Applied Superconductivity最新文献

{"title":"Microwave properties and applications of Y–Ba–Cu–O thin films grown on various substrates","authors":"Sang Young Lee ,&nbsp;J.H. Suh ,&nbsp;O.K. Kwon ,&nbsp;J.Y. Cho ,&nbsp;B.H. Park ,&nbsp;J.H. Lee ,&nbsp;V.A. Komashko ,&nbsp;Y.H. Kim ,&nbsp;T.S. Hahn ,&nbsp;B. Oh ,&nbsp;H.T. Kim ,&nbsp;Hu-Jong Lee","doi":"10.1016/S0964-1807(99)00047-2","DOIUrl":"10.1016/S0964-1807(99)00047-2","url":null,"abstract":"<div><p><span>Microwave properties of YBa</span>₂Cu₃O_{7-<em>δ</em>} (YBCO) films grown on (100) LaAlO₃ (LAO), (110) NdGaO₃ (NGO) and (001) SrLaAlO₄ (SLAO) substrates were studied in the form of a microstrip ring resonator at temperatures above 20<!--> <!-->K. The YBCO resonator on a SLAO substrate showed microwave properties better than or comparable to other YBCO resonators on LAO substrates. For the YBCO resonators on LAO and SLAO substrates, both <em>Q</em>_U and <em>f</em>₀ appeared to decrease as the temperature was raised. Meanwhile the resonator on a NGO substrate showed different behaviors with <em>Q</em>_U showing a peak at ∼70<!--> <span>K, which are attributed to the unique temperature dependence of the loss tangent of the NGO substrate. An X-band oscillator with a YBCO ring resonator coupled to the circuit was prepared and its properties were investigated at low temperatures. The frequency of the oscillator signal appeared to change from 7.925</span> <!-->GHz at 30<!--> <!-->K to 7.878<!--> <!-->GHz at 77<!--> <!-->K, which was mostly attributed to the change in <em>f</em>₀ of the YBCO ring resonator. The signal power appeared to be more than 4.5<!--> <!-->mW at 30<!--> <!-->K and 2.1<!--> <!-->mW at 77<!--> <!-->K, respectively. At 55<!--> <!-->K, the frequency of the oscillator signal was 7.917<!--> <!-->GHz with the 3<!--> <!-->dB-linewidth of 450<!--> <!-->Hz.</p></div>","PeriodicalId":100110,"journal":{"name":"Applied Superconductivity","volume":"6 10","pages":"Pages 809-815"},"PeriodicalIF":0.0,"publicationDate":"1999-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1016/S0964-1807(99)00047-2","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80390894","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Broadband nuclear magnetic resonance using DC SQUID amplifiers","authors":"C.P. Lusher ,&nbsp;Junyun Li ,&nbsp;M.E. Digby ,&nbsp;R.P. Reed ,&nbsp;B. Cowan ,&nbsp;J. Saunders ,&nbsp;D. Drung ,&nbsp;T. Schurig","doi":"10.1016/S0964-1807(99)00016-2","DOIUrl":"10.1016/S0964-1807(99)00016-2","url":null,"abstract":"<div><p>We have constructed two pulsed NMR spectrometers in which the signal is coupled to the input coil of a low <em>T</em>_c<span> DC SQUID using a superconducting flux transformer, yielding broadband response, with bandwidth determined by the SQUID electronics. A 50 kHz bandwidth commercial system has been used to observe free induction decay signals from platinum powder, bulk platinum, </span>³He gas and surface monolayers of ³He in the temperature range from 1.4 to 4.2<!--> <!-->K and at frequencies from 5 to 40 kHz. The observed signal-to-noise ratio is as calculated with the noise dominated by flux noise in the SQUID in all samples but the bulk metal. A second system, which operates in flux-locked loop mode with bandwidth of 3.4<!--> <!-->MHz using a SQUID with additional positive feedback, has been used to observe NMR signals from platinum powder at frequencies from 38 to 513 kHz and at a temperature of 4.2<!--> <!-->K. The advantage of this technique in the study of systems with short <em>T</em>₂ at frequencies below 1<!--> <!-->MHz is discussed. In addition we discuss the benefits of both broadband and tuned input circuits for NMR detection and we describe the performance of a spectrometer with a tuned input circuit which has been used to obtain signals at 1<!--> <!-->MHz from platinum powder at 4.2<!--> <!-->K and from ∼2 layers of ³He absorbed on a surface area of 0.11<!--> <!-->m² at 1.7<!--> <!-->K. The amplifier noise temperature is predicted to be 60 mK in the ³He experiment. This demonstrates the potential of the tuned set-up for measurements at low millikelvin temperatures on systems with low spin density and with <em>T</em>₂<span> greater than several hundred microseconds.</span></p></div>","PeriodicalId":100110,"journal":{"name":"Applied Superconductivity","volume":"6 10","pages":"Pages 591-601"},"PeriodicalIF":0.0,"publicationDate":"1999-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1016/S0964-1807(99)00016-2","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85166595","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"A low noise HTS SQUID magnetometer with an on-chip pickup loop coupled via an intermediate flux transformer","authors":"Nicholas J. Exon,&nbsp;Mark N. Keene,&nbsp;Julian S. Satchell,&nbsp;Nigel G. Chew,&nbsp;Matthew J. Wooliscroft,&nbsp;Karan Lander,&nbsp;Richard G. Humphreys","doi":"10.1016/S0964-1807(99)00026-5","DOIUrl":"10.1016/S0964-1807(99)00026-5","url":null,"abstract":"<div><p>For many SQUID applications robust, compact magnetometers are required with low flux noise and high effective area at 77<!--> <!-->K. Low flux noise is achieved by using a low inductance SQUID. A low inductance SQUID will also have a high transfer function, allowing simplified direct readout schemes to be used. For maximum field sensitivity the SQUID needs to be coupled to a pickup loop of large area and therefore large inductance. We have modelled, designed and fabricated a novel HTS magnetometer consisting of a low inductance (&lt;16<!--> <!-->pH) dc SQUID coupled to a 28<!--> <!-->nH pickup loop flux transformer fabricated on the same 1<!--> <!-->cm² substrate. Efficient coupling was achieved by using a flip-chipped intermediate flux transformer. This configuration produces a magnetometer with a high sensitivity per unit area. The magnetometers incorporate PrBa₂Cu₃O₇ isolation layers and two 2<!--> <em>μ</em>m diameter CAM variant junctions. Thick YBa₂Cu₃O₇<span> layers were used to improve coupling and decrease the demagnetisation factor wherever possible. Our device had a transfer function of 913</span> <em>μ</em>V/<em>Φ</em>₀ which allows direct readout without any matching or additional positive feedback arrangements. The measured effective area at 77<!--> <!-->K was 0.58<!--> <!-->mm² (3.6<!--> <!-->nT/<em>Φ</em>₀). The magnetometer white noise was 18<!--> <!-->fT/<span><math><mtext>Hz</mtext></math></span> and at 1<!--> <!-->Hz was 380<!--> <!-->fT/<span><math><mtext>Hz</mtext></math></span>. This was reduced at 1<!--> <!-->Hz to 120<!--> <!-->fT/<span><math><mtext>Hz</mtext></math></span> using bias reversal. The measured white noise was higher than the design value and is largely due to Johnson noise from the PrBa₂Cu₃O₇ isolation layer used in our devices.</p></div>","PeriodicalId":100110,"journal":{"name":"Applied Superconductivity","volume":"6 10","pages":"Pages 663-667"},"PeriodicalIF":0.0,"publicationDate":"1999-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1016/S0964-1807(99)00026-5","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84064013","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Fabrication of NbN/AlN/NbN junctions with Al embedding circuits on Si membrane for 1.5 THz SIS mixers","authors":"J.-C Villégier ,&nbsp;B Delaet ,&nbsp;V Larrey ,&nbsp;M Salez ,&nbsp;Y Delorme ,&nbsp;J.-M Munier","doi":"10.1016/S0964-1807(99)00009-5","DOIUrl":"10.1016/S0964-1807(99)00009-5","url":null,"abstract":"<div><p>A process has been developed to fabricate NbN tunnel junctions and 1.5<!--> <span>THz SIS mixers with Al electrodes and Al/SiO</span>₂/Al microstrip tuning circuits on thin Si membranes patterned on silicon on insulator wafers (SIMOX). High Josephson current density (<em>J</em>_c up to 2×10⁴ <!-->A/cm²) NbN/AlN/NbN and NbN/MgO/NbN SIS junctions have been fabricated with a reasonably good <em>V</em>_m quality factor and energy gap values close to 5<!--> <!-->meV at 4.2<!--> <!-->K on (100) oriented 3<!--> <!-->inches SIMOX wafers covered by a thin (∼8<!--> <span><span><span>nm) MgO buffer layer. The sputtering conditions critically influence the </span>dielectric quality of both </span>AlN and MgO tunnel barriers as well as the surface losses of NbN electrodes. 0.6-</span><em>μ</em>m Si/SiO₂ membranes are obtained after processing of a whole wafer and etching the individual chips in EDP. Such a technology is applied to the development of a waveguide/membrane SIS mixer for use around 1.5<!--> <!-->THz.</p></div>","PeriodicalId":100110,"journal":{"name":"Applied Superconductivity","volume":"6 10","pages":"Pages 541-545"},"PeriodicalIF":0.0,"publicationDate":"1999-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1016/S0964-1807(99)00009-5","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"91435177","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"High-speed testing of Josephson logic circuits by an on-chip signal-pattern generator","authors":"Y Hashimoto,&nbsp;S Yorozu,&nbsp;H Numata,&nbsp;M Koike,&nbsp;M Tanaka,&nbsp;S Tahara","doi":"10.1016/S0964-1807(99)00049-6","DOIUrl":"10.1016/S0964-1807(99)00049-6","url":null,"abstract":"<div><p>We have developed an on-chip signal-pattern generator (SPG) for high-speed testing of latching-type Josephson logic circuits. The basis of the SPG is using a feedback shift register, in which the complement output of the last-stage LATCH gate (a D flip-flop) is fed back to the first-stage LATCH gate. Since the SPG consists of only LATCH gates and requires no external input signal, the design and high-speed operation are greatly simplified. We performed a high-speed measurement of the 1-bit SPG and found that the SPG has the potential to operate at a speed of more than 4.6<!--> <!-->GHz. We also demonstrated a high-speed testing of a 2-bit logic circuit with the 2-bit SPG up to a clock frequency of 1<!--> <!-->GHz.</p></div>","PeriodicalId":100110,"journal":{"name":"Applied Superconductivity","volume":"6 10","pages":"Pages 823-828"},"PeriodicalIF":0.0,"publicationDate":"1999-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1016/S0964-1807(99)00049-6","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74362563","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Signal amplification and signal to noise ratio improvements in thermally switching SQUIDs","authors":"Andrew D Hibbs,&nbsp;Brian R Whitecotton","doi":"10.1016/S0964-1807(99)00002-2","DOIUrl":"10.1016/S0964-1807(99)00002-2","url":null,"abstract":"<div><p><span><span>The response of the circulating screening current to applied magnetic flux in a variety of DC SQUIDs has been studied in a regime in which thermal noise induces rapid switching between the </span>internal flux states of the SQUID. We observe an unexpected jump of 10 dB to 25 dB in the amplitude and </span>signal to noise ratio (SNR) at the output of the SQUID in response to input signals of frequency below the knee of the switching spectrum. The magnitude of the gain in SNR has been measured as a function of both barrier height and energy difference between local minima of the SQUID energy potential revealing new features of SQUID behavior. A new analysis is put forth for the DC SQUID which is able to reproduce the key features of these observations.</p></div>","PeriodicalId":100110,"journal":{"name":"Applied Superconductivity","volume":"6 10","pages":"Pages 495-499"},"PeriodicalIF":0.0,"publicationDate":"1999-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1016/S0964-1807(99)00002-2","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74097627","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Experimental investigation of RSFQ circular shift registers","authors":"Cesar A. Mancini ,&nbsp;Nada Vukovic ,&nbsp;Mark F. Bocko ,&nbsp;Marc J. Feldman ,&nbsp;Andrea M. Herr","doi":"10.1016/S0964-1807(99)00046-0","DOIUrl":"10.1016/S0964-1807(99)00046-0","url":null,"abstract":"<div><p>Circular shift registers (CSRs) can be used in the implementation of superconducting digital signal processing blocks requiring the storage of data that needs to be accessed periodically with short access times and high throughput rate. The clock distribution networks of these shift registers has the unique constraint that the overall clock skew must be zero. Centered around this requirement, a design methodology for the design of these circuits has previously been developed and presented, resulting in three different designs for 64-bit versions of CSRs. We now present experimental results of the functional testing of two of these designs. These results show correct operation up to 13<!--> <!-->GHz and set an important step for the complete validation of the design methodology presented earlier.</p></div>","PeriodicalId":100110,"journal":{"name":"Applied Superconductivity","volume":"6 10","pages":"Pages 805-808"},"PeriodicalIF":0.0,"publicationDate":"1999-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1016/S0964-1807(99)00046-0","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"87080409","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Characteristics of Nb junctions with additional Al/AlOx","authors":"Hideyuki Sugiyama,&nbsp;Keiichi Kobata,&nbsp;Akira Fujimaki,&nbsp;Hisao Hayakawa","doi":"10.1016/S0964-1807(98)00048-9","DOIUrl":"10.1016/S0964-1807(98)00048-9","url":null,"abstract":"<div><p>We systematically investigated the characteristics of Nb/Al/AlO_<em>x</em>/Al/AlO_<em>x</em>/Nb junctions having a structure in which Al/AlO_<em>x</em> films are placed in a Nb/Al/AlO_<em>x</em><span>/Nb trilayer junction. The junction characteristics reflect superconductivity in the second Al film due to the proximi</span><strong>ty effect. As a result, the critical current density</strong> <em>J</em>_c<span> and the hysteresis on its current–voltage (</span><em>I</em>–<em>V</em>) curve strongly depend on the transparencies of the AlO_<em>x</em> barriers. The hystereses of the junctions are smaller than t<strong>hose of Nb/Al/AlO</strong>_<em>x</em>/Nb junctions at the same <em>J</em>_c. Intrinsically overdamped junctions are also realized. The intrinsically overdamped junctions can considerably reduce an area occupied by a single gate. Furthermore, the spread of critical current <em>I</em>_c for the junctions, which have hystereses, connected in series, is ±1.2%. This shows that the junctions with additional Al/AlO_<em>x</em> have uniform enough characteristics to be used in integrated circuits.</p></div>","PeriodicalId":100110,"journal":{"name":"Applied Superconductivity","volume":"6 10","pages":"Pages 483-489"},"PeriodicalIF":0.0,"publicationDate":"1999-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1016/S0964-1807(98)00048-9","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80238166","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Electrical properties of Y1Ba2Cu3Ox films grown by liquid phase epitaxy","authors":"S Miura,&nbsp;K Hashimoto,&nbsp;T Inoue,&nbsp;K Muranaka,&nbsp;J.G Wen,&nbsp;K Suzuki,&nbsp;Y Enomoto,&nbsp;T Morishita","doi":"10.1016/S0964-1807(98)00108-2","DOIUrl":"10.1016/S0964-1807(98)00108-2","url":null,"abstract":"<div><p>Y₁Ba₂Cu₃O_<em>x</em><span> films were grown on MgO(100) substrates by liquid phase epitaxy and their structural and electrical properties were examined. From transmission electron microscopy (TEM) plan-view images, it was found that the films consisted of large grains whose misorientation angles were less than 1°. Although d.c. critical current density values decreased with increasing film thickness, even a 7</span> <em>μ</em>m-thick film showed the value of 9×10⁵ A/cm² at 77<!--> <!-->K. An rf first penetration field of the film is estimated to be 30 Oe at 10.8 GHz and 77<!--> <!-->K, by using a microstrip line resonator with a resonant frequency of 10.8 GHz. The third-order intercept point of the resonator is at an input power of +43 dBm and output power of +30 dBm at 77<!--> <!-->K. These results suggest that LPE grown Y₁Ba₂Cu₃O_<em>x</em> films have superior d.c. and rf electrical properties.</p></div>","PeriodicalId":100110,"journal":{"name":"Applied Superconductivity","volume":"6 7","pages":"Pages 409-415"},"PeriodicalIF":0.0,"publicationDate":"1998-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1016/S0964-1807(98)00108-2","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"78748282","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Metal/ferroelectric/superconductor field effect transistor using Pb(Zr0.52Ti0.48)O3/(Y0.6Pr0.4)Ba2Cu3O7-y heterostructures","authors":"Shigeki Hontsu ,&nbsp;Junya Ishii ,&nbsp;Masaya Nakamori ,&nbsp;Hitoshi Tabata ,&nbsp;Tomoji Kawai ,&nbsp;Akira Fujimaki","doi":"10.1016/S0964-1807(98)00079-9","DOIUrl":"10.1016/S0964-1807(98)00079-9","url":null,"abstract":"<div><p>Metal(Al,Ag,Au)/ferroelectric (Pb(Zr_0.52Ti_0.48)O₃ [PZT])/high-<em>T</em>_c<span> superconductor ((Y</span>_1-<em>x</em> Pr_<em>x</em>)Ba₂Cu₃O_7-<em>y</em><span> [YPBCO]) structures have been fabricated by ArF excimer laser deposition. Ferroelectric properties of </span><em>c</em>-axis oriented epitaxial PZT films on YBa₂Cu₃O_7-<em>y</em>[YBCO]//SrTiO₃3(100) have been studied as a function of temperature in the range of 20–290<!--> <span>K. Samples with three kinds of metal electrode show almost similar ferroelectric properties at 290</span> <span>K. The remanent polarization and coercive field are about 25</span> <em>μ</em>C/cm²<span><span> and 146 kV/cm, respectively. At low temperature, on the contrary, the ferroelectric properties of heterostructures were strongly influenced by the choice of the electrode metal. It seems that these properties are severely affected by </span>interface states of metal PZT. The Au electrode gives rise to the best ferroelectric property of PZT films. We also investigated the ferroelectric field effect in the heterostructures of Au/ PZT/(Y</span>_0.6Pr_0.4)Ba₂Cu₃O_7-<em>y</em>. A large modulation (as much as ∼40%) and memory effects are observed in the low frequency source–drain current response to a pulsed voltage.</p></div>","PeriodicalId":100110,"journal":{"name":"Applied Superconductivity","volume":"6 7","pages":"Pages 367-372"},"PeriodicalIF":0.0,"publicationDate":"1998-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1016/S0964-1807(98)00079-9","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"75918434","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}