{"title":"Analysis of the Instrumentation Amplifiers Errors by Simulation Modeling","authors":"Anton Gulko, A. Serov","doi":"10.1109/UralCon52005.2021.9559549","DOIUrl":"https://doi.org/10.1109/UralCon52005.2021.9559549","url":null,"abstract":"Currently, instrumentation amplifiers are widely used to construct measurement channels of measurement and control equipment. This amplifiers are differential, which makes it possible to obtain an output signal proportional to the difference between the input voltages. The value of the voltage gain, depending on the design features, can be set by using an additional external resistance, external jumpers or by applying an external control digital code. Like any measuring transducer, an instrumentation amplifier is characterized by an additive, multiplicative, and nonlinear error component. Accounting for each of the listed error components in the total measurement error of the considered signal parameter is often a difficult task. For this reason, simulation modeling is widely applied. This paper discusses the principles of constructing a model of an instrumental amplifier, taking into account the imperfection of its transfer characteristic. The presence of additive and multiplicative components of the error, transfer function nonlinearity, magnitude response, finite input and output ranges are taken into account. An existing model obtained by using the Spice-model in Tina-TI program (developed by Texas Instruments company) is considered and a model was performed by using the Simulink software program. The resulting model makes it possible to simulate instrumental amplifiers of all known types, as well as decisive amplifiers, dividers and other analog and digital measurement converters.","PeriodicalId":123717,"journal":{"name":"2021 International Ural Conference on Electrical Power Engineering (UralCon)","volume":"475 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123282028","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Filter Reed-Switch Current Protections","authors":"B. Mashrapov, Assemgul Zhantlessova","doi":"10.1109/UralCon52005.2021.9559547","DOIUrl":"https://doi.org/10.1109/UralCon52005.2021.9559547","url":null,"abstract":"Filters for symmetrical current components can be designed with the use of not only ferromagnetic current transformers, but also with inductors and reed switches. Reed switches are preferable, but this design should include duplication and self-diagnostics to ensure reliability. A measurement unit on the basis of reed switches fixed near the coplanar phases of an electrical installation to be protected is suggested. It simultaneously functions as a current relay and a negative-sequence current filter. The reliability of its operation is ensured by the design simplicity, self-diagnosis of malfunctions, and duplication of elements. A technique for calculating the parameters of the current filter elements is developed. It consists of 29 formulas, most of which are used for the calculation of the coordinates of the reed switches and of the inductions of magnetic fields affecting them. The features of operation of protection with this measurement unit and self-diagnostics procedures are described.","PeriodicalId":123717,"journal":{"name":"2021 International Ural Conference on Electrical Power Engineering (UralCon)","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126804530","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Method for Selecting a Set of Image Files Similar to the Object of Interest","authors":"I. Bikmullina, Radik R. Vafin","doi":"10.1109/UralCon52005.2021.9559535","DOIUrl":"https://doi.org/10.1109/UralCon52005.2021.9559535","url":null,"abstract":"In this research, the scientific novelty is the development and testing of the method. This method will allow combining the high speed of the cascade classifier and the quality of the artificial neural network. As an approbation of the work in this article, we study the set of image files. The set of image files are available in the directory on the disk. Next, we select a set of files. The set of files is similar to the object of interest image files. It means, that we can't identical any objects. Then we rewrite files to the target directory. This set should later be used for training a neural network. Images of the object of interest can be in any orientation and on any background. This non-identity must be recognized by a trained neural network. For the purposes of forming such a set, we will need an identifier that has sufficient accuracy for these purposes. Here we do not need very high accuracy. The very identification error of this preliminary analyzer helps us of introducing some dissimilarity between the objects of the images. The task is complicated by the fact that objects can have different sizes (scale) and orientation in space. Our approach based on cascade classifiers and neural networks combines the high speed of the cascade classifier and the quality of the artificial neural network. And the stage of preparing training data for the network is of great importance.","PeriodicalId":123717,"journal":{"name":"2021 International Ural Conference on Electrical Power Engineering (UralCon)","volume":"236 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133422294","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
B. Issabekova, Mirat Tokombaev, Assemgul Zhantlessova
{"title":"Reed Switch Protection Devices with Symmetric Component Filter without Current Transformers","authors":"B. Issabekova, Mirat Tokombaev, Assemgul Zhantlessova","doi":"10.1109/UralCon52005.2021.9559592","DOIUrl":"https://doi.org/10.1109/UralCon52005.2021.9559592","url":null,"abstract":"This article provides a diagram of a sequence filter on sealed contacts with windings for electrical installations with a delta phase configuration. The theoretical framework is given for arranging protection, executing the current shut-off functions and sequence filters. The choice of filter parameters and methods for vector plotting that characterize its behavior are proposed. It describes a calibration method of filter-combined current on sealed contacts for an electrical installation with conductors located at the corners of an equilateral triangle. A protection feature calculation method based on determining the coordinates of sealed contacts close to a triangular phase structure is developed. The calculation by the triggering feature of the conventional overcurrent protection is offered. An example of the protection trigger settings selection and the sensitivity verification is described.","PeriodicalId":123717,"journal":{"name":"2021 International Ural Conference on Electrical Power Engineering (UralCon)","volume":"69 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127690263","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Integrated LC-Components for Electrical Systems and Devices","authors":"R. Sattarov, R. Khazieva, M. Ivanov","doi":"10.1109/UralCon52005.2021.9559527","DOIUrl":"https://doi.org/10.1109/UralCon52005.2021.9559527","url":null,"abstract":"The technical disadvantages of electrical systems and devices include the large mass and large dimensions of its constituent electromagnetic elements. The usual way to eliminate these technical disadvantages is the frequency increasing. In this paper, the authors consider a different effective way to reduce weight and size. This way is the functional integration of electromagnetic elements (EME) in the converter and power electronics. The integrated EMEs perform several functions, such as transformation, stabilization, filtration, protection, etc. The performed analysis of hybrid EME confirms the feasibility and efficiency of their application in various electrical converters. The paper proposes a classification of electrical devices based on integrated LC-component. An example of useful applications of integrated LC-component is induction heating devices sold to the oil and gas industry.","PeriodicalId":123717,"journal":{"name":"2021 International Ural Conference on Electrical Power Engineering (UralCon)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127990939","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Investigation of the Robust Stability of a Gas Turbine Engine","authors":"N. Tseligorov, A. Chubukin, E. Tseligorova","doi":"10.1109/UralCon52005.2021.9559571","DOIUrl":"https://doi.org/10.1109/UralCon52005.2021.9559571","url":null,"abstract":"The present paper considers the speed control system of a single-shaft gas turbine engine (GTE). A well-known transfer function of the GTE has been modeled in the Matlab environment. A digital PID controller has been calculated that provides the preset dynamic performance indicators of the discrete GTE speed control system functioning. An assessment of the robust stability of the GTE control system has been performed. A modified root locus for the transfer function with interval coefficients has been constructed. The graphical method is based on the application of the strong Kharitonovs theorem which provides a visual demonstration of the absolute robust stability of the GTE speed control system.","PeriodicalId":123717,"journal":{"name":"2021 International Ural Conference on Electrical Power Engineering (UralCon)","volume":"39 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128663466","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Alyona S. Demidenko, S. Kudelina, G. Parfenov, G. Shvedov
{"title":"Analysis of the Lighting Load Contribution in Modern Apartments","authors":"Alyona S. Demidenko, S. Kudelina, G. Parfenov, G. Shvedov","doi":"10.1109/UralCon52005.2021.9559491","DOIUrl":"https://doi.org/10.1109/UralCon52005.2021.9559491","url":null,"abstract":"Nowadays, technological progress leads to a change and expansion of the variety of domestic electric appliances. The character and power consumption of a modern apartment is changing. Currently, the issue of calculating the power consumption of apartments and houses is especially acute due to the constant rapid development of technologies. Incandescent lamps were replaced by energy-saving (fluorescent) lamps, which are currently being replaced by LED lamps. That is why the load spent on lighting has decreased several times. The question arises of updating data on the apartment's electricity consumption and the contribution of lighting to the apartment's power consumption.","PeriodicalId":123717,"journal":{"name":"2021 International Ural Conference on Electrical Power Engineering (UralCon)","volume":"7 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116987022","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Automatic Optimization Operating Time of the Hot Blast Stoves Parallel Mode","authors":"A. Prasolov, S. Andreev, Valeriya Stebeleva","doi":"10.1109/UralCon52005.2021.9559560","DOIUrl":"https://doi.org/10.1109/UralCon52005.2021.9559560","url":null,"abstract":"The research presents the method of the automatic operating time adjustment of the hot blast stoves’ parallel mode. Hot blast stove characteristics are deteriorating in the process of hot blast unit operation. Characteristics changes are unpredictable and require constant monitoring to adjust switching moments. The goal of switching times determination is to achieve the highest possible hot blast temperature for the current capacity and condition of each hot blast stove, which increases the overall energy of the hot blast smelting and thus improves the metallurgical process indicators. The PD-controller is proposed for the implementation of an automatic switching times determination process. A signal of the hot blast temperature difference at the end of the blast period is sent to the controller input, and the output signal of the controller will be the ratio coefficient of the operating periods of the hot blast stoves. The choice of period ratio rather than time change itself as the required parameter is due to the necessity of stable total cycle time of the air heater unit operating in parallel mode.","PeriodicalId":123717,"journal":{"name":"2021 International Ural Conference on Electrical Power Engineering (UralCon)","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115197875","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Development of a Prototype System for Monitoring the Operating Mode of a Solar Power Plant","authors":"A. Vaskov, Inora Ainulloeva","doi":"10.1109/UralCon52005.2021.9559602","DOIUrl":"https://doi.org/10.1109/UralCon52005.2021.9559602","url":null,"abstract":"The article presents a desktop model that includes two solar panels, four motors and microcontrollers, as well as current sensors, temperature sensors, an illumination module and a relay module, with which the following indicators were measured: current strength, solar radiation intensity and temperature. The relevance of the topic of the work under study is described, the purpose and objectives of this work are explained.Physical modeling of the object under study is considered, including the development of a desktop model and programming of a system for obtaining information. Systems for displaying and archiving data have been developed using Arduino software.On the basis of Arduino, the object under study is modeled and descriptions of the demonstration of the work of the desktop model and the receipt of data are presented.The article analyzes an overview on the research topic, the problems of operating energy complexes, and also describes the types of monitoring stations.","PeriodicalId":123717,"journal":{"name":"2021 International Ural Conference on Electrical Power Engineering (UralCon)","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114681129","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Simulation of a Self-Regulating Eddy-Current Brakes with Permanent Magnets","authors":"R. Sattarov, Damir Garafutdinov","doi":"10.1109/UralCon52005.2021.9559615","DOIUrl":"https://doi.org/10.1109/UralCon52005.2021.9559615","url":null,"abstract":"This paper describes the possibility of control and regulating the electromagnetic torque of the eddy current brakes (ECBs) with permanent magnets (PMs). This achieved by dividing conducting disc rotor on several parts that are connected by springs. Because of interaction between centrifugal forces and spring forces, the rotor parts can take a place in working air gap where the PMs create magnetic field. Since centrifugal forces are determined by the rotational speed, self-regulation of the brake torque is realized. The paper presents the results of simulation of a magnetic field and a method for assessing the electromagnetic moment.","PeriodicalId":123717,"journal":{"name":"2021 International Ural Conference on Electrical Power Engineering (UralCon)","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127243244","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}