Jurnal Neutrino最新文献

筛选
英文 中文
PHASE ANALYSIS AND PHYSICAL PROPERTIES OF B2O3-ADDED ZIRCON CERAMICS SINTERED AT 1300 °C 1300℃烧结b2o3锆英陶瓷的物相分析及物理性能
Jurnal Neutrino Pub Date : 2021-12-20 DOI: 10.18860/neu.v14i1.12663
Fikriyatul Azizah Su'ud, S. Pratapa, M. Musyarofah
{"title":"PHASE ANALYSIS AND PHYSICAL PROPERTIES OF B2O3-ADDED ZIRCON CERAMICS SINTERED AT 1300 °C","authors":"Fikriyatul Azizah Su'ud, S. Pratapa, M. Musyarofah","doi":"10.18860/neu.v14i1.12663","DOIUrl":"https://doi.org/10.18860/neu.v14i1.12663","url":null,"abstract":"This study was aimed to know the effect of B2O3(boria) addition on the phase composition and physical properties of zircon ceramics.The raw zircon powder used in the study was a purified natural zircon sand from Kereng Pangi, Central Kalimantan, Indonesia. The zircon ceramics were prepared by a solid state reaction method with variation of B2O3 addition of 3 wt%, 6 wt% and 9 wt% and sintered at 1300 °C for 5h. The phase composition, density and microstructure were characterized using X-ray diffraction (XRD), densimeter and Scanning Electron Microscope (SEM), respectively. Vickers Hardness measurement was perfomed at the polished surface of the ceramics. Results showed that all samples contained pure zircon phase, i.e. there was no effect of B2O3 addition on the phase composition. In general, the density and hardness increased with increasing B2O3 addition, but addition up to 9 wt% is not optimum to achieve ultra-dense zircon ceramics. Furthermore, the SEM image also showed no significant difference in average grain size. The crystallite size has grown nearly eight times (325 nm) of its original powder. The Vickers hardness of the ceramics is not significantly influenced by the addition of boria. It appears that the boria failure to increase densification also results in the extent of contact between grains which then produces relatively large zircon grains.","PeriodicalId":17685,"journal":{"name":"Jurnal Neutrino","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81469129","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
CHARACTERIZATION OF CLAY MATERIALS USED FOR POTTERY PURPOSES FROM RENDENG, MALO, BOJONEGORO 仁登、马洛、波永尼哥罗制陶用粘土材料的表征
Jurnal Neutrino Pub Date : 2021-12-20 DOI: 10.18860/neu.v14i1.12753
Dyah Setyaningrum, Sujiat Sujiat, Aprilia Nur Azizah
{"title":"CHARACTERIZATION OF CLAY MATERIALS USED FOR POTTERY PURPOSES FROM RENDENG, MALO, BOJONEGORO","authors":"Dyah Setyaningrum, Sujiat Sujiat, Aprilia Nur Azizah","doi":"10.18860/neu.v14i1.12753","DOIUrl":"https://doi.org/10.18860/neu.v14i1.12753","url":null,"abstract":"Clay material from Rendeng, Malo, Bojonegoro was studied by mineralogy and physicochemical characterization to evaluate its potential suitability as a raw material in pottery application. X-ray Diffraction (XRD) and Fourier Transform-Infrared (FTIR) spectrometry were used to establish the mineralogy composition. Meanwhile the physical properties were identified by particle size distribution and consistency limits. Chemical composition was carried out by X-ray Fluorescence Spectrometer (XRF).  The results of XRD characterization revealed that clay from Rendeng Village, Malo, Bojonegoro contained  kaolin, quartz, and feldspar. Physical characterization shows that clay material is a less plastic type based on Atterberg method. Based on the chemical compositions indicated that SiO2, Al2O3, CaO, and Fe2O3 were abundance oxides. Therefore, clay from Desa Rendeng was only suitable for the pottery purposes because most of its mineral compositions did not meet the quality requirements for making advanced ceramics.","PeriodicalId":17685,"journal":{"name":"Jurnal Neutrino","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90309402","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
COMPARISON OF EFFICIENCY AND CARBON EMISSIONS OF FILAMENT ELECTRIC STOVES AND INDUCTION ELECTRIC STOVES 长丝电炉与感应电炉效率及碳排放比较
Jurnal Neutrino Pub Date : 2021-12-20 DOI: 10.18860/neu.v14i1.13008
Y. Tiandho, F. Afriani
{"title":"COMPARISON OF EFFICIENCY AND CARBON EMISSIONS OF FILAMENT ELECTRIC STOVES AND INDUCTION ELECTRIC STOVES","authors":"Y. Tiandho, F. Afriani","doi":"10.18860/neu.v14i1.13008","DOIUrl":"https://doi.org/10.18860/neu.v14i1.13008","url":null,"abstract":"Issues related to energy sustainability and carbon emission reduction are continuously being concerned by the Government of the Republic of Indonesia. Various efforts and programs have been launched to achieve targets of the related issues. As known that energy use for cooking by the household is continuously increasing in relation to population growth that will of course increase in energy need which relates to the sustainability of presence energy and carbon emission. Accordingly, the LPG stove conversion program to an electric stove was introduced in order to achieve the target to solve such issues. This paper compared of efficiency and carbon emissions of both electric filament stoves and induction stoves. The result indicated that the induction stove has better efficiency compared with the electric stove. The study also was proved that the carbon emissions for both types of stoves were relatively low in comparison with LPG stoves. However, the enormous operational power of the induction stove is still a challenge that must be resolved to achieve the target of energy sustainability in Indonesia.","PeriodicalId":17685,"journal":{"name":"Jurnal Neutrino","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85772608","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
SOC (STATE of CHARGE) THREE-CELL LEAD DYNAMIC BATTERY MODEL SOC(充电状态)三芯铅动态电池模型
Jurnal Neutrino Pub Date : 2021-06-16 DOI: 10.18860/NEU.V13I2.11835
K. B. Pranata, Freygion Ogiek Rizal Sukma, M. Ghufron, Masruroh Masruroh
{"title":"SOC (STATE of CHARGE) THREE-CELL LEAD DYNAMIC BATTERY MODEL","authors":"K. B. Pranata, Freygion Ogiek Rizal Sukma, M. Ghufron, Masruroh Masruroh","doi":"10.18860/NEU.V13I2.11835","DOIUrl":"https://doi.org/10.18860/NEU.V13I2.11835","url":null,"abstract":"Three-cells dynamic lead-acid battery has been widely manufactured as the latest secondary battery technology. It is being carried out by 10 cycles of charge-discharge treatment with a various types of SoC, such as 100% (Full charge 5100 mAh), 50% (2550 mAh), 25% (1275 mAh) and discharge current of 0.8A. This experiment aims to analyze the treatment of SOC conditions on the performance of the lead-acid battery. The cyclicality test has performed using a Battery Management System (BMS) by applying an electric current at charging 1 A and discharging 0.8A. The results of the SOC charging conditions at 100%, 50%, 25% respectively gave a difference in the value of voltage efficiency of 84%, 87%, 88%, capacity efficiency values of 84%, 80%, 69%, energy efficiency values of 70%, 70%, 62%. The 100% and 50% SOC treatments showed better performance and battery energy the 25% SOC treatment. This research can be a recommendation to predict the performance of the lead-acid battery model during the charging and discharging process.","PeriodicalId":17685,"journal":{"name":"Jurnal Neutrino","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-06-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74027163","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
THE USE OF (Mg0.9Zn0.1)TiO3+2wt.% Bi2O3 CERAMICS AS A DIELECTRIC RESONATOR OSCILLATOR MATERIAL AND CHARACTERISATION OF STRUCTURE, MICROSTRUCTURE, AND DENSITY (Mg0.9Zn0.1)TiO3+2wt的使用。作为介电谐振振荡器材料的Bi2O3陶瓷及其结构、微观结构和密度的表征
Jurnal Neutrino Pub Date : 2021-06-16 DOI: 10.18860/NEU.V13I2.11720
Afandy Kadarosman, F. U. Ermawati
{"title":"THE USE OF (Mg0.9Zn0.1)TiO3+2wt.% Bi2O3 CERAMICS AS A DIELECTRIC RESONATOR OSCILLATOR MATERIAL AND CHARACTERISATION OF STRUCTURE, MICROSTRUCTURE, AND DENSITY","authors":"Afandy Kadarosman, F. U. Ermawati","doi":"10.18860/NEU.V13I2.11720","DOIUrl":"https://doi.org/10.18860/NEU.V13I2.11720","url":null,"abstract":"Magnesium titanate (MgTiO3)-based ceramics have the potential for use in the telecommunications industry at microwave frequencies, including as a resonator in dielectric resonator oscillator (DRO) circuit. This research is intended to study the application of (Mg0.9Z0.1)TiO3+2wt.% Bi2O3 (abbreviated MZT01-2) ceramics as DRO material and characterize the structure, microstructure, and bulk density. Fabrication was carried out by ball milling between (Mg0.9Z0.1)TiO3 crystalline powder and 2wt.% Bi2O3 powder. The milled powder was compacted at certain pressure using a die press to become pellets. All pellets were sintered at 1000, 1100, 1200C for 4 h to obtain ceramics. The structural characterization using XRD showed that the three ceramics contained the main MgTiO3 phase, each 93.63, 93.83, and 90.78% molar, the rest was the MgTi2O5 phase. The increase in sinter temperature causes the lattice parameter and the unit cell volume to decrease. The Archimedes bulk density was 2.928; 2.832 and 2.736 g/cm. The microstructure is solid surfaces with a grain diameter of 1.9-2.3 μm accompanied by pores. As DRO materials, the three ceramics exhibited a resonant frequency at 5.11, 5.08, and 5.12 GHz which shows that the ceramics can be applied as DRO materials at microwave frequencies. The sinter temperature variation tends not to affect the resonant frequency position.","PeriodicalId":17685,"journal":{"name":"Jurnal Neutrino","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-06-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85426914","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 3
THE EFFECT OF PH AND CALCINATION TEMPERATURE ON THE ZrO2 PHASE FORMATION FROM NATURAL ZIRCON SAND OF KERENG PANGI 研究了PH和煅烧温度对克楞攀基天然锆石砂形成ZrO2相的影响
Jurnal Neutrino Pub Date : 2021-06-16 DOI: 10.18860/NEU.V13I2.10507
Mohammad Abdullah, T. Triwikantoro, Chairatul Umamah, H. Andi
{"title":"THE EFFECT OF PH AND CALCINATION TEMPERATURE ON THE ZrO2 PHASE FORMATION FROM NATURAL ZIRCON SAND OF KERENG PANGI","authors":"Mohammad Abdullah, T. Triwikantoro, Chairatul Umamah, H. Andi","doi":"10.18860/NEU.V13I2.10507","DOIUrl":"https://doi.org/10.18860/NEU.V13I2.10507","url":null,"abstract":"In this research ZrO 2 has been synthesized from Kereng Pangi zircon sand in Central Kalimantan through alkali fusion-coprecipitation method. Firstly, zircon sand (ZrSiO 4 ) was purified to reduce impurities by magnetic separation, cleaned using an ultrasonic cleaner, soaked/leached with HCl 2 M for 12 hours and leached with HCl at 60 oC for 3 hours. Secondly, alkali fusion was done with KOH as an alkali. This product was then washed by water and dried before leached with HCl 30% at 90 oC for 30 minutes to precipitate and seperate Silica from Zircon. ZrO 2 filtrate (ZrOCl 2 ) precipitated with NH 4 OH at pH 4, pH 7, and pH 10 forms Zr(OH) 4 gel. Zr(OH) 4 gel was dried and characterized by DTA-TGA, which was then followed by calcination based on DTA TGA results at temperature ranges of 550 oC - 700 oC to produce ZrO 2 . XRD results show that single tetragonal phase of ZrO 2 is formed in all variations of pH precipitation and calcination temperature. An analysis using MAUD software show that crystal size reduces as the increase in precipitation of pH. The crystal size results are 110 nm, 66 nm and 48 nm at pH 4, pH 7 dan pH 10 at 700 oC, respectively. Moreover, XRF results show that ZrO 2  with purity is at around 95.8 % at pH 4 and 96.3 % at pH 7 and pH 10.","PeriodicalId":17685,"journal":{"name":"Jurnal Neutrino","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-06-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"78887972","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Back Matter 回到问题
Jurnal Neutrino Pub Date : 2021-06-16 DOI: 10.18860/neu.v13i2.12585
Kusairi S.Si
{"title":"Back Matter","authors":"Kusairi S.Si","doi":"10.18860/neu.v13i2.12585","DOIUrl":"https://doi.org/10.18860/neu.v13i2.12585","url":null,"abstract":"","PeriodicalId":17685,"journal":{"name":"Jurnal Neutrino","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-06-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81807822","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
DESIGN AND BUILD OF AUTOMATIC WASTAFEL USING ULTRASOUND HC-SR04 SENSOR BASED ON ARDUINO 基于arduino的超声波hc-sr04传感器自动废物处理系统的设计与构建
Jurnal Neutrino Pub Date : 2021-06-16 DOI: 10.18860/NEU.V13I2.11664
Henry Prasetyo, Mohammad Rofi’i, Septiana Kurniasari, Muhammad Wisnu Pamungkas
{"title":"DESIGN AND BUILD OF AUTOMATIC WASTAFEL USING ULTRASOUND HC-SR04 SENSOR BASED ON ARDUINO","authors":"Henry Prasetyo, Mohammad Rofi’i, Septiana Kurniasari, Muhammad Wisnu Pamungkas","doi":"10.18860/NEU.V13I2.11664","DOIUrl":"https://doi.org/10.18860/NEU.V13I2.11664","url":null,"abstract":"The lack of public concern for washing hands during the Covid-19 pandemic, the authors designed an automatic sink using an arduino-based HC-SR04 ultrasound sensor to attract the public's interest. By making automatic sink technology using the HC-SR04 ultrasound sensor based on Arduino for use in hand washing by the community. This study uses experimental research that examines the effect of automatic washbasin with people's behavior in washing hands. By testing the use of water in 20 seconds, 43 people can use it in one day, and soap can be used by 6 people in one day in 5 seconds. The automatic sink using the HC-SR04 ultrasound sensor based arduino can be used with a distance that is made less than 15cm designed to be practical and sterile because it is used that does not touch faucets or soap. The conclusion of the study is that if there is an object that approaches the ultrasound sensor within a distance of less than 15cm, the water pump will be active for 20 seconds or the soap pump for 5 seconds will automatically come out. And it will run out if used for 934 seconds in 1 liter gallon or 46 people a day and the use of soap for 5 seconds will run out approximately 6 people in one day.","PeriodicalId":17685,"journal":{"name":"Jurnal Neutrino","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-06-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"87928765","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
CROSS SECTION OF ELECTRON ANTINEUTRINO INTERACTION WITH 40AR AND 84KR AND ITS RELEVANCE TO GEONEUTRINO DETECTION 电子反中微子与40ar和84kr相互作用的截面及其与地球中微子探测的相关性
Jurnal Neutrino Pub Date : 2021-02-02 DOI: 10.18860/NEU.V13I1.10602
Akmal Ferdiyan, U. N. Prabowo
{"title":"CROSS SECTION OF ELECTRON ANTINEUTRINO INTERACTION WITH 40AR AND 84KR AND ITS RELEVANCE TO GEONEUTRINO DETECTION","authors":"Akmal Ferdiyan, U. N. Prabowo","doi":"10.18860/NEU.V13I1.10602","DOIUrl":"https://doi.org/10.18860/NEU.V13I1.10602","url":null,"abstract":"Neutrino can carry information from places that cannot be reached by the usual detection mechanism because it has a very weak interaction with matter. This can be utilized to study the heat flow process inside the earth by using information carried by geoneutrino (electron antineutrino). In this sense, it is important to know the characteristics of neutrino interaction with materials. In this study, the cross-section calculation of the electron antineutrino interaction with Ar-40 and Kr-84 was carried out using computational methods with the help of GENIE software. In the energy range of 0-10 MeV, the dominant interaction between the two materials is the interaction of QES NC and MEC types with an energy threshold of 5,09 MeV. Both Ar-40 and Kr-84 cannot be used as a scintillator material for geoneutrino detection because in the energy range 0-4,4 MeV the cross-sectional value of the CC interaction  is 0.","PeriodicalId":17685,"journal":{"name":"Jurnal Neutrino","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-02-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"87070608","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
A SIMPLE SYNTHESIS OF NICKEL OXIDE NANOTUBE USING HIGH VOLTAGE ELECTROLYSIS 高压电解法合成氧化镍纳米管
Jurnal Neutrino Pub Date : 2021-02-02 DOI: 10.18860/NEU.V13I1.10224
Y. Pramana, B. Setiawan, Prihono Prihono, Yitno Utomo, M. Subandowo, K. Budipramana
{"title":"A SIMPLE SYNTHESIS OF NICKEL OXIDE NANOTUBE USING HIGH VOLTAGE ELECTROLYSIS","authors":"Y. Pramana, B. Setiawan, Prihono Prihono, Yitno Utomo, M. Subandowo, K. Budipramana","doi":"10.18860/NEU.V13I1.10224","DOIUrl":"https://doi.org/10.18860/NEU.V13I1.10224","url":null,"abstract":"Recently, the development of nanoparticle nickel oxide has increased due to their potential application such as biosensors, catalysts, solar cells, supercapacitors, and batteries. In this work, the addition of CTAB for nickel oxide nanoparticle synthesis using electrolysis was investigated.  The nickel plates were used as anode and cathode in the electrolysis process. The process was operated at a constant voltage of 60 V for 30 minutes. The XRD result showed conformity with the Nickel oxide diffraction pattern. Meanwhile, the impurity from nickel hydroxide peaks still appeared. From FTIR characterization also indicates the band of Ni-O stretching vibration. The morphology characterization of nickel oxide using Scanning Electron Microscopy (SEM) showed the nanotube structure, while Transmission Electron Microscopy showed the nanoparticle size from 250.44 to 325.60 nm in length. On the other hand, the transformation of Ni(OH) 2 to NiO has been shown using TGA characterization.","PeriodicalId":17685,"journal":{"name":"Jurnal Neutrino","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-02-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"75225283","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信