{"title":"Determination of the Accumulated Location of Microparticle Collection Caused by AC EO","authors":"Hukun Yang, Hongyuan Jiang, Hui Yan, C. Ma","doi":"10.1109/ICIEA.2007.4318409","DOIUrl":"https://doi.org/10.1109/ICIEA.2007.4318409","url":null,"abstract":"AC electroosmosis (AC EO) shows many advantages in collecting microparticles, such as low signal voltage, little sample, real-time detection and integrating in microchip easily. An experiment showed that the microparticles in sample would be accumulated on a fixed field on the surface of the microelectrodes caused by the AC electric field. Based on the phenomena, the velocity field of AC EO in microchannel is explored and the process of microparticles accumulated is explained. The location of microparticles accumulated is determined based on the numerical simulation results, at the same time, the rate relation between the accumulated location and the width of microelectrode, which offers the theoretic base for further analyzing and detecting microparticles.","PeriodicalId":231682,"journal":{"name":"2007 2nd IEEE Conference on Industrial Electronics and Applications","volume":"51 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2007-05-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130965161","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Torque Ripple Minimization in Switched Reluctance Motor Based on BP Neural Network","authors":"Yan Cai, Chao Gao","doi":"10.1109/ICIEA.2007.4318597","DOIUrl":"https://doi.org/10.1109/ICIEA.2007.4318597","url":null,"abstract":"The instantaneous torque control for torque ripple minimization of switched reluctance motor (SRM) by BP neural network is presented. As SRM has a highly nonlinear characteristics, neural network is well suited for its control. After static torque characteristics of SRM having been measured, the torque model and the inverse torque model are developed based on BP neural network of Levenberg-Marquardt algorithm. The torque ripple minimization can be achieved by optimum profiling of the phase current based on instantaneous torque control. An efficient commutation strategy for minimizing torque ripple as well as avoiding power converter voltage saturation over a wide speed range of operation is proposed. Simulation results verify the feasibility of this torque ripple minimization technique.","PeriodicalId":231682,"journal":{"name":"2007 2nd IEEE Conference on Industrial Electronics and Applications","volume":"17 21","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2007-05-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132914017","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Agile Design System Development for Switch Cabinet","authors":"Z. Xiaosong, L. Fei","doi":"10.1109/ICIEA.2007.4318695","DOIUrl":"https://doi.org/10.1109/ICIEA.2007.4318695","url":null,"abstract":"This paper aimed at the difference of product structures between high and low voltage switch cabinet, illustrates a switch cabinet agile design system. Different design models are used according to the character of the high-low voltage switch cabinet products. The design platform for mid-high voltage products is established by customizing Solidworks software. It can assist design staff in choosing proper standard design scheme according to customer's demand, drive 3D CAD products module automatically with desiring configuration, and create bill of material automatically. While the low voltage products design is completed by visualizing and module design technology. It can select standard modules and combine together to meet customer's needs automatically. It also can create bill of material automatically.","PeriodicalId":231682,"journal":{"name":"2007 2nd IEEE Conference on Industrial Electronics and Applications","volume":"14 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2007-05-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133314033","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Lyapunov-based Large Signal Stable Control for Coupled-inductor Sepic Converter","authors":"Yongping Zhang, Bo Zhang, D. Qiu","doi":"10.1109/ICIEA.2007.4318606","DOIUrl":"https://doi.org/10.1109/ICIEA.2007.4318606","url":null,"abstract":"In order to obtain the large signal stable control strategy of high-order system, Lyapunov direct method is applied to coupled-inductor Sepic converter for the first time. Extended system of differential equation of Sepic converter is proposed in this paper. Based on Lyapunov stability theory, Lyapunov function is constructed successfully and a globally asymptotic stable control law is obtained. The proposed controller is robustness around the operating point, and good performance of transient responses can be achieved at load changes and input voltage variations. Simulation results confirm the effectiveness of the proposed control law.","PeriodicalId":231682,"journal":{"name":"2007 2nd IEEE Conference on Industrial Electronics and Applications","volume":"19 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2007-05-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133457908","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Optimal Efficiency Control of Linear Induction Motor Drive for Linear Metro","authors":"Jianqiang Liu, F. Lin, Zhongping Yang, T. Zheng","doi":"10.1109/ICIEA.2007.4318756","DOIUrl":"https://doi.org/10.1109/ICIEA.2007.4318756","url":null,"abstract":"In this paper, a new approach is proposed that minimizes the total copper and iron losses in variable speed and/or thrust force linear induction motor (LIM) drive. This method is based on a LIM model that considering the end effect and attraction force. For a given speed and load this model allows the establishment of equations to quantify copper and iron losses, and the relationship between stator field and torque currents for minimum total loss can be deduced. Based on these equations, a loss minimization control algorithm, combined with vector control mode to drive the LIM, is proposed. This algorithm allows the electromagnetic losses in a variable speed and thrust force LIM drive to be decreased while keeping a good dynamic response. The simulated results presented show that it is possible to improve the efficiency of LIM drive keeping a good dynamic response.","PeriodicalId":231682,"journal":{"name":"2007 2nd IEEE Conference on Industrial Electronics and Applications","volume":"67 3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2007-05-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133671387","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Performance Investigation of IEEE802.11e EDCA under Non-saturation Condition based on the M/G/1/K Model","authors":"Bai Xiang, Mao Yu-ming, Xie Jun","doi":"10.1109/ICIEA.2007.4318419","DOIUrl":"https://doi.org/10.1109/ICIEA.2007.4318419","url":null,"abstract":"The IEEE 802.11e network provides different with QoS (quality of service) guarantee for different traffic streams. The enhanced distributed channel access (EDCA) in IEEE 802.11e MAC protocol is proposed to support prioritized QoS on the basis of the distributed coordination function (DCF) in IEEE 802.11. We first build a new Markov chain model for the EDCA. The model takes into account both the idle state that represents that there are no packets to be transmitted and differentiation based on different AIFS-value for different traffic. We can use the signal transfer function of the generalized state transition diagram to derive a probability distribution of the MAC layer service time and analyze the performance of EDCA from a non-saturated channel to a saturated medium by using M/G/1/K queuing model. The proposed model is calculated numerically and validated against simulation results, we observed a good match between the analytical model and simulation which conforms the veracity of proposed model. Simulation and theoretical results show that despite providing prioritized QoS, the EDCA still can not support strict QoS for real-time application like voice and video unless network works in the non-saturation case. On the other hand, it is inevitable that there is unfairness of channel access to prioritized traffic due to EDCA.","PeriodicalId":231682,"journal":{"name":"2007 2nd IEEE Conference on Industrial Electronics and Applications","volume":"47 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2007-05-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132185499","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Yujie Zhao, Qingli Wang, Jinxue Xu, Chengyuan Wang
{"title":"A Fuzzy Sliding Mode Control Based on Model Reference Adaptive Control for Permanent Magnet Synchronous Linear Motor","authors":"Yujie Zhao, Qingli Wang, Jinxue Xu, Chengyuan Wang","doi":"10.1109/ICIEA.2007.4318554","DOIUrl":"https://doi.org/10.1109/ICIEA.2007.4318554","url":null,"abstract":"In order to meet the demands of high-acceleration/high-deceleration and high-precision motion control system, the direct-drive linear motor as the prime motion actuator is widely used in modern motion control systems such as machine tools, ranging from mass transportation to factory automation etc. Among these applications, permanent magnet synchronous linear motor (PMSLM) owing to their simple structure, easy of manufacture and simple control are more frequently used. The advantage of using PMSLM is that it can provide high performance motions with reduced mechanical components, but unlike conventional ball-crew drive, the PMSLM system eliminates the mechanical coupling, rotary-to-linear translators, and reduction gears. Therefore, any change or disturbance in the load will be directly reflected back to the motor and control system, which will cause large deterioration in motion control. In this paper, the model of PMSLM is established firstly; Secondly, a fuzzy sliding mode control based on model reference adaptive control (MRAC) for permanent magnet synchronous linear motor (PMSLM) system, which combines the merits of MRAC, the sliding-mode control and the fuzzy inference mechanism, is proposed. In order to reduce the complex identification of MRAC, the sliding mode control (SMC) is employed in the controller design, which makes the response of the PMSLM system can strictly track the reference mode, and is less sensitive to external load disturbance and the system uncertainties. The introduction of fuzzy control effectively minimized the chattering of SMC. At last, the result of simulation using proposed method is illustrated, which illuminate the proposed method has good tracking characteristic and strong robustness for external load disturbance and the system uncertainty.","PeriodicalId":231682,"journal":{"name":"2007 2nd IEEE Conference on Industrial Electronics and Applications","volume":"45 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2007-05-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132646689","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Reconstruction of Ridgelet Coefficients Using Total Variation Minimization","authors":"Deng Chengzhi, Cao Han-qiang, W. Shengqian","doi":"10.1109/ICIEA.2007.4318843","DOIUrl":"https://doi.org/10.1109/ICIEA.2007.4318843","url":null,"abstract":"The combination of ordinary wavelet shrinkage with total variation minimization was successfully applied. In this paper, we apply the technique with respect to ridgelet coefficients. Firstly, a translation-invariant ridgelet transform is proposed. And then, an image denoising algorithm, based on ridgelet shrinkage and total variation minimization, is given. This algorithm preserves the important information of image and reduces the noise by thresholding small ridgelet coefficients. By replacing these thresholded coefficients by values minimizing the total variation, the algorithm reduces the pseudo-Gibbs artifacts. Experiment results show that this algorithm yields significantly superior image quality and higher peak signal to noise ratio (PSNR).","PeriodicalId":231682,"journal":{"name":"2007 2nd IEEE Conference on Industrial Electronics and Applications","volume":"208 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2007-05-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133138130","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Navigation and Positioning System Based on GPS & CDMA","authors":"Qu Congshan, Xu Hualong, Tan Ying","doi":"10.1109/ICIEA.2007.4318931","DOIUrl":"https://doi.org/10.1109/ICIEA.2007.4318931","url":null,"abstract":"Global Positioning System (GPS) is widely used in system positioning or navigation communication, and code division multiple access (CDMA) is applied in personal communication and data transmission etc. In this paper, the data format of short message data in CDMA and the data format about GPS data stream are introduced in brief, and then a GPS and CDMA application system based on embedded Linux operating system is researched in position navigation, remote control, data transmission and personal communication. Finally the hardware design scheme and the application program flow scheme are given. All application programs are designed under embedded Qt platform and embedded Linux.","PeriodicalId":231682,"journal":{"name":"2007 2nd IEEE Conference on Industrial Electronics and Applications","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2007-05-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131306798","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Wang Dazhi, Yang Jie, Yang Qing, Wu Dongsheng, Jin Hui
{"title":"Estimation and Control of Hybrid Electric Vehicle using Artificial Neural Networks","authors":"Wang Dazhi, Yang Jie, Yang Qing, Wu Dongsheng, Jin Hui","doi":"10.1109/ICIEA.2007.4318365","DOIUrl":"https://doi.org/10.1109/ICIEA.2007.4318365","url":null,"abstract":"This paper proposes a hybrid adaptive control strategy to control a hybrid electric vehicle (HEV), and two neural-network-based adaptive estimators of torque and speed, which are of both induction motor (IM) and engine, are proposed too. In order to control HEV effectively, the configuration of the hybrid control system combines a fuzzy neural network (FNN) controller and an adaptive compensated controller. The FNN controller is the main controller to track the expected value of the system; and the compensated controller to compensate the uncertainties of the system; the compensated control law is derived using Lyapunov stability theory. The proposed estimator of IM includes two recurrent neural networks (RNN), one is used to estimate rotor flux and speed, the other is used to estimate stator current. The effectiveness of the proposed control strategy is verified by the simulation results.","PeriodicalId":231682,"journal":{"name":"2007 2nd IEEE Conference on Industrial Electronics and Applications","volume":"96 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2007-05-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133790540","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}