Industrial Robot最新文献

{"title":"Topology-preserved distorted space path planning","authors":"Yangmin Xie, Qiaoni Yang, Rui Zhou, Zhiyan Cao, Hang Shi","doi":"10.1108/ir-02-2024-0049","DOIUrl":"https://doi.org/10.1108/ir-02-2024-0049","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>Fast obstacle avoidance path planning is a challenging task for multijoint robots navigating through cluttered workspaces. This paper aims to address this issue by proposing an improved path-planning method based on the distorted space (DS) method, specifically designed for high-dimensional complex environments.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>The proposed method, termed topology-preserved distorted space (TP-DS) method, mitigates the limitations of the original DS method by preserving space topology through elastic deformation. By applying distinct spring constants, the TP-DS autonomously shrinks obstacles to microscopic areas within the configuration space, maintaining consistent topology. This enhancement extends the application scope of the DS method to handle complex environments effectively.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>Comparative analysis demonstrates that the proposed TP-DS method outperforms traditional methods regarding planning efficiency. Successful obstacle avoidance tasks in the cluttered workspace validate its applicability on a physical 6-DOF manipulator, highlighting its potential for industrial implementations.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>The novel TP-DS method generates a topology-preserved collision-free space by leveraging elastic deformation and shows significant capability and efficiency in planning obstacle-avoidance paths in complex application scenarios.</p><!--/ Abstract__block -->","PeriodicalId":501389,"journal":{"name":"Industrial Robot","volume":"31 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141744102","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"An automatic robot for ultrasonic partial discharge detection of gas-insulated switchgear","authors":"Run Yang, Jingru Li, Taiyun Zhu, Di Hu, Erbao Dong","doi":"10.1108/ir-01-2024-0005","DOIUrl":"https://doi.org/10.1108/ir-01-2024-0005","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>Gas-insulated switchgear (GIS) stands as a pivotal component in power systems, susceptible to partial discharge occurrences. Nevertheless, manual inspection proves labor-intensive, exhibits a low defect detection rate. Conventional inspection robots face limitations, unable to perform live line measurements or adapt effectively to diverse environmental conditions. This paper aims to introduce a novel solution: the GIS ultrasonic partial discharge detection robot (GBOT), designed to assume the role of substation personnel in inspection tasks.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>GBOT is a mobile manipulator system divided into three subsystems: autonomous location and navigation, vision-guided and force-controlled manipulator and data detection and analysis. These subsystems collaborate, incorporating simultaneous localization and mapping, path planning, target recognition and signal processing, admittance control. This paper also introduces a path planning method designed to adapt to the substation environment. In addition, a flexible end effector is designed for full contact between the probe and the device.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>The robot fulfills the requirements for substation GIS inspections. It can conduct efficient and low-cost path planning with narrow passages in the constructed substation map, realizes a sufficiently stable detection contact and perform high defect detection rate.</p><!--/ Abstract__block -->\u0000<h3>Practical implications</h3>\u0000<p>The robot mitigates the labor intensity of grid maintenance personnel, enhances inspection efficiency and safety and advances the intelligence and digitization of power equipment maintenance and monitoring. This research also provides valuable insights for the broader application of mobile manipulators in diverse fields.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>The robot is a mobile manipulator system used in GIS detection, offering a viable alternative to grid personnel for equipment inspections. Comparing with the previous robotic systems, this system can work in live electrical detection, demonstrating robust environmental adaptability and superior efficiency.</p><!--/ Abstract__block -->","PeriodicalId":501389,"journal":{"name":"Industrial Robot","volume":"74 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141719817","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Adaptive variable impedance force/position hybrid control for large surface polishing","authors":"Zhixu Zhu, Hualiang Zhang, Guanghui Liu, Dongyang Zhang","doi":"10.1108/ir-10-2023-0237","DOIUrl":"https://doi.org/10.1108/ir-10-2023-0237","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>This paper aims to propose a hybrid force/position controller based on the adaptive variable impedance.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>First, the working space is divided into a force control subspace and a position subspace, the force control subspace adopts the position impedance control strategy. At the same time, the contact force model between the robot and the surface is analyzed in this space. Second, based on the traditional position impedance, the model reference adaptive control is introduced to provide an accurate reference position for the impedance controller. Then, the BP neural network is used to adjust the impedance parameters online.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>The experimental results show that compared with the traditional PI control method, the proposed method has a higher flexibility, the dynamic response accommodation time is reduced by 7.688 s and the steady-state error is reduced by 30.531%. The overshoot of the contact force between the end of robot and the workpiece is reduced by 34.325% comparing with the fixed impedance control method.</p><!--/ Abstract__block -->\u0000<h3>Practical implications</h3>\u0000<p>The proposed control method compares with a hybrid force/position based on PI control method and a position fixed impedance control method by simulation and experiment.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>The adaptive variable impedance control method improves accuracy of force tracking and solves the problem of the large surfaces with robot grinding often over-polished at the protrusion and under-polished at the concave.</p><!--/ Abstract__block -->","PeriodicalId":501389,"journal":{"name":"Industrial Robot","volume":"32 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141719818","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Research on robot tracking force control algorithm based on neural networks","authors":"Liang Du, Meng Xiao","doi":"10.1108/ir-04-2024-0176","DOIUrl":"https://doi.org/10.1108/ir-04-2024-0176","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>This study aims to propose a force control algorithm based on neural networks, which enables a robot to follow a changing reference force trajectory when in contact with human skin while maintaining a stable tracking force.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>Aiming at the challenge of robots having difficulty tracking changing force trajectories in skin contact scenarios, a single neuron algorithm adaptive proportional – integral – derivative online compensation is used based on traditional impedance control. At the same time, to better adapt to changes in the skin contact environment, a gated recurrent unit (GRU) network is used to model and predict skin elasticity coefficients, thus adjusting to the uncertainty of skin environments.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>In two robot–skin interaction experiments, compared with the traditional impedance control and robot force control algorithm based on the radial basis function model and iterative algorithm, the maximum absolute force error, the average absolute force error and the standard deviation of the force error are all decreased.</p><!--/ Abstract__block -->\u0000<h3>Research limitations/implications</h3>\u0000<p>As the training process of the GRU network is currently conducted offline, the focus in the subsequent phase is to refine the network to facilitate real-time computation of the algorithm.</p><!--/ Abstract__block -->\u0000<h3>Practical implications</h3>\u0000<p>This algorithm can be applied to robot massage, robot B-ultrasound and other robot-assisted treatment scenarios.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>As the proposed approach obtains effective force tracking during robot–skin contact and is verified by the experiment, this approach can be used in robot–skin contact scenarios to enhance the accuracy of force application by a robot.</p><!--/ Abstract__block -->","PeriodicalId":501389,"journal":{"name":"Industrial Robot","volume":"6 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141719884","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"An obstacle avoidance method for robotic arm based on reinforcement learning","authors":"Peng Wu, Heng Su, Hao Dong, Tengfei Liu, Min Li, Zhihao Chen","doi":"10.1108/ir-05-2024-0206","DOIUrl":"https://doi.org/10.1108/ir-05-2024-0206","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>Robotic arms play a crucial role in various industrial operations, such as sorting, assembly, handling and spraying. However, traditional robotic arm control algorithms often struggle to adapt when faced with the challenge of dynamic obstacles. This paper aims to propose a dynamic obstacle avoidance method based on reinforcement learning to address real-time processing of dynamic obstacles.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>This paper introduces an innovative method that introduces a feature extraction network that integrates gating mechanisms on the basis of traditional reinforcement learning algorithms. Additionally, an adaptive dynamic reward mechanism is designed to optimize the obstacle avoidance strategy.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>Validation through the CoppeliaSim simulation environment and on-site testing has demonstrated the method's capability to effectively evade randomly moving obstacles, with a significant improvement in the convergence speed compared to traditional algorithms.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>The proposed dynamic obstacle avoidance method based on Reinforcement Learning not only accomplishes the task of dynamic obstacle avoidance efficiently but also offers a distinct advantage in terms of convergence speed. This approach provides a novel solution to the obstacle avoidance methods for robotic arms.</p><!--/ Abstract__block -->","PeriodicalId":501389,"journal":{"name":"Industrial Robot","volume":"24 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141722314","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Visual servoing method of high voltage capacitor tower maintenance robot in bolt tightening","authors":"Yuze Wu, Jianbin Liao, Liangyu Liu, Yu Yan, Yunfei Ai, Yunxiang Li, Wang Wei","doi":"10.1108/ir-03-2024-0083","DOIUrl":"https://doi.org/10.1108/ir-03-2024-0083","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>This paper aims to address the challenges of the capacitor tower maintenance robot during bolt tightening in high-voltage substations, including difficulties in bolt positioning due to tilted angles and anti-bird cover occlusion and issues with fast and accurate docking of bolts while the base is moving.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>This paper proposes a visual servoing method for the capacitor tower maintenance robot, including bolt pose estimation and visual servoing control. Bolt pose estimation includes four components: constructing a keypoint detection network to identify the approximate position, precise positioning, rapid prediction and calculation of bolt pose. In visual servoing, an improved position-based visual servoing (PBVS) is proposed, which eliminate steady-state error and enhance response speed during dynamic tracking by incorporating integral and differential components.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>The bolt detection method exhibits high robustness against varying lighting conditions, partial occlusions, shooting distances and angles. The maximum positioning error at a distance of 250 mm is 2.8 mm. The convergence speed of the improved PBVS is 10% higher than that of the traditional PBVS when the base and target remain relatively stationary. When the base moves at a constant speed, the improved method eliminates steady-state error in dynamic tracking. When the base moves rapidly and intermittently, the maximum error of the improved method in the tracking process is 30% smaller than that of traditional PBVS.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>This method enables real-time detection and positioning of bolts in an unstructured environment with tilt angles, variable lighting conditions and occlusion by anti-bird covers. An improved PBVS is proposed to enhance its capability in tracking dynamic targets.</p><!--/ Abstract__block -->","PeriodicalId":501389,"journal":{"name":"Industrial Robot","volume":"78 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141587345","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Mechanoreception of pneumatic soft robotic finger without tactile sensor based on dual-position feature","authors":"Kai Shi, Jun Li, Gang Bao","doi":"10.1108/ir-03-2024-0096","DOIUrl":"https://doi.org/10.1108/ir-03-2024-0096","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>Mechanoreception is crucial for robotic planning and control applications, and for robotic fingers, mechanoreception is generally obtained through tactile sensors. As a new type of robotic finger, the soft finger also requires mechanoreception, like contact force and object stiffness. Unlike rigid fingers, soft fingers have elastic structures, meaning there is a connection between force and deformation of the soft fingers. It allows soft fingers to achieve mechanoreception without using tactile sensors. This study aims to provide a mechanoreception sensing scheme of the soft finger without any tactile sensors.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>This research uses bending sensors to measure the actual bending state under force and calculates the virtual bending state under assumed no-load conditions using pressure sensors and statics model. The difference between the virtual and actual finger states is the finger deformation under load, and its product with the finger stiffness can be used to calculate the contact force. There are distinctions between the virtual and actual finger state change rates in the pressing process. The difference caused by the stiffness of different objects is different, which can be used to identify the object stiffness.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>Contact force perception can achieve a detection accuracy of 0.117 N root mean square error within the range of 0–6 N contact force. The contact object stiffness perception has a detection average deviation of about 15%, and the detection standard deviation is 10% for low-stiffness objects and 20% for high-stiffness objects. It performs better at detecting the stiffness of low-stiffness objects, which is consistent with the sensory ability of human fingers.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>This paper proposes a universal mechanoreception method for soft fingers that only uses indispensable bending and pressure sensors without tactile sensors. It helps to reduce the hardware complexity of soft robots. Meanwhile, the soft finger no longer needs to deploy the tactile sensor at the fingertip, which can benefit the optimization design of the fingertip structure without considering the complex sensor installation. On the other hand, this approach is no longer confined to adding components needed. It can fully use the soft robot body’s physical elasticity to convert sensor signals. Essentially, It treats the soft actuators as soft sensors.</p><!--/ Abstract__block -->","PeriodicalId":501389,"journal":{"name":"Industrial Robot","volume":"22 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141569028","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Path optimization of underwater vehicles in multi-obstacle environment based on energy constraint strategy","authors":"Chang Yuan, Xinyu Wu, Donghai Zeng, Baoren Li","doi":"10.1108/ir-03-2024-0119","DOIUrl":"https://doi.org/10.1108/ir-03-2024-0119","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>To solve the problem that the underwater vehicles is difficult to turn and exit in a small range in the face of complex marine environment such as concave and ring under the limitation of its limitation of its shape and maximum steering angle, this paper aims to propose an improved ant colony algorithm based on trap filling strategy and energy consumption constraint strategy.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>Firstly, on the basis of searching the global path, the disturbed terrain was pre-filled in the complex marine environments. Based on the energy constraint strategy, the ant colony algorithm was improved to make the search path of the underwater vehicle meet the requirements of the lowest energy consumption and the shortest path in the complex obstacle environment.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>The simulation results showed that the modified grid environment diagram effectively reduced the redundancy search and improved the optimization efficiency. Aiming at the problem of “the shortest distance is not the lowest energy consumption” in the traditional path optimization algorithm, the energy consumption level was reduced by 26.41% after increasing the energy consumption constraint, although the path length and the number of inflection points were slightly higher than the shortest path constraint, which was more conducive to the navigation of underwater vehicles.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>The method proposed in this paper is not only suitable for trajectory planning of underwater robots but also suitable for trajectory planning of land robots.</p><!--/ Abstract__block -->","PeriodicalId":501389,"journal":{"name":"Industrial Robot","volume":"9 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141568925","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Design and application of bidirectional soft actuator with multiangle chambers","authors":"Yehao Wen, Chang Chen, Zhengnan Lyu, Yuandong Liang, Zhongyu Zhang","doi":"10.1108/ir-04-2024-0136","DOIUrl":"https://doi.org/10.1108/ir-04-2024-0136","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>This study aims to introduce a novel bidirectional soft actuator as an enhancement to conventional pneumatic network actuators. This improvement involves integrating air chambers positioned at specific angles to improve stability, adaptability and grasping efficiency in various environments.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>The design approach incorporates air chambers positioned at a 45° angle relative to the horizontal direction at the actuator's terminus, along with additional chambers at a 90° angle. Mathematical models are developed for longitudinal and transverse bending, as well as for obliquely connected cavities, based on the assumption of piecewise constant curvature. Analyses are conducted on output forces, bending characteristics and end contact areas for both transverse and longitudinal ends.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>The proposed soft actuator surpasses traditional pneumatic network actuators in gripping area due to the inclusion of a diagonal air cavity and a transverse pneumatic network structure at the terminus. As a result, it provides torsion and gripping force in both directions. Testing on a dedicated platform with two variants of grippers demonstrates superior gripping force capability and performance in complex environments.</p><!--/ Abstract__block -->\u0000<h3>Practical implications</h3>\u0000<p>Through the design of multiangle chambers, the soft actuator exhibits diverse driving angles and morphological variations, offering innovative design perspectives for industrial grasping.</p><!--/ Abstract__block -->\u0000<h3>Social implications</h3>\u0000<p>The design of multiangle chambers facilitates personalized configurations of soft actuators by researchers, enabling tailored angles for specific interaction environments to achieve desired functionalities. This approach offers novel insights into soft actuator design, addressing more prevalent industrial grasping challenges.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>This study introduces a novel soft actuator design that significantly enhances gripping capabilities in comparison to conventional pneumatic network actuators. The incorporation of specific air chamber configurations and mathematical modeling provides valuable insights for the development of adaptable and efficient robotic grippers for industrial and household applications.</p><!--/ Abstract__block -->","PeriodicalId":501389,"journal":{"name":"Industrial Robot","volume":"225 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141515723","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Human-following task without a prior map","authors":"Zhiqiang Zhou, Yong Fu, Wei Wu","doi":"10.1108/ir-12-2023-0319","DOIUrl":"https://doi.org/10.1108/ir-12-2023-0319","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>The human-following task is a fundamental function in human–robot collaboration. It requires a robot to recognize and locate a target person, plan a path and avoid obstacles. To enhance the applicability of the human-following task in various scenarios, it should not rely on a prior map. This paper aims to introduce a human-following method that meets these requirements.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>For the identification and localization of the target person (ILTP), this paper proposes an approach that integrates data from a camera, a light detection and ranging (LiDAR) and a ultra-wideband (UWB) anchor. For path planning and obstacle avoidance, a modified timed-elastic-bands (TEB) algorithm is introduced.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>Compared to the UWB-only method, where only UWB is used to locate the target person, the proposed ILTP method in this paper reduces the localization error by 41.82%. Experimental results demonstrate the effectiveness of the ILTP and the modified TEB method under various challenging conditions. Such as crowded environments, multiple obstacles, the target person being occluded and the target person moving out of the robot’s field of view. The complete experimental videos are available for viewing on https://youtu.be/ZKbrNE1sePM.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>This paper offers a novel solution for human-following tasks. The proposed ILTP method can recognize the target person among multiple individuals, determine whether the target person is lost and publish the target person’s position at a frequency of 20 Hz. The modified TEB algorithm does not rely on a prior map. It can plan paths and avoid obstacles effectively.</p><!--/ Abstract__block -->","PeriodicalId":501389,"journal":{"name":"Industrial Robot","volume":"12 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141515721","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}