Energies最新文献

{"title":"Multi-Scenario Research on the Coupled and Coordinated Development of the Economic–Energy–Environmental (3E) System under the Reconstruction of the Power System—New Exploration Based on the “Dual Triangle” Theory","authors":"Haifeng Cen, Wenxiu Wang, Liping Chen, Weitao Hao, Zhe Guan, Juntong Lu, Guotian Cai","doi":"10.3390/en17143468","DOIUrl":"https://doi.org/10.3390/en17143468","url":null,"abstract":"Under the background of building a new-type power system, as the core of the energy system, the restructuring of the power system will inevitably have a linked impact on the coordinated development of the economy–energy–environment system. A “Dual Triangle” theoretical framework consisting of the “Energy Impossibility Triangle” and “Sustainable Development Triangle” was constructed in this paper. By combining historical statistical analysis with scenario predictive analysis, the historical characteristics of the “Dual Triangle” and future trends under different scenarios were analyzed, and the coupled interaction relationship of the “Dual Triangle” was also studied. Conclusions were as follows: The energy system gradually inclined towards economy and cleanliness from 2010 to 2022, and the operation status of the “Dual Triangle” was stable. A positive coupling relationship within the “Dual Triangle” in vigorously promoting renewable energy scenarios is close, which can be regarded as the preferred path for the reconstruction of the power system. The security and low-carbon phased development scenario is a development model that dynamically mitigates the challenges of the “Energy Impossibility Triangle”. Security has become the core contradiction of the “Energy Impossibility Triangle”. This paper conducts an integrated and innovative application of the “Dual Triangle” theory and provides a case basis for how to achieve the coupled interaction of the “Dual Triangle”.","PeriodicalId":504870,"journal":{"name":"Energies","volume":"39 5","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141650236","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Optimal Power Model Predictive Control for Electrochemical Energy Storage Power Station","authors":"Chong Shao, Chao Tu, Jiao Yu, Mingdian Wang, Cheng Wang, Haiying Dong","doi":"10.3390/en17143456","DOIUrl":"https://doi.org/10.3390/en17143456","url":null,"abstract":"Aiming at the current power control problems of grid-side electrochemical energy storage power station in multiple scenarios, this paper proposes an optimal power model prediction control (MPC) strategy for electrochemical energy storage power station. This method is based on the power conversion system (PCS) grid-connected voltage and current to establish a power prediction model for energy storage power stations, achieving a one-step prediction of the power of the power station. The power prediction error is used as a power regulation feedback quantity to correct the reference power input. Considering the state of charge (SOC) constraint of the battery, partition the SOC into different states. Using SOC as the power regulation feedback, the power of the battery compartment can be adjusted according to the range of the battery SOC to prevent SOC from exceeding the limit value, simultaneously calculating the power loss of the energy storage power station to improve the energy efficiency. The objective function is to minimize the power deviation and power loss of the power station. By solving the objective function, the optimal switching voltage vector of the converter output is achieved to achieve optimal power control of the energy storage power station. The simulation results in various application scenarios of the energy storage power station show that the proposed control strategy enables the power of the storage station to quickly and accurately track the demand of grid scheduling, achieving the optimal power control of the electrochemical energy storage power station.","PeriodicalId":504870,"journal":{"name":"Energies","volume":"34 21","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141651051","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Model-Based Thermal Stress and Lifetime Estimation of DFIG Wind Power Converter","authors":"Xinming Yu, Francesco Iannuzzo, Dao Zhou","doi":"10.3390/en17143451","DOIUrl":"https://doi.org/10.3390/en17143451","url":null,"abstract":"Abstract: Turbine systems equipped with doubly fed induction generation (DFIG) are becoming increasingly vital in wind power generation, with the reliability of the devices serving as a pillar in the industrial sector. Thermal stress and lifetime assessment are fundamental indicators in this regard. This paper primarily addresses the thermal stress and lifespan of power semiconductor devices utilized in a DFIG grid-side converter (GSC) and rotor-side converter (RSC). PLECS (Piecewise Linear Electrical Circuit Simulation) is employed to validate the electrical and thermal stress of the power devices. Additionally, Ansys Icepak, a finite element analysis (FEA) software, is utilized to confirm temperature fluctuations under various operations. The power consumption and junction temperature of the power devices in the GSC and RSC of a 2 MW DFIG are compared. It is evident that the most stressed power semiconductor is the IGBT for the GSC with a temperature swing of 3.4 °C, while the diode in the RSC is the most stressed with a temperature swing of 10.1 °C. This paper also presents a lifetime model to estimate the lifespan of the power device based on the annual wind profile. By considering the annual mission profile, we observe that the lifetime of the back-to-back power converter is limited by the diode of the RSC, whose B10 lifetime is calculated at 15 years.","PeriodicalId":504870,"journal":{"name":"Energies","volume":"50 21","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141652193","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Thermochemical Valorization of Plastic Waste Containing Low Density Polyethylene, Polyvinyl Chloride and Polyvinyl Butyral into Thermal and Fuel Energy","authors":"Beata Jabłońska, Gabriela Poznańska, Paweł Jabłoński, Joanna Zwolińska","doi":"10.3390/en17143458","DOIUrl":"https://doi.org/10.3390/en17143458","url":null,"abstract":"Pyrolysis is a promising technology for transforming waste plastics (WPs) into high-value products. In the near future it will play a key role in the circular economy, as a sustainable and environmentally friendly method of managing this waste. Although the literature reports on the pyrolysis of plastics, it is focused on pure polymers. On the other hand, the state-of-the-art knowledge about the pyrolysis of mixed and contaminated WPs is still scarce. Industrial waste processing usually uses polymer mixtures containing various impurities that influence the pyrolysis process during chemical WPs recycling. In the paper the pyrolysis of three types of WPs: low density polyethylene (LDPE), polyvinyl chloride (PVC) and polyvinyl butyral (PVB) from repeated mechanical recycling of plastics, as well as their binary and ternary mixtures, is considered. The influence of particular components on the pyrolysis process is analyzed. The aim is to determine synergistic behavior of the mixtures during the pyrolysis process, which is important for increasing the efficiency and quality of the obtained bioproducts. Methods such as thermogravimetric (TG/DTG) analysis coupled with Fourier transform infrared spectroscopy (FTIR) and mass spectroscopy (MS) are used. The variations in the initial and final temperature of pyrolysis, mass loss and mass loss rate are determined. The content of PVC significantly lowers the initial temperature and mass loss and increases the final temperature. The pyrolysis of the considered mixtures shows a noticeable synergism—in the initial stage of pyrolysis up to a temperature around 450 °C, the mass loss is accelerated compared to what is predicted by simple superposition. The inhomogeneity of the mixtures as well as the waste origin causes a significant variation in the activation energy. Three main conclusions are obtained: (i) if the waste does not contain PVC, the pyrolysis is nearly complete at a temperature around 500 °C at a heating rate of 10 °C/min, whereas PVC is not fully processed even at 995 °C; (ii) the synergistic effects affect significantly the pyrolysis process by accelerating some steps and lowering the activation energy; and (iii) the presence of PVC noticeably lowers the temperature of the first stage of PVB pyrolysis. The investigation results prove that chemical recycling of mixed LDPE, PVC and PVB waste can be an effective method of plastic waste management.","PeriodicalId":504870,"journal":{"name":"Energies","volume":"23 16","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141651465","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"The Impact of Various Factors on Long-Term Storage of Biodiesel and Its Prevention: A Review","authors":"Wenbo Ai, H. Cho, Md. Iqbal Mahmud","doi":"10.3390/en17143449","DOIUrl":"https://doi.org/10.3390/en17143449","url":null,"abstract":"With the continuous growth of global energy demand and increasingly prominent environmental issues, the research and utilization of renewable energy as a substitute for traditional fossil fuels have gained significant importance. Biofuels, recognized as a key renewable energy source, are widely considered a viable alternative to fossil fuels. The primary component of biodiesel is fatty acid methyl esters (FAMEs), which are prone to oxidative degradation due to their unsaturated nature during storage and transportation. Various studies have identified several factors influencing the stability of biodiesel, including oxygen, temperature, light, water content, microbial growth, and the corrosion of metal storage tanks. This article provides a comprehensive summary of the effects of different environmental factors on the storage stability of biodiesel and explores the interrelationships between these factors. To enhance the storage stability of biodiesel, several strategies have been proposed, such as optimizing production processes, adding antioxidants, controlling storage environments, and conducting regular inspections. This review aims to provide a theoretical basis for the long-term storage of biodiesel and promote its widespread application in practical scenarios.","PeriodicalId":504870,"journal":{"name":"Energies","volume":"37 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141650823","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Analysis of a New Asymmetric Biased-Flux Operation for an Inter-Modular Permanent Magnet Motor","authors":"Mohammad Afrank, Mohammad Amirkhani, Ehsan Farmahini Farahani, M. Mirsalim, A. Khorsandi, Nick J. Baker","doi":"10.3390/en17143459","DOIUrl":"https://doi.org/10.3390/en17143459","url":null,"abstract":"Net zero and electrification targets are continuing to enforce a need for the development of high-performance electrical machines, increasingly based on the use of rare earth permanent magnets. Biased flux motors have the potential to overcome some of the disadvantages associated with more conventional electrical machines. Since their introduction, there has been a consistent trend towards new and improved topologies, all relying on the same principles of operation. In this paper, a new alternative operation is proposed where the magnetic flux density offset of each module is different. The resulting asymmetric biased excitations of the magnets leads to a flux concentration in the air gap. Placement of magnets in the slot-opening area is shown to produce a higher average torque at a higher power factor. It is mathematically shown that the conventional methods used to investigate the effect of each group of magnets separately cannot be used for the explanation of this operation principle. Therefore, it is necessary to simultaneously consider both groups of magnets in the magnetic equivalent circuit. Due to the use of magnets in these motors, thermal conditions are also investigated. Finally, a comprehensive comparison between several stator-situated-magnet motors is presented. The performance of the proposed motor is improved in terms of average torque, torque density, PM torque density, power factor, and overload capability. The torque density specifically has increased by 9%. Moreover, both motors have suitable thermal behaviour which confirms the validity of the demagnetization analysis.","PeriodicalId":504870,"journal":{"name":"Energies","volume":"9 8","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141651385","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Bus Basis Model Applied to the Chilean Power System: A Detailed Look at Chilean Electric Demand","authors":"Carlos Benavides, Sebastián Gwinner, Andrés Ulloa, José Barrales-Ruiz, Vicente Sepúlveda, Manuel Díaz","doi":"10.3390/en17143448","DOIUrl":"https://doi.org/10.3390/en17143448","url":null,"abstract":"This paper presents a methodology to forecast electrical demand for the Chilean Electrical Power System considering a national, regional, district and bus spatial disaggregation. The methodology developed was based on different kinds of econometric models and end-use models to represent the massification of low carbon emission technologies such as electromobility, electric heating, electric water heating, and distributed generation. In addition, the methodology developed allows for the projection of the electric demand considering different kinds of clients as regulated and non-regulated clients, and different economic sectors. The model was applied to forecast the long-term electricity demand in Chile for the period 2022–2042 for 207 districts and 474 buses. The results include projections under the base case and low carbon scenarios, highlighting the significant influence of new technologies on future demand.","PeriodicalId":504870,"journal":{"name":"Energies","volume":"51 22","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141651864","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Numerical and Experimental Determination of Selected Performance Indicators of the Liquid Flat-Plate Solar Collector under Outdoor Conditions","authors":"W. Zima, Ł. Mika, K. Sztekler","doi":"10.3390/en17143454","DOIUrl":"https://doi.org/10.3390/en17143454","url":null,"abstract":"The paper proposes applying an in-house mathematical model of a liquid flat-plate solar collector to calculate the collector time constant. The described model, proposed for the first time in an earlier study, is a one-dimensional distributed parameter model enabling simulations of the collector operation under arbitrarily variable boundary conditions. The model is based on the solution of energy balance equations for all collector components. The formulated differential equations are solved iteratively using an implicit difference scheme. To obtain a stable numerical solution, it is necessary to use appropriate steps of time and spatial division. These were found by comparing the results obtained from the model with the results of the analytical solution available in the literature for the transient state, which constitutes the novelty of the present study. The accuracy of the results obtained from the model was verified experimentally by comparing the measured and calculated history of the fluid temperature at the outlet of the collector. The calculation of the collector time constant is proposed in the paper as an example of the model’s practical application. The results of the time constant calculation were compared with the values obtained experimentally on the test stand. This is another novelty of the presented research. The analysed collector instantaneous efficiency was then calculated for selected outdoor conditions. The presented mathematical model can also be used to verify the correctness of the collector operation. By comparing, on an ongoing basis, the measured and calculated values of the fluid temperature at the collector outlet, conclusions can be drawn about the process of solar glass fouling or glycol gelling. The simplicity of the model and the low computational demands enable such comparisons in an online mode.","PeriodicalId":504870,"journal":{"name":"Energies","volume":"37 4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141650821","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Suitable Site Selection of Public Charging Stations: A Fuzzy TOPSIS MCDA Framework on Capacity Substation Assessment","authors":"W. E. Chumbi, Roger Martínez-Minga, S. Zambrano-Asanza, Jˆonatas B. Leite, J. F. Franco","doi":"10.3390/en17143452","DOIUrl":"https://doi.org/10.3390/en17143452","url":null,"abstract":"The number of electric vehicles (EVs) continues to increase in the automobile market, driven by public policies since they contribute to the global decarbonization of the transportation sector. Still, the main challenge to increasing EV adoption is charging infrastructure. Therefore, the site selection of public EV charging stations should be made very carefully to maximize EV usage and address the population’s range anxiety. Since electricity demand for charging EVs introduces new load shapes, the interrelationship between the location of charging stations and long-term electrical grid planning must be addressed. The selection of the most suitable site involves conflicting criteria, requiring the application of multi-criteria analysis. Thus, a geographic information system-based Multicriteria Decision Analysis (MCDA) approach is applied in this work to address the charging station site selection, where the demographic criteria and energy density are taken into account to formulate an EV increase model. Several methods, including Fuzzy TOPSIS, are applied to validate the selection of suitable sites. In this evaluation, the impact of the EV charging station on the substation capacity is assessed through a high EV penetration scenario. The proposed method is applied in Cuenca, Ecuador. Results show the effectiveness of MCDA in assessing the impact of charging stations on power distribution systems ensuring suitable system operation under substation capacity reserves.","PeriodicalId":504870,"journal":{"name":"Energies","volume":"40 12","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141652480","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Novel Fault Protection Method for Flexible DC Power Systems","authors":"Genqi Chen, Qing Duan, Caihong Zhao, Haoqing Wang, Guanglin Sha, Jian Gao, Yong Li, Shuiliang Zhou","doi":"10.3390/en17143446","DOIUrl":"https://doi.org/10.3390/en17143446","url":null,"abstract":"A fault protection method is proposed for flexible direct-current (DC) power systems based on the cosine similarity of currents in current-limiting reactors. The typical characteristics of external and internal faults in a flexible DC power system were analyzed. The principles of cosine similarity and the fault current characteristics of current-limiting reactors were used to distinguish between internal and external faults. The ratio of the average positive and negative voltages of the current-limiting reactor was then used to distinguish the fault types and fault line. Finally, a simulation model of a circular flexible DC power system was constructed using MATLAB/Simulink software (2018b). The simulation results show that the proposed protection scheme can quickly and accurately identify the location and type of faults, and has a strong ability to withstand fault resistance and is less affected by distributed capacitance, noise, and communication delay.","PeriodicalId":504870,"journal":{"name":"Energies","volume":"33 24","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141650965","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}