Journal of Adhesive Dentistry最新文献_第4页

Does a Self-adhesive Flowable Resin Composite Perform Similarly to Highly Filled and Conventional Flowable Resin Composites in Occlusal Cavities? A 2-year Follow-up Study. 自粘可流动Resin复合材料Perform是否与高填充和传统可流动Resin复合材料相似?为期2年的随访研究。

IF 3.3 3区医学

Journal of Adhesive Dentistry Pub Date : 2021-12-03 DOI: 10.3290/j.jad.b2288205

Fatma Dilsad Oz, Ece Meral, Sevil Gurgan

{"title":"Does a Self-adhesive Flowable Resin Composite Perform Similarly to Highly Filled and Conventional Flowable Resin Composites in Occlusal Cavities? A 2-year Follow-up Study.","authors":"Fatma Dilsad Oz, Ece Meral, Sevil Gurgan","doi":"10.3290/j.jad.b2288205","DOIUrl":"https://doi.org/10.3290/j.jad.b2288205","url":null,"abstract":"Purpose: The aim of this clinical trial was to compare a self-adhesive flowable resin composite, a highly filled flowable resin composite used in combination with a universal adhesive applied in self-etch mode, and a conventional flowable resin composite used in combination with a universal adhesive applied using two different application modes in occlusal cavities.Materials and methods: Twenty-eight patients received 114 occlusal restorations. Cavities were divided into four groups: CS: a self-adhering flowable (Constic, DMG); GF: a highly filled flowable (G-ænial Universal Flo, GC) in combination with a universal adhesive applied in self-etch mode (G-Premio Bond, GC); TF-SE: a conventional flowable (Tetric N-Flow, Ivoclar Vivadent) in combination with a universal adhesive (Tetric N-Bond Universal, Ivoclar Vivadent) applied in self-etch mode; TF-ER: a conventional flowable (Tetric N-Flow, Ivoclar Vivadent) in combination with a universal adhesive (Tetric N-Bond Universal, Ivoclar Vivadent) applied in etch&rinse mode. Restorations were scored using modified USPHS criteria. Descriptive statistics were performed using chi-squared tests.Results: At 24-month evaluations, none of the restorations were lost. The CS group showed significantly higher bravo scores for marginal adaptation than did the other experimental groups (p = 0.024). Significant changes were seen for CS and GF regarding marginal adaptation compared to baseline.Conclusion: Although the self-adhering flowable resin composite exhibited inferior marginal adaptation compared to the highly filled flowable and conventional flowable resin composites, the restored teeth demonstrated a clinically acceptable performance after 24 months.","PeriodicalId":55604,"journal":{"name":"Journal of Adhesive Dentistry","volume":"23 6","pages":"497-503"},"PeriodicalIF":3.3,"publicationDate":"2021-12-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"39766787","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 2

Eight-year Microtensile Bond Strength to Dentin and Interfacial Nanomechanical Properties of a One-step Adhesive. 一步走胶粘剂与牙本质八年微拉伸结合强度及界面纳米力学性能研究。

IF 3.3 3区医学

Journal of Adhesive Dentistry Pub Date : 2021-10-01 DOI: 10.3290/j.jad.b1999815

Keiichi Hosaka, Antonin Tichy, Daisuke Araoka, Wurihan Wurihan, Yo Shibata, Masaomi Ikeda, Celso Afonso Klein, Junji Tagami, Masatoshi Nakajima

{"title":"Eight-year Microtensile Bond Strength to Dentin and Interfacial Nanomechanical Properties of a One-step Adhesive.","authors":"Keiichi Hosaka, Antonin Tichy, Daisuke Araoka, Wurihan Wurihan, Yo Shibata, Masaomi Ikeda, Celso Afonso Klein, Junji Tagami, Masatoshi Nakajima","doi":"10.3290/j.jad.b1999815","DOIUrl":"https://doi.org/10.3290/j.jad.b1999815","url":null,"abstract":"Purpose: To evaluate the microtensile bond strength (µTBS) of a one-step self-etch adhesive (1-SEA) to dentin and its interfacial nanomechanical properties after 8 years of water storage.Materials and methods: Flat coronal dentin surfaces of extracted human third molars were bonded with a 1-SEA (Clearfil S3 Bond Plus, CS3+) and built up with a hybrid resin composite (Clearfil AP-X). After storage in water for 24 h or 8 years, non-trimmed stick-shaped specimens were fabricated from the central part of each bonded tooth and subjected to the µTBS test at a crosshead speed of 1.0 mm/min. Failure modes and the morphology of debonded interfaces were analyzed using a scanning electron microscope (SEM). In addition, the elastic modulus (E) and hardness (H) of the adhesive layer and the resin composite were determined by an instrumented nanoindentation test. The acquired µTBS, E, and H data were statistically analyzed using t-tests to examine the effect of storage time (α = 0.05).Results: The 8-year µTBS was slightly lower than that after 24 h, but the difference was not significant (p = 0.123). The SEM observation of debonded surfaces after 8 years revealed extrusions and lacunas. E and H of the adhesive layer and the resin composite significantly decreased over the 8-year water storage (p < 0.001).Conclusions: Although 8 years of water storage did not decrease the µTBS of CS3+ significantly, the observed failure mode patterns and significantly decreased nanomechanical properties indicated resin degradation of the adhesive and the resin composite.","PeriodicalId":55604,"journal":{"name":"Journal of Adhesive Dentistry","volume":"23 5","pages":"461-467"},"PeriodicalIF":3.3,"publicationDate":"2021-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"39440591","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 2

The Origins of Acrylates and Adhesive Technologies in Dentistry. 牙科中丙烯酸酯和粘合剂技术的起源。

IF 3.3 3区医学

Journal of Adhesive Dentistry Pub Date : 2021-10-01 DOI: 10.3290/j.jad.b2000209

Hans Jörg Staehle, Caroline Sekundo

{"title":"The Origins of Acrylates and Adhesive Technologies in Dentistry.","authors":"Hans Jörg Staehle, Caroline Sekundo","doi":"10.3290/j.jad.b2000209","DOIUrl":"https://doi.org/10.3290/j.jad.b2000209","url":null,"abstract":"Purpose: To examine the origins of acrylates and adhesive dentistry up to 1955.Materials and methods: A search of MEDLINE database and a manual literature search were conducted to find relevant articles.Results: Acrylic acid was discovered in 1843, methacrylic acid in 1865. In 1880, light polymerization of acrylate compounds using glass prisms was introduced. In 1928, polymethyl methacrylate (PMMA) was industrially produced from methyl methacrylate (MMA). In 1930, PMMA moldings that could be adapted under heat and pressure were introduced into dentistry. The process was improved in 1936 by mixing pulverized PMMA and liquid MMA. In 1940, the intraoral polymerization of dental resins using UV light or catalysts was discovered. In the same year, the combined procedure (dual-curing) and addition of inorganic fillers to improve the material properties (precursors of composites) were proposed. Effects on the oxygen inhibition layer and intraoral bonding between several resin portions were also described. In 1942, direct restorations with self-curing resins (combined with a precursory version of cavity sealing) were described. These new resins were marketed in the late 1940s. Intraoral repair of restorations and cementation of crowns and bridges with resins were also described in 1942. In 1949, a glycerophosphoric acid-based sealer was marketed. In the same year, it was discovered that etching of the enamel (with nitric acid) caused an adhesion to thin layers of acrylic-based materials. In 1955, phosphoric acid etching of enamel was shown to improve adhesion.Conclusion: In the first half of the 20th century, important but little or unknown discoveries took place. These discoveries can improve our understanding of how adhesive dentistry evolved.","PeriodicalId":55604,"journal":{"name":"Journal of Adhesive Dentistry","volume":"23 5","pages":"397-406"},"PeriodicalIF":3.3,"publicationDate":"2021-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"39438181","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 5

Editorial: The Future of JAD - Gold or Green? 评论:JAD的未来-黄金还是绿色?

IF 3.3 3区医学

Journal of Adhesive Dentistry Pub Date : 2021-10-01 DOI: 10.3290/j.jad.b1999799

Roland Frankenberger, Bart Van Meerbeek

引用次数: 0

Effect of Airborne-Particle Abrasion Protocols and MDP-based Primer on the Bond Strength of Highly Translucent Zirconia. Effect的Airborne-Particle磨损方案和基于mdp的底漆对高半透明氧化锆的结合强度。

IF 3.3 3区医学

Journal of Adhesive Dentistry Pub Date : 2021-10-01 DOI: 10.3290/j.jad.b2000249

Yuhuan Xiong, Peng Zhao, Chunxiao Jin, Jingrong Wang, Dwayne Arola, Shanshan Gao

{"title":"Effect of Airborne-Particle Abrasion Protocols and MDP-based Primer on the Bond Strength of Highly Translucent Zirconia.","authors":"Yuhuan Xiong, Peng Zhao, Chunxiao Jin, Jingrong Wang, Dwayne Arola, Shanshan Gao","doi":"10.3290/j.jad.b2000249","DOIUrl":"https://doi.org/10.3290/j.jad.b2000249","url":null,"abstract":"Purpose: To evaluate the effects of airborne-particle abrasion and MDP (methacryloyloxydecyl dihydrogen phosphate)-based primer treatment on the strength of resin bonds to highly translucent zirconia.Materials and methods: Eight groups (n = 20 per group) of specimens were prepared with airborne-particle abrasion treatments (0.1-, 0.3-, or 0.6-MPa pressure) or not (untreated control) and MDP-based primer (treated) or not (untreated). Shear bond strength (SBS) tests were performed on the composite-to-ceramic bonded specimens either with or without thermocycling. After airborne-particle abrasion, the surface topography was evaluated by white light interferometry, and a phase analysis was conducted with x-ray diffraction (XRD). Surface roughness (Ra), surface energy (SE), and SBS measurements were statistically analyzed using either Tukey's HSD or the Kruskal-Wallis test, based on applicability. Lastly, the failure mode was observed by optical microscope and scanning electron microscope.Results: Airborne-particle abrasion resulted in significantly larger Ra (p < 0.05), especially with higher treatment pressures. Treatment with MDP-based primer caused significantly higher SE and SBS than airborne-particle abrasion alone (p < 0.05), both with and without aging.Conclusion: MDP-based primer can enhance the bond strength and reduce hydrolytic aging of the bonded interface for highly translucent zirconia, exceeding the effects of airborne-particle abrasion. It is recommended that MDP-based primer treatment be applied with a composite cement containing adhesive phosphate monomer.","PeriodicalId":55604,"journal":{"name":"Journal of Adhesive Dentistry","volume":"23 5","pages":"437-446"},"PeriodicalIF":3.3,"publicationDate":"2021-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"39440589","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 5

Effect of Different Surface Treatments on the Bond Strength of the Hybrid Ceramic Characterization Layer. 不同表面处理对杂化陶瓷表征层结合强度的影响。

IF 3.3 3区医学

Journal of Adhesive Dentistry Pub Date : 2021-10-01 DOI: 10.3290/j.jad.b2000235

Manassés Tercio Vieira Grangeiro, Natalia Rivoli Rossi, Larissa Araújo Lopes Barreto, Marco Antonio Bottino, João Paulo Mendes Tribst

{"title":"Effect of Different Surface Treatments on the Bond Strength of the Hybrid Ceramic Characterization Layer.","authors":"Manassés Tercio Vieira Grangeiro, Natalia Rivoli Rossi, Larissa Araújo Lopes Barreto, Marco Antonio Bottino, João Paulo Mendes Tribst","doi":"10.3290/j.jad.b2000235","DOIUrl":"https://doi.org/10.3290/j.jad.b2000235","url":null,"abstract":"Purpose: Using the microshear bond strength (µSBS) test, this study investigated the bond strength between a hybrid ceramic and the extrinsic characterization layer after different ceramic surface treatments.Materials and methods: Hybrid ceramic blocks (Vita Enamic, Vita Zahnfabrik) were sectioned and randomly divided into 4 groups (N = 120) according to the surface treatment and aging (n = 15): P: polishing; E: acid etching with HF; A: aluminum oxide blasting; S: self-etching ceramic primer. The specimens were silanized, then cylinders of light-curing characterization material (Vita Enamic Stain, 1.6 mm diameter x 2 mm height) were fabricated, followed by glazing. The specimens were subsequently immersed in distilled water for 24 h and subjected to the µSBS test using a universal testing machine (load cell 0.5 mm/min, 50 kgf) or tested after thermocycling for 10,000 cycles in water (5°C-55°C). After treatment, the specimen surfaces were analyzed using SEM, with failure types defined as adhesive, predominantly adhesive, or cohesive. The data were analyzed by two-way ANOVA followed by Tukey's test (p < 0.05).Results: The most frequent failure type was predominantly adhesive between ceramic and the characterization layer. There were statistically significant differences between the surface treatments (p < 0.05). Thermocycling did not lead to statistically signifcant different results (p > 0.05). For groups P and A, a sharp decrease in SBS was observed.Conclusion: The absence of surface treatment drastically reduced the microshear bond strength between the ceramic and the characterization layer. Conditioning with 5% hydrofluoric acid for 60 s is the most suitable treatment for adhesion of the characterization layer to hybrid ceramic.","PeriodicalId":55604,"journal":{"name":"Journal of Adhesive Dentistry","volume":"23 5","pages":"429-435"},"PeriodicalIF":3.3,"publicationDate":"2021-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"39438184","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 7

Composite Cement Components Stabilize the Bond between a Lithium-Disilicate Glass-Ceramic and the Titanium Abutment. 复合水泥组件稳定锂-二硅酸玻璃陶瓷与钛基台之间的结合。

IF 3.3 3区医学

Journal of Adhesive Dentistry Pub Date : 2021-10-01 DOI: 10.3290/j.jad.b2000265

Han-Gyul Sung, Kyung-Ho Ko, Chan-Jin Park, Lee-Ra Cho, Yoon-Hyuk Huh

{"title":"Composite Cement Components Stabilize the Bond between a Lithium-Disilicate Glass-Ceramic and the Titanium Abutment.","authors":"Han-Gyul Sung, Kyung-Ho Ko, Chan-Jin Park, Lee-Ra Cho, Yoon-Hyuk Huh","doi":"10.3290/j.jad.b2000265","DOIUrl":"https://doi.org/10.3290/j.jad.b2000265","url":null,"abstract":"Purpose: To evaluate the effect of composite cement components and thermocycling on the bond strength of monolithic lithium-disilicate (LS2) glass-ceramic implant-supported restorations bonded to titanium (Ti) abutments.Materials and methods: Eighty LS2 blocks were treated with five types of composite cement and primer, then divided accordingly into groups: M (Multilink hybrid abutment), G (G-CEM LinkAce), GP (G-CEM LinkAce with G-Multi PRIMER), P (Panavia F2.0), and U (RelyX U200). Half of the 16 specimens from each group were subjected to thermocycling (groups T-M, T-G, T-GP, T-P, and T-U). The tensile bond strength (TBS) of all specimens was measured using a pull-off test. The cross section of the LS2 block from which the Ti abutment was removed was examined for mode of failure. Two-way ANOVA and Tukey's HSD test (significance level = 0.05) were used to determine the effect of composite cement composition and thermocycling on TBS.Results: There was no difference in TBS between the five groups before thermocycling (p = 0.16). However, groups M (p < 0.001) and G (p = 0.014) showed significantly lower TBS than the corresponding thermocycled groups. Groups T-GP, T-P, and T-U did not show significant changes in TBS after thermocycling (p > 0.05). All failures occurred at the interface between the composite cement and Ti abutment and not between the cement and the LS2 block.Conclusion: Thermocycling can reduce the bond strength between the composite cements and Ti abutment. The composite cements containing 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) or methacrylate phosphate ester monomers stabilize bonding.","PeriodicalId":55604,"journal":{"name":"Journal of Adhesive Dentistry","volume":"23 5","pages":"469-475"},"PeriodicalIF":3.3,"publicationDate":"2021-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"39440592","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 4

24-Month Clinical Performance of a Universal Adhesive on Non-Carious Cervical Lesions: Self-Etch and Etch-and-Rinse Techniques. 一种通用黏合剂治疗宫颈非龋齿病变的24个月临床表现:自蚀刻和蚀刻-冲洗技术。

IF 3.3 3区医学

Journal of Adhesive Dentistry Pub Date : 2021-10-01 DOI: 10.3290/j.jad.b2000173

Joana Cruz, Ana Luisa Silva, Raquel Eira, Catarina Coito, Bernardo Romão Sousa, Maria Manuela Lopes, Alexandre Cavalheiro

{"title":"24-Month Clinical Performance of a Universal Adhesive on Non-Carious Cervical Lesions: Self-Etch and Etch-and-Rinse Techniques.","authors":"Joana Cruz, Ana Luisa Silva, Raquel Eira, Catarina Coito, Bernardo Romão Sousa, Maria Manuela Lopes, Alexandre Cavalheiro","doi":"10.3290/j.jad.b2000173","DOIUrl":"https://doi.org/10.3290/j.jad.b2000173","url":null,"abstract":"Purpose: To evaluate the 24-month clinical performance of Adhese Universal (ADH) (Ivoclar Vivadent) using two different application modes (etch-and-rinse vs self-etch) when restoring non-carious cervical lesions.Materials and methods: Twenty-six patients participated in this study. A total of 117 non-carious cervical lesion restorations (N = 117) were assigned to two groups: 1) ADH in the etch-and-rinse mode (n = 59) and 2) ADH in the self-etch mode (n = 58). The same resin composite (Tetric EvoCeram, Ivoclar Vivadent) was used for all restorations. The restorations were evaluated at baseline and at 24 months using the World Dental Federation (FDI) criteria. The results were analyzed statistically using the McNemar test (α = 0.05) and a generalized estimating equation.Results: In self-etch mode, significant differences were found for marginal coloring (p = 0.002), marginal adaptation (p = 0.031), and hypersensitivity (p = 0.031) between baseline and the end of the 24-month period. In the etch-and-rinse mode, significant differences were found for marginal coloring (p = 0.004), fractures/retention (p = 0.002), marginal adaptation (p = 0.002), and hypersensitivity (p = 0.000). Significant differences were also detected between groups at 24 months for fractures/retention (p = 0.001). At 24 months, 10 restorations of the etch-and-rinse group were lost and 2 restorations of the self-etch group were lost.Conclusion: In terms of fractures and retention criteria, this universal adhesive obtained better results when applied in self-etch mode than in etch-and-rinse mode.","PeriodicalId":55604,"journal":{"name":"Journal of Adhesive Dentistry","volume":"23 5","pages":"379-387"},"PeriodicalIF":3.3,"publicationDate":"2021-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"39438179","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 4

Influence of Different Application Methods on the Bonding Effectiveness of Universal Adhesives to Dentin in the Early Phase. 不同应用方法对Dentin早期通用胶粘剂粘接效果的影响。

IF 3.3 3区医学

Journal of Adhesive Dentistry Pub Date : 2021-10-01 DOI: 10.3290/j.jad.b2000257

Munenori Yokoyama, Toshiki Takamizawa, Tomohiko Tamura, Yoshihiro Namura, Akimasa Tsujimoto, Wayne W Barkmeier, Mark A Latta, Masashi Miyazaki

{"title":"Influence of Different Application Methods on the Bonding Effectiveness of Universal Adhesives to Dentin in the Early Phase.","authors":"Munenori Yokoyama, Toshiki Takamizawa, Tomohiko Tamura, Yoshihiro Namura, Akimasa Tsujimoto, Wayne W Barkmeier, Mark A Latta, Masashi Miyazaki","doi":"10.3290/j.jad.b2000257","DOIUrl":"https://doi.org/10.3290/j.jad.b2000257","url":null,"abstract":"Purpose: To investigate the changes in the dentin bond strengths of universal adhesives during the early phase and evaluate the effect of a double-layer adhesive application on the performance of the dentin bond.Materials and methods: Three universal adhesives and a two-step self-etch adhesive were employed to ascertain the shear bond strengths (SBS) of specimens to bovine dentin with the use of the etch-and-rinse or self-etch mode. The specimens were further divided into two groups based on adhesive application in a single or a double layer. The bonded specimens were stored in distilled water at 37°C for 5 min or 1, 6, 12, or 24 h prior to SBS measurement and the adhesives' Knoop hardness number (KHN).Results: All the adhesives showed increased SBS with prolonged storage periods regardless of the adhesive layer (single or double) or etching mode. Most universal adhesives in the double adhesive layer groups showed significantly higher SBS than single adhesive layer groups for the same storage period. All the adhesives also showed increased KHN with increased storage period.Conclusion: The SBS and KHN values of the adhesives increased with increasing storage duration over a 24-h period. Double adhesive layer application mediated increased dentin bond strength in the early phase.","PeriodicalId":55604,"journal":{"name":"Journal of Adhesive Dentistry","volume":"23 5","pages":"447-459"},"PeriodicalIF":3.3,"publicationDate":"2021-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"39440590","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 9

Bulk-fill Composites Compared to a Nanohybrid Composite in Class-II Cavities - A Two-year Follow-Up Study. 体填充复合材料与纳米复合材料在ii类空腔中的比较——一项为期两年的随访研究。

IF 3.3 3区医学

Journal of Adhesive Dentistry Pub Date : 2021-10-01 DOI: 10.3290/j.jad.b2000185

Lea Hoffmann, Cornelia Neuerer, Katrin Heck, Karl-Heinz Kunzelmann

{"title":"Bulk-fill Composites Compared to a Nanohybrid Composite in Class-II Cavities - A Two-year Follow-Up Study.","authors":"Lea Hoffmann, Cornelia Neuerer, Katrin Heck, Karl-Heinz Kunzelmann","doi":"10.3290/j.jad.b2000185","DOIUrl":"https://doi.org/10.3290/j.jad.b2000185","url":null,"abstract":"Purpose: To compare different concepts of direct composite restorations in class-II cavities using bulk-fill composites and a conventional composite with different layer thicknesses in a clinical study over a period of 2 years.Materials and methods: A low-viscosity (SDR), a high-viscosity bulk-fill (Tetric EvoCeram Bulk Fill) and a conventional nanohybrid composite (Tetric EvoCeram) were randomly assigned and placed in different layer thicknesses up to 4 mm in 160 class-II cavities in 94 patients. Restorations were clinically examined at baseline (n = 160), after 12 (n = 150) and 24 months (n = 148) and evaluated according to eight selected FDI criteria. In case of complete loss of the restoration or irreversible pulpitic symptoms, the restoration was rated as failure; repair was considered as relative failure.Results: The materials investigated showed no significant differences regarding the FDI scores and failure rate during the entire follow-up. After 12 months, 7 failures and after 24 months a total of 8 failures were observed. After 2 years, Tetric EvoCeram Bulk Fill with a 4-mm layer thickness and SDR in combination with Tetric EvoCeram Bulk Fill with a 2-mm layer thickness exhibited a non-significant tendency towards increased hypersensitivity (FDI score 5) as compared to the reference material Tetric EvoCeram with a 2-mm layer thickness (p = 0.051; Kruskal-Wallis test).Conclusion: The clinical stability of bulk-fill materials in layers up to 4 mm is comparable to nanohybrid composites after 2 years.","PeriodicalId":55604,"journal":{"name":"Journal of Adhesive Dentistry","volume":"23 5","pages":"389-396"},"PeriodicalIF":3.3,"publicationDate":"2021-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"39438180","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 2