{"title":"A review on process of 3D Model Reconstruction","authors":"A. Intwala, Atul Magikar","doi":"10.1109/ICEEOT.2016.7755218","DOIUrl":"https://doi.org/10.1109/ICEEOT.2016.7755218","url":null,"abstract":"3D Model Reconstruction is of the most important part in the field of Reverse Engineering. It has now become feasible to use this method to create a 3D model of existing product, component for CAD/CAM applications. Various phases of reverse engineering and 3D reconstruction are reviewed in details along the methodology involved within these stages. Data acquisition is the most crucial stage of 3d model reconstruction. Non touch and touch techniques of data acquisition are studied giving comparative advantages and disadvantages over each other. Face based and Edge based techniques are reviewed for segmentation of acquired data. The collected point data is obtained in Stereo Lithography (STL) format which is most popular in field of modern computer science. This collected data can be used to construct surfaces using modern CAD systems like CATIA, Pro/E etc. This paper also reviews some of the researches in the field of Reverse Engineering, The methods they implemented and their outcome and various technologies used with their limitations. It reviews latest advancement in the field of 3d Model Reconstruction.","PeriodicalId":383674,"journal":{"name":"2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT)","volume":"47 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-03-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116180508","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Analysis of layer insulation of cast resin transformer using FEM technique","authors":"R. Patil, B. E. Kushare","doi":"10.1109/ICEEOT.2016.7754816","DOIUrl":"https://doi.org/10.1109/ICEEOT.2016.7754816","url":null,"abstract":"In this paper, a 400kVA, 11/0.433kV cast resin transformer (CRT) insulation system is considered for optimization. Due to its numerous advantages, the design and manufacturing technology for CRT is demanding, which can only be fulfilled if the design and manufacturing is free from any defects. The reliability and life of the CRT is defined by the life of its insulation system which is again a function of thermal and electrical stresses. To meet the allowable criteria for temperature rise is relatively an easy task for design engineers. Thus, within a window of 30 years, the reliability and life of CRT remains the function of electrical stresses only. Any activity of partial discharge (PD) in solid insulation leads to degradation of the solid insulation. In the event of PD, time to failure depends on PD energy, PD resistivity of the materials and dielectric gap. Optimization of electric field and ensuring a void-free insulation system is must to avoid the premature failure of CRT. The electric field in CRT; more specifically, in HV winding depends on the electrical stresses in inter-layer insulation. At microscopic level, turns per layer (differential turns), insulation thickness between layers, and conductor radius decides the electrical stresses. This paper addresses the optimization of inter-layer insulation design with finite element method (FEM) using 2D-ElecNet software by Infolytica Corporation. This software can be used for all types of electrostatic and electromagnetic analysis. It's a powerful tool that uses finite element analysis (FEA) to solve AC electromagnetic, electrostatic problems which provides powerful electric field simulations for both static and current flow related problems.","PeriodicalId":383674,"journal":{"name":"2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT)","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-03-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133583674","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Combined classification of Power Quality Disturbances and Power System Faults","authors":"Aslam Shaik, A. Reddy","doi":"10.1109/ICEEOT.2016.7755423","DOIUrl":"https://doi.org/10.1109/ICEEOT.2016.7755423","url":null,"abstract":"Power Quality has become an important issue for electric utilities and the customers with uninterrupted and reliable supply. Power Quality disturbances such as interruption in line, noise, distortion of waves like voltage sag, voltage swell, harmonics results in malfunction of equipment and causes failure of device. And at times it may cause unnecessary interruption of supply. Thus an intelligent classifier is needed to protect the device and to maintain the uninterrupted supply. This paper deals with the proposal for the development of an intelligent classifier by comparing the wave patterns of various Power Quality Disturbances and Power System Faults. Here ANN is used as classifier and wavelet is used as mechanism. This is modelled and simulated using MATLAB.","PeriodicalId":383674,"journal":{"name":"2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT)","volume":"50 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-03-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132838245","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Design of a broadband planar antenna for RF energy harvesting","authors":"Rewaa Maher, Emad Tammam, A. Galal, H. Hamed","doi":"10.1109/ICEEOT.2016.7754999","DOIUrl":"https://doi.org/10.1109/ICEEOT.2016.7754999","url":null,"abstract":"In this paper, a broadband planar antenna for radio frequency (RF) energy harvesting is proposed. Because of the weak levels of the ambient RF energy, it will be beneficial to harvest the energy from a wide frequency band. The proposed antenna is impedance matched to a 50-ohm line over the frequency band from 2.1 GHz to 7 GHz which has many of the operating wireless applications. Three deep resonances have been introduced at the frequencies 2.4 GHz, 4 GHz, and 5.8 GHz to increase the utility of the power resulted from the operating applications at theses frequencies. The proposed antenna has been simulated, fabricated, and experimentally measured. Satisfactory performance of the antenna has been obtained while a good agreement has been achieved between the simulation and measurement results.","PeriodicalId":383674,"journal":{"name":"2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT)","volume":"90 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-03-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130576510","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Big data analytics using agile model","authors":"Surend Raj Dharmapal, K. Sikamani","doi":"10.1109/ICEEOT.2016.7754854","DOIUrl":"https://doi.org/10.1109/ICEEOT.2016.7754854","url":null,"abstract":"This journal introduces the reader the background of Big Data Analytics and how efficiently Agile methodology can be applied to achieve the business goal. The journal focus on giving background of Big Data and how using Agile practices such as iterative, incremental, and evolutionary style of development can be applied for Big Data Analytics. This methodology brings in the advantage of involving business community during development and continuous delivery of working user features.","PeriodicalId":383674,"journal":{"name":"2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT)","volume":"18 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-03-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127811577","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Paparao Nalajala, Bhavana Godavarth, M. Raviteja, Deepthi Simhadri
{"title":"Morse code generator using Microcontroller with alphanumeric keypad","authors":"Paparao Nalajala, Bhavana Godavarth, M. Raviteja, Deepthi Simhadri","doi":"10.1109/ICEEOT.2016.7754788","DOIUrl":"https://doi.org/10.1109/ICEEOT.2016.7754788","url":null,"abstract":"This research paper proposes the Morse code which is the earliest method used in Radio Telegraphy. Because of advanced telecommunication systems it is considered to be an outdated technique. Travelers, Sailors, Villagers from remote areas where cellular networks are almost inaccessible would need a most reliable mode of communication. But, then there are chances that they might not able to handle Morse code, because of its complex encoding pattern and ON-OFF J38 Keying technique. So, in order to facilitate communication they can use this device where only the knowledge of alphabets and numbers is sufficient. With this design they will able to telegraph important messages with alphanumeric keypad and also read the messages from LCD screen. Using Microcontroller this device can encode and decode messages of International Morse Code.","PeriodicalId":383674,"journal":{"name":"2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT)","volume":"108 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-03-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129563751","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Design of HERIC configuration based grid connected single phase transformer less photovoltaic inverter","authors":"Payal Somani, Divyesh J. Vaghela","doi":"10.1109/ICEEOT.2016.7754815","DOIUrl":"https://doi.org/10.1109/ICEEOT.2016.7754815","url":null,"abstract":"In a grid connected photovoltaic system, the main aim is to design an efficient solar inverter with higher efficiency and which also controls the power that the inverter injects into the grid. The effectiveness of the general PV system anticipate on the productivity by which the direct current of the solar module is changed over into alternating current. The fundamental requirement to interface the solar module to the grid with increased productivity includes: Low THD of current injected to the grid, maximum power point, and high power factor. In this paper, a two stage topology without galvanic isolation is been carried out for a single phase grid connected photovoltaic inverter. The output from the PV panel is given to the DC/DC boost converter, maximum power point tracking (MPPT) control technique is being used to control the gate pulse of the IGBT of boost converter. The boosted output is fed to the highly efficient and reliable inverter concept (HERIC) inverter in order to convert DC into AC with higher efficiency.","PeriodicalId":383674,"journal":{"name":"2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT)","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-03-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126227055","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Design of high gain low power operational amplifier","authors":"Tripti Kackar, Shruti Suman, P. Ghosh","doi":"10.1109/ICEEOT.2016.7755310","DOIUrl":"https://doi.org/10.1109/ICEEOT.2016.7755310","url":null,"abstract":"The operational amplifiers are the versatile and significant modules in the field of electronic circuits. Two-stage Op-Amp is a multistage amplifier which is widely useful for on-chip applications. The proposed circuit is a two stage operational amplifier designed using differential architecture, implemented in CMOS technology. The circuit gives best results such as high gain of 1,960 dB and low power consumption of 1.320 mW at 180 nm technology.","PeriodicalId":383674,"journal":{"name":"2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT)","volume":"204 ","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-03-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120981682","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Multiport isolated bidirectional DC-DC converter interfacing battery and supercapacitor for hybrid energy storage application","authors":"K. Shreelekha, S. Arulmozhi","doi":"10.1109/ICEEOT.2016.7755198","DOIUrl":"https://doi.org/10.1109/ICEEOT.2016.7755198","url":null,"abstract":"This paper focuses on the hybrid energy storage system (HESS) utilizing and interfacing multiple energy storage system. The topology of the proposed multiport isolated bidirectional dc-dc converter (BDC) is the triple active full bridge (TAB) topology that interfaces battery as primary energy storage and supercapacitor as auxillary energy storage. Battery is the most matured technology in energy storage system (ESS) which has high energy density. On the other hand its dynamic response is slow which makes it unsuitable to satisfy the requirements of sudden changes on load or power. Meanwhile supercapacitor has short charging and discharging time and high power density. Interfacing of battery and supercapacitor mainly leads to stress reduction of battery that acts as main source. The proposed topology has the advantage of inherent bidirectional power flow, minimal number of conversion steps, high efficiency and centralized control can be implemented. Control strategy proposed for this converter is based on phase shift control (PS). In addition a control scheme employing a PI regulator is employed. The simulation results for different operating modes are carried out using MATLAB / Simulink 2014 environment to verify the efficacy of the proposed converter.","PeriodicalId":383674,"journal":{"name":"2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT)","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-03-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122531893","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Estimating multiple health parameters using PSoC controller","authors":"Pradnyal N. Patil, S. Sawant","doi":"10.1109/ICEEOT.2016.7755405","DOIUrl":"https://doi.org/10.1109/ICEEOT.2016.7755405","url":null,"abstract":"In the minds of people health has been a very important parameter, so a monitoring system is required to keep them alert about their health. Monitoring systems are also required in Intensive Care Unit of various hospitals. Hospital staff faces difficulty in handling devices due to their bulkiness and huge number of wires while giving medication to the patient. Monitoring system requirement is of very small size and low power operation. A small size, wearable device is presented in this paper, which consists of PSoC 4, photo interrupter and a very small size Bluetooth module. The system is totally wireless due to the use of Bluetooth module. Different sensors used are attached on the wrist for experimentation. Photo interrupter is used to read the data in the form of analog signal which is further amplified and converted to digital signal by ADC present in PSoC controller. PSoC is used mainly to reduce the system size, as both analog and digital peripherals are available inside a single chip. Due to this the discrete analog components such as OpAmp, ADC and Filter are reduced. Analog signal obtained from sensor is processed by the controller and the values of Heart Rate (Pulse wave) and Temperature are calculated. Temperature is obtained using the LM35 sensor. Total system is mounted on a PCB and sensors are taken out with the help of wires. The PCB design is embedded in a black box. System operates on 3.3V and current requirement is less that 50mA, as the deep sleep mode has been used in both PSoC and Bluetooth. The system is powered by a Lithium Ion battery. A wireless wearable system is built which gives two different parameters of health i.e. heart rate and body temperature. The problem faced by doctors and nurses can be reduced by using this small size and wireless device.","PeriodicalId":383674,"journal":{"name":"2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT)","volume":"24 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-03-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123967255","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}