques for wellbore trajectory has a real potential of saving time and efforts by providing engineers with multiple options, which satisfy the aforementioned constraints. Our ultimate goal is to automate wellbore planning to the largest possible extent by developing smart optimizers for other vital modules within the well planning simulator.","PeriodicalId":363084,"journal":{"name":"Volume 10: Petroleum Technology","volume":"91 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114974376","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Automated Iterative Gap Filling Method for Drilling Logs and Other Data Series","authors":"Andrzej T. Tunkiel, D. Sui, T. Wiktorski","doi":"10.1115/omae2021-61927","DOIUrl":"https://doi.org/10.1115/omae2021-61927","url":null,"abstract":"\u0000 Data scientists are facing multiple issues when working with real-life data. Logs are rarely devoid of incorrect values and one of the common categories of data problems is missing values. Gaps in logs are of various shapes, sizes, and quantities, with a plethora of techniques to infill, or restore missing values. No single algorithm will perform best for all scenarios, hence in pursuit of best results exploration of various options is necessary. Furthermore, gap filling in single step may be impossible for certain methods, where gaps exist for multiple attributes. This paper explores an automated iterative approach, where a selection of common algorithms and different input combinations are evaluated on existing data to select the best method based on R2 score. With the ability to perform iterative infilling, where previously imputed data is re-used as training data to patch other gaps, this represents the most automated and universal approach for gap filling in real-life data-series. This paper presents the methodologies and issues behind automated iterative approach to gap filling, and discusses what is necessary to achieve the final goal of high quality, one-click and optimal data infilling.","PeriodicalId":363084,"journal":{"name":"Volume 10: Petroleum Technology","volume":"278 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125732308","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"3D Simulation of Surface Casing Cementing: Dispersion Effects","authors":"RuiZi Zhang, I. Frigaard","doi":"10.1115/omae2021-63338","DOIUrl":"https://doi.org/10.1115/omae2021-63338","url":null,"abstract":"\u0000 Many numerical studies have been conducted regarding laminar miscible displacement flow in narrow, vertical, eccentric annuli. For the next decade it is likely that primary cementing flows on the scale of the well will continue to be simulated predominantly with 2D gap-averaged (2DGA) models. However, 3D simulations are less common due to the computational cost. The comparison between 2D and 3D models needs further attention, to understand the main discrepancies and thus help to understand primary cementing flows better. In this paper, comparisons of 3D against 2DGA model results show a range of interesting different phenomena, e.g. static layers, dispersive spikes, and instabilities. The predictions of the 2DGA model are the same as the 3D results to a degree. In particular, they are consistent with each other regarding the evolving process, interface shape, etc. However, the main difference with the 2DGA concentration arises from dispersion on the scale of the annular gap. From the recent research of Renteria and Frigaard (J. Fluid Mech., vol. 905, 2020) [1], a variety of dispersive effects are the main discrepancy between experiments and 2DGA results as well. We give representative examples of these flows in surface casing geometries and suggest methods for improvement of the 2DGA model.","PeriodicalId":363084,"journal":{"name":"Volume 10: Petroleum Technology","volume":"74 6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127292533","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Machine Learning Approach to Estimate the Diffusion Coefficient of CO2 in Hydrocarbons","authors":"N. Bagalkot, A. Keprate","doi":"10.1115/omae2021-62407","DOIUrl":"https://doi.org/10.1115/omae2021-62407","url":null,"abstract":"\u0000 Diffusion of the gas into the liquids is a critical part in understanding multiphase systems and engineering applications associated with these multiphase systems. The study couples multiphase pendant drop experiments and computational modelling to calculate the CO2 diffusion coefficient in n-decane. Experiments were carried out at a varied range of pressure and temperature 25–45°C and 25–65 bar. During the experiments, the change in the volume of the hydrocarbon drop due to CO2 diffusion was dynamically measured, and numerical model was developed which used the experimental data to estimate the diffusion coefficient. The current study brings in the capability of machine learning as a replacement of the computational part for prediction of the diffusion coefficient of the process. The feasibility of various machine learning models such as Gradient boosting, Gaussian Process Regression (GPR), k-NN, Decision tree etc. are checked. Firstly different algorithms were trained on the dataset and finally evaluated on the test dataset, using various statistical metrics). Finally, the most accurate algorithm is used as a surrogate model for predicting the diffusion coefficient. The chosen ML algorithm was fairly accurate in predicting the diffusion coefficient with a maximum inaccuracy of 7.5%. Therefore, ML may then be employed as an alternative to experiments and numerical methods. A case study is performed to demonstrate the proposed methodology.","PeriodicalId":363084,"journal":{"name":"Volume 10: Petroleum Technology","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130984412","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Buoyant Miscible Jets in the Plug and Abandonment of Oil and Gas Wells","authors":"Hossein Hassanzadeh, A. Eslami, S. Taghavi","doi":"10.1115/omae2021-62654","DOIUrl":"https://doi.org/10.1115/omae2021-62654","url":null,"abstract":"The plug and abandonment (P&A) operation is the final stage in the life cycle of oil and gas wells. The aims of the P&A operation are to seal the well and permanently maintain the well-integrity similar to that of the original natural caprock. Using this approach, it is possible to isolate fluids movement between different strata, to prevent environmental disasters. Generally, the main steps in the P&A operation are (i) accessing the annulus section of the well, (ii) cleaning the defected area, and (iii) placing the cement plug barriers into the target area. To prepare the target area and avoid cement plug contamination, a cleaning process is required inside and outside the casing. The jet cleaning process is one of the effective methods for the cleaning step, in which a liquid of a higher density is usually injected into the target area to displace a lighter ambient fluid. During the jet cleaning process, several forces affect the cleaning efficiency, including inertial, viscous and buoyancy forces. In this work, we analyze a fundamental component of the jet cleaning process in the P&A operation, via experimentally studying the characteristics of a miscible positively buoyant jet. In our work, a heavy fluid is injected downwards into a large rectangular tank filled with a light ambient fluid. Due to the large dimensions of the experimental tank, the wall effects on the flow are neglected, i.e. we consider a free jet. We investigate some of the parameters affecting the behaviour of our positively buoyant jets, such as the injection velocity, the nozzle diameter, and the ratio between the viscosity of the jet fluid to that of the ambient fluid. In the parameter ranges of our interest, the jet flow exhibits certain critical flow features, such as the laminar length (i.e. the initial stable part of the jet where the injection fluid remains laminar and does not mix with the ambient fluid) and the spread angle (i.e. the area occupied by the jet). Our results show that both the laminar length and the spread angle decrease by increasing the injection velocity. In addition, increasing the viscosity ratio results in increasing the maximum laminar length and decreasing the spread angle. These results can help to better design an efficient cleaning in the P&A operation of oil and gas wells.","PeriodicalId":363084,"journal":{"name":"Volume 10: Petroleum Technology","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125418702","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}