2019 6th International Conference on Information Technology, Computer and Electrical Engineering (ICITACEE)最新文献_第3页

Design Of Temperature And Humidity Control Devices In The Leakage Current Test Chamber Of 20 kV Insulator 20kv绝缘子漏电流试验室温湿度控制装置设计

2019 6th International Conference on Information Technology, Computer and Electrical Engineering (ICITACEE) Pub Date : 2019-09-01 DOI: 10.1109/ICITACEE.2019.8904318

Lastoni Wibowo, A. Syakur, T. Andromeda

{"title":"Design Of Temperature And Humidity Control Devices In The Leakage Current Test Chamber Of 20 kV Insulator","authors":"Lastoni Wibowo, A. Syakur, T. Andromeda","doi":"10.1109/ICITACEE.2019.8904318","DOIUrl":"https://doi.org/10.1109/ICITACEE.2019.8904318","url":null,"abstract":"Measurement of the Leakage Current in a Test Chamber needs to be done to find out the durability characteristics of 20kV insulator against high-voltage. Durability of insulating material especially 20 kV insulator was heavily influenced by the state of the environment, particularly the temperature and humidity are very diverse, therefore to obtain accurate test results required a test chamber with temperature and humidity similar to State of the environment. However, the currently test chamber that often used for testing of insulating material does not have temperature and humidity controller so that the test results of electrical materials are not accurate. In this paper, a 20 kV isolator leakage current test chamber is designed with a temperature and humidity regulator applies an on-off control method implanted in Arduino Uno Rev.3 that can condition the test chamber to resemble environmental conditions to obtain accurate test results. In this paper the temperature setting is carried out at three set points namely a maximum temperature of 33 ° C with a minimum humidity of 58%, an average temperature of 27 ° C with an average humidity of 82% and a minimum temperature of 21 ° C with a maximum humidity of 91%. The measurement results show that the maximum temperature setting with minimum humidity obtained the highest temperature measurement results of 33.30 ° C and the lowest humidity of 58.25%. In the average temperature setting with average humidity, the measurement results obtained near the set point, namely the temperature of 27.25 ° C with a humidity of 81.60%. While the minimum temperature setting with maximum humidity obtained the measurement results closest to the set point that is the temperature of 25.35 ° C with a humidity of 91.50%","PeriodicalId":319683,"journal":{"name":"2019 6th International Conference on Information Technology, Computer and Electrical Engineering (ICITACEE)","volume":"53 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125716400","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 2

Augmented Reality Technology As One Of The Media In Therapy For Children With Special Needs 增强现实技术作为特殊需要儿童治疗的媒介之一

2019 6th International Conference on Information Technology, Computer and Electrical Engineering (ICITACEE) Pub Date : 2019-09-01 DOI: 10.1109/ICITACEE.2019.8904132

K. Martono, D. Eridani, Adnan Fauzi, Asri Purwanti, Muhammad Ulil

{"title":"Augmented Reality Technology As One Of The Media In Therapy For Children With Special Needs","authors":"K. Martono, D. Eridani, Adnan Fauzi, Asri Purwanti, Muhammad Ulil","doi":"10.1109/ICITACEE.2019.8904132","DOIUrl":"https://doi.org/10.1109/ICITACEE.2019.8904132","url":null,"abstract":"Learning is a need that must be fulfilled by each human. However, in its development, each human is facing a difference from one to each other. Say, in real life, there are some children with a growth different from the condition in common. The difference in this growth is called with the condition of children with special needs. The existence of children with special needs requires a special treatment. A variety of the methods are used to help children with special needs to growth optimally. The development of computer technology has provided a new breakthrough in helping the children with special needs in improving their motoric ability. One of the breakthroughs used is the development of Medical Rehabilitation Tool by using the augmented reality technology. This technology is able to give a new experience for its user in that the users can directly interact with the virtual objects so as to be able to increase the perception in understanding a form of an object. In this research, the process of testing on the usability of the application to 30 respondents was performed consisting of medical rehabilitation staffs for the speech therapy and occupational therapy. The test on the usability covered the test of Usefulness, Ease of Use, Ease of Learning and Satisfaction. The results of the test from the usefulness aspect showed the result of 81.06%, the aspect of Ease of Use showed the result of 79.13%, the aspect of Ease of Learning showed the result of 78.70% and the aspect of Satisfaction showed the result of 78.40%. With those results obtained, the respondents agreed that the level of usability from the application can help children with special needs to study.","PeriodicalId":319683,"journal":{"name":"2019 6th International Conference on Information Technology, Computer and Electrical Engineering (ICITACEE)","volume":"152 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116113093","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Fast-Charging LTO 18650 Batteries Using a DC PS-3005D Power Supply 使用PS-3005D直流电源快速充电LTO 18650电池

2019 6th International Conference on Information Technology, Computer and Electrical Engineering (ICITACEE) Pub Date : 2019-09-01 DOI: 10.1109/ICITACEE.2019.8904099

Anggakara Syahbi Syagata, I. Setiawan, T. Andromeda, Hermawan, I. Sumpono, A. R. Mat Sidek

引用次数: 0

Dynamic Power Injection for Solar PV Constant Power Generation 太阳能光伏恒功率发电动态注入技术

2019 6th International Conference on Information Technology, Computer and Electrical Engineering (ICITACEE) Pub Date : 2019-09-01 DOI: 10.1109/ICITACEE.2019.8904141

M. Kuncoro, Rudi Darussalam, Chandra B. Sukmono, I. Garniwa

{"title":"Dynamic Power Injection for Solar PV Constant Power Generation","authors":"M. Kuncoro, Rudi Darussalam, Chandra B. Sukmono, I. Garniwa","doi":"10.1109/ICITACEE.2019.8904141","DOIUrl":"https://doi.org/10.1109/ICITACEE.2019.8904141","url":null,"abstract":"The utilization of solar energy for electricity generation is increasing. But, because of the factor of the intermittent irradiance and ambient temperature so that the energy produced fluctuates and unstable. For PV connected to the grid, these power fluctuations affect system stability and frequency. To overcome this problem, several methods for PV power stabilization have been developed. One of them is the Constant Power Generation, where PV output power is limited to a certain power value so it can reduce PV power fluctuations. In this paper, the Dynamic Power Injection method is proposed as modification of the CPG method with energy storage batteries. In principle DPI similar with the CPG method that determines the power limit, but DPI operation include the active power management by charging and discharging action. The battery is using as energy storage when Power PV greater Power limit. On the other hand battery as an energy source for active power injection at Power PV less than Power limit. Thus the output power in each condition can be maintained as Power PV equal with P limit. In this research, DPI modules are built on Arduino controller-based and monitored with the thingspeak webserver. The experimental results of DPI can stabilize PV power fluctuation at it's setting power with an error of 5% and a 15-second time delay.","PeriodicalId":319683,"journal":{"name":"2019 6th International Conference on Information Technology, Computer and Electrical Engineering (ICITACEE)","volume":"64 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126722002","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 3

Understanding Digital Skill Use from The Technology Continuance Theory (TCT) 从技术延续理论(TCT)理解数字技能的使用

2019 6th International Conference on Information Technology, Computer and Electrical Engineering (ICITACEE) Pub Date : 2019-09-01 DOI: 10.1109/ICITACEE.2019.8904176

N. Nurdin, Sagaf S Pettalongi, Mansur Mangasing

{"title":"Understanding Digital Skill Use from The Technology Continuance Theory (TCT)","authors":"N. Nurdin, Sagaf S Pettalongi, Mansur Mangasing","doi":"10.1109/ICITACEE.2019.8904176","DOIUrl":"https://doi.org/10.1109/ICITACEE.2019.8904176","url":null,"abstract":"this paper examines confirmation, perceived usefulness, perceived ease of use affects users satisfaction, which then influences their intention to continue using digital skills in their file. The study was carried out in thirteen Islamic boarding schools (pesantren) involving 120 students selected purposively. Out of 120 questionnaires distributed to the students, there were 112 returned, but 3 of them were not completed. The findings show that the Islamic boarding school students' continuance intention to use the digital skill in their daily life is strongly affected by their satisfaction towards the skills. However, their satisfaction was generated from confirmation of expectation, perceived usefulness, and perceived ease of various digital skills obtained from the training provided by an Islamic educational institution. Our finding highlight that Islamic education institution and government should familiarize the use of digital skill in Islamic boarding school context to support Muslim students involvement in digital economy activities in the future.","PeriodicalId":319683,"journal":{"name":"2019 6th International Conference on Information Technology, Computer and Electrical Engineering (ICITACEE)","volume":"114 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132259311","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 10

Designing a Fuzzy Controller of Crude Oil Dilution in Palm Oil Mills 棕榈油厂原油稀释模糊控制器的设计

2019 6th International Conference on Information Technology, Computer and Electrical Engineering (ICITACEE) Pub Date : 2019-09-01 DOI: 10.1109/ICITACEE.2019.8904443

E. W. Sinuraya, Denis, O. S. Siregar, Risdiyanto Ginting

引用次数: 0

Design and Construction of Helical Antenna in GSM 900 GSM 900中螺旋天线的设计与构造

2019 6th International Conference on Information Technology, Computer and Electrical Engineering (ICITACEE) Pub Date : 2019-09-01 DOI: 10.1109/ICITACEE.2019.8904410

Y. Christyono, Ardi Yunianto

引用次数: 0

MEC Deployment with Distributed Cloud in 4G Network for 5G Success MEC部署与分布式云在4G网络中为5G成功

2019 6th International Conference on Information Technology, Computer and Electrical Engineering (ICITACEE) Pub Date : 2019-09-01 DOI: 10.1109/ICITACEE.2019.8904270

Andika Hairuman, Amalia Zahra, Gede Putra Kusuma, D. F. Murad

引用次数: 4

Spark Gap System of Electrical Discharge Machining (EDM) 电火花加工火花间隙系统

2019 6th International Conference on Information Technology, Computer and Electrical Engineering (ICITACEE) Pub Date : 2019-09-01 DOI: 10.1109/ICITACEE.2019.8904107

B. Nugroho, A. Yahya, A. R. Mat Sidek, T. Andromeda, N. Khamis

引用次数: 0

Analysis of the Effect of the Wax Coating on Firmness Prediction Model in Malang Apples Based on Visible and Near-Infrared (VNIR) Imaging 基于可见光和近红外(VNIR)成像技术的蜡涂层对麻郎苹果硬度预测模型的影响分析

2019 6th International Conference on Information Technology, Computer and Electrical Engineering (ICITACEE) Pub Date : 2019-09-01 DOI: 10.1109/ICITACEE.2019.8904139

Risti Putri, A. H. Saputro

{"title":"Analysis of the Effect of the Wax Coating on Firmness Prediction Model in Malang Apples Based on Visible and Near-Infrared (VNIR) Imaging","authors":"Risti Putri, A. H. Saputro","doi":"10.1109/ICITACEE.2019.8904139","DOIUrl":"https://doi.org/10.1109/ICITACEE.2019.8904139","url":null,"abstract":"Nowadays, wax-coated fruits to reduce respiration rate, maintain firmness, and postpone fruit ripening. Usually, the instrument that used to measure the quality of waxed fruit was destructive. The quality measurement of the fruits using Visible and Near-Infrared (VNIR) imaging has been studied. But, the quality measurement of the waxed fruits with VNIR imaging had never been done before. In this study, the effect of the wax coating on the firmness prediction model of Malang apples was further analyzed. The object that used was Rome Beauty variety of Malang apples. Beeswax was used to coat the Malang apples. Images were recorded using reflectance mode. Images were processed using several methods such as image correction, selection of Region of Interest (ROI), feature extraction, feature selection, and regression model. Regression Tree (RT) used as a feature selection and regression model algorithm. In this study, a regression model was built using non-waxed Malang apples. Next, the waxed Malang apples were tested with firmness prediction model of the non-waxed Malang apples. The evaluation parameters that used to evaluate the model were Root Mean Square Error (RMSE), determination coefficient $(mathrm{R}^{2})$, and Residual Predictive Deviation (RPD). Prediction results for non-waxed Malang apples were 0.88 for $mathrm{R}^{2}$, 6.65 for RMSE and 2.11 for RPD. Test results for waxed Malang apples to firmness prediction model of non-waxed Malang apples were 0.3 for $mathrm{R}^{2}$, 16.8 for RMSE, and 0.85 for RPD. Based on these results, the wax coating on the surface of the fruits could disrupt the measurement results of VNIR imaging.","PeriodicalId":319683,"journal":{"name":"2019 6th International Conference on Information Technology, Computer and Electrical Engineering (ICITACEE)","volume":"90 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131425806","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0