Journal of Achievements in Materials and Manufacturing Engineering最新文献

{"title":"Effect of heat treatment on microhardness of electroless Ni-YSZ cermet coating","authors":"N. Bahiyah Baba, A. S. Ghazali, A. A. Abdul Rahman, S. Sharif","doi":"10.5604/01.3001.0016.0940","DOIUrl":"https://doi.org/10.5604/01.3001.0016.0940","url":null,"abstract":"The paper discussed the effect of heat treatment on electroless nickel-yttria-stabilised zirconia (Ni-YSZ) cermet coating. Ni-YSZ cermet coating has potential applications such as cutting tools, thermal barriers, solid oxide fuel anode, and various others. The compatibility of ceramic YSZ and metallic nickel in terms of the mechanical properties such as hardness by varying the heating temperature, time and ceramic particle size is highlighted.\u0000\u0000Ni-YSZ cermet coating was deposited onto a high-speed steel substrate using the electroless nickel co-deposition method. The temperature and time were varied in a range of 300-400°C and 1-2 hours, respectively. The microhardness measurements were carried out using a Vickers microhardness tester (Shimadzu) according to ISO 6507-4. The surface characterisation of the cermet coating was carried out using JOEL Scanning Electron Microscope (SEM) coupled with Energy Dispersive X-ray (EDX) JSM 7800F. The crystallographic structure of materials was analysed by X-ray diffraction (XRD) Bruker D8 Advance instrument.\u0000\u0000It was found that the microhardness of Ni-YSZ cermet coating with the ratio of 70:30, respectively, is directly proportional to the heating temperature and time. Heating the Ni-YSZ cermet coating at 300°C from room temperature (rtp) to 1 hour shows a 12% microhardness increment, while from 1 to 2 hours gives a 19% increment. Compared to heating at 350°C and 400°C, the increment is more significant at 33% and 49% for rtp to 1 hour and 8% and 16% for 1 to 2 hours, respectively. In addition, the effect of varying YSZ particle size in the Ni-YSZ cermet gave response differently for heating temperature and heating time.\u0000\u0000The paper is only limited to the discussion of the heat treatment effect on Ni-YSZ cermet coating hardness property. The tribological effect will be in future work.\u0000\u0000The microhardness data may vary due to the Vickers microhardness force applied and the amount of ceramic particle incorporation and phosphorus content in the nickel matrix.\u0000\u0000The value of this work is the compatibility of the ceramic YSZ and metallic nickel matrix in terms of mechanical properties, such as hardness, upon heat treatment.\u0000\u0000","PeriodicalId":14825,"journal":{"name":"Journal of Achievements in Materials and Manufacturing Engineering","volume":"25 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90356711","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"FEM numerical simulation of contact stresses between driving shaft and hub impeller of fuel pump","authors":"M. Wiater, G. Chladek, J. Żmudzki","doi":"10.5604/01.3001.0016.0941","DOIUrl":"https://doi.org/10.5604/01.3001.0016.0941","url":null,"abstract":"The aim of the work was to test the contact stresses in the model system of the turbine hub cooperating with the fuel pump drive shaft. The hypothesis of the work was that, by means of FEA, it is possible to assess the contact stresses in the materials of the turbine hub and the fuel pump shaft during torque transmission.\u0000\u0000A turbine with fibre-reinforced polyphenylene sulphide (PPS) composite cooperating with a stainless steel shaft (X46Cr13/1.4034) in a commonly used D-flat shape joint was selected for the experimental research. To assess contact stresses, the CAD model (NX, Siemens) of the entire turbine was limited to the hub area. The drive shaft is supported in accordance with the bearing in the fuel pump, and the possibility of rotation about the axis along the length of the torque-producing magnet is taken away. The system was loaded with a torque of 200 Nmm on the turbine. The turbine hub and shaft were calculated, taking into account the phenomenon of contact detachment or slip at the value of the friction coefficient of 0.1.\u0000\u0000The pressure transmission area was found in the area at the edge of the flat surface D-flat and on the opposite side of the D-convexity. The contact stresses on the D-flat side reached values close to the composite strength.\u0000\u0000The studies did not take into account the technological inaccuracies, thermal deformation, local material properties, and wear. The value of the friction coefficient was not measured in realistic conditions with fuel lubrication.\u0000\u0000FEA has been achieved, which allows to reduce the cost of experimental research.\u0000\u0000The proposed model allows for further studies of the influence of elasticity of various materials and structures on contact stresses in order to assess wear resistance.\u0000\u0000","PeriodicalId":14825,"journal":{"name":"Journal of Achievements in Materials and Manufacturing Engineering","volume":"1 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74834621","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Biological synthesis and characterization of titanium dioxide nanoparticle from Cynodon dactylon","authors":"R. E. Renitta, T. Jebaseeli, A. Dhanaraj, Sujay Paul","doi":"10.5604/01.3001.0016.0952","DOIUrl":"https://doi.org/10.5604/01.3001.0016.0952","url":null,"abstract":"There are several advantages of using a biological technique to produce nanoparticles versus a chemical method. The primary goal of this work is to characterize and biologically synthesize titanium dioxide (TiO2) nanoparticles from Cynodon dactylon. The characterization has experimented with UV-Vis Spectroscopy, EDX analysis, SEM, XRD, and FTIR.\u0000\u0000The suggested study uses a simple biological technique to accomplish the systematic biological synthesis of TiO2 nanoparticles utilizing Cynodon dactylon plant extract and titanium tetra isopropoxide as a precursor. UV-Vis spectroscopy, Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and X-Ray Diffraction (XRD) are used to confirm the fabrication of the TiO2 nanoparticles. The plant extract as well as titanium-based nanoparticles of the herb, Cynodon dactylon will be tested for its antibacterial activity against human pathogens. This eco-friendly technique for nanoparticle synthesis is straightforward and adaptable to major commercial manufacturing and technological applications.\u0000\u0000Cynodon dactylon biosynthesis of TiO2 nanoparticles is efficient, nutrition dependent, does not employ hazardous compounds, and happens at neutral pH levels. The antibacterial study results show that TiO2 nanoparticles synthesized using Cynodon dactylon have good antibacterial properties. TiO2 nanoparticle method of action against bacteria is unknown. This is an alternative process for synthesising TiO2 nanoparticles, apart from other chemical protocols, since this is quick and non-toxic. The antimicrobial property of biologically synthesized TiO2 nanoparticles against Escherichia coli, Staphylococcus aureus, and Acinetobacter baumannii was tested at four different doses of 15 µl/mg, 25 µl/mg, 50 µl/mg, and 75 µl/mg. The present results revealed the 75 µl/mg concentration got the highest zone of inhibition (15, 13, 15 mm) for Acinetobacter baumannii, Staphylococcus aureus, and Escherichia coli.\u0000\u0000Many nanoparticles smaller than 100 nm are firmly agglomerated with each other in the study. TiO2 nanoparticles absorb in the UV region of 200 to 400 nm. XRD measurements confirmed the presence of TiO2 nanoparticles in the biologically produced sample. In our work, EDX was used to confirm the existence of Ti after its synthesis by Cynodon dactylon.\u0000\u0000The biosynthesized TiO2 nanoparticles utilizing Cynodon dactylon plant extracts exhibit a good potent antibacterial activity. The proposed results showed that the TiO2 nanoparticles are well suited for biomedical applications.\u0000\u0000The suggested research identifies several eco-friendly, biological, and cost-effective procedures for manufacturing nano-coated herbal products. The agar well diffusion technique was used to assess antibacterial activities toward test pathogens such as Acinetobacter baumannii, Staphylococcus aureus, and Escherichia coli.\u0000\u0000","PeriodicalId":14825,"journal":{"name":"Journal of Achievements in Materials and Manufacturing Engineering","volume":"31 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81046593","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Development of system of automated protection of employees from COVID-19 and other infections at the enterprise","authors":"A. Bochkovskyi, N. Sapozhnikova","doi":"10.5604/01.3001.0016.0705","DOIUrl":"https://doi.org/10.5604/01.3001.0016.0705","url":null,"abstract":"To develop a system of automated protection of employees from Covid-19 and other infections, it is implemented through minimizing the risks of contracting the SARS-CoV-2 virus and other respiratory viral infections within the enterprise.\u0000\u0000Analysis of legal normative documents and scientific and technical literature – to update the scientific problem and formulate the research tasks; methods of system analysis - to build the overall structure of the system and to establish relationships between its elements; simulation methods - to develop the algorithms of functioning and interaction of sensors and actuators of the corresponding subsystems; methods of decision theory and data mining - to develop the training programs and testing the knowledge of employees on epidemic safety.\u0000\u0000The system of automated protection of employees from Covid-19 and other infections was developed, which, due to the connection of functionally independent elements according to a certain scheme, allows minimizing the risk of contracting the SARS-CoV-2 virus and other respiratory viral infections of employees at the enterprise and increasing their protection from the occurrence of the corresponding infections by implementing a complex of anti-epidemic measures within the system and providing and constant support of the quarantine regime at the enterprise in accordance with WHO recommendations. The developed system was implemented and pilot tested at the industrial enterprise \"Odessa Experimental Plant\" (Odessa, Ukraine). Based on the results of the development of the system, an application was filed for obtaining a patent for invention No. a 202105894 dated 20.10.2021.\u0000\u0000The number of system elements can change (increase / decrease) depending on the number of workplaces, as well as areas requiring control.\u0000\u0000The implementation of the proposed system allows increasing the level of economic sustainability of the enterprise in a complex epidemiological situation of the state or world level by minimizing the risks of enterprise shutdown as a result of the need to limit social and labour connections between employees due to implementation a full range of anti-epidemic measures (in accordance with WHO recommendations) at the enterprise and constant compliance with the established quarantine regime by the employees at enterprise.\u0000\u0000For the first time, the system of automated protection of employees from Covid-19 and other infections was developed and proposed for use at enterprises, institutions and organizations, which, unlike others, allows the implementation of a full range of appropriate anti-epidemic measures at the enterprise (according to WHO recommendations) and ensure compliance with the established quarantine regime by the employees, due to the constant management of the sanitary-epidemic control modes of admission to the enterprise, disinfection of surfaces, ventilation and air decontamination of industrial premises etc.\u0000\u0000","PeriodicalId":14825,"journal":{"name":"Journal of Achievements in Materials and Manufacturing Engineering","volume":"120 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"87869839","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Numerical investigation of geometrically nonlinear clamped uniform rods and rods with sections varying exponentially free vibration","authors":"E. Abdeddine, A. Majid, N. Bouzida, Z. Beidouri, K. Zarbane","doi":"10.5604/01.3001.0016.0703","DOIUrl":"https://doi.org/10.5604/01.3001.0016.0703","url":null,"abstract":"The present paper is intended to investigate the problem of linear and non-linear longitudinal free vibration of uniform rods and rods whose cross-sections vary exponentially at large vibration amplitudes.\u0000\u0000The method adopted consists in discretizing the energy term on linear kij and non-linear rigidity tensor bijkl, as well as the mass tensor mij. Therefore, the formulation of this structure is based on Lagrange equations and the harmonic balance method so as to obtain the nonlinear algebraic equations. These latter are solved numerically and analytically through the explicit and linearized method.\u0000\u0000The response of Clamped-Clamped uniform and non-uniform rods on our structure are highlighted in the amplitude frequency and associated first three mode shapes. Moreover, this research leads to study the influence of the exponential slope on the maximum displacement, thus emphasizing the non-uniform bars usefulness. The obtained results are then compared with the available literature with a view to validating this theory.\u0000\u0000As a perspective, the method used in this paper would be pushed to study the FDM material, taking into account other parameters related to additive manufacturing, and later to be validated experimentally.\u0000\u0000Longitudinal vibrations are important in mechanical structures; therefore, the determination of their dynamic behaviour needs to be understood. In the present study, the effect of the displacement amplitude on the exponential slope of the structure was analysed, which led to the determination of the reduction range of the vibration amplitude under resonance. However, this should be taken into account in the design process. Besides, the usefulness of the non-linearity geometric effects was demonstrated to examine these structures by considering all the parameters involved.\u0000\u0000A linearized procedure is used to solve a nonlinear algebra equation. The use of this method leads to reduce calculation time contrary to iterative methods.\u0000\u0000","PeriodicalId":14825,"journal":{"name":"Journal of Achievements in Materials and Manufacturing Engineering","volume":"22 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81822887","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Plastic filling simulation comparison analysis of the gating system in injection moulding parameter","authors":"M. Z. Umor, A. Mohd, A. M. Efendee, M. Khir, N. Bahiyah Baba","doi":"10.5604/01.3001.0016.0704","DOIUrl":"https://doi.org/10.5604/01.3001.0016.0704","url":null,"abstract":"The paper is discussed the anticipation of the simulation software precision with the real moulding process by setting up the distinctive metering stroke separation.\u0000\u0000The Inventor CAD software was used to design the product experiment and perform the simulation by applying MoldFlow application to produce the processing parameter defining for the injection moulding machines.\u0000\u0000The results predicted by this filling simulation appears reasonable result as compared to the injected product. Prediction analysis given by the software is exceptionally valuable for the injection moulding parameter setting machines which can diminish the time of mould setup and can reduce the trial stage on the production line.\u0000\u0000The gating system is the most crucial part in injection moulding process and the limitation is to get the accurate filling time and injection pressure to ensure the cavity is fully filled before the material at the gate solidify.\u0000\u0000Gating system configurations are utilized to optimize the filling conditions of injection moulding parts. This important element was developed for achieving product quality. The utilize of simulation software is exceptionally supportive in the model designing stage to predict the quality and process capacity for the product. This paper presents the filling simulation of the side gate system to the injection moulding parameter.\u0000\u0000","PeriodicalId":14825,"journal":{"name":"Journal of Achievements in Materials and Manufacturing Engineering","volume":"35 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76418003","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Contactless ultrasonic method for determining knitted fabrics tension","authors":"N. Zashchepkina, V. Zdorenko, M. O. Markin, S.V. Barilko, D.O. Shipko","doi":"10.5604/01.3001.0016.0286","DOIUrl":"https://doi.org/10.5604/01.3001.0016.0286","url":null,"abstract":"The values of the measured amplitudes of ultrasonic vibrations that have passed the controlled material have been obtained. These values were compared with the amplitude of the waves passing through the fabric sample when the initial tension was applied to it. After that, the total current value of the tension of each sample of the knitted fabric in its three zones was determined. The distribution of the total tension in different zones of the sample material was also determined.\u0000\u0000It has been established that the amplitude of ultrasonic waves passing through different zones of the textile material can be used to determine the tension of the knitted fabric over the entire width of its fabric.\u0000\u0000The possibility and expediency of determining the fabric tension on knitting equipment by using the ultrasonic contactless method has been shown. The tension of the knitted fabric in its manufacture is the main technological parameter, the value of which determines the physical, mechanical and consumer properties of the finished fabric, especially basis weight. The use of operational technological control of the tension of knitted fabrics directly during their production will improve the quality of finished products, and, accordingly, the reliability of use in personal protective equipment, in particular in body armour. It has been proposed to determine the tension of knitted fabrics in their production on knitting equipment by changing the amplitude of ultrasonic waves passing through the material under the action of tension, which also changes during the movement of the process equipment. The proposed contactless method is quite promising, since it has a number of significant advantages over the existing contact methods. In the course of the research, experimental measurements of the amplitude of ultrasonic waves have been carried out. These waves passed through samples of fabric of various materials while stretching. The samples of knitted fabrics were irradiated with an ultrasonic pulse signal with a wave frequency of 40 kHz. The samples of knitted fabrics from 58x2 Tex Kevlar threads and high molecular weight 44x3 Tex polyethylene yarns with double weave 1x1 elastic have been taken as a basis for the research.\u0000\u0000For textile fabrics, the structure of which does not allow stretching through pores under the action of tension, it is necessary to additionally adjust the contactless sensors in frequency and capacity depending on the corresponding sample.\u0000\u0000The values of the measured amplitudes of ultrasonic vibrations that have passed the controlled material have been obtained. These values were compared with the amplitude of the waves passing through the fabric sample when the initial tension was applied to it. After that, the total current value of the tension of each sample of the knitted fabric in its three zones was determined. The distribution of the total tension in different zones of the sample material was also determined.\u0000\u0000The dependences of the ampli","PeriodicalId":14825,"journal":{"name":"Journal of Achievements in Materials and Manufacturing Engineering","volume":"46 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"89953986","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Three-phases bubble column to polyethylene terephthalate depolymerization for cement mortar composites improvement","authors":"A. Hameed, M. Alzuhairi, S. Ibrahim","doi":"10.5604/01.3001.0016.0284","DOIUrl":"https://doi.org/10.5604/01.3001.0016.0284","url":null,"abstract":"This paper aims to prepare depolymerized polyethylene terephthalate (DPET) powder from recycled plastic water bottles. Adding this DPET powder to the cement mortar was also studied.\u0000\u0000The adopted PET depolymerization process includes the usage of both ethylene glycol (EG) as solvent and nano-MgO as a catalyst. A bubble column reactor was designed for this process. Five different mortar groups were made; each has different DPET content of 0%, 1%, 3%, 6% and 9% as a sand replacement. The flexural strength test and the water absorption measurement are done after two curing periods: 7 and 28 days.\u0000\u0000The research finding demonstrated that the flexural strength of mortar was reduced by increasing the DPET powder percentage and the maximum dropping was 15% when 9% of DPET was added. The ability of the mortar to absorb the water was reduced by 14.5% when DPET powder was 9%. The mortar microstructure is featured with fewer cavities and porosity.\u0000\u0000This work’s employed bubble column technique is limited only to the laboratory environment and needs to be scaled up within industrial mass production. For future research, it is suggested to decrease depolymerization time by using smaller pieces of plastic water bottle waste and trying other types of nanocatalyst.\u0000\u0000The modified mortar can be utilized in areas where moisture, rainfalls, and sanitation systems exist.\u0000\u0000The article claims that depolymerized waste PET improves chemical process efficiency by lowering reaction time and improving mass and heat transfer rates. Besides, this approach saves money. It is found out that the depolymerized plastic waste is much more functional due to its high cohesion capability than being used as small PET pieces.\u0000\u0000","PeriodicalId":14825,"journal":{"name":"Journal of Achievements in Materials and Manufacturing Engineering","volume":"17 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82530487","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Parametric optimisation of microhardness on heat-treated electroless Ni-YSZ cermet coating","authors":"N. Bahiyah Baba, A. S. Ghazali, A. A. Abdul Rahman, S. Sharif","doi":"10.5604/01.3001.0016.0293","DOIUrl":"https://doi.org/10.5604/01.3001.0016.0293","url":null,"abstract":"The paper discusses the parametric optimisation of the electroless Ni-YSZ cermet coating microhardness upon heat treatment. Heat treatment is a process to increase the mechanical properties of the electroless nickel coating and it can be enhanced by manipulating its parameters. Parametric optimisation is conducted by the design of experiment full factorial 3x3 with 27 runs. Treating temperature, treating time and ceramic particle size parameters at 3-level are evaluated using statistical tool ANOVA in Minitab20.\u0000\u0000Ni-YSZ cermet coating is deposited onto a high-speed steel substrate using the electroless nickel co-deposition method. The temperature and time were varied in a range of 300-400oC and 0-2 hours respectively. The microhardness measurements were carried out using a Vickers microhardness tester (Shimadzu) according to ISO 6507-4. The surface characterisation was analysed using Cambridge Stereoscan 90 Scanning Electron Microscope (SEM) coupled with Energy Dispersive X-ray Analysis (EDXA).\u0000\u0000The optimum condition in obtaining high microhardness on Ni-YSZ cermet coating is evaluated by statistical tool ANOVA in Minitab20 software. It is found that the most significant parameter for high microhardness is at the treating temperature of 400oC followed by treating time at 2 hours using nano-sized YSZ particles. The ceramic particle size is found not a significant parameter in obtaining a high microhardness, however it has effect on interaction between treating temperature and treating time.\u0000\u0000The paper only limits to the optimisation condition of microhardness on Ni-YSZ cermet coating hardness property by varying heat treatment parameters.\u0000\u0000The optimisation condition obtained might only applicable to the electroless Ni-YSZ cermet coating with similar electroless nickel solution and treatments.\u0000\u0000The value of this work is the heat treatment parametric optimisation to obtain high microhardness on electroless Ni-YSZ cermet coating by using the design of experiment 3-level full factorial.\u0000\u0000","PeriodicalId":14825,"journal":{"name":"Journal of Achievements in Materials and Manufacturing Engineering","volume":"90 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"79468981","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Topology optimization of a 3D part virtually printed by FDM","authors":"I. Antar, M. Othmani, K. Zarbane, M. El Oumami, Z. Beidouri","doi":"10.5604/01.3001.0016.0289","DOIUrl":"https://doi.org/10.5604/01.3001.0016.0289","url":null,"abstract":"This research work aims to exhibit the possibility to topologically optimize a mesostructured part printed virtually by FDM taking into account the manufacturing parameters.\u0000\u0000The topology optimization of a 3D part printed by FDM was carried out using the software ABAQUS. On the other hand, a numerical approach using a script based on G-code file has been achieved to create a virtual model. Then, it was optimized according to the Solid Isotropic Material with Penalization (SIMP) method, which minimizing the strain energy was the objective function and the volume fraction of 30% was the constraint.\u0000\u0000The final topological optimization design of the virtual model is approximately similar to the homogeneous part. Furthermore, the strain energy of the virtual model is less than the homogeneous part. However, the virtually 3D optimized part volume is higher than the homogeneous one.\u0000\u0000In this study, we have limited our study on one layer owing to reduce the simulation time. Moreover, the time required to optimize the virtual model is inordinate. The ensuing study, we will optimize a multiple layer of the mesostructure.\u0000\u0000Our study provides a powerful method to optimize with accurately a mesostructure taken into consideration the manufacturing setting.\u0000\u0000In this paper, we have studied through an original approach the potential of topology optimization of a 3D part virtually printed by FDM. By means of our approach, we were able to optimize topologically the 3D parts printed by FDM taking into account the manufacturing parameters.\u0000\u0000","PeriodicalId":14825,"journal":{"name":"Journal of Achievements in Materials and Manufacturing Engineering","volume":"27 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84772426","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}