2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM)最新文献

Signal Averaging Noise Reduction under Dynamic Time Warping 动态时间规整下的信号平均降噪

2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM) Pub Date : 2021-11-25 DOI: 10.1109/nanofim54124.2021.9737341

Adam Lysiak

引用次数: 0

Theoretical considerations on application of artificial intelligence in coordinate metrology 人工智能在坐标计量中应用的理论思考

2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM) Pub Date : 2021-11-25 DOI: 10.1109/NanofIM54124.2021.9737344

M. Wieczorowski, Dawid Kucharski, P. Sniatala, G. Królczyk, P. Pawlus, B. Gapiński

{"title":"Theoretical considerations on application of artificial intelligence in coordinate metrology","authors":"M. Wieczorowski, Dawid Kucharski, P. Sniatala, G. Królczyk, P. Pawlus, B. Gapiński","doi":"10.1109/NanofIM54124.2021.9737344","DOIUrl":"https://doi.org/10.1109/NanofIM54124.2021.9737344","url":null,"abstract":"Artificial intelligence and solution-finding methods based on it are becoming more and more common not only in science, but also in everyday life. It is one of the important elements of Industry 4.0 strategy, supporting human in making decisions especially based on large sets of input data. Also in length and angle metrology, opportunities are opening up to use artificial intelligence to solve technical issues. This is not only related to technology, but also to the social factor. With increasing problems related to the availability of highly qualified staff, the use of artificial intelligence methods in the selection of measurement strategy, measurement conditions, filtration techniques and other elements affecting the implementation of the measurement process and obtaining a correct measurement result, becomes a necessity. This paper discusses the possibilities of using artificial intelligence in length metrology. In the macro scale the selection of the measurement strategy and measurement conditions for contact and non-contact technology devices is presented. On a micro scale, the possibility of selecting filtration techniques and unevenness parameters for functional applications is shown.","PeriodicalId":130801,"journal":{"name":"2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM)","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123354444","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 4

Review communication capabilities of nanodevices - nanonetworks, technological barriers, and potential for future use 回顾纳米器件的通信能力——纳米网络、技术障碍和未来使用的潜力

2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM) Pub Date : 2021-11-25 DOI: 10.1109/NanofIM54124.2021.9737351

M. Jonek, D. Zmarzły

{"title":"Review communication capabilities of nanodevices - nanonetworks, technological barriers, and potential for future use","authors":"M. Jonek, D. Zmarzły","doi":"10.1109/NanofIM54124.2021.9737351","DOIUrl":"https://doi.org/10.1109/NanofIM54124.2021.9737351","url":null,"abstract":"Progressive technological development has made it possible to miniaturize devices to the nano scale. The production of various structures is made possible by nanotechnology techniques, a discipline that focuses on the development of nanodevices. These are integrated functional devices consisting of nano-sized components. Nanomachines are miniature elements consisting of an ordered set of molecules that are able to perform very simple tasks. To exploit the various functionalities and potentials of nanomachines, it is necessary to be able to connect them in a network - nanonetworks. The communication capability between nanomachines is presented In this paper. Spheres are listed, showing the potential of nanos networks and their use. A comparison is made between the traditional model of networked communication and nanonetworks, new connection mechanisms, and technological barriers preventing widespread use of nanonetworks. The purpose of writing this paper is to provide a better understanding of current research problems of nanoscale networks and to emphasize the need for the development of new protocols or architectures that must be invented in order for nanoscale networks to be widely used.","PeriodicalId":130801,"journal":{"name":"2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM)","volume":"3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122566726","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Synthesis and evaluation of the gas sensing properties of 2D h-BNNSs as a semiconductor based gas sensor on H2S and CO gases at various temperatures 二维h-BNNSs半导体气体传感器在不同温度下对H2S和CO气体的气敏性能的合成和评价

2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM) Pub Date : 2021-11-25 DOI: 10.1109/NanofIM54124.2021.9737355

Magopa T Kekana, T. Mosuang, L. Sikhwivhilu, Abram Mahladisa, V. Saasa, B. Mwakikunga

{"title":"Synthesis and evaluation of the gas sensing properties of 2D h-BNNSs as a semiconductor based gas sensor on H2S and CO gases at various temperatures","authors":"Magopa T Kekana, T. Mosuang, L. Sikhwivhilu, Abram Mahladisa, V. Saasa, B. Mwakikunga","doi":"10.1109/NanofIM54124.2021.9737355","DOIUrl":"https://doi.org/10.1109/NanofIM54124.2021.9737355","url":null,"abstract":"Two-dimensional (2D) hexagonal boron nitride nanosheets (h-BNNSs) were synthesized using wet chemical reaction method through chemical vapor deposition (CVD) catalyst-free approach. The crystallinity of the nanosheets with the stacking of the B and N honeycomb lattice was validated by the XRD, while the TEM disclosed the specimen orientations and chemical compositions of phases with the number of layers of a planar honeycomb BN sheet. The FTIR, RM and the UV-vis expressed the formation of the in-plane, out-of-plane h-BN vibrations and, the nature of the surface with the thickness together with its optical properties. BET examined the surface properties of the h-BNNSs. The gas sensing properties of the 2D h-BNNSs were also investigated on hydrogen sulfide (H2S) and carbon monoxide (CO). The fabricated sensor based on 800 - $boldsymbol{900}^{circ}mathrm{C}$ h-BNNSs showed good sensitivity towards ppm of H2S at $boldsymbol{250}^{circ}mathrm{C}$. The excellent gas sensing properties could be attributed to high surface area, small crystallite size, defects of h-BNNSs. Overall, the h-BNNSs were found to be more sensitive to H2S than CO.","PeriodicalId":130801,"journal":{"name":"2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM)","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127320851","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Parametric description of one-process surface texture 单工序表面纹理的参数描述

2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM) Pub Date : 2021-11-25 DOI: 10.1109/NanofIM54124.2021.9737339

P. Pawlus, R. Reizer, M. Wieczorowski, G. Królczyk

{"title":"Parametric description of one-process surface texture","authors":"P. Pawlus, R. Reizer, M. Wieczorowski, G. Królczyk","doi":"10.1109/NanofIM54124.2021.9737339","DOIUrl":"https://doi.org/10.1109/NanofIM54124.2021.9737339","url":null,"abstract":"Description of areal (3D) surface topography using only one parameters does not completely characterize surface. The analysis of linear correlation between parameters is helpful in selection of parameters. In this work one hundred surface textures after five machining treatments (grinding, polishing, vapor blasting, milling and one-process honing) measured by white light interferometer were analyzed. Additionally, selected twenty one-process surfaces after various treatments were studied. On the basis of correlation and regression analyses, sets of parameters describing individual surface groups and generally one-process surfaces were determined. It was found that one-process surfaces can be characterized by parameters: Sq, Sal, Str, Sdq, Sq/Sa and Sp/Sz. The extended characterization contains also parameters: Ssk, Sku, and Spd. Machining process can be identified based on the following pairs of parameters: Sq/Sa and Sp/Sz, Sdq and Sal as well as Str and Spd. Sq/Sa and Sp/Sz ratios were found to better characterize ordinate distribution of one-process surface texture than Ssk and Sku.","PeriodicalId":130801,"journal":{"name":"2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM)","volume":"12 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128466210","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 9

Application of nanocarbon structures to optimize the design parameters of conductive surfaces of electroadhesive pads 应用纳米碳结构优化电粘合垫导电表面设计参数

2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM) Pub Date : 2021-11-25 DOI: 10.1109/NanofIM54124.2021.9737345

W. Kalus, Jarosław Zaygarlicki, Ł. Nagi, M. Kozioł

{"title":"Application of nanocarbon structures to optimize the design parameters of conductive surfaces of electroadhesive pads","authors":"W. Kalus, Jarosław Zaygarlicki, Ł. Nagi, M. Kozioł","doi":"10.1109/NanofIM54124.2021.9737345","DOIUrl":"https://doi.org/10.1109/NanofIM54124.2021.9737345","url":null,"abstract":"This paper presents a measurement experiment that investigates the effect of using nanocarbon structures coating conducting surfaces energized with high voltage on the conditions for generating high-voltage phenomena. The phenomena studied included current leakage of an insulated plate, ionization phenomena of gases surrounding the plate, optical phenomena accompanying ionization, and detection of gases synthesized under high voltage. The tests were conducted in a gaseous environment with proportions matching the composition of air at normal conditions and at reduced pressure. For comparison, the series of tests was repeated for conductive metallic wafers without the addition of nanostructures. The aim of the study was to analyze the application of nanocarbon structures for the construction of more efficient electroadhesive pads with lower power losses related to current leakage, electroadhesive pads with higher generated electrostatic force and a wider range of applicability for the attraction of different materials. The application of the nanocarbon structure on the electroadhesive pad resulted in the generation of corona discharges in the form of electric arcs and a violet-pink glow.","PeriodicalId":130801,"journal":{"name":"2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134155575","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1

Monitoring of glucose in people living with diabetes mellitus: A study comparing nano-based acetone/glucose breath analyzer, two commercial glucometers and laboratory-based glucose analysis 糖尿病患者血糖监测:纳米丙酮/葡萄糖呼吸分析仪、两种商用血糖仪和实验室血糖分析的比较研究

2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM) Pub Date : 2021-11-25 DOI: 10.1109/NanofIM54124.2021.9737347

L. Tshotetsi, B. Mwakikunga, P. Rheeder

{"title":"Monitoring of glucose in people living with diabetes mellitus: A study comparing nano-based acetone/glucose breath analyzer, two commercial glucometers and laboratory-based glucose analysis","authors":"L. Tshotetsi, B. Mwakikunga, P. Rheeder","doi":"10.1109/NanofIM54124.2021.9737347","DOIUrl":"https://doi.org/10.1109/NanofIM54124.2021.9737347","url":null,"abstract":"Non-invasive glucose testing is one of the novel methods for monitoring glucose in people living with diabetes mellitus. We researched how breathe acetone derived glucose levels compare to serum glucose and capillary glucose measure on two commercial glucose meters in diabetes mellitus patients at Steve Biko Academic Hospital. Breath acetone samples were collected in 127 patients from a diabetes clinic which was compared to lab analysed glucose and other 2 commercial glucose meters in a cross-sectional study. 69% $boldsymbol{(mathrm{n}=87)}$ of participants had type 1 diabetes. The majority of the diabetes patients were African 49 (58.34%). The mean acetone derived glucose level was $boldsymbol{9.3pm 4.3}$ mm whereas laboratory glucose mean was $boldsymbol{9.5pm 5.3}$ mmol/l, Accu-Chek meter mean was $boldsymbol{10pm 4.3}$ mmol/L and On Call Plus meter mean was $boldsymbol{9.8pm 5}$ mmol/L. After adjusting for body mass index, sex, race, age and other variables, there was no difference between breath acetone and laboratory glucose measurements (coefficient 0.20, confidence interval-0.41 to 0.81 and P-value 0.511). Our study reports that breath acetone glucose is comparable to laboratory glucose measurement and the 2 glucometers used for monitoring in diabetes mellitus. Therefore, the device could be of clinical importance in the monitoring of glucose in diabetics. Further exploration of its use on screening for elevated glucose or criticalcare is suggested.","PeriodicalId":130801,"journal":{"name":"2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM)","volume":"308 4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121164943","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Low-cost Portable System for Capacitance Measurement based on Active Bridge and Relaxation Oscillator 基于有源电桥和弛豫振荡器的低成本便携式电容测量系统

2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM) Pub Date : 2021-11-25 DOI: 10.1109/NanofIM54124.2021.9737348

A. Al-Hamry, Ahmed Yahia Kallel, Guangyu Liu, Olfa Kanooun

{"title":"Low-cost Portable System for Capacitance Measurement based on Active Bridge and Relaxation Oscillator","authors":"A. Al-Hamry, Ahmed Yahia Kallel, Guangyu Liu, Olfa Kanooun","doi":"10.1109/NanofIM54124.2021.9737348","DOIUrl":"https://doi.org/10.1109/NanofIM54124.2021.9737348","url":null,"abstract":"In this paper, a capacitance measurement circuit based on an active bridge and relaxation oscillator has been developed to accurately measure capacitance in the picofarad range. The change of the measured capacitance value causes the unbalance of the active bridge, and the circuit converts the change of the capacitance value into the change of the output frequency. A diode is used to adapt voltage levels to the microcontroller (Arduino UNO). In addition, every 1000 frequency cycles are measured and averaged to reduce the effects of direct current (DC) errors and the jitter. The selection of LT1028, as the oscillator part's amplifier, improved measurement accuracy where the simulation result error is less than 1%, and the final measurement accuracy is below 3%. The design of a smaller PCB, adding a wireless module, and realization of Android App to control and switch the reference capacitance and using the LCD make it portable and IoT compatible. The experimental results of the circuit show that under the five different reference capacitors, accurate capacitance measurement is achieved from 80 pF to 900 pF, and the frequency range is between 9 kHz and 13 kHz. Furthermore, this circuit has good linearity. Therefore, it has the potential as a portable capacitance measurement device, which can be used in a dedicated capacitance measurements for example nanomaterials based capacitive sensors.","PeriodicalId":130801,"journal":{"name":"2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM)","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117318541","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Effect of nanoparticles as a lubricants in nano-MQL machining of metallic materials: A review 纳米颗粒作为润滑剂在金属材料纳米mql加工中的作用综述

2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM) Pub Date : 2021-11-25 DOI: 10.1109/NanofIM54124.2021.9737354

M. Korkmaz, M.K. Gupta, Grzegorz M. Królczyk, R. Maruda, Zhixiong Li

{"title":"Effect of nanoparticles as a lubricants in nano-MQL machining of metallic materials: A review","authors":"M. Korkmaz, M.K. Gupta, Grzegorz M. Królczyk, R. Maruda, Zhixiong Li","doi":"10.1109/NanofIM54124.2021.9737354","DOIUrl":"https://doi.org/10.1109/NanofIM54124.2021.9737354","url":null,"abstract":"Nanofluids with minimal lubrication (MQL) are drawing attention with laws and regulations that improve environmental protection. Researchers have focused on a variety of issues concerning the performance and application of nanofluids in MQL processing. This review effort attempts to evaluate some of these researches in order to understand the influence of nanoparticles, as well as the kind and on the machinability performance of metallic materials. Furthermore, it has been found that the rise of unique types of nanoparticles and/or nanofluids combined with other types of nanoparticles considerably alters MQL processing performance (hybrid nanofluids). It has been observed that graphene oxide, paraffin wax, and soy-based nanofluids, as well as MoS2 nanoparticles and hybrid nanofluids, such as multi-layer aluminum carbon nanotubes and alumina graphene, provide effective lubricating and cooling effects in MQL processing. However, to optimize their application in machining operations, the thermophysical and wettability features of hybrid nanofluids during aging, as well as difficulties associated to nanoparticle clustering at greater concentrations, must be explored. This paper finally lists several types of nanoparticles that can be used for further machining studies to achieve collaborative effects on MQL processing performance.","PeriodicalId":130801,"journal":{"name":"2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM)","volume":"31 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114569460","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1

The concept of an expert system for partial discharge assessment in power transformers 电力变压器局部放电评估专家系统的概念

2021 6th International Conference on Nanotechnology for Instrumentation and Measurement (NanofIM) Pub Date : 2021-11-25 DOI: 10.1109/nanofim54124.2021.9778020

M. Kunicki

引用次数: 0