2011 Fourth International Conference on Intelligent Computation Technology and Automation最新文献

Research on Bivariate Interpolation Mathematical Model of Ink Key Presetting Based on CIP3 基于CIP3的墨水键预置二元插值数学模型研究

2011 Fourth International Conference on Intelligent Computation Technology and Automation Pub Date : 2011-03-28 DOI: 10.1109/ICICTA.2011.451

Wu Qiumin, Wu Jimei, L. Lijuan

{"title":"Research on Bivariate Interpolation Mathematical Model of Ink Key Presetting Based on CIP3","authors":"Wu Qiumin, Wu Jimei, L. Lijuan","doi":"10.1109/ICICTA.2011.451","DOIUrl":"https://doi.org/10.1109/ICICTA.2011.451","url":null,"abstract":"The key problem of the ink key presetting is to build the mathematical model which can reflect the relationship between plate information and the ink key opening accurately. The present mathematical model built was used the least square method and only considered the halftone dot coverage and the ink opening. The model was univariate function model and can not explain the same halftone dot coverage with the different ink opening. For this, based on the CIP3 ink presetting technique, the data stream of the prepress was analyzed and compared with the experimental data, then 1-bit tiff images after RIP was selected as the data resources for ink zone control. Based on the system identification theory, the three-dimensional mathematical model was built by the bivariate interpolation method, which can reflect the relationship between halftone dot coverage (the distribution of the ink zone was considered) and the ink key opening. The model was validated by the experiment. The calculation accuracy of this model and the model in literature built by the least square method was compared by the squared error theory. The result showed that the former (the model built by the bivariate interpolation method) has higher calculation accuracy than the later. It provided the foundation for combination of color management and ink preset in prepress, and provided basis for ink key opening preset rapidly and accurately.","PeriodicalId":368130,"journal":{"name":"2011 Fourth International Conference on Intelligent Computation Technology and Automation","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-03-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115313046","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

LFM Radar Signal Processing Based on Multi-model Kalman Filter 基于多模卡尔曼滤波的LFM雷达信号处理

2011 Fourth International Conference on Intelligent Computation Technology and Automation Pub Date : 2011-03-28 DOI: 10.1109/ICICTA.2011.433

W. Jianhua, Xie Fei, Wang Yuncheng, Yang Kaihe

引用次数: 0

Research in Multiple Factors Vibration Controlling of CNC Milling Machine 数控铣床多因素振动控制研究

2011 Fourth International Conference on Intelligent Computation Technology and Automation Pub Date : 2011-03-28 DOI: 10.1109/ICICTA.2011.131

Li Kang-ju, Liu Yong-xian, Zhao Zhe

引用次数: 0

Design of Permanent Magnet Synchronous Motor Servo Systems Based on Sliding-Mode Control 基于滑模控制的永磁同步电机伺服系统设计

2011 Fourth International Conference on Intelligent Computation Technology and Automation Pub Date : 2011-03-28 DOI: 10.1109/ICICTA.2011.169

Hu Zheng

引用次数: 1

An Empirical Study on Causality between Financial Development and Economic Growth of Fujian Province 福建省金融发展与经济增长因果关系实证研究

2011 Fourth International Conference on Intelligent Computation Technology and Automation Pub Date : 2011-03-28 DOI: 10.1109/ICICTA.2011.550

Li-fang Zhang, Fu-jing Zhang

引用次数: 3

Active Control of Approximate Finite-time Stability for Chaotic System of Permanent Magnet Synchronous Motor 永磁同步电机混沌系统的近似有限时间稳定性主动控制

2011 Fourth International Conference on Intelligent Computation Technology and Automation Pub Date : 2011-03-28 DOI: 10.1109/ICICTA.2011.94

Zhao Jianli, Wang Jing, Wang Hui

引用次数: 1

Simulation on Temperature and Humidity Nonlinear Controller of Greenhouses 温室温湿度非线性控制器的仿真研究

2011 Fourth International Conference on Intelligent Computation Technology and Automation Pub Date : 2011-03-28 DOI: 10.1109/ICICTA.2011.138

Wu Xiu-hua, Zhao Lei

引用次数: 2

Notice of Violation of IEEE Publication PrinciplesPipelined-MapReduce: An Improved MapReduce Parallel Programing Model 管道MapReduce:一种改进的MapReduce并行编程模型

2011 Fourth International Conference on Intelligent Computation Technology and Automation Pub Date : 2011-03-28 DOI: 10.1109/ICICTA.2011.593

Li Wang, Zhiwei Ni, Yiwen Zhang, Zhangjun Wu, Liyang Tang

引用次数: 4

Integration of Computer Aided Design and Analysis Using the Absolute Nodal Coordinate Formulation 基于绝对节点坐标公式的计算机辅助设计与分析集成

2011 Fourth International Conference on Intelligent Computation Technology and Automation Pub Date : 2011-03-28 DOI: 10.1109/ICICTA.2011.48

P. Lan, Man-shing Liu

{"title":"Integration of Computer Aided Design and Analysis Using the Absolute Nodal Coordinate Formulation","authors":"P. Lan, Man-shing Liu","doi":"10.1109/ICICTA.2011.48","DOIUrl":"https://doi.org/10.1109/ICICTA.2011.48","url":null,"abstract":"The goal of this study is to develop a new procedure for the integration of computer aided design and analysis (ICADA) using absolute nodal coordinate formulation (ANCF). Bezier, B-spline and NURBS are widely used as geometric description in CAD system. A new computer procedure is introduced for the integration of geometric description and the ANCF finite element analysis. The procedure is based on developing a linear transformation that can be used to transform systematically the Bezier and B-spline representation to an ANCF finite element mesh preserving the same geometry. To describe complex geometric shapes such as rational Bezier and NURBS curves that can not be described using non-rational finite element methods, a new rational absolute nodal coordinate formulation (RANCF) is used. RANCF finite elements will preserve the important properties of ANCF finite elements that allow for straight forward implementation of general nonlinear constitutive equations in the case of beam, plate and shell structures. RANCF finite elements will correctly describe arbitrary rigid body displacement and will lead to constant mass matrix by assuming that the weights that enter into the formulation of the rational functions remain constant. As a consequence, the Coriolis and centrifugal forces will be identically equal to zero in this new formulation. Using the transformation developed in this paper, the equations of motion of a finite element mesh that represents exactly the geometry used in CAD system can be developed. Such a linear transformation will facilitate the ICADA. A large strain theory is used to formulate the nonlinear elastic forces. Numerical examples are presented in order to demonstrate the use of the computer implementation of the method.","PeriodicalId":368130,"journal":{"name":"2011 Fourth International Conference on Intelligent Computation Technology and Automation","volume":"92 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-03-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125900985","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 7

A Study on the Bioenergy Crop Production Function of Land Use in China 中国土地利用生物能源作物生产函数研究

2011 Fourth International Conference on Intelligent Computation Technology and Automation Pub Date : 2011-03-28 DOI: 10.1109/ICICTA.2011.296

Z. Kun, Duan Jiannan, Y. Jun, L. Ping

引用次数: 1