2018 International Conference on Power, Energy, Control and Transmission Systems (ICPECTS)最新文献

筛选
英文 中文
Survey on NEM Relays Integrated with Schmitt Trigger Based Multi Threshold CMOS SRAM 基于Schmitt触发器的多阈值CMOS SRAM集成NEM继电器研究
M. Hemalatha, M. Shamili, C. Karthick
{"title":"Survey on NEM Relays Integrated with Schmitt Trigger Based Multi Threshold CMOS SRAM","authors":"M. Hemalatha, M. Shamili, C. Karthick","doi":"10.1109/ICPECTS.2018.8521572","DOIUrl":"https://doi.org/10.1109/ICPECTS.2018.8521572","url":null,"abstract":"NEMS are of submicron range which are useful to obtain high fundamental frequencies without having any impact on its mechanical response. NEM Relay is a switch made of nano meter scale using semiconductor fabrication. These have zero current leakage and low power consumption and acts like an ideal switch which can be used instead of traditional semiconductor logics. Due to zero off state leakage NEM Relays give us a scope for low power design. To increase the cell stability than that of CMOS 6T SRAM cell, it utilizes the properties of NEM relays that is infinite subthreshold slope and hysteresis. In this paper we use Schmitt trigger multi threshold CMOS instead of conventional CMOS 6T SRAM cell in order to increase the noise so that the signal to noise ratio decreases.","PeriodicalId":220180,"journal":{"name":"2018 International Conference on Power, Energy, Control and Transmission Systems (ICPECTS)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129673510","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Optimal Allocation of Distribution Generation Units in Radial Distribution Systems Using Nature Inspired Optimization Techniques 基于自然启发优化技术的径向配电系统中配电发电机组的优化配置
Y. Kumar, N. Kumar
{"title":"Optimal Allocation of Distribution Generation Units in Radial Distribution Systems Using Nature Inspired Optimization Techniques","authors":"Y. Kumar, N. Kumar","doi":"10.1109/ICPECTS.2018.8521630","DOIUrl":"https://doi.org/10.1109/ICPECTS.2018.8521630","url":null,"abstract":"Growth in energy demand is more than the energy production due to various reasons like industrial growth, rapid urbanization, increasing affordability of electric gadgets etc. The integration of existing grids with renewable energy sources provides economical, sustainable and efficient power distribution, and this allows the control of the greenhouse effect. The reduction in power loss and voltage profile improvement in distribution system can be done using some techniques such as feeder or network reconfiguration, VAR compensation with capacitor banks and distributed generation (DG). DG is localized small scale generation installed in the distribution network capable of injecting active power and providing limited reactive power support, reduced distribution losses, improved voltage profile in the system and hence the quality of the power is improved. The significant process to improve the power quality of the system is finding the size of the DG unit and their suitable locations in the system. In this paper, IPSO and a new gradient free, metaheuristic, population based algorithm called Bat Inspired Algorithm is described to evaluate the optimal size and location of DG units. Distributed load flow is carried out for 33-bus and 69-bus systems to obtain power losses and voltage at each bus. Optimization techniques IPSO and BAT algorithms are considered for the optimal placement and optimal sizing of distributed generators in radial distribution system by multi-objective optimization approach has been discussed. The practical application and efficiency of this method is evaluated using two various test systems (33 and 69-bus). The proposed methods are carried out using MATLAB.","PeriodicalId":220180,"journal":{"name":"2018 International Conference on Power, Energy, Control and Transmission Systems (ICPECTS)","volume":"17 5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134209500","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 10
Design of Ultra-Lift Luo Converter for Pumping Applications 泵用超扬程罗变换器的设计
Emelda. V Beulin, J. Pradeep
{"title":"Design of Ultra-Lift Luo Converter for Pumping Applications","authors":"Emelda. V Beulin, J. Pradeep","doi":"10.1109/ICPECTS.2018.8521602","DOIUrl":"https://doi.org/10.1109/ICPECTS.2018.8521602","url":null,"abstract":"This paper proposes a novel approach to Ultra-Lift LUO converter which is suitable for pumping applications. In now a days, utilizing of the dc-dc converters are increased because of the vast applications like locomotives, mobile charging and for utilizing the power generated from Solar and wind power plants. The voltage-lift (VL) technique was successfully applied in the design of DC-DC converters. Using the Voltage-lift technique the converter can obtain high-voltage transfer gain. The super-lift technique has been given much attention since it yields highvoltage transfer gain. The Ultra-lift (UL) LUO-converter is introduced as a novel approach to the new technology, ultra-lift technique, produces higher voltage transfer gain. Analysis and calculation of the UL-LUO converter illustrates the advanced characteristics of the converter. It projects the proposed Ultra-Lift LUO converter circuit which shows better results of high voltage transfer gain. The proposed circuit is simulated and validated with the theoretical results.","PeriodicalId":220180,"journal":{"name":"2018 International Conference on Power, Energy, Control and Transmission Systems (ICPECTS)","volume":"31 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133610129","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 6
Smart Energy Meter Surveillance Using IoT 使用物联网的智能电表监控
M. Prathik, K. Anitha, V. Anitha
{"title":"Smart Energy Meter Surveillance Using IoT","authors":"M. Prathik, K. Anitha, V. Anitha","doi":"10.1109/ICPECTS.2018.8521650","DOIUrl":"https://doi.org/10.1109/ICPECTS.2018.8521650","url":null,"abstract":"Electricity plays a cardinal role in day to day life. The electrical energy consumption in India is the third biggest after China and USA with 5.5% global share in 2016. The per person energy use rate in India is closer to 0.7 KW. India's share with global energy demand will rise to 9% by 2035. Internet of Things (IoT) is an emerging field and IoT based devices have created a revolution in electronics and IT. The foremost objective of this project is to create awareness about energy consumption and efficient use of home appliances for energy savings. Due to manual work, our existing electricity billing system has major drawbacks. This system gives the information on meter reading, power cut and the alert systems for producing an alarm when energy consumption exceeds beyond the specified limit using IoT. This idea is being implemented to reduce the human dependency to collect the monthly reading and minimize the technical problems regarding billing process. This project extends the design and implementation of an energy monitoring system with the pre-intimation of power agenda using Arduino micro controller and a GSM (Global System for Mobile Communication) module. The advantage of this system is that a user can understand the power consumed by the electrical appliances on the daily basis and can take further steps to control them and thus help in energy conservation. From the electricity board section, the information regarding the bill amount, payment and the pre-planned power shut down details are communicated to the consumer. If the customer does not pay the bill in time, the user is informed through a message. If still the customer does not pay the bill, then as per designated consideration, one alert message will be sent then automatically power connection is disconnected from the remote server. In the already existing smart energy meter, it shows the energy consumed by the appliances from the date of installation of the energy meter and its corresponding rupees. In this proposed energy meter, the meter gives the energy consumed on daily basis, its corresponding rupees, billing details and payment using IoT. Additionally, it has the main objective of giving the preintimation of power schedule and an alert system for producing an alarm when the energy consumption exceeds beyond the certain limit. It also has the facility of terminating the power supply when the residents are out of station to minimize the wastage of energy. This system not only reduces the power cut issues and the labor cost for noticing the residential energy consumption in regular intervals but also increases the energy conservation with the help of alarm systems and the energy meter accuracy by reducing the billing error and the cost of maintenance.","PeriodicalId":220180,"journal":{"name":"2018 International Conference on Power, Energy, Control and Transmission Systems (ICPECTS)","volume":"14 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115014895","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 35
Accurate Fault Location Estimation of High Voltage Transmission Line Using Disturbance Record 基于扰动记录的高压输电线路故障精确定位方法
Ayyaj S Maner, S. Lavand
{"title":"Accurate Fault Location Estimation of High Voltage Transmission Line Using Disturbance Record","authors":"Ayyaj S Maner, S. Lavand","doi":"10.1109/ICPECTS.2018.8521637","DOIUrl":"https://doi.org/10.1109/ICPECTS.2018.8521637","url":null,"abstract":"This paper provides a fault location technique for overhead transmission line when disturbance fault recorded data is accessible from both terminal. Numerical relay estimates the fault location based on one end data without compensating the effect of fault resistance; also it does not consider the contribution of remote source, which introduces error in fault location estimation for ground fault. Inaccurate result increases fault finding time, operating cost, revenue loss and affect the Reliability and Availability Index of Transmission system. This error can be reduced using two end data. This paper presents a technique developed to determine the fault location using pure fault voltages, currents obtained from disturbance recorder with two terminal unsynchronized data. Different fault cases are considered from the event recorder of a private transmission network and presented. The fault location is estimated based on positive sequence network using the three-phase current and voltage phasors. Results are compared with the actual fault distance spotted during post fault patrolling. The accuracy of fault location using one end and two terminal data are also compared. Two terminal algorithm is more accurate compared to one terminal algorithm because it is not affected by fault resistance and reactance.","PeriodicalId":220180,"journal":{"name":"2018 International Conference on Power, Energy, Control and Transmission Systems (ICPECTS)","volume":"421 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116687222","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
Energy Saving and Smart Billing System for Household Consumers Connected to a Smart Grid in Tamil Nadu Power System 泰米尔纳德邦电力系统智能电网家庭用户节能和智能计费系统
V. Vijeesh, B. Ponkarthika, E. Kaliappan, M. Surendar, M. Vignesh
{"title":"Energy Saving and Smart Billing System for Household Consumers Connected to a Smart Grid in Tamil Nadu Power System","authors":"V. Vijeesh, B. Ponkarthika, E. Kaliappan, M. Surendar, M. Vignesh","doi":"10.1109/ICPECTS.2018.8521613","DOIUrl":"https://doi.org/10.1109/ICPECTS.2018.8521613","url":null,"abstract":"this paper discusses the idea of offering electricity to the consumers based on time differenced tariffs. This reduces the consumption of power at peak time and increases the demand responsiveness. This scheme encourages the active involvement of consumers in the consumption of power during peak hours. The Methodology of this work is to offer electricity based on load and time of power consumption. Smart metering techniques with the real time pricing scheme make the process simpler and cost effective. Smart meters are used to measure the accurate consumption of power throughout the day in real time and facilitate the real time monitoring and load sharing features in the real time pricing scheme.","PeriodicalId":220180,"journal":{"name":"2018 International Conference on Power, Energy, Control and Transmission Systems (ICPECTS)","volume":"85 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132044305","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
A Review on Energy Minimization Techniques in WSN 无线传感器网络中能量最小化技术综述
P. Kalaichelvi, T. Sheela, S. Eniyan, G. Sreeram
{"title":"A Review on Energy Minimization Techniques in WSN","authors":"P. Kalaichelvi, T. Sheela, S. Eniyan, G. Sreeram","doi":"10.1109/ICPECTS.2018.8521638","DOIUrl":"https://doi.org/10.1109/ICPECTS.2018.8521638","url":null,"abstract":"Lifetime maximization has been one of the most discussed topic in wireless sensor networks as any attempt to increase the life time is very significant for the continuity in the network operation. The present paper aims to review some of the research works done in lifetime maximization through energy minimization techniques. Finally, a comparison of various techniques is presented.","PeriodicalId":220180,"journal":{"name":"2018 International Conference on Power, Energy, Control and Transmission Systems (ICPECTS)","volume":"151 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132215776","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Automated Traffic Clogging Elusion in Roadways 自动道路交通堵塞躲避
D. Rohini, V. Devakumar, A. R
{"title":"Automated Traffic Clogging Elusion in Roadways","authors":"D. Rohini, V. Devakumar, A. R","doi":"10.1109/icpects.2018.8521628","DOIUrl":"https://doi.org/10.1109/icpects.2018.8521628","url":null,"abstract":"Traffic control system in roadways forms the important criteria in day-to-day life. However the Automated traffic control system forms better platform to eradicate traffic jams and congestion in roadways. The major disadvantage of the existing system isthat the people are not following the traffic rules. So this proposed system came in existence with some restrictions to follow the traffic rules. In this model the mechanical barrier is fixed at the junction and worked using microcontroller and timer. The mechanical barrier works with the help of servomotor. During emergency situation the RFID tag in the ambulance transmit the data to the RFID reader and feeds information to the microcontroller through zigbee. This can make better congestion free environment.","PeriodicalId":220180,"journal":{"name":"2018 International Conference on Power, Energy, Control and Transmission Systems (ICPECTS)","volume":"59 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134252231","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Power Loss Minimization in a Radial Distribution System with Distributed Generation 带分布式发电的径向配电系统的功率损耗最小化
A. Alam, Abhishek Gupta, Parth Bindal, A. Siddiqui, Mohammad Zaid
{"title":"Power Loss Minimization in a Radial Distribution System with Distributed Generation","authors":"A. Alam, Abhishek Gupta, Parth Bindal, A. Siddiqui, Mohammad Zaid","doi":"10.1109/ICPECTS.2018.8521619","DOIUrl":"https://doi.org/10.1109/ICPECTS.2018.8521619","url":null,"abstract":"Integration of distributed generation (DG) in a distribution network is a key for power loss mitigation and improvement in the voltage profile. In this paper, a mixed-integer nonlinear programming (MINLP) based optimization technique has been used to determine the optimal sizes and corresponding locations of DGs to be placed in a distribution network for reduction of power loss and improvement in the voltage profile. The MINLP technique considered in this paper, utilizes the sequential quadratic programming (SQP) through ‘fmincon’ function available in the MATLAB optimization toolbox. The MINLP technique has been applied for solving the problem of optimal DG placement in IEEE 33-Bus and 69-Bus distribution systems. For the purpose of load flow, a well-known direct load flow technique has been used. After the analysis of the results obtained for the two test systems, it can be concluded that MINLP is an effective approach for minimizing the distribution network losses and improving the system voltage profile by optimally placing the DGs of suitable sizes at appropriate locations.","PeriodicalId":220180,"journal":{"name":"2018 International Conference on Power, Energy, Control and Transmission Systems (ICPECTS)","volume":"201 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121845106","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 13
Solar Powered Automatic Irrigation System 太阳能自动灌溉系统
C. R. B. Durai, B. Vipulan, T. Khan, T. Prakash
{"title":"Solar Powered Automatic Irrigation System","authors":"C. R. B. Durai, B. Vipulan, T. Khan, T. Prakash","doi":"10.1109/ICPECTS.2018.8521604","DOIUrl":"https://doi.org/10.1109/ICPECTS.2018.8521604","url":null,"abstract":"In recent days, people working in agricultural fields are facing lot of problems in cultivating their crops. The solution for such a problem is provided by the solar powered irrigation system. Here with the help of solar panel, submersible pumps, PV cells are used in producing energy. In this system, the moisture sensor and the pH level sensor are powered wirelessly. The sensed data values are transferred to the user mobile via GSM communication method. The aim of this paper is to help the farmers to use water effectively and use solar energy for irrigation purpose.","PeriodicalId":220180,"journal":{"name":"2018 International Conference on Power, Energy, Control and Transmission Systems (ICPECTS)","volume":"92 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131631064","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 9
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书