2018 International Conference on Computing, Engineering, and Design (ICCED)最新文献

Classification and Advantages Parallel Computing in Process Computation: A Systematic Literature Review 并行计算在过程计算中的分类和优势:系统的文献综述

2018 International Conference on Computing, Engineering, and Design (ICCED) Pub Date : 2018-09-01 DOI: 10.1109/ICCED.2018.00036

Erick Fernando, D. F. Murad, B. Wijanarko

{"title":"Classification and Advantages Parallel Computing in Process Computation: A Systematic Literature Review","authors":"Erick Fernando, D. F. Murad, B. Wijanarko","doi":"10.1109/ICCED.2018.00036","DOIUrl":"https://doi.org/10.1109/ICCED.2018.00036","url":null,"abstract":"Data Management requires computing devices that can perform data processes to form better information. With the development of data, the processor can be done with one unit only, over time required computing devices that have high performance. Parallel Computing is one of the techniques of doing computing simultaneously by utilizing several independent computers simultaneously. Parallel computers can be grouped according to the level at which hardware supports parallelism. This classification is generally analogous to the distance between basic computing nodes. This research will focus on looking at the widely used classification trends in this parallelism that affect the performance of these calculations. This study uses a systematic literature review to find many classifications in parallel computing. literature is taken from a reputable journal database is ACM Digital Library, IEEE Xplore Digital Library, Science Direct, Emerald Insight. The results of this study are mostly conducted in the United States and China so as to provide many contributions. classification of parallelism, mostly done in parallel computing include Distributed Parallel, Multi-Core Processor, Massively Parallel Computing, and Graph Processing Unit (GPU). In this study also illustrates the advantages in the application of computer parallel based on its classification. In essence the advantages in the application of computer parallel improve performance performance, as well as effective and efficiency in a process that is done","PeriodicalId":166437,"journal":{"name":"2018 International Conference on Computing, Engineering, and Design (ICCED)","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114976038","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 3

Measurement of Accessibility Index Using Gravity Model Based on GIS in Sukabumi District 基于GIS的水滨区重力模型可达性指数测量

2018 International Conference on Computing, Engineering, and Design (ICCED) Pub Date : 2018-09-01 DOI: 10.1109/ICCED.2018.00054

H. Basri, Bambang Jatmika, Z. Arifin, S. Sundari, Apriliana, Budi Barkah, Hermanto

{"title":"Measurement of Accessibility Index Using Gravity Model Based on GIS in Sukabumi District","authors":"H. Basri, Bambang Jatmika, Z. Arifin, S. Sundari, Apriliana, Budi Barkah, Hermanto","doi":"10.1109/ICCED.2018.00054","DOIUrl":"https://doi.org/10.1109/ICCED.2018.00054","url":null,"abstract":"Accessibility is a concept that combines the geographical land use with transportation network connecting system. Broadly speaking, this study aims to determine the accessibility index in Sukabumi district road network using the parameter range, running time, and travel time, and the depiction of the accessibility index with geographic information systems. To find out how much accessibility index in a region should be the measurement of accessibility. One is by gravity models using a parameter distance and time (running time and travel time). This accessibility calculation method based on region, which consists of 11 zones (regions) that Cicurug zone, Cidahu zone, Ciambar zone, Parungkuda zone, Kabandungan zone, Parakan salak zone, Bojong Genteng zone, Kalapa Nunggal zone, Cibadak zone, Nagrak zone, Cikidang zone. Cibadak sub-district has a high accessibility index is equal to 1.00 and sub Kalapa Nunggal have the lowest accessibility index is equal to 0.00. The method used is a direct measurement tool to the field with a stopwatch and a motorcycle. Measurements were performed in conditions of heavy traffic and traffic that is empty then take an average.","PeriodicalId":166437,"journal":{"name":"2018 International Conference on Computing, Engineering, and Design (ICCED)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129291570","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 4

Comparison of Classification Data Mining in Process Majors Students 过程类专业学生分类数据挖掘的比较

2018 International Conference on Computing, Engineering, and Design (ICCED) Pub Date : 2018-09-01 DOI: 10.1109/ICCED.2018.00033

D. Gustian, A. Rahmawati, Titin, Rian Rama Putra, Putri Anisa

{"title":"Comparison of Classification Data Mining in Process Majors Students","authors":"D. Gustian, A. Rahmawati, Titin, Rian Rama Putra, Putri Anisa","doi":"10.1109/ICCED.2018.00033","DOIUrl":"https://doi.org/10.1109/ICCED.2018.00033","url":null,"abstract":"The process of admission of new students, especially in vocational school is the first step of school in selecting the prospective students in accordance with the chosen majors. But sometimes the selection of majors becomes boomerang for the students because after received in the department, they fail in the process of studying such as not match with the chosen majors when he has obtained the lessons, students learning interest is reduced so that the values of academic achievement decrease and if the student graduate, the student will find difficulty in finding a job that suits for their interests, even to the drop out. This is certainly a major problem for school management in maintaining these students and it impacts on the costs of education that have been issued, either by parents or by the government who subsidize the school to be useless, because the students do not have sufficient ability for the chosen majors. This study conducted a comparison of several methods of data mining classification in order to obtain the best accuracy value in the process of data training, testing and validation. This research can provide solution on the best classification method in the selection of majors, so it can be used as a reference in choosing the best method and suitable in similar cases, which will result in the students majors to be more accurate. So as to contribute to the school can make an appropriate decision to determine the students majors in accordance with the interests and talents of each student, thus minimizing students wrong in determining the majors that can result directly with the academic achievement of the student. The results obtained that KNN and ID3 method tops in accuracy of both data testing and validation with a value of 100%, C4.5 about 98.61% and 100%, Naïve Bayes 99.31% and 96.45% and the last Random Forest 92.36% and 89.92%. Software Quality Assurance obtained the value of 80. This means that the application is used to assist the management of majors.","PeriodicalId":166437,"journal":{"name":"2018 International Conference on Computing, Engineering, and Design (ICCED)","volume":"41 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129426648","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 5

Optimizing the V Flow Model on the Belt Conveyor in Getting the Optimal Coal Flow Rate with CFD Method 用CFD方法优化带式输送机V型流模型求解最优煤流量

2018 International Conference on Computing, Engineering, and Design (ICCED) Pub Date : 2018-09-01 DOI: 10.1109/ICCED.2018.00013

Y. Nata, Y. Mulyana, Oscar Haris, Usup, M. Hidayat

{"title":"Optimizing the V Flow Model on the Belt Conveyor in Getting the Optimal Coal Flow Rate with CFD Method","authors":"Y. Nata, Y. Mulyana, Oscar Haris, Usup, M. Hidayat","doi":"10.1109/ICCED.2018.00013","DOIUrl":"https://doi.org/10.1109/ICCED.2018.00013","url":null,"abstract":"In the past, to find out the performance of a component in the system was difficult to do, because of the parameters and needed a large time and cost [1]. With the development of technology on computers today there is a lot of software that can be used to repair and repair components[2]. The use of V Plow is most applied in belt conveyor transportation systems in power plants with coal fuel. Where the function of the V plow is as a coal plow divider in the conveyor belt before entering the inlet chute. The case that happens a lot inside is what is scattered around the inlet chute, which caused uneven plow rate when passing V plow. This research was conducted to provide the right solution in the construction process of V Plow. By using CFD, we can simulate the flow rate of coal when passing V Plow, you can find out the most optimal forms to produce uniform plows. Computational Fluid Dynamics (CFD) has been successfully applied to evaluate potential dust emissions from bulk material transfer chutes[3]. The implementation of appropriate models and modelling parameters is shown to be critical to the overall accuracy of the simulation results. In this study is the relationship between wide and long angles between V Plow diverter and cleaning of conveyor belts in the conditions of 2 (two) dimensions. The results of this study indicate that V Plow is a diverter with a large opening angle and Plow plate whose length produces optimal plows. This research is expected to be a reference for the application of V Plow in the field, especially in industries that use V Plow and Belt Conveyor as a means to the transportation of raw materials.","PeriodicalId":166437,"journal":{"name":"2018 International Conference on Computing, Engineering, and Design (ICCED)","volume":"9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132061655","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1

Measurement and Modeling of Infiltration Rate at Campus Area-University of Nusa Putra, Sukabumi 校园区域入渗速率的测量与模拟-努沙普特拉大学，苏卡umi

2018 International Conference on Computing, Engineering, and Design (ICCED) Pub Date : 2018-09-01 DOI: 10.1109/ICCED.2018.00029

D. T, Iqbal Sadam Mustakim, Eka Nurachman, Lyisa Nurpaidah, Randi Ferdiansah, M. Ammar, Rida I. Sitepu

引用次数: 0

Integration Dual Channel Supply Chain with Permissible Delay in Payment & Delay of Online Product Launch Considerations 允许延迟付款的集成双渠道供应链&在线产品发布延迟的考虑

2018 International Conference on Computing, Engineering, and Design (ICCED) Pub Date : 2018-09-01 DOI: 10.1109/ICCED.2018.00043

M. Ibrahim

引用次数: 2

A Novel System Solution for Crowd Supervision 一种新的人群监控系统解决方案

2018 International Conference on Computing, Engineering, and Design (ICCED) Pub Date : 2018-09-01 DOI: 10.1109/icced.2018.00046

Xiaolong Ma, B. Gao, Zhi-guo Jiang, Jianjun Chen

引用次数: 0

Estimates of Material Need on Houses Construction Using Regression Model Program 用回归模型估算房屋建筑材料需求

2018 International Conference on Computing, Engineering, and Design (ICCED) Pub Date : 2018-09-01 DOI: 10.1109/ICCED.2018.00027

Paikun, Muhammad Kahpi, Rina Krisnawati, Andri Agustian, Randi Rohimat, Jasmansyah

{"title":"Estimates of Material Need on Houses Construction Using Regression Model Program","authors":"Paikun, Muhammad Kahpi, Rina Krisnawati, Andri Agustian, Randi Rohimat, Jasmansyah","doi":"10.1109/ICCED.2018.00027","DOIUrl":"https://doi.org/10.1109/ICCED.2018.00027","url":null,"abstract":"Knowing the material needs of house construction project is very important to anticipate the shortcomings or excess material that cause disadvantages to the contractor. However, it is difficult to realize if the bill of quantity is not available. Even, bill of quantity can be arranged after completing data support. To find out the material needs of a building, data is needed and must have been compiled a bill of quantity. How can I know the material requirements when the data is very limited? The Program Model is the right solution to overcome the problem on material needs in house construction projects. To obtain a model, then the model compile it into a program, and find out the material needs of a house construction project, it is very urgent to conduct a research. This study used a quantitative descriptive approach. The data used were primary data and secondary data. Primary data and secondary data of this study were project documents. The data were processed then analyzed using regression method to get a model. The model that had been obtained then processed into a program to estimate the material needs of the house construction projects. This research brought in a model program which used to estimate the material needs of a simple house construction project with only building area input data. By using this program, it can be known all the material needs in a house construction. Easy, fast and practical.","PeriodicalId":166437,"journal":{"name":"2018 International Conference on Computing, Engineering, and Design (ICCED)","volume":"127 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124219866","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 4

An Energy Efficient Data Gathering for Wireless Sensor Networks 无线传感器网络的高能效数据采集

2018 International Conference on Computing, Engineering, and Design (ICCED) Pub Date : 2018-09-01 DOI: 10.1109/ICCED.2018.00038

A. Alkalbani, T. Mantoro

引用次数: 0

Transactional Test Environment for Faster and Early Verification of Digital Designs 事务性测试环境，更快，更早地验证数字设计

2018 International Conference on Computing, Engineering, and Design (ICCED) Pub Date : 2018-09-01 DOI: 10.1109/ICCED.2018.00037

R. K. Kakani, A. Darji

{"title":"Transactional Test Environment for Faster and Early Verification of Digital Designs","authors":"R. K. Kakani, A. Darji","doi":"10.1109/ICCED.2018.00037","DOIUrl":"https://doi.org/10.1109/ICCED.2018.00037","url":null,"abstract":"while verifying any digital design, it is very important to think about a feature or an issue in that design at the appropriate level of abstraction for getting better verification productivity. This is done by creating the environment to be capable enough to verify the design at all these abstraction levels. Although the interfaces of Design under Test (DUT) ultimately are represented by pin level activity, it is important and useful to maintain most of the verification tasks, like the stimuli generation and data collection, at the transaction level. This work concentrates on creation of a transaction level verification environment similar to the Universal Verification Methodology (UVM), which provides a set of communication channels to connect the components at transaction level using Transaction level Modelling (TLM) interfaces. The methodology described in this work provides a novel way for partitioning the environment and reducing the maintenance of low-level code through auto generation of synthesizable collectors and drivers as well as the first level code for the Bus Functional Models (BFM) and monitors in the test environment. These low-level components are developed to be robust enough to accept the stimuli from a variety of sources to the same agents and keeping the environment mostly independent of the mode of use. The simulation dump for transactions is stored and used as a stimuli to the same agents used during the simulation in the absence of DUT, this replay mode reduces the turnaround time for building the verification collaterals significantly. A case study on verifying a processor sleep handling logic like the sleep walking logics for Memory controller units being implemented these days, is done in this described environment to observe significant improvement in simulation time and verification collateral development.","PeriodicalId":166437,"journal":{"name":"2018 International Conference on Computing, Engineering, and Design (ICCED)","volume":"151 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117352237","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1