2008 11th International Conference on Optimization of Electrical and Electronic Equipment最新文献_第8页

Design and optimization of an open stripline resonator for rubber thickness gauging 橡胶厚度测量用开式带状线谐振器的设计与优化

2008 11th International Conference on Optimization of Electrical and Electronic Equipment Pub Date : 2008-05-22 DOI: 10.1109/OPTIM.2008.4602506

N. Ida, O. Bhuiya

{"title":"Design and optimization of an open stripline resonator for rubber thickness gauging","authors":"N. Ida, O. Bhuiya","doi":"10.1109/OPTIM.2008.4602506","DOIUrl":"https://doi.org/10.1109/OPTIM.2008.4602506","url":null,"abstract":"A stripline resonator was designed, analyzed and optimized for production line gauging and monitoring of rubber thickness. The sensor is intended to gauge the thickness of rubber during production as it passes on a steel calendar or drum. The need for high accuracy, real time measurements and continuous coverage of the material necessitated a unique approach to the design including simulation and system development. The current work describes modeling, simulation and optimization of system parameters for an in-plant system designed for gauging purposes. The final production system will consist of a single open stripline resonator moving back and forth across the width of the dielectric sampling the material continuously. A network analyzer is used for monitoring of the system's resonant frequency because of its accuracy, ruggedness and because its interface allows continuous modifications, analysis and monitoring across the internet so that engineers can remotely monitor the production, the quality of the product and intervene as needed. A computer monitors the motion of the sensor across the fabric, marks the location of the sensor and records the output together with time signatures and material data for later reference. Optimization of various parameters - size, sensitivity, interference and others was carried out using FDTD simulation.","PeriodicalId":244464,"journal":{"name":"2008 11th International Conference on Optimization of Electrical and Electronic Equipment","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2008-05-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129164826","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 2

From a manually driven stand alone PV plant to a remotely monitored and intelligently managed one 从手动驱动的独立光伏电站到远程监控和智能管理的光伏电站

2008 11th International Conference on Optimization of Electrical and Electronic Equipment Pub Date : 2008-05-22 DOI: 10.1109/OPTIM.2008.4602437

S. Kaplanis, E. Kaplani, E. Eumorphopoulos-Daviskas, D. Marinescu

{"title":"From a manually driven stand alone PV plant to a remotely monitored and intelligently managed one","authors":"S. Kaplanis, E. Kaplani, E. Eumorphopoulos-Daviskas, D. Marinescu","doi":"10.1109/OPTIM.2008.4602437","DOIUrl":"https://doi.org/10.1109/OPTIM.2008.4602437","url":null,"abstract":"The paper outlines a stand alone (S.A.) PV plant of 3 kWp linked to an agro-refrigeration unit during summer period and to the loads of the solar energy laboratory the rest of the year. It also describes the procedures followed to convert it to a remotely monitored one using the Web services. The signals and data from the different elements of the PV plant are managed through MatLab software loaded in a PC dedicated to the plant. For this purpose, a special data acquisition and management system was developed. In addition, the global solar radiation along with other signals from the Meteo Station, were transferred to the same PC. A solar radiation prediction model, developed in MatLab, was used to provide ex ante the energy to be delivered by the PV generator during a day. The PC is linked to the Web, where PV data are presented on line. It is, then, possible to remotely control and manage the PV plant by distance, on a daily basis. In this mode, the loads are prioritized, so that the daily energy harvested may power the loads according to their priority.","PeriodicalId":244464,"journal":{"name":"2008 11th International Conference on Optimization of Electrical and Electronic Equipment","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2008-05-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129186292","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 3

Low-speed performance of the stator current-based MRAS estimator with FL controller in the sensorless induction motor drive 无传感器感应电机驱动中基于定子电流的FL控制器MRAS估计器的低速性能

2008 11th International Conference on Optimization of Electrical and Electronic Equipment Pub Date : 2008-05-22 DOI: 10.1109/OPTIM.2008.4602460

M. Dybkowski, T. Orłowska-Kowalska

引用次数: 8

Pre-determination by simulation of dynamic regime for direct current motors 直流电动机动态状态模拟的预确定

2008 11th International Conference on Optimization of Electrical and Electronic Equipment Pub Date : 2008-05-22 DOI: 10.1109/OPTIM.2008.4602396

I. Vlad, A. Câmpeanu, S. Enache, M. Enache

引用次数: 1

Single-phase power conditioner with reduced low-frequency current ripple for fuel cells in distributed Generation Applications 用于分布式发电中燃料电池的低频电流纹波减小单相电源调节器

2008 11th International Conference on Optimization of Electrical and Electronic Equipment Pub Date : 2008-05-22 DOI: 10.1109/OPTIM.2008.4602433

C. Pica, M. Bollero, A. Bollero, A. Tencbni, L. Limongi

引用次数: 3

A novel procedure and apparatus for measuring the radon concentration in air 一种测量空气中氡浓度的新方法和仪器

2008 11th International Conference on Optimization of Electrical and Electronic Equipment Pub Date : 2008-05-22 DOI: 10.1109/OPTIM.2008.4602526

G. Morariu, P. Ogrutan, C. Kertesz, M. Alexandru, G. Pana

引用次数: 3

Electromagnetic, thermal and mechanical design of a linear PM valve actuator laboratory model 电磁学、热学和力学设计了一种线性永磁阀执行机构的实验室模型

2008 11th International Conference on Optimization of Electrical and Electronic Equipment Pub Date : 2008-05-22 DOI: 10.1109/OPTIM.2008.4602418

I. Boldea, S. Agarlita, F. Marignetti, L. Tutelea

引用次数: 6

Modular test bench for a hybrid electric vehicle with multiples energy sources 多能源混合动力汽车模块化试验台

2008 11th International Conference on Optimization of Electrical and Electronic Equipment Pub Date : 2008-05-22 DOI: 10.1109/OPTIM.2008.4602424

C. Lungoci, D. Bouquain, A. Miraoui, E. Helerea

引用次数: 24

Dynamic calibration of remote multisensors using inverse problem solution 基于逆问题求解的远程多传感器动态标定

2008 11th International Conference on Optimization of Electrical and Electronic Equipment Pub Date : 2008-05-22 DOI: 10.1109/OPTIM.2008.4602462

D. Necsulescu, R. Jassemi-Zargani, J. Sasiadek

引用次数: 0

Enhancing the control range of a matrix converter with common mode free output voltage 提高具有共模自由输出电压的矩阵变换器的控制范围

2008 11th International Conference on Optimization of Electrical and Electronic Equipment Pub Date : 2008-05-22 DOI: 10.1109/OPTIM.2008.4602408

M. Braun, Alexander Stahl

引用次数: 7