International Journal of Prosthodontics最新文献

{"title":"Effects of Different Bonding Agents on the Shear Bond Strength Between Monolithic Zirconia and Indirect Composite.","authors":"Elif Saracoglu Mergen,&nbsp;Zekeriya Yasar Comert,&nbsp;Dilara Seyma Alpkilic İşsever,&nbsp;Ergun Kelesoğlu,&nbsp;Sabire Isler Deger","doi":"10.11607/ijp.8340","DOIUrl":"https://doi.org/10.11607/ijp.8340","url":null,"abstract":"<p><strong>Purpose: </strong>To investigate the effects of different bonding agents and application of glaze on the shear bond strength (SBS) between monolithic zirconia (MZ) and indirect composite (IC).</p><p><strong>Materials and methods: </strong>Five different bonding agents (G-Premio Bond [GP]; Tokuyama Universal Bond [TU]; Signum Zirconia bond [SZ]; Clearfil Ceramic Primer Plus [CCP]; Z-Prime Plus [ZP]) were applied to a total of 200 MZ disk-shaped specimens (n = 100 glazed and 100 nonglazed). Half of the specimens then underwent thermocycling and the other half no thermocycling (n = 10 specimens each subgroup). The experimental setup was prepared as two pieces according to the ISO TR 11405 standards. Specimens embedded in acrylic resin were placed into the experimental setup and a universal testing machine at a crosshead speed of 0.5 mm/minute. Mann-Whitney U test and Kruskal-Wallis test were used for statistical analyses. Bonferroni correction was then performed, and test results with P < .05 were accepted as statistically significant.</p><p><strong>Results: </strong>The application of glaze significantly enhanced SBS when ZP or CCP was used; however, it did not have any significant effect when GP, TU, or SZ were used. Thermocycling significantly decreased the SBS in all bonding agent groups except GP specimens with glaze (P = .16). The highest SBS in all conditions was noted when GP and TU were used.</p><p><strong>Conclusions: </strong>These findings suggest that the bonding agents GP and TU may be recommended for better bonding between MZ and IC.</p>","PeriodicalId":50292,"journal":{"name":"International Journal of Prosthodontics","volume":"36 4","pages":"13-28"},"PeriodicalIF":2.3,"publicationDate":"2023-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"10588567","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"A Comparison of Denture Base Retention and Adaptation Between CAD/CAM and Conventional Fabrication Techniques.","authors":"Mahmoud Amin Faty,&nbsp;Marwa Ezzat Sabet,&nbsp;Yasmine Galaleldin Thabet","doi":"10.11607/ijp.7193","DOIUrl":"https://doi.org/10.11607/ijp.7193","url":null,"abstract":"<p><strong>Purpose: </strong>To assess the retention and adaptation of milled and printed denture bases in comparison to conventional ones.</p><p><strong>Materials and methods: </strong>A total of 24 completely edentulous patients were selected. For each patient, three maxillary denture bases were constructed according to different fabrication techniques, thus defining the three groups for comparison: group 1 consisted of denture bases constructed by a conventional technique, group 2 consisted of denture bases milled from prepolymerized blocks of PMMA, and group 3 consisted of denture bases fabricated by a 3D printing technique. A digital force gauge was used for measuring the retention of the denture bases intraorally, while Geomagic Control X 64 software was used to evaluate the adaptation of the denture bases with their corresponding master casts. Repeated-measures analysis of variance was used for comparison among the groups, followed by pairwise comparison with post hoc Bonferroni correction. The significance level was set at α = .05.</p><p><strong>Results: </strong>Statistical analysis showed significant differences among the three groups regarding retention and adaptation. The highest values of retention and adaptation of denture bases were found in group 2 (milling group).</p><p><strong>Conclusion: </strong>Within the limitations of this study, the following could be concuded: milled denture bases demonstrated better retention and adaptation than the conventional heat-polymerized and printed denture bases, and the printed denture bases showed better adaptation but similar retention to conventional heat-polymerized denture bases.</p>","PeriodicalId":50292,"journal":{"name":"International Journal of Prosthodontics","volume":"36 4","pages":"469-478"},"PeriodicalIF":2.3,"publicationDate":"2023-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"10588569","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Digital Impressions in Edentulous Patients: A Systematic Review for Clinical Evidence.","authors":"Alessio Casucci,&nbsp;Claudia Mazzitelli,&nbsp;Vasileios Tsiplakis,&nbsp;Luigi Federico D'Arienzo,&nbsp;Lorenzo Breschi,&nbsp;Marco Ferrari","doi":"10.11607/ijp.7483","DOIUrl":"https://doi.org/10.11607/ijp.7483","url":null,"abstract":"<p><strong>Purpose: </strong>To evaluate the accuracy, working time, and patient satisfaction of digital impressions (DI) vs conventional impressions (CI) taken for removable prostheses on edentulous arches.</p><p><strong>Materials and methods: </strong>A systematic search of the literature was conducted in electronic databases. The English language was filtered with no limitation on publication date. The search was performed up to June 2022. Only in vivo studies comparing DI and CI techniques for the fabrication of complete removable prostheses were included. The primary outcome was accuracy (in terms of trueness and precision), working time (scanning time), and patient satisfaction of DI procedures.</p><p><strong>Results: </strong>After title and abstract screening, six articles were considered eligible for inclusion. All articles investigated the trueness of DI, while no study evaluated the accuracy in terms of precision. The discrepancies between DI and CI were primarily in the peripheral areas. Only one article focused on the working time for scanning procedures. Patient satisfaction was surveyed in just one study. Lack of standardization of the CI procedures and sample size collection were observed in all studies.</p><p><strong>Conclusions: </strong>The scientific evidence so far collected on IOS for complete edentulous arches is not exhaustive, in particular when dealing with scanning time and patient satisfaction. Regarding accuracy, digital scanning in edentulous patients seems to be a predictable procedure within the limits of the attached mucosa.</p>","PeriodicalId":50292,"journal":{"name":"International Journal of Prosthodontics","volume":"36 4","pages":"486-497"},"PeriodicalIF":2.3,"publicationDate":"2023-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"10229864","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Winners of the 2023 IADR Awards.","authors":"Stephen F Rosenstiel","doi":"10.11607/ijp.2023.4.e","DOIUrl":"https://doi.org/10.11607/ijp.2023.4.e","url":null,"abstract":"","PeriodicalId":50292,"journal":{"name":"International Journal of Prosthodontics","volume":"36 4","pages":"393-394"},"PeriodicalIF":2.3,"publicationDate":"2023-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"10221047","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Finite Element Analysis of Occlusal Interferences in Dental Prosthetics Caused by Occlusal Adjustment.","authors":"Alois Schmid,&nbsp;Thomas Strasser,&nbsp;Martin Rosentritt","doi":"10.11607/ijp.7178","DOIUrl":"https://doi.org/10.11607/ijp.7178","url":null,"abstract":"<p><strong>Purpose: </strong>To investigate the influence of occlusal interference using finite element analysis (FEA).</p><p><strong>Materials and methods: </strong>The FEA model designed for this study centered on an all-ceramic, bilayered, fixed partial denture (FPD) retained on the maxillary first premolar and first molar, with the second premolar replaced by a pontic. The surrounding structures-such as the neighboring teeth, antagonists, and periodontium-were modeled. Four different loading cases were designed at occlusal interferences of 0, 8, 12, and 24 μm and were loaded by a simulated bite force of 300 N. Principal and von Mises stresses, as well as strain, were evaluated for all included structures.</p><p><strong>Results: </strong>For interferences of 12 and 24 μm, failure-relevant tensile stresses in the veneering layer were observed at the occlusal surfaces. Stress found in the zirconia FPD did not reach fatigue or flexural strength for any test load.</p><p><strong>Conclusion: </strong>Peak tensile stress was observed in close proximity to occlusal contact points, increasing with increasing occlusal interference. The FEA results suggest that the majority of occlusal stress is absorbed by the deformation of the periodontal ligament. Framework failure caused by the simulated interferences was not expected. Surface defects may ultimately lead to failure due to fracture or chipping, especially in cases of weaker ceramics or veneering.</p>","PeriodicalId":50292,"journal":{"name":"International Journal of Prosthodontics","volume":"36 4","pages":"436-442"},"PeriodicalIF":2.3,"publicationDate":"2023-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"10241879","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Effect of Tooth Brushing Cycles and Dentifrice Fluoride Concentration on a Glazed CAD/CAM Ceramic.","authors":"Fernanda Bidoli,&nbsp;Eduardo F de Castro,&nbsp;Veber L B Azevedo,&nbsp;Richard B Price,&nbsp;Gabriel Nima,&nbsp;Oswaldo S de Andrade,&nbsp;Marcelo Giannini","doi":"10.11607/ijp.7187","DOIUrl":"https://doi.org/10.11607/ijp.7187","url":null,"abstract":"<p><strong>Purpose: </strong>To evaluate the effect of tooth brushing and dentifrice fluoride (F-) concentration on changes in color and translucency (ΔE00 and ΔT00, respectively), surface gloss (GS), surface roughness (Sa), and microstructure of a glazed CAD/CAM ceramic.</p><p><strong>Materials and methods: </strong>Ceramic blocks (e.max/CAD) were sectioned into rectangular plates (14 x 12 x 1 mm), and one surface of each sample was glazed. Samples were divided into three groups according to the F- concentration in the dentifrice (0, 1,100, and 5,000 μg/g) and were then subjected to 60,000 tooth brushing cycles. Luminosity and color were measured using a spectrophotometer at baseline and after every 20,000 cycles to obtain their ΔE00 and ΔT00 values. Another set of samples was prepared to measure the GS with a gloss meter and the Sa with a confocal laser microscope. The GS and Sa results were subjected to analysis of variance, Tukey test, and Dunnett test (α = .05).</p><p><strong>Results: </strong>After 60,000 tooth brushing cycles, all of the variables were clinically acceptable, and there were no significant differences in the ΔE00, ΔT00, GS, or Sa among the fluoridated dentifrices. The GS values decreased significantly as the number of tooth brushing cycles increased.</p><p><strong>Conclusion: </strong>The ΔE00, ΔT00, GS, and Sa values were all clinically acceptable after the glazed e.max/CAD ceramic had been subjected to 60,000 tooth brushing cycles with dentifrices containing up to 5,000 μg/g of F-.</p>","PeriodicalId":50292,"journal":{"name":"International Journal of Prosthodontics","volume":"36 4","pages":"451-459"},"PeriodicalIF":2.3,"publicationDate":"2023-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"10588570","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"3D Facial Changes Between Maximal Intercuspal Position and Physiologic Rest Position.","authors":"Ingo Oblak,&nbsp;Nataša Ihan Hren,&nbsp;Miha Verdenik","doi":"10.11607/ijp.7533","DOIUrl":"https://doi.org/10.11607/ijp.7533","url":null,"abstract":"<p><strong>Purpose: </strong>To evaluate the soft tissue changes of the face between two positions of occlusion: maximal intercuspal position (MIP) and physiologic rest position (RP).</p><p><strong>Materials and methods: </strong>In this study, facial surface scans of 83 volunteers in two mandibular positions (MIP and RP) were obtained using a 3D optical scanner. On each 3D image, 21 cephalometric soft tissue landmarks were identified and then compared using t test for various facial parameters (widths, heights, depths, angles, and ratio). Additionally, a regional analysis of the facial surface differences in each patient between the two mandibular positions was performed using a whole scan shell best-fit method and the regional forehead best-fit method.</p><p><strong>Results: </strong>In MIP, facial heights with the nasion-gnathion distance shortened by approximately 1.2 mm (due to the vertical shrinkage of both lips together by 0.8 mm), and the mouth width was significantly widened, while other facial widths displayed no change. The labiomental angle and the upper vermilion arch were altered correspondingly, and regional analysis confirmed the findings with evident changes in the mandibular and subnasal areas with deviations amplified toward the facial midline.</p><p><strong>Conclusions: </strong>By applying 3D facial-scanning technology, this study displayed changes of facial appearance in different mandibular positions (MIP and RP), highlighting the need to instruct and monitor the patient's mandibular position more consistently to achieve accurate and repeatable data in a 3D facial analysis.</p>","PeriodicalId":50292,"journal":{"name":"International Journal of Prosthodontics","volume":"36 4","pages":"395-401"},"PeriodicalIF":2.3,"publicationDate":"2023-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"10221045","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Influence of Polymerization Postprocessing Procedures on the Accuracy of Additively Manufactured Dental Model Material.","authors":"Delaram Mostafavi,&nbsp;Mohammed M Methani,&nbsp;Wenceslao Piedra-Cascón,&nbsp;Amirali Zandinejad,&nbsp;Wael Att,&nbsp;Marta Revilla-León","doi":"10.11607/ijp.7349","DOIUrl":"https://doi.org/10.11607/ijp.7349","url":null,"abstract":"<p><strong>Purpose: </strong>To measure the influence of postpolymerization condition (dry and water-submerged) and time (2, 10, 20, and 40 minutes) on the accuracy of additively manufactured model material.</p><p><strong>Materials and methods: </strong>A bar standard tessellation language (STL) file was used to manufacture all the resin specimens using a 3D printer. Two groups (n = 80 each) were created based on postpolymerization condition: dry (D group) and water-submerged (W group). Each group was then divided into four subgroups (D1 to D4 and W1 to W4; n = 20 each), which were each assigned a postpolymerizing time (2, 10, 20, and 40 minutes). The specimens' dimensions were measured using a low-force digital caliper. The volume was calculated as follows: V = l × w × h. Shapiro-Wilk test revealed that the data were not normally distributed. Data were analyzed using Kruskal-Wallis and pairwise Mann-Whitney U tests (α = .05).</p><p><strong>Results: </strong>Significant differences in length, width, height, and volume were found among the subgroups (P < .0018). In all groups, the width dimension (x-axis) presented less accuracy compared to height (z-axis) and length (y-axis) (P < .0018). The D2 and D4 subgroups obtained the closest dimensions to the virtual design, and there were no significant differences between these subgroups (P < .0018). The dry condition showed higher manufacturing accuracy than the water-submerged condition. In the water-submerged subgroups, the highest accuracy was obtained in the W2 and W4 subgroups (P < .0018).</p><p><strong>Conclusions: </strong>Postpolymerization condition and time influenced the accuracy of the material tested. The dry postpolymerization condition with times of 10 and 40 minutes obtained the highest accuracy.</p>","PeriodicalId":50292,"journal":{"name":"International Journal of Prosthodontics","volume":"36 4","pages":"479-485"},"PeriodicalIF":2.3,"publicationDate":"2023-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"10241878","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Preplanned Computer-Assisted Advanced Implant Placement for Orthodontic Patients: Presentation of a Novel Multidisciplinary Treatment Approach and a Case Report.","authors":"Karim El Kholy,&nbsp;Simon Doliveux,&nbsp;Nikos Mattheos,&nbsp;Daniel Buser","doi":"10.11607/ijp.7684","DOIUrl":"https://doi.org/10.11607/ijp.7684","url":null,"abstract":"<p><p>This case report describes a novel approach combining orthodontic and implant digital treatment planning workflows to enable prosthetically driven implant placement before orthodontic treatment is performed or completed. The computer-assisted implant placement is performed using a static surgical guide based on the future positions of the teeth after completion of orthodontic treatment. This innovative approach allows for select partially edentulous patients to undergo fixed prosthetic rehabilitation before orthodontic treatment is completed.</p>","PeriodicalId":50292,"journal":{"name":"International Journal of Prosthodontics","volume":"36 4","pages":"508-515"},"PeriodicalIF":2.3,"publicationDate":"2023-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"10241882","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Influence of Surface Treatment on the Physical Properties and Biofilm Formation of Zirconia- Reinforced Lithium Silicate Ceramics: In Vitro Trial.","authors":"Patricia Akemi Nishitani Shibasaki,&nbsp;Vanessa Cavalli,&nbsp;Mateus Cardoso Oliveira,&nbsp;Janaina Priscila Barbosa,&nbsp;Marcelo Fabiano Gomes Boriollo,&nbsp;Luis Roberto Marcondes Martins","doi":"10.11607/ijp.7192","DOIUrl":"10.11607/ijp.7192","url":null,"abstract":"<p><strong>Purpose: </strong>To evaluate the performance of fully crystallized zirconia-reinforced lithium silicate (Celtra Duo, ZLS-CD), partially crystallized zirconia-reinforced lithium silicate (Vita Suprinity, ZLS-VS), and partially sintered lithium disilicate-based (IPS e.max CAD, LD) glass-ceramics submitted to polishing, glazing, or no surface treatment after aging.</p><p><strong>Material and methods: </strong>Samples of each glass-ceramic material were subjected to polishing with rubber cups (POL), glazing (GL), or no treatment (control: unpolished) and afterward aged with 18,000 thermal cycles (5.C to 55.C). The average roughness, 2D and 3D morphology, contact angle, multispecies biofilm formation (Streptococcus mutans and Candida albicans), and mechanical strength were evaluated with atomic force microscopy (AFM, n = 5), sessile-drop goniometry (n = 5), spectrophotometry (n = 5), and the flexural strength test (n = 10), respectively. Data were analyzed using two-way ANOVA and Tukey test (α = 5%).</p><p><strong>Results: </strong>POL produced lower surface roughness than GL, and ZLS-CD presented higher roughness than LD (P < .05). Surfaces without polishing displayed higher roughness than the POL group (P < .001), greater contact angle (P < .001), and significant morphologic changes, regardless of the glass-ceramic material. Irrespective of the treatment, the contact angle was higher in the ZLS-CD group, and regardless of the material, there was higher biofilm formation and lower flexural strength of the unpolished compared to the POL or GL ceramics.</p><p><strong>Conclusions: </strong>POL promoted lower roughness and minor morphologic surface alterations, but biofilm formation and flexural strength were similar to the GL group. In general, ZLS-CD and ZLS-VS showed more similar behavior than LD, which makes ZLS glass-ceramic a good option for indirect restorations.</p>","PeriodicalId":50292,"journal":{"name":"International Journal of Prosthodontics","volume":"36 4","pages":"460-468"},"PeriodicalIF":2.3,"publicationDate":"2023-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"10596353","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}