Iranian Journal of Chemistry & Chemical Engineering-international English Edition最新文献_第5页

Numerical study of natural convection of nanofluids in an inclined flat bottom flask using finite-volume approach. 斜平底烧瓶内纳米流体自然对流的有限体积法数值研究。

IF 1.8 4区工程技术

Iranian Journal of Chemistry & Chemical Engineering-international English Edition Pub Date : 2021-09-06 DOI: 10.30492/IJCCE.2021.527841.4668

N. Chafai, Hicham Salhi, Khalissa Benbouguerra, S. Chafaa

{"title":"Numerical study of natural convection of nanofluids in an inclined flat bottom flask using finite-volume approach.","authors":"N. Chafai, Hicham Salhi, Khalissa Benbouguerra, S. Chafaa","doi":"10.30492/IJCCE.2021.527841.4668","DOIUrl":"https://doi.org/10.30492/IJCCE.2021.527841.4668","url":null,"abstract":"In this work, we study numerically the natural convection of nanofluids (NF) in an inclined flat bottom flask; it is one of laboratory flasks used in organic chemistry synthesis. The main reason of this study is to enhance the thermal properties of the reaction medium inside the flat bottom flask and to ameliorate the rate of chemical reactions using nanofluids. The flat bottom wall is maintained at a constant high temperature Th. While the top, left and right walls of the cavity are maintained at a low temperature TL. The NF comprises Cu and Al2O3 nanoparticles (NP) suspended in pure water. The governing equations are solved numerically using the finite-volume approach and formulated using the Boussinesq approximation. In this simulation we examined the effects of the NP volume fraction (φ) from 0% to 5%, the Rayleigh number from 103 to 106, the various inclination angles of enclosure (γ=0°,5°,10°, 15°) and the NF type (Cu and Al2O3) on the flow streamlines, isotherm distribution and Nusselt number. The obtained results show that the addition of Cu and Al2O3 NP increases the mean Nusselt number which enhances the heat transfer in the flat bottom flask and causes significant changes in the flow pattern. In addition, the mean Nusselt number is increase with increasing the Rayleigh number and the volume fraction and the best results have obtained from the Cu nanofluide. Also, as the inclination angle increases the mean Nusselt number decreases and the highest value of Nusselt number was obtained for a vertical enclosure (γ=0°). The obtained streamlines are mostly symmetric and their values are generally increase by increasing the Rayleigh number and volume fractions of NPs. Besides, the obtained isotherms are generally follow the geometry of the flat bottom flask.","PeriodicalId":14572,"journal":{"name":"Iranian Journal of Chemistry & Chemical Engineering-international English Edition","volume":"2 1","pages":""},"PeriodicalIF":1.8,"publicationDate":"2021-09-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84886689","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1

Removal of Methyl Orange from aqueous solution using Zeolitic Imidazolate Framework-11: Adsorption Isotherms, Kinetics and Error analysis. 咪唑酸分子筛框架-11对甲基橙的去除:吸附等温线、动力学和误差分析。

IF 1.8 4区工程技术

Iranian Journal of Chemistry & Chemical Engineering-international English Edition Pub Date : 2021-09-01 DOI: 10.30492/IJCCE.2021.131068.4236

Rachid Lamari, B. Benotmane, Farida Mostefa

{"title":"Removal of Methyl Orange from aqueous solution using Zeolitic Imidazolate Framework-11: Adsorption Isotherms, Kinetics and Error analysis.","authors":"Rachid Lamari, B. Benotmane, Farida Mostefa","doi":"10.30492/IJCCE.2021.131068.4236","DOIUrl":"https://doi.org/10.30492/IJCCE.2021.131068.4236","url":null,"abstract":"Dyes, which are increasingly harmful to human health and ecology, are an environmental concern and their removal from wastewater is extremely required. It is also important for researchers to find relevant techniques to process these types of pollutants. This study examines the use of the synthesized imidazolate zeolite frameworks-11 (ZIF-11) by stirring method for the methyl orange (MO) dye removal from aqueous solution. The scanning electron microscopy, thermogravimetry, X-ray diffraction, and Fourier transform infrared spectroscopy, were used for the analysis of ZIF-11 particles, which exhibited highly porous, irregular and heterogeneous shapes and variable size. The MO removal was assessed by batch adsorption with ZIF-11 particles as adsorbent, whose efficiency was achieved at pH=8, stirring speed of 600 rpm, for a contact time of 40min and a dosage of 800mg/L of MO solution. The thermodynamic and kinetic analysis of the MO adsorption process was achieved successfully with the pseudo-second order kinetic model as well as Langmuir and Temkin isotherms, indicating the feasibility and spontaneity of the uniform distribution of MO molecules on the active sites of ZIF-11 particles. The calculated maximum adsorption capacity of MO on ZIF-11 particles was 178.57 mg/g, which is indicative of the potential adsorptive properties of the synthesised ZIF-11 for MO dyes.","PeriodicalId":14572,"journal":{"name":"Iranian Journal of Chemistry & Chemical Engineering-international English Edition","volume":"19 1","pages":""},"PeriodicalIF":1.8,"publicationDate":"2021-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86046883","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1

Numerical study on bilateral stagger Cantor fractal baffles micromixer 双边交错康托分形挡板微混合器的数值研究

IF 1.8 4区工程技术

Iranian Journal of Chemistry & Chemical Engineering-international English Edition Pub Date : 2021-09-01 DOI: 10.30492/IJCCE.2021.527558.4664

Xueye Chen, Honglin Lv

{"title":"Numerical study on bilateral stagger Cantor fractal baffles micromixer","authors":"Xueye Chen, Honglin Lv","doi":"10.30492/IJCCE.2021.527558.4664","DOIUrl":"https://doi.org/10.30492/IJCCE.2021.527558.4664","url":null,"abstract":"Changing the structure of microchannel or setting obstacles in microchannel has become an effective way to improve the mixing performance of passive micromixer. Here, we design a three-dimensional micromixer with fractal obstacles based on Cantor fractal principle. The effect of fractal obstacle level, micromixer height, spacing between fractal obstacles and different Re (Reynold number) on the mixing efficiency are studied. Some valuable conclusions are obtained. The micromixer with quadratic fractal obstacles has better mixing efficiency than the micromixer with primary fractal obstacles. With the increase of the micromixer height, the effective folding area of the fluid can be increased. When the spacing between the fractal barriers is 0µm, the mixing efficiency of the micromixer is better. The mixing efficiency of all micromixers can reach more than 90% at Re is less 0.1 or more than 40. When Re is 70 and 100, the fluid convection in the micromixer is very strong. Finally, a best micromixer CSM600(Cantor structure micromixer with height 600µm) is obtained. The mixing effect is superior to other micromixers under any conditions.","PeriodicalId":14572,"journal":{"name":"Iranian Journal of Chemistry & Chemical Engineering-international English Edition","volume":"35 6 1","pages":""},"PeriodicalIF":1.8,"publicationDate":"2021-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80090260","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1

Solvent Extraction of Copper Ions from Wastewater using Reverse Micelles: Experimental and Optimization 反胶束萃取废水中铜离子的实验与优化

IF 1.8 4区工程技术

Iranian Journal of Chemistry & Chemical Engineering-international English Edition Pub Date : 2021-09-01 DOI: 10.30492/IJCCE.2021.521869.4488

S. Upadhyaya, T. Chaturvedi, P. Pandit, M. Vashishtha

{"title":"Solvent Extraction of Copper Ions from Wastewater using Reverse Micelles: Experimental and Optimization","authors":"S. Upadhyaya, T. Chaturvedi, P. Pandit, M. Vashishtha","doi":"10.30492/IJCCE.2021.521869.4488","DOIUrl":"https://doi.org/10.30492/IJCCE.2021.521869.4488","url":null,"abstract":"In this study, the optimum conditions for different process parameters were determined for solvent extraction of copper ions from wastewater using reverse micelles. The process parameters viz. copper ion concentration, sodium bis-2-ethyl hexyl sulphosuccinate (AOT) concentration, solution pH, organic to aqueous phase volume ratio, and NaCl concentration were taken into consideration in response surface methodology, ranging from 30-150 mg/l, 0.04-0.2 [M], 3-11, 0.2-1.0, 0-4 g/100 ml respectively and their effect on percentage removal of copper ions were studied. A regression model was developed by conducting response surface methodology for the analysis of percentage removal of copper ions from wastewater. As many as fifty four experiments were procured from the design of experiments for the percentage removal of copper ions. The developed model was employed to optimize the process parameters being considered to maximize the response. The optimum conditions were found to be 30 mg/l copper ion concentration, 0.20 [M] AOT concentration, 3.12 pH, 0.57 organic to aqueous phase volume ratio, and 0.134 g/100 ml NaCl concentration. The obtained model was validated with experimental data and found to be best fitted within the tolerance limit. The effect of cross-interaction among the process parameters on the percentage removal of copper ions were also investigated. In this study, the copper ion concentration was analyzed by Atomic absorption spectroscopy (AAS).","PeriodicalId":14572,"journal":{"name":"Iranian Journal of Chemistry & Chemical Engineering-international English Edition","volume":"67 1","pages":""},"PeriodicalIF":1.8,"publicationDate":"2021-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80632919","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

IMPROVISATION OF COMBUSTION BEHAVIOUR OF JOJOBA OIL DIESEL BLEND FUELLED DI DIESEL ENGINE BY ENGINE MODIFICATIONS SUCH AS MOP AND TBC 通过mop和TBC等发动机改造改善荷荷巴油柴油混合燃料直燃发动机的燃烧性能

IF 1.8 4区工程技术

Iranian Journal of Chemistry & Chemical Engineering-international English Edition Pub Date : 2021-09-01 DOI: 10.30492/IJCCE.2021.138262.4393

K. DevanP, C. Ramakrishnan, Bibin Chidambaranathan, S. Gopinath

{"title":"IMPROVISATION OF COMBUSTION BEHAVIOUR OF JOJOBA OIL DIESEL BLEND FUELLED DI DIESEL ENGINE BY ENGINE MODIFICATIONS SUCH AS MOP AND TBC","authors":"K. DevanP, C. Ramakrishnan, Bibin Chidambaranathan, S. Gopinath","doi":"10.30492/IJCCE.2021.138262.4393","DOIUrl":"https://doi.org/10.30492/IJCCE.2021.138262.4393","url":null,"abstract":"To reduce the importance of fossil fuels, the identification of biofuels plays a vital role. The plant oil chosen for this study is novel plant oil named Jojoba oil (the botanical name is Simmondsia Chinensis). To utilise this type of oil in higher proportion with diesel, engine modifications were carried. The engine modifications include optimising salient operating parameters with Thermal Barrier Coating (TBC). Taguchi and Gray relational methods were used for finding the optimised values of salient operating parameters like injection pressure, compression ratio, injection timing and intake air temperature as 275 bar, 19.5 CR, 27.5 bTDC and 65˚C, respectively [1]. This has helped to combust the higher blends of jojoba oil, namely 60J, 70J and 80J, without adverse performance and emission characteristics. The fundamental aim of coating Aluminium oxide, Molybdenum and Titanium oxide (40%, 30% and 30%) on the inner surface of the piston crown and the cylinder head is to retain heat and thereby achieve higher thermal efficiency. Combustion, performance and emission analysis were done and found that 60% by volume of jojoba oil can be applied in a TBC engine which offers 11.5% higher BTE, 74.3% lower CO, 31.2% lower HC, 8.6% higher NOx and 25.9% lower smoke than 70% and 80% by volume of jojoba oil.","PeriodicalId":14572,"journal":{"name":"Iranian Journal of Chemistry & Chemical Engineering-international English Edition","volume":"16 1","pages":""},"PeriodicalIF":1.8,"publicationDate":"2021-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83395245","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Preparation and characterization of Enset starch (ES) based films: plasticized by glycerol and sorbitol 甘油和山梨醇增塑Enset淀粉(ES)基薄膜的制备与表征

IF 1.8 4区工程技术

Iranian Journal of Chemistry & Chemical Engineering-international English Edition Pub Date : 2021-09-01 DOI: 10.30492/IJCCE.2021.114496.3761

Abdulkader Mohammed Awol, K. Waghray, P. P.G., R. Math

引用次数: 0

Tuning structural and optical properties of copper oxide nanomaterials by thermal heating and its effect on photocatalytic degradation of Congo Red dye 热加热调整氧化铜纳米材料的结构和光学性质及其对刚果红染料光催化降解的影响

IF 1.8 4区工程技术

Iranian Journal of Chemistry & Chemical Engineering-international English Edition Pub Date : 2021-09-01 DOI: 10.30492/IJCCE.2021.127597.4127

Y. Javed, S. Rehman, N. A. Shad, M. M. Sajid, K. Ali, Y. Jamil, M. Sajjad, A. Nawaz, S. Sharma

{"title":"Tuning structural and optical properties of copper oxide nanomaterials by thermal heating and its effect on photocatalytic degradation of Congo Red dye","authors":"Y. Javed, S. Rehman, N. A. Shad, M. M. Sajid, K. Ali, Y. Jamil, M. Sajjad, A. Nawaz, S. Sharma","doi":"10.30492/IJCCE.2021.127597.4127","DOIUrl":"https://doi.org/10.30492/IJCCE.2021.127597.4127","url":null,"abstract":"In this study, Copper oxide (CuO) nanoparticles (NPs) were prepared using the chemical co-precipitation method and treated at different calcination temperatures. The synthesized CuO NPs have been calcinated at 300 °C, 500 °C, and 700 °C. The X-ray Diffraction (XRD) results exhibited a decrease in the width of the principle diffraction peak with the temperature rise. Crystallite size was determined by Scherrer’s formula, whereas, Williamson-Hall method presented drastic variation in size indicating the creation of lattice strain with the rise in calcination temperature. Scanning Electron Microscopy (SEM) images showed an increase in grain size and vary from 170 nm – 430 nm. X-ray Energy Dispersive Spectroscopy (EDS) results indicate the formation of CuO NPs and relative Cu contents increased (52.9 to 72.5 Atomic percentage) with temperature. Optical properties are also affected by the calcination temperature and a reduction in bandgap is observed with the increase in temperature. Fourier Transform Infra-red spectroscopy (FTIR) spectra of different samples showed identical bonding behavior and no apparent change in bonding was observed. Photo-degradation of Congo Red dye was performed with CuO NPs treated at different temperatures and NPs treated at 500 °C, have shown maximum degradation efficiency in 75 min under visible light.","PeriodicalId":14572,"journal":{"name":"Iranian Journal of Chemistry & Chemical Engineering-international English Edition","volume":"7 1","pages":""},"PeriodicalIF":1.8,"publicationDate":"2021-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"79637339","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1

Response surface modeling of the Removal of Methyl Orange Dye from Aqueous Solution using Magnesium Oxide Nanoparticles Immobilized on Chitosan 壳聚糖固定化氧化镁纳米颗粒去除水溶液中甲基橙染料的响应面模拟

IF 1.8 4区工程技术

Iranian Journal of Chemistry & Chemical Engineering-international English Edition Pub Date : 2021-09-01 DOI: 10.30492/IJCCE.2021.122511.4002

V. Myneni, N. Kanidarapu, F. Shaik, Meena Vangalapati

{"title":"Response surface modeling of the Removal of Methyl Orange Dye from Aqueous Solution using Magnesium Oxide Nanoparticles Immobilized on Chitosan","authors":"V. Myneni, N. Kanidarapu, F. Shaik, Meena Vangalapati","doi":"10.30492/IJCCE.2021.122511.4002","DOIUrl":"https://doi.org/10.30492/IJCCE.2021.122511.4002","url":null,"abstract":"In this work, the chitosan-based magnesium oxide nanoparticles (CS-MgONP) composite was used as an adsorbent for the removal of organic dye methyl orange (MO). The adsorbent characterization was carried out using X-ray diffraction (XRD), Field emission scanning electron scanning microscopy (FE-SEM) and Fourier transform infrared (FTIR) spectroscopy. The faster equilibrium, i.e. at an agitation time of 30 min, indicated the faster adsorption capability of the prepared adsorbent CS-MgONP. The central composite design (CCD) of response surface methodology (RSM) was used to evaluate the impact of process parameters in the range of pH (6-10), CS-MgONP dosage (0.1-0.5g/L), MO concentration (10-30mg/L), and temperature (283-323K) at an optimal agitation period of 30 min. Under optimum conditions of pH=7.93, CS-MgONP dosage=0.4g/L, initial MO concentration=15mg/L and temperature=313 K, 96.42% removal of MO was achieved with a desirability of 0.805. The adsorption of MO onto CS-MgONP was best fitted with the Langmuir adsorption isotherm, with an uptake capacity of 237.5 mg/g and followed the pseudo-second order kinetics. The thermodynamic studies showed positive enthalpy and negative Gibbs free energy that confirmed the spontaneous and endothermic process. Due to the fast equilibrium agitation period, i.e.30 min and high adsorption capacity, the adsorbent CS-MgONP proved to be an excellent choice for dye removal.","PeriodicalId":14572,"journal":{"name":"Iranian Journal of Chemistry & Chemical Engineering-international English Edition","volume":"27 1","pages":""},"PeriodicalIF":1.8,"publicationDate":"2021-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90574324","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 4

An Inclusive and Effective End-of-Life Vehicle Recycling System in India: Balancing Economy and Ecology from Grave to Cradle 印度包容有效的报废汽车回收系统:从坟墓到摇篮平衡经济与生态

IF 1.8 4区工程技术

Iranian Journal of Chemistry & Chemical Engineering-international English Edition Pub Date : 2021-09-01 DOI: 10.30492/IJCCE.2021.135890.4317

A. Murugesan

引用次数: 0

Synthesis of KBiO3/Nano-Ag3PO4 Composite Photocatalyst and its Application for Degradation of Organic Pollutant under visible light KBiO3/纳米ag3po4复合光催化剂的合成及其在可见光下降解有机污染物中的应用

IF 1.8 4区工程技术

Iranian Journal of Chemistry & Chemical Engineering-international English Edition Pub Date : 2021-09-01 DOI: 10.30492/IJCCE.2021.521915.4491

T. Cheng, Chen Chen, Chen-Xi Ye, Weifang Xie, Xiao Zhang, Tian Yuan

{"title":"Synthesis of KBiO3/Nano-Ag3PO4 Composite Photocatalyst and its Application for Degradation of Organic Pollutant under visible light","authors":"T. Cheng, Chen Chen, Chen-Xi Ye, Weifang Xie, Xiao Zhang, Tian Yuan","doi":"10.30492/IJCCE.2021.521915.4491","DOIUrl":"https://doi.org/10.30492/IJCCE.2021.521915.4491","url":null,"abstract":"In this work, a novel composite photocatalyst, KBiO3/nano-Ag3PO4 (K/Ag catalyst), was synthesized, and efficiently degraded methylene blue (MB) under visible light. The various properties of photocatalyst were measured by modern analytical techniques, such as XRD, FT-IR, SEM, XPS, and UV-Vis. We also utilized Density functional theory calculation (DFT) to investigate the photocatalytic degradation mechanism in this reaction process. The multiple characterization findings demonstrated that K/Ag composite catalyst was successfully synthesized using Ag3PO4 and KBiO3, and it displayed excellent absorption for visible light. The photocatalytic results confirmed that K/Ag catalyst greatly promoted the degradation of MB under visible light. The first-order reaction kinetics model could satisfactorily describe the apparent photocatalytic degradation process in this system. In addition, adding electron capture agents to the photocatalytic system highly decreased the degradation efficiencies of target pollutant. Moreover, K/Ag composite catalyst exhibited perfect photocatalyst stability after recycling three times. Through calculating the band structure, Density of States (DOS) and work function, KBiO3 and Ag3PO4 could be considered as n type and p type semiconductor material, respectively. When the composite catalyst was exposed to light, the light-excited electrons would be appeared in both the conduction bands. Furthermore, the transfer trend of electrons and holes made photogenerated electrons concentrate on the conduction band of n type KBiO3, and photogenerated holes concentrate on the valence band of p type Ag3PO4, and thereby greatly improve the photocatalytic efficiency.","PeriodicalId":14572,"journal":{"name":"Iranian Journal of Chemistry & Chemical Engineering-international English Edition","volume":"39 1","pages":""},"PeriodicalIF":1.8,"publicationDate":"2021-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"78457701","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1