{"title":"REDESIGN OF SEWING OPERATOR SEAT USING REVERSE ENGINEERING METHOD","authors":"Hidayati Hidayat","doi":"10.21107/ijseit.v6i2.14293","DOIUrl":"https://doi.org/10.21107/ijseit.v6i2.14293","url":null,"abstract":"We often see that many of the chairs that tailor tend to have a long shape and the width of the seat is quite narrow. The problem of working attitude faced by the sewing machine while running from a non-ergonomic work chair is the attitude of forced labor such as: lifting the operator up, and lifting the shoulder. If the ergonomic problem is not corrected, it will certainly give an excessive burden, musculoskeletal complaints which will be followed by a decrease in the level of work productivity. Therefore, it is necessary to conduct research in an effort to overcome the problems that arise. For this purpose, research was conducted on the Development and Design of Sewing Operator Chairs Using the Reverse Engineering Method. The number of research samples taken were 26 operators. In this study, it was found that there were 5 parts of the operator's seat that were repaired, namely in the seat connection, seat support mat, backrest, seat mat, and frame. And for the Popliteal Length percentile data at the 50th percentile, Hip width using the 95th percentile, Popliteal height using the 50th percentile.","PeriodicalId":14149,"journal":{"name":"International Journal of Engineering, Science and Information Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-07-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"75722800","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Analysis of Threshold Angle Variations on The Quality of Finishing Free-form Surface in CNC Milling Process","authors":"Dhika Aditya Purnomo, Fipka Bisono, Rizal Indrawan","doi":"10.21107/ijseit.v6i2.14952","DOIUrl":"https://doi.org/10.21107/ijseit.v6i2.14952","url":null,"abstract":"The machining process using a combination of steep and shallow strategy is the most widely used strategy for the finishing process on complex models that have many areas of steep walls and shallow floors. Using a single machining strategy on the entire model can lead to long machining times and poor surface finish quality. The steep and shallow strategy can efficiently detect parts of the model that have steep contours and those that have shallow contours. In other words, this strategy can analyze the model surface angle at runtime to identify and divide the machining zone based on the slope angle or commonly called the threshold angle. In this context, the selection of the threshold angle is very important when carrying out the finishing process on free-form surfaces to produce a good surface quality. This study was conducted to determine the optimum threshold angle that can produce the minimum surface roughness between steep areas and shallow areas. Threshold angles that were varied were 20°, 30° and 40°. Machining was carried out using Ballnose type cutting tools with a diameter of 6 mm. Then the stepover and stepdown is 0.1 mm for the finishing process on the surface of the propeller product made of Aluminum by using a CNC Milling machine. From the experimental results, the most optimum threshold angle is at an angle of 40° with an average roughness value in the steep area of 1.9 mm and in the shallow area of 1.3mm and a total average roughness of 1.6mm.","PeriodicalId":14149,"journal":{"name":"International Journal of Engineering, Science and Information Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-07-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88011009","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"THE IMPACT OF FEATURE SELECTION ON THE PROBABILISTIC MODEL ON ARRHYTHMIA DIAGNOSIS","authors":"M. Syarief, Mulaab Mulaab, H. Husni","doi":"10.21107/ijseit.v6i2.15265","DOIUrl":"https://doi.org/10.21107/ijseit.v6i2.15265","url":null,"abstract":"Arrhythmia is a type of cardiac illness identified by an irregular heart rhythm that can be either too rapid or too slow. An electrocardiograph method is required to diagnose arrhythmia. Electrocardiogram, ECG, is the result of this Electrocardiograph process. The ECG is then utilized as a diagnostic tool for arrhythmia. Because the ECG data is so extensive, an adequate processing procedure is required. Understanding the ECG data can be done in various ways, one of which is classification. Naïve Bayes is a classification technique that can handle enormous amounts of data. ECG data has a lot of characteristics, which makes classification more difficult. Feature selection can be used to eliminate non-essential features from a dataset. This research aimed to determine the feature selection’s impact on the Naïve Bayes classification. It was proven by increased accuracy by 4%, precision by 0.13, recall by 0.13, and f-measure by 0.14. The computation time was 0.03 seconds faster. The highest performance was obtained by classification with 80 features. The accuracy was 93%, precision and recall were 0.45, f-measure was 0.42, and computation time was 0.10 seconds.","PeriodicalId":14149,"journal":{"name":"International Journal of Engineering, Science and Information Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-07-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74439351","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Static Loading Analysis of Chips Chopper Machine Design with Feeder Spring Addition","authors":"A. C. Arifin, R. M. Bisono, W. Rezika","doi":"10.21107/ijseit.v6i2.15496","DOIUrl":"https://doi.org/10.21107/ijseit.v6i2.15496","url":null,"abstract":"This study aims to design an assorted chip chopper that can cut various kinds of raw materials for making chips such as cassava, sweet potato, taro and so on. Product design is important to carry out the production process. Product design helps estimate and analyze requirements with more accurate results than without doing this process. The design in this study was carried out using the Solidworks 2020 software. The dimensions of the machine obtained from the design results were 330 mm long, 330 mm wide, and 285 mm high with a mass of 1.59 kg. The novelty of the design that has been made is the addition of a feeding spring, so that the material input process is more stable and safer. Feeding springs can also improve the quality of the cut. In addition to making the design, a simulation of the calculation of the maximum von Mises value is also carried out with the aim of knowing the safety factor of the design that has been made. From the simulation results, the maximum von Mises Stress value of Force 1 is 1,470 MPa, and Force 2 is 9,846 MPa. This value is obtained from the provision of Force 1 32.49758 and Force 2 18.718. This value is far below the yield strength of the material (250 MPa) so it can be concluded that the design is safe to proceed to the production process.","PeriodicalId":14149,"journal":{"name":"International Journal of Engineering, Science and Information Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-07-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"78252897","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Analisa Kelayakan Investasi Saham Dengan Pendekatan Capm Dan Rvar (Studi Pada Perusahaan Otomotif Dan Komponen Di Bei Tahun 2014 – 2018)","authors":"Khalifah Eka Yaniar Putri","doi":"10.21107/ijseit.v6i2.15183","DOIUrl":"https://doi.org/10.21107/ijseit.v6i2.15183","url":null,"abstract":"Tujuan dari penelitian ini adalah untuk membantu investor mengetahui saham mana yang menawarkan pengembalian terbaik untuk jumlah risiko yang minim. Metode deskriptif dengan pendekatan kuantitatif digunakan untuk melakukan penelitian ini dengan teknik Purposive sampling digunakan. Ada 10 perusahaan yang diambil dari 13 perusahaan otomotif dan komponen. Temuan metode CAPM mengungkapkan bahwa ada 2 perusahaan yang termasuk saham efisien yaitu BRAM dan MASA. Dari hasil metode RVAR ada 4 saham tertinggi yaitu BRAM, MASA, INDS dan ASII.","PeriodicalId":14149,"journal":{"name":"International Journal of Engineering, Science and Information Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-07-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84777453","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Design and manufacture of Fiberglass Pipe Cutting Machine with Adjustable Holder","authors":"Rizal Indrawan","doi":"10.21107/ijseit.v6i2.15179","DOIUrl":"https://doi.org/10.21107/ijseit.v6i2.15179","url":null,"abstract":"Fiberglass is a material that is used for several products. This material was chosen because it has many advantages compared to other materials, namely it has better resistance, relatively affordable production costs and is easy to shape. PT.X is one of the manufacturing companies engaged in fiberglass, namely the manufacture of pipes and body from vehicles. In this case study the company still uses hand milling and manual processing. Fiberglass pipe in this company is molded indirectly to the size requested by the customer, therefore a cutting process is needed to get the required pipe length. The blade used specifically is a diamond-coated cutting blade because the fiber material is not heat-resistant. In this research, the researcher wants to design a fiberglass pipe cutting machine with an adjustable holder that can be adjusted so that it can cut various pipe sizes. Making the design of this machine is done using Fusion 360 software. The making of the machine includes the cutting process, grinding process, and welding process. The machine can cut a pipe with a diameter of 100 mm in 20 seconds and for a pipe with a diameter of 500 mm in 1 minute 20 seconds.","PeriodicalId":14149,"journal":{"name":"International Journal of Engineering, Science and Information Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-07-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76878208","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Yoga Ahdiat Fakhrudi, Kholis Nur Faidzin, R. M. Bisono
{"title":"Effect of Composite Composition on Mechanical Properties of Banana Fiber Composites with Epoxy Matrix for Functional Materials","authors":"Yoga Ahdiat Fakhrudi, Kholis Nur Faidzin, R. M. Bisono","doi":"10.21107/ijseit.v6i2.15804","DOIUrl":"https://doi.org/10.21107/ijseit.v6i2.15804","url":null,"abstract":"Technological developments and the influence of globalization have an impact on increasing the need for the amount of material for industry. The many disadvantages of metal materials due to their large mass, difficult manufacturing processes, corrosive properties, and high production costs have resulted in reduced use of metal materials in various products. Nowadays, there are many replacement materials with mechanical properties that can resemble metal materials such as composites. The role of composites is very important in the development of today's industrial world. This study wanted to determine the effect of the composite composition of rias banana fiber and teak sawdust with epoxy resin on the mechanical properties of the composite. The results showed that the comparison of the composition of the composite using rias banana fiber and teak sawdust with an epoxy matrix had an effect on the mechanical properties. Increasing the percentage of resin composition increases the value of the surface hardness of the composite. The highest level of Rockwell hardness with a value of 117 HRB in sample D and the lowest 109 HRB in sample A. While the highest max strength value was produced by sample C with a composition of teak sawdust: rias banana fiber: epoxy is 20% : 40% : 40 %. The conclusion of this research is the more resin composition will increase the composite hardness test value.","PeriodicalId":14149,"journal":{"name":"International Journal of Engineering, Science and Information Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-07-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"77119062","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Application of Artificial Intelligence SSD MobileNet and Tiny YOLOv2 for Food Recipe Search","authors":"H. Purwanto, Aldi Novriadi, Fatah At Thariq","doi":"10.52088/ijesty.v2i3.276","DOIUrl":"https://doi.org/10.52088/ijesty.v2i3.276","url":null,"abstract":"Recipes are guides to making something together with notes on ingredients and their amount. To be able to make food, of course, the cook must prepare the ingredients in advance to be processed into ready-to-eat dishes. Often people have a lot of food ingredients but don't know how to process them. Cooking without seriousness, of course, some people fail when making a dish. Back then, people depends on recipe that was passed down from generation to generation. Now, the digital world is growing rapidly. Anything can be done with increasingly modern technology. Everything needed is accessible with today's technology. Everything is so easy, including the matter of food. Even so, in this digital era, people use smartphones but still cannot use them properly. Many of them use search engines so they need to sort out which are real recipes and which are just random recipes. The purpose of this study is to help people find recipes by taking photos of food ingredients and then finding out what can be made from these ingredients. This technique uses Artificial Intelligence (AI) with MobileNet and Tiny YOLOv2 SSD modules. The design uses the Unified Modeling Language (UML). The study used experimental methods to test the accuracy of the AI used. Data collection will be utilizing a literature study. This research uses agile for system development. Test results show that the SSD MobileNet model has a guessing accuracy of 77%, while Tiny YOLOv2 is 81%. The guessing accuracy might get higher if good camera quality is used","PeriodicalId":14149,"journal":{"name":"International Journal of Engineering, Science and Information Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-07-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"89234394","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
H. Purwanto, Mohamad Gifahri Addiansyah, Fauzi Ramdani, Akbar Al Ghifari
{"title":"Android-Based Fashion Stylist and Event Outfit Applica-tion","authors":"H. Purwanto, Mohamad Gifahri Addiansyah, Fauzi Ramdani, Akbar Al Ghifari","doi":"10.52088/ijesty.v2i3.277","DOIUrl":"https://doi.org/10.52088/ijesty.v2i3.277","url":null,"abstract":"Fashion or style of dress as a form of self-expression, is closely related to the way people communicate values, personality, status, identity, and feelings to others. Adolescence is a period in which a person experiences considerable physical development where they are more sensitive to their appearance, today's teenagers enjoy trends that are appropriate for their time and strive to become a well-known trendsetter among their circles. The purpose of this research is to help the public, especially teenagers, to have knowledge about modern fashion trends in Indonesia. The application development method used is the agile method and the data collection techniques used are observation, interviews and literature study. The modeling language used is UML including Use Case Diagrams, Use Case Scenarios, Activity Diagrams, Class Diagrams and the programming languages that will be used are Java, Android Studio, then SQLite as a place for database design. The results of this study aim to develop an Android-based fashion stylist and event outfit application as well as assist in simplifying the process of choosing clothes that are suitable for use and can save time in choosing clothing ideas of interest so as to provide an overview of modern fashion in Indonesia and can be worn in accordance to the event Outfit to be attended, and according to the number of events to be held.","PeriodicalId":14149,"journal":{"name":"International Journal of Engineering, Science and Information Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-07-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"91540548","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Rahman, S. Hasibuan, Dwika Karima Wardani, Agus Ardi
{"title":"Effect of Media Type and Storage Duration on Viability of Cocoa (Theobroma cacao L.) Seeds","authors":"A. Rahman, S. Hasibuan, Dwika Karima Wardani, Agus Ardi","doi":"10.52088/ijesty.v2i3.263","DOIUrl":"https://doi.org/10.52088/ijesty.v2i3.263","url":null,"abstract":"This study aims to determine the best storage media and storage time for cocoa seeds. The research was carried out at the Plant Physiology Laboratory, Faculty of Agriculture, Medan Area University. The analytical method used is Completely Randomized Design (CRD) with treatments, namely No Storage Media, Use of PE Plastic Storage Media + 1 Week Storage, PE Plastic + 2 Weeks Storage, PE Plastic + 3 Weeks Storage, Aluminum Foil Paper + 1 Week Storage, Aluminum Foil + 2 Weeks Storage, Aluminum Foil Paper + 3 Weeks Storage, Burlap Sack + 1 Week Storage, Burlap Sack + 2 Weeks Storage, Burlap Sack + 3 Weeks Storage, Glass Bottle + 1 Week Storage, Glass Bottle + 2 Weeks Storage , Glass Bottle + 3 Weeks of Storage, a total of 12 treatments with 3 replications. The data were analyzed statistically with the F test at a 5% significance level. If F Count is greater than F Table 5%, then it is continued with the Duncan' New Multiple Range Test (DNMRT) at a level of 5%. The results showed that the treatment on several storage media had a significant effect on the simultaneous growth of cocoa seeds. And the length of time for storing seeds for one week was significantly different, there were parameters for observing seed germination, seed growing simultaneously and seed growing speed.","PeriodicalId":14149,"journal":{"name":"International Journal of Engineering, Science and Information Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-07-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83693537","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}