2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA)最新文献

Experimental Test on Utilization of Waste Heat from Grilling Stove for Developing Self-Rotating Fan System 利用烤炉余热开发自转风机系统的试验研究

2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA) Pub Date : 2020-11-18 DOI: 10.1109/ICSEEA50711.2020.9306171

D. Sagita

{"title":"Experimental Test on Utilization of Waste Heat from Grilling Stove for Developing Self-Rotating Fan System","authors":"D. Sagita","doi":"10.1109/ICSEEA50711.2020.9306171","DOIUrl":"https://doi.org/10.1109/ICSEEA50711.2020.9306171","url":null,"abstract":"The grilling process in conventional grills generally requires a fanning system to maintain the charcoal embers to be stable. At the same time, there is heat energy lost into the environment by conduction through a grill. This study discussed the use of waste heat from a conventional grilling stove to produce energy to drive the self-rotating fan system. The component used was the thermoelectric module type TEG SP1848 which can convert heat energy into electrical energy. The experiment was carried out in two stages. The first step was testing the temperature characteristics produced on both the hot-side and cold-side of thermoelectric using 2 treatments (with water in the heatsink and without water). The second stage was the experiment by using 3 variations of the thermoelectric configuration i.e. single module, a double module using a series circuit, and a double module using a parallel circuit. Observation results had shown that the use of water can stabilize the temperature on the cold side of TEG and the temperature was lower than without water. Besides, there was a positive trend indication between $Delta$T and voltage as well as $Delta$T and electric current where increase in $Delta$T increase in voltage and current so that the power generated was also higher. The power generated during the grilling process had been able to rotate the 3 V DC self-rotating fan system. Experimental results had shown that the use of a dual parallel configuration produced the highest power with an average voltage of l.SO V, an electric current of 1.8 mA, and an average $Delta$T of 48. 8°C.","PeriodicalId":367065,"journal":{"name":"2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA)","volume":"412 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124411955","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

The Study of Shared-Autonomous Vehicle Design Concept for Urban Public Transportation in Indonesia 印尼城市公共交通共享自动驾驶汽车设计理念研究

2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA) Pub Date : 2020-11-18 DOI: 10.1109/ICSEEA50711.2020.9306124

Yukhi Mustaqim Kusuma Sya'Bana, Kadek Heri Sanjaya

{"title":"The Study of Shared-Autonomous Vehicle Design Concept for Urban Public Transportation in Indonesia","authors":"Yukhi Mustaqim Kusuma Sya'Bana, Kadek Heri Sanjaya","doi":"10.1109/ICSEEA50711.2020.9306124","DOIUrl":"https://doi.org/10.1109/ICSEEA50711.2020.9306124","url":null,"abstract":"An integrated public transport system in the urban areas has been a great challenge in Indonesia, especially regarding connectivity between the mass transport modes with the first mile/last mile (FMLM) transport. This study discusses the application of universal design (UD) for future urban public transport in Indonesia which will be based on electrically powered autonomous vehicles (AV). The universal design concept of AV coupled with the sharing economy concept will allow the realization of a transport system that is both eco-friendly and user-friendly. The sharing economy will optimize the consumption pattern by preventing the occurrence of excessive usage of resources and underutilized assets. The concept of UD involves seven principles approach which covers equitable use, flexibility in use, simple and intuitive use, perceptible information, tolerance for error, low physical effort, size and space for approach and use. The design concept illustrates the application of UD and sharing economy through the design of smartphone platform applications, AV fleets, supporting infrastructure tailored for AV operation, and ideation. The applicability of UD and sharing economy in the future urban AV will increase the possibility of its adoption in the public transport system. The concept will define the features necessary for an ideal scenario of the ideation process. Furthermore, accessibility is the key to the UD approach, as the principle will allow not only people with special needs but a wide range of users to use it more easily. The application of this concept, in the end, will induce urban population to use public transport instead of private vehicles that create traffic congestion.","PeriodicalId":367065,"journal":{"name":"2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA)","volume":" 15","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120830026","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1

[ICSEEA 2020 Front cover] [ICSEEA 2020年封面]

2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA) Pub Date : 2020-11-18 DOI: 10.1109/icseea50711.2020.9306180

引用次数: 0

Optimal Placement and Sizing of PV as DG for Losses Minimization Using PSO Algorithm: a Case in Purworejo Area 基于PSO算法的损失最小化PV作为DG的最优布局和规模:以Purworejo地区为例

2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA) Pub Date : 2020-11-18 DOI: 10.1109/ICSEEA50711.2020.9306134

Muhammad Galih Sukma Wicaksana, L. M. Putranto, Fikri Waskito, Muhammad Yasirroni

{"title":"Optimal Placement and Sizing of PV as DG for Losses Minimization Using PSO Algorithm: a Case in Purworejo Area","authors":"Muhammad Galih Sukma Wicaksana, L. M. Putranto, Fikri Waskito, Muhammad Yasirroni","doi":"10.1109/ICSEEA50711.2020.9306134","DOIUrl":"https://doi.org/10.1109/ICSEEA50711.2020.9306134","url":null,"abstract":"The Total distribution system losses of PT PLN ULP Purworejo reach 10.467%as technical and non-technical losses which were very high compare to the maximum limit (5%). In this research, Photovoltaics (PV) Distributed Generation (DG) was installed as an active power injection to reduce the system’s losses. This research determined the hosting capacity of PV including the location and capacity of the PV. The problem was modeled into an optimization problem and was simulated using Particle Swarm Optimization (PSO) algorithm in MATLAB environment. The simulation was considered the voltage, power factor (pf), and branch current as constraints. The simulation was conducted on the existing system of Feeder 7 of PT PLN ULP Purworejo distribution system. Backward Forward Sweep (BFS) method was used for load flow analysis. As the load flow analysis result, the technical losses on a feeder 7 reach 2.676% of feeder 7 supply. The simulation results showed that by installing optimal distributed PV, the technical losses in feeder 7 were reduced to 1.351%. The overall losses of PT PLN ULP Purworejo become 10.045%.","PeriodicalId":367065,"journal":{"name":"2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA)","volume":"98 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126254927","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 3

[ICSEEA 2020 Committees]

2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA) Pub Date : 2020-11-18 DOI: 10.1109/icseea50711.2020.9306145

引用次数: 0

Conceptual Design of Universal Autonomous Platform for Micromobility and Delivery System in the Hospital 医院微移动与输送系统通用自主平台概念设计

2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA) Pub Date : 2020-11-18 DOI: 10.1109/ICSEEA50711.2020.9306126

Kadek Heri Sanjaya, Yukhi Mustaqim Kusuma Sya'Bana, P. Widiyanto, H. Saputra, C. H. A. Baskoro

{"title":"Conceptual Design of Universal Autonomous Platform for Micromobility and Delivery System in the Hospital","authors":"Kadek Heri Sanjaya, Yukhi Mustaqim Kusuma Sya'Bana, P. Widiyanto, H. Saputra, C. H. A. Baskoro","doi":"10.1109/ICSEEA50711.2020.9306126","DOIUrl":"https://doi.org/10.1109/ICSEEA50711.2020.9306126","url":null,"abstract":"Micro mobility is described as either human-powered or electrically-powered vehicle with maximum speed of 25 km/h and weight of less than 500 kg. The hospital trolleys for delivery of medical supplies are one example of micro mobility. This study introduces the conceptual design of a universal autonomous platform as a replacement for the hospital trolleys to solve the problem of musculoskeletal complaints among the trolley operators. The introduction of the Industry 4.0 concept involving the internet of things (IoT) and the cyber-physical system has made the idea possible to realize. In the first stage, we performed problems seeking ergonomic and design issues on the current trolleys by observation and interview. As expected, manual materials handling (MMH) to operate the trolley manually induces musculoskeletal complaints especially low back pain. The ergonomic problems then analyzed and taken into design consideration thoroughly during the design process. In the design concept, we will eliminate MMH as much as possible by the introduction of an autonomous micro vehicle as a modular platform. The modular platform will be able to accommodate various types of the superstructure to perform the various functions which the current hospital trolleys are serving.","PeriodicalId":367065,"journal":{"name":"2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA)","volume":"83 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124797664","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1

Implementation of Photovoltaic Water Spray Cooling System and Its Feasibility Analysis 光伏水雾冷却系统的实现及其可行性分析

2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA) Pub Date : 2020-11-18 DOI: 10.1109/ICSEEA50711.2020.9306133

A. Risdiyanto, A. Kristi, B. Susanto, N. A. Rachman, Agus Junaedi, Ersalina Werda Mukti

{"title":"Implementation of Photovoltaic Water Spray Cooling System and Its Feasibility Analysis","authors":"A. Risdiyanto, A. Kristi, B. Susanto, N. A. Rachman, Agus Junaedi, Ersalina Werda Mukti","doi":"10.1109/ICSEEA50711.2020.9306133","DOIUrl":"https://doi.org/10.1109/ICSEEA50711.2020.9306133","url":null,"abstract":"This paper discusses the effects of applying a cooling system on photovoltaic (PV) designed using water sprays controller to improve efficiency and increasing power output. The cooling system was attached on existing 400 W polycrystalline PV panels. The PV temperature is maintained by controller at 30° C against rising temperatures above it by spraying water using 32 nozzles on the back side of the panel surface. PV testing with cooling system was carried out by including non-cooled PV panels for comparison. Then effect of temperature on the PV output power including the cooling system losses analyzed, net power and increasing in efficiency presented. Finally, the overall use of a water spray cooling system on PV panels was evaluated. Test results showed the PV output power with the cooling system increased by 9.03% compared to the non-cooled PV. The increase in temperature per degree above 30 °C caused PV output power decreases 0.411%. Overall, by involving the calculation of system losses the net PV output power gain becomes 4.09%.","PeriodicalId":367065,"journal":{"name":"2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA)","volume":"79 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116620292","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 2

Gravitational Water Vortex Hydropower: Experimental Investigation of Free Surface Wave in Water Intake Channel 重力水涡旋水力发电:取水通道自由表面波的实验研究

2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA) Pub Date : 2020-11-18 DOI: 10.1109/ICSEEA50711.2020.9306128

Reza Huwae, Anjar Susatyo, Ridwan Arief Subekit, Henny Sudibyo, D. S. Khaerudini

{"title":"Gravitational Water Vortex Hydropower: Experimental Investigation of Free Surface Wave in Water Intake Channel","authors":"Reza Huwae, Anjar Susatyo, Ridwan Arief Subekit, Henny Sudibyo, D. S. Khaerudini","doi":"10.1109/ICSEEA50711.2020.9306128","DOIUrl":"https://doi.org/10.1109/ICSEEA50711.2020.9306128","url":null,"abstract":"Development program for construction of irrigation channel gives big opportunity for development of renewable energy from small low head hydropower source. The use of hydropower gives no negative impact to environment, especially for greenhouse emission. A gravitational vortex hydropower is the object of this study, with the focus on the water intake channel using rectangular geometry. An experimental study was conducted to find the influencing parameters on the intake section of the gravitational vortex hydropower. A set of parameters were varied to determine which parameters affecting the water surface at the intake channel. By analyzing the results of the experiments, the influence of parameters on the water intake channel of gravitational vortex hydropower was found. A performance curve for differentiation of flow type and identification of surface contour has been made. Based on the results of the experiment, placing a strainer at 5 cm distance gave 60% higher output power since this setting could reduce the wave speed. Recommendation to have further study in non-dimensional parametric should be considered for increasing efficiency of the gravitational vortex hydropower.","PeriodicalId":367065,"journal":{"name":"2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA)","volume":"96 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114694575","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Optimal PV Farm Size and Location Determination in Kudus Distribution System Using Particle Swarm Optimization (PSO) 基于粒子群算法(PSO)的Kudus配电系统最优光伏电站规模与选址

2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA) Pub Date : 2020-11-18 DOI: 10.1109/ICSEEA50711.2020.9306125

Ramadhan Faris Hakiim, Wardaniawan, Veby Riska Afrina, L. M. Putranto, Tiyono

引用次数: 1

The Influence of NaCl Concentration on Performance of Palm Oil Fuel Heater System NaCl浓度对棕榈油燃料加热系统性能的影响

2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA) Pub Date : 2020-11-18 DOI: 10.1109/ICSEEA50711.2020.9306182

G. Alvianingsih, Auliya Sutra, Yozika Arvio, Tino Rico Sinaga, Rianis Parman, I. Garniwa

{"title":"The Influence of NaCl Concentration on Performance of Palm Oil Fuel Heater System","authors":"G. Alvianingsih, Auliya Sutra, Yozika Arvio, Tino Rico Sinaga, Rianis Parman, I. Garniwa","doi":"10.1109/ICSEEA50711.2020.9306182","DOIUrl":"https://doi.org/10.1109/ICSEEA50711.2020.9306182","url":null,"abstract":"The high utilization and exploitation of fossil fuel have adverse environmental impacts and efforts to overcome these problems are called for. One of the options is to replace fossil fuel with palm oil which has many similar characteristics with diesel fuel. However, palm oil has a higher viscosity level than diesel oil which may cause imperfect atomization in the nozzle. As a result, a heater is needed to alter the viscosity of the palm oil to be comparable to diesel oil. This research aims to analyze the influence of NaCl concentration in the water heater to the performance of the palm oil heater system. The study was conducted experiments on existing water heater on the Palm Oil Fuel Heater System. NaCl is added to the water heater with a concentration of 2%, 4%, 6%, 8%, and 10%, and be compared with a pure water heater as a reference. From the experiment, known that an increase in NaCl concentration will cause an increase in the boiling point of the water heater, a reduction in heating time, an increase in the output temperature of palm oil. By adding 10% NaCl to the water heater, the heating time will be reduced by 13,6%. However, the addition of this concentration will also cause less optimal heat propagation by conduction from the water heater to palm oil.","PeriodicalId":367065,"journal":{"name":"2020 International Conference on Sustainable Energy Engineering and Application (ICSEEA)","volume":"101 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126577469","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0