International Journal for Simulation and Multidisciplinary Design Optimization最新文献_第6页

2D linear finite element simulation of laser metal heating for digital twins 数字孪生体激光金属加热的二维线性有限元模拟

International Journal for Simulation and Multidisciplinary Design Optimization Pub Date : 2021-01-01 DOI: 10.1051/smdo/2021011

D. Montoya-Zapata, Juan M. Rodríguez, A. Moreno, J. Posada, O. Ruiz-Salguero

{"title":"2D linear finite element simulation of laser metal heating for digital twins","authors":"D. Montoya-Zapata, Juan M. Rodríguez, A. Moreno, J. Posada, O. Ruiz-Salguero","doi":"10.1051/smdo/2021011","DOIUrl":"https://doi.org/10.1051/smdo/2021011","url":null,"abstract":"In the context of laser-based additive manufacturing, the thermal behavior of the substrate is relevant to define process parameters vis-à-vis piece quality. The existing literature focuses on two process variables: (a) lumped laser power and (b) process speed. However, this literature does not consider other variables, such as those related to the laser power distribution. To fill this vacuum, this manuscript includes the laser power spatial distributions (Gaussian, uniform circular and uniform rectangular) in addition to (a) and (b) above in 2D linear substrate heating simulations. The laser energy is modeled as a time dependent heat flux boundary condition on top of the domain. The total laser delivered power was identical for all spatial distributions. The results show that the laser intensity spatial distribution strongly affects the maximum temperature, and the depth and width of the heat affected zone. These 2D finite element simulations prove to be good options for digital twin based design environments, due to their simplicity and reasonable temperature error, compared to non-linear analysis (considered as ground truth for this case). Future publications address non-linear finite element simulations of the laser heating process (including convection and radiation and temperature dependent substrate properties).","PeriodicalId":37601,"journal":{"name":"International Journal for Simulation and Multidisciplinary Design Optimization","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"58004069","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 3

Modelling and analysis of cutting forces while micro end milling of Ti-alloy using finite element method 钛合金微端铣削切削力的有限元建模与分析

International Journal for Simulation and Multidisciplinary Design Optimization Pub Date : 2021-01-01 DOI: 10.1051/smdo/2021027

Narendra Bhople, S. Mastud, S. Satpal

{"title":"Modelling and analysis of cutting forces while micro end milling of Ti-alloy using finite element method","authors":"Narendra Bhople, S. Mastud, S. Satpal","doi":"10.1051/smdo/2021027","DOIUrl":"https://doi.org/10.1051/smdo/2021027","url":null,"abstract":"Micromilling is one of the preferable micro-manufacturing process, as it exhibits the flexibility to produce complex 3D micro-parts. The cutting forces generated in micro end milling can be attributed for tool vibration and process instability. If cutting forces are not controlled below critical limits, it may lead to catastrophic failure of tool. Cutting force has a significant role to decide the surface roughness. Therefore accurate prediction of cutting forces and selection of suitable cutting parameters mainly feed, is important while micro end milling. In present study, finite element method (FEM) based model has been developed by using ABAQUAS/Explicit 6.12 software. Von-Misses stresses and cutting forces are predicted while micro end milling of Ti-6Al-4V. Further, cutting forces were measured during experimentation using dynamometer mounted on micro-milling test bed. Cutting forces predicted by FEM model are in good agreement with the experimental force values. Obtained FEM results have been used to study the size effect in micro end milling process. Moreover, the effect of uncut chip thickness to cutting edge radius ratio (h/rc) on surface roughness (Ra) has been studied. It is found the feed 2.5 µm/tooth is suitable value to produce optimum surface roughness and cutting forces.","PeriodicalId":37601,"journal":{"name":"International Journal for Simulation and Multidisciplinary Design Optimization","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"58005014","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 4

Optimization of friction STIR welded AA6061 + SiCp metal matrix composite to increase joint tensile strength and reduce defects 优化搅拌摩擦焊AA6061 + SiCp金属基复合材料，提高接头抗拉强度，减少缺陷

International Journal for Simulation and Multidisciplinary Design Optimization Pub Date : 2021-01-01 DOI: 10.1051/smdo/2021028

N. Dilip Raja, R. Naren Shankar

{"title":"Optimization of friction STIR welded AA6061 + SiCp metal matrix composite to increase joint tensile strength and reduce defects","authors":"N. Dilip Raja, R. Naren Shankar","doi":"10.1051/smdo/2021028","DOIUrl":"https://doi.org/10.1051/smdo/2021028","url":null,"abstract":"Friction stir welding has been used in automobiles, locomotive, and aircraft structures. This metal joining process exhibits defects like kissing bonds, micropores, and tunnels. Factors like the joining material, joint thickness, tool geometry, and operating parameters control the defects in friction stir welding. The parameters like tool rotation, tool pass speed, and tool force have a greater influence on the joint quality. In this study, these parameters are considered to augment the strength of the joint and minimize defects. The metal matrix composite consisting of AA6061 matrix and 10 wt. % SiCp reinforcement is joined used FSW. The weld parameters were varied between 731 and 1068 rpm tool rotation speed, 0.33 and 1.17 mm/s tool pass speed, and 11 and 28 MPa tool force. The joint strength varied from 165 MPa to 244 MPa. The numerical analysis using ANOVA revealed that compared between the three parameters, the tool force had greater control over the tensile strength of the joint. After optimization, the joint was made at a tool rotation speed of 910 rpm, tool pass speed of 0.77 mm/s, and tool force of 22.33 MPa. The tensile strength increased to 249 MPa after using the optimized weld parameters. The number of defects in the joint was reduced after using the optimized weld parameters.","PeriodicalId":37601,"journal":{"name":"International Journal for Simulation and Multidisciplinary Design Optimization","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"58005076","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 2

Numerical simulation and experimentation of endodontic file using Taguchi DoE Taguchi DoE牙髓锉的数值模拟与实验

International Journal for Simulation and Multidisciplinary Design Optimization Pub Date : 2021-01-01 DOI: 10.1051/smdo/2021032

Pravin R. Lokhande, S. Salunkhe, S. Balaguru

{"title":"Numerical simulation and experimentation of endodontic file using Taguchi DoE","authors":"Pravin R. Lokhande, S. Salunkhe, S. Balaguru","doi":"10.1051/smdo/2021032","DOIUrl":"https://doi.org/10.1051/smdo/2021032","url":null,"abstract":"The endodontic file is a tapered, needle shape body used for the preparation of curved human root canals. During the preparation, process files get failed due to the locking action offered by the canal wall. The present study aimed to find the fatigue life of endodontic files at 23°, 33° and 43° root canal curvature angles. Four brands of files were selected for the present study viz. Hyplex CM, Pro-Taper Next, Hero Shaper, Pro-File Vortex. The strain life analysis done using ANSYS showed that the Hyplex CM file gives the highest fatigue life at 23°, 33° and 43° root canal curvature angles. Therefore, Hyplex CM file was selected for DoE Taguchi Optimization study. Each experimental reading was conducted on X Smart Plus experimental setup under purely rotary and combined reciprocating-rotary motion, at 500 rpm, 600 rpm and 700 rpm and 23°, 33° and 43° root canal curvature angles. Hyplex CM file given maximum fatigue life at 23° root canal curvature angle and 500 rpm speed of rotation. But if file motion is combined rotary-reciprocating, life reduces. The ANNOVA study showed that P-value and significance F are very small, which represented that the regression model is effective.","PeriodicalId":37601,"journal":{"name":"International Journal for Simulation and Multidisciplinary Design Optimization","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"58005158","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 2

A novel graphene pressure sensor with zig–zag shaped piezoresistors for maximum strain coverage for enhancing the sensitivity of the pressure sensor 一种新型的石墨烯压力传感器，其锯齿形压电阻具有最大的应变覆盖范围，以提高压力传感器的灵敏度

International Journal for Simulation and Multidisciplinary Design Optimization Pub Date : 2021-01-01 DOI: 10.1051/smdo/2021013

Meetu Nag, Ajay Kumar, B. Pratap

引用次数: 5

Design and analysis of elevator wire ropes 电梯钢丝绳的设计与分析

International Journal for Simulation and Multidisciplinary Design Optimization Pub Date : 2021-01-01 DOI: 10.1051/smdo/2021021

Anil Babu Seelam, Mohammad Saif Jawed, Sachidananda Hassan Krishanmurthy

引用次数: 1

Effect of lamination schemes on natural frequency and modal damping of fiber reinforced laminated beam using Ritz method 用Ritz法研究层合方案对纤维增强层合梁固有频率和模态阻尼的影响

International Journal for Simulation and Multidisciplinary Design Optimization Pub Date : 2021-01-01 DOI: 10.1051/smdo/2021016

Somi Naidu Balireddy, P. Jeyaraj, Lenin Babu Mailan Chinnapandi, Chintapalli Vsn Reddi

引用次数: 0

Stage reduced counter-rotating axial compressor for jet engine 喷气发动机级减速器反向旋转轴向压气机

International Journal for Simulation and Multidisciplinary Design Optimization Pub Date : 2021-01-01 DOI: 10.1051/SMDO/2021006

F. Ferdaus, Nitish Kumar, G. Sakthivel, N. Raghukiran

{"title":"Stage reduced counter-rotating axial compressor for jet engine","authors":"F. Ferdaus, Nitish Kumar, G. Sakthivel, N. Raghukiran","doi":"10.1051/SMDO/2021006","DOIUrl":"https://doi.org/10.1051/SMDO/2021006","url":null,"abstract":"Variation in the states of system, mass flow and pressure are some of the disturbances which are experienced by the compressors in the jet engine under working condition. One of the main factors that influence the efficiency of a jet engine is the pressure ratio. In order to achieve the required pressure ratio, we should have relatively a greater number of stages in the compressor that leads to an increase in the weight of the engine. The stator and rotor are the essential parts of an aircraft's axial compressor. CFD is used in order to evaluate the pressure ratio. In this paper, we are going to analyze a three-stage compressor instead of an actual six-stage compressor. The mass flow rate inside the control system can be used to maintain the stability of the system. Compressor weight and pressure ratio at each stage can be reduced if we have a clockwise and anti-clockwise rotating rotor. With the use of a universal gear system, the two clockwise rotors and one anti-clockwise rotor were analyzed. The main outlook of this work is to show the maximum pressure ratio of the compressor at the outlet with our desired configurations. In conclusion, it was shown that the weight of the aircraft engine can be effectively reduced.","PeriodicalId":37601,"journal":{"name":"International Journal for Simulation and Multidisciplinary Design Optimization","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"58002479","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 2

Binary goal programming model for optimizing tire selection using branch and bound algorithm 用分支定界算法优化轮胎选择的二元目标规划模型

International Journal for Simulation and Multidisciplinary Design Optimization Pub Date : 2021-01-01 DOI: 10.1051/smdo/2021008

S. Aly

{"title":"Binary goal programming model for optimizing tire selection using branch and bound algorithm","authors":"S. Aly","doi":"10.1051/smdo/2021008","DOIUrl":"https://doi.org/10.1051/smdo/2021008","url":null,"abstract":"The problem of assessment and adoption of automotive tyre design specifications has not been addressed sufficiently in literature. This is in spite of its significance as a crucial component relevant to design and safety of the automobile. In this paper, a multi-objective optimization model of the tyre design trademark adoption decision is proposed. Multi-attribute or multi-criterion decision making techniques are heuristics providing good solution, but do not guarantee optimum solution. Up to date, there is no optimal yielding method for selection of vehicle tyre manufacturer or trademark based on prespecified design targets. The proposed model is formulated as a binary goal programming model for optimizing tyre trademark design selection decision by adopting an optimal tyre design trademark that best achieve design targets. The model is solved by the branch and bound algorithm. One advantage of the proposed model is flexibility to incorporate multiple design targets, tolerance limits and different constraints. The proposed model can support efficient and effective decision making concerning the adoption of tyre trademark design for new automobile or to re-adopt new design for new road vehicle operating conditions.","PeriodicalId":37601,"journal":{"name":"International Journal for Simulation and Multidisciplinary Design Optimization","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"58003145","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 2

Design and simulation of multilayer hybrid foam material for acoustic application 声学应用多层混合泡沫材料的设计与仿真

International Journal for Simulation and Multidisciplinary Design Optimization Pub Date : 2021-01-01 DOI: 10.1051/smdo/2021012

L. Yuvaraj, S. Jeyanthi, Lenin Babu Mailan Chinnapandi, E. Jayamani

{"title":"Design and simulation of multilayer hybrid foam material for acoustic application","authors":"L. Yuvaraj, S. Jeyanthi, Lenin Babu Mailan Chinnapandi, E. Jayamani","doi":"10.1051/smdo/2021012","DOIUrl":"https://doi.org/10.1051/smdo/2021012","url":null,"abstract":"New acoustic multilayer absorber fabricated by coupling closed-cell metallic foam and open-cell polymeric foam, which aimed to develop a practical use of metallic foam in the noise control application. In prior, the individual sound absorption coefficient of both foam materials with different thicknesses measured by the impedance tube method as per ASTM E-1050. Using inverse characterization technique, the intrinsic properties needed for five parameter models in a numerical study are predicted. The measured characteristic impedance, complex wave propagation, and sound absorption coefficient of the individual foams are in close agreement with the prediction. Subsequently, a different configuration of multilayer absorber is modeled using obtained properties, and their acoustic performance is evaluated. The result indicates that the coupling of polymeric foam with metallic one exhibits enhanced sound absorption and usage of closed-cell metallic foam in noise control material. Furthermore, the result demonstrates that absorption capability entirely relies on the placement of polymeric foam in the configuration. The proposed hybrid multilayer absorber coupled with test bench car for interior acoustic study, where 5–30 dB is reduction is noticed in 1/3rd octave plot.","PeriodicalId":37601,"journal":{"name":"International Journal for Simulation and Multidisciplinary Design Optimization","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"58004103","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1