Polymer Engineering & Science最新文献

筛选
英文 中文
The process‐structure–property relationship of 3D printed G‐Polymer using fused filament fabrication technique 使用熔融长丝制造技术的三维打印 G 聚合物的工艺-结构-性能关系
Polymer Engineering & Science Pub Date : 2024-04-13 DOI: 10.1002/pen.26748
Pooyan Parnian, Pietro Russo, A. Squillace, Alberto D’Amore
{"title":"The process‐structure–property relationship of 3D printed G‐Polymer using fused filament fabrication technique","authors":"Pooyan Parnian, Pietro Russo, A. Squillace, Alberto D’Amore","doi":"10.1002/pen.26748","DOIUrl":"https://doi.org/10.1002/pen.26748","url":null,"abstract":"The ever‐increasing demand for additive manufacturing (AM) is driven by the technology's rapid prototyping and flexible manufacturing benefits. Among the various AM techniques, fused filament fabrication (FFF) is one of the most commonly used techniques, in which thermoplastic polymer filaments are deposited layer by layer to create the final part. This technique has been used extensively in various sectors. However, new materials have yet to be developed for use in FFF. This research aims to introduce a new biodegradable highly amorphous polyvinyl alcohol (HAVOH), commercially known as G‐Polymer (GP), into the scope of FFF, to propose a process window for the fabrication of parts with enhanced mechanical properties and to discover the process‐structure–property relationship for this material. This study investigates the effect of five key parameters in GP FFF, including raster angle, number of contours, nozzle temperature, build platform temperature, and print speed. The results of the chemical, thermal, and thermo‐mechanical analysis of the filaments before and after hot extrusion of the 3D printer nozzle showed a significant increase in the mechanical properties of the hot‐extruded filaments. In addition, the mechanical characterization of 3D printed parts showed that increasing the number of contours can improve the mechanical properties of parts, while the raster angle can have a complex effect. The mechanical properties of the parts are also improved by reducing the temperature of the nozzle and the build platform. Printing speed, as an essential parameter in AM, was related to the previously mentioned parameters, and the results showed that increasing the printing speed could improve the UTS and Young's modulus of the 3D printed part.\u0000A novel biodegradable polymer (HAVOH) was introduced into the scope of FFF.\u0000The hot extruded G‐Polymer filament from the nozzle showed improved mechanical properties.\u0000180°C nozzle and room temperature platform resulted in improved mechanical properties.\u00003D printed parts with +45°/−45° raster angle show improved mechanical properties\u0000110 mm/s print speed results in higher mechanical strength than 70 mm/s print speed.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"71 8","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140707875","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Evaluation of composites based on virgin rubber/devulcanized rubber reinforced with chemically and radiation activated polyurethane scrap for possible applications 评估以化学和辐射活化聚氨酯废料增强的原生橡胶/脱硫橡胶为基础的复合材料的应用前景
Polymer Engineering & Science Pub Date : 2024-04-13 DOI: 10.1002/pen.26747
Ahmed Abdel‐Hakim, Eman H. Awad, K. El‐Nemr
{"title":"Evaluation of composites based on virgin rubber/devulcanized rubber reinforced with chemically and radiation activated polyurethane scrap for possible applications","authors":"Ahmed Abdel‐Hakim, Eman H. Awad, K. El‐Nemr","doi":"10.1002/pen.26747","DOIUrl":"https://doi.org/10.1002/pen.26747","url":null,"abstract":"Reusing industrial waste is one of the new tactics being used to fight the dumping of solid waste for environmental protection. In the current work, the waste polyurethane (WPU) was ground to a fine powder and used for reinforcement of devulcanized waste rubber/styrene butadiene rubber (DWR/SBR) blends. DWR/SBR/WPU composites were prepared using (0, 3, 6, 9, 15, 30) phr (parts per hundred of rubber) of WPU. It was hypothesized that the treatment of WPU with trimethylolpropane triacrylate (TMPTMA) and irradiated at 10 kGy would improve its compatibility with the DWR/SBR blend and, consequently, its reinforcement efficacy. The incorporation of 30 phr of treated WPU (TWPU) improved the tensile strength (TS) by 47.7% and 8.6% compared to neat DWR/SBR and composites containing 30 phr of untreated WPU (UWPU). In addition, the incorporation of TWPU improved other mechanical characteristics such as tear strength, hardness, and abrasion resistance. As a result of increasing polarity and cross‐link density within the DWR/SBR blend after the addition of polar WPU, the resistance to motor oil was improved. The outcomes are encouraging from the standpoint of the circular economy and help produce high‐performing, reasonably priced DWR/SBR composites for a range of industrial uses, especially in the floor tiles application.\u0000Waste polyurethane (WPU) was activated using gamma irradiation in the presence of TMPTMA.\u0000The treatment of WPU improved its compatibility with DWR/SBR blend.\u0000The impact of WPU treatment on the properties of DWR/SBR blend was investigated.\u0000TWPU improved the mechanical properties of DWR/SBR blend more than UWPU.\u0000TWPU increased the motor oil resistance of DWR/SBR blend more than UWPU.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"64 12","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140707914","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Fabrication and characterizations of screw pine root fiber reinforced soy composite as sustainable green composite 作为可持续绿色复合材料的螺旋松根纤维增强大豆复合材料的制备与特性分析
Polymer Engineering & Science Pub Date : 2024-04-12 DOI: 10.1002/pen.26746
S. S. Pattnaik, Diptiranjan Behera, Yubraj Pani, Nigamananda Das, M. Misra, A. Mohanty, A. K. Behera
{"title":"Fabrication and characterizations of screw pine root fiber reinforced soy composite as sustainable green composite","authors":"S. S. Pattnaik, Diptiranjan Behera, Yubraj Pani, Nigamananda Das, M. Misra, A. Mohanty, A. K. Behera","doi":"10.1002/pen.26746","DOIUrl":"https://doi.org/10.1002/pen.26746","url":null,"abstract":"Screw pine root fibers are engineering fibers that have yet to be explored in terms of its chemistry with bio‐resin in biodegradable composites to replace nonbiodegradable thermoplastics used in packaging, automobiles, furniture, and industrial sectors. Screw pine root fibers are reinforced with soy, poly(vinyl alcohol), and soy‐poly(vinyl alcohol) resin systems in this work to create a variety of composites. Composites demonstrated highest amount of tensile strength at around 39.7 MPa, 37.6 MPa of flexural property, along with an impact strength around 12.4 kJ/m2. The thermal solidity of the optimized material was determined to be 235°C. After 24 hours of immersion, the composite had the lowest water absorption of 18.4%. All composites were shown to be biodegradable, losing about 54.2%–72.9% of their original mass after 60 days in soil burial. Unique characteristics such as the use of low‐cost agricultural materials, water‐based resin, stable composite, and properties such as moderately strong, safe disposal after service periods make these manufactured composites market feasible as consumer‐friendly/ecofriendly green products.\u0000Screw pine root fibers were extracted from waste roots and used as reinforcement.\u0000The tensile strength of the composite was achieved as 39.7 MPa.\u0000The water absorption of hybrid composite was found 30.8% after 24 h.\u0000After 60 days under soil burial, composite lost 67.5% of its original weight\u0000Developed composites can be good alternant for nondegradable thermoplastic.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"6 20","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140712144","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Influence of selected contaminations and melt filtration on the properties of ABS and ABS recyclate 选定污染物和熔体过滤对 ABS 和 ABS 再生料性能的影响
Polymer Engineering & Science Pub Date : 2024-04-12 DOI: 10.1002/pen.26743
Barbara Liedl, C. Burgstaller
{"title":"Influence of selected contaminations and melt filtration on the properties of ABS and ABS recyclate","authors":"Barbara Liedl, C. Burgstaller","doi":"10.1002/pen.26743","DOIUrl":"https://doi.org/10.1002/pen.26743","url":null,"abstract":"Plastic recyclates can be contaminated with a variety of impurities due to their previous life, which cannot always be perfectly separated in recycling pretreatment steps. Hence melt filtration is an important step in reprocessing plastic recyclates to achieve material of sufficient purity, but it also leads to more stress on the material due to higher pressures and longer processing times. In our study, we investigated the influence of typical particulate impurities as may occur in recyclate on the mechanical and rheological properties of ABS. Even low amounts of contaminations lowered the key properties. Melt filtration of post‐consumer ABS recyclate with different mesh size melt screens showed little improvement of mechanical properties, but longer idle times and loss of material. Damage to the material caused by finer filtration could be shown by thermal measurements.\u0000Determination of properties of ABS contaminated with 0.5–2.0 wt.% of selected impurities (wood and rubber particles).\u0000Melt filtration of post‐consumer ABS recyclate with different melt screens.\u0000Investigation of process and properties of filtered ABS recyclate.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"11 22","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140710411","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Fiber Bragg grating detection of gel time and residual strain of curing in epoxy resins 光纤布拉格光栅检测环氧树脂的凝胶时间和固化残余应变
Polymer Engineering & Science Pub Date : 2024-04-11 DOI: 10.1002/pen.26751
Yanpeng Hao, Yingying Zhang, Zikui Shen, Dongyuan Du, Shenglong Huang, Lin Liu, Lei Huang
{"title":"Fiber Bragg grating detection of gel time and residual strain of curing in epoxy resins","authors":"Yanpeng Hao, Yingying Zhang, Zikui Shen, Dongyuan Du, Shenglong Huang, Lin Liu, Lei Huang","doi":"10.1002/pen.26751","DOIUrl":"https://doi.org/10.1002/pen.26751","url":null,"abstract":"The curing shrinkage of epoxy resin can generate residual strains and internal stresses that reduce the material's strength and life. In this paper, a thermocouple‐compensated fiber grating detection method for the gel time and residual strain in epoxy resin is proposed. The strain evolution and glass transition temperature of E51/W93 epoxy systems with different Al2O3 contents cured at 30°C are detected by fiber Bragg gratings and DSC tests. The generation mechanism of residual strain in epoxy resin filled with Al2O3 fillers is studied. The gel time, gel temperature and residual strain of epoxy resin can be measured by this method. The results show that the cure shrinkage of epoxy is affected by chemical shrinkage, thermal expansion or shrinkage, and demolding, resulting in residual strain of the material after curing. Moreover, the glass mold has a great interference with the curing shrinkage of epoxy. The Al2O3 filler can prolong the gel time of E51/W93 epoxy systems, and reduce the exothermic peak temperature of curing. When the content of Al2O3 filler exceeds 44.44 wt.%, the low proportion of epoxy and the thermal conductivity of the filler make the curing shrinkage of epoxy during the heating stage mainly affected by chemical shrinkage. The glass transition temperature of the epoxy with Al2O3 content of 70.59 wt.% is the maximum, and the residual strain is at a low level. This method is helpful to analyze the curing shrinkage characteristics of materials, and is of great significance for evaluating the properties of epoxy cured products and guiding the optimization of material parameters.\u0000A method for measuring the gel time and residual strain of curing in epoxy resin is proposed.\u0000The study focuses on the detection of key parameters during the curing of epoxy resins with different Al2O3 contents.\u0000The aim is to analyze the curing shrinkage and residual strain generation mechanism of epoxy resin filled with different contents of Al2O3.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"24 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140715216","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Effect of blend composition on the adhesion strength of EVA‐g‐MA/LLDPE‐g‐MA films to epoxy substrates 混合成分对 EVA-g-MA/LLDPE-g-MA 薄膜与环氧树脂基底粘附强度的影响
Polymer Engineering & Science Pub Date : 2024-04-11 DOI: 10.1002/pen.26742
Farzad Gholami, Brandon Cordeiro, K. Sarikhani, E. Behzadfar
{"title":"Effect of blend composition on the adhesion strength of EVA‐g‐MA/LLDPE‐g‐MA films to epoxy substrates","authors":"Farzad Gholami, Brandon Cordeiro, K. Sarikhani, E. Behzadfar","doi":"10.1002/pen.26742","DOIUrl":"https://doi.org/10.1002/pen.26742","url":null,"abstract":"Heat shrink sleeves (HSS) are multilayer polymers that provide corrosion resistance for welding joints of steel pipes. Within the HSS structure, the adhesive layer is a blend of components, such as ethylene vinyl acetate (EVA) and linear low‐density polyethylene (LLDPE). In this study, a systematic approach was employed to investigate the effect of the rheology and blend composition of the maleic anhydride‐modified EVA and maleic anhydride‐modified LLDPE (EVA‐g‐MA/LLDPE‐g‐MA) adhesive layer, prepared by melt processing, on its adhesion properties. Various characterization techniques were employed to investigate the local morphology of the prepared blends at different zones. Peel strength tests were used to characterize the adhesion strength of the prepared adhesives. Our findings demonstrate that the local distribution of EVA‐g‐MA within LLDPE‐g‐MA plays a crucial role in the adhesion strength of the adhesive. The results show that the adhesion strength enhanced by nearly 45% as the composition of EVA‐g‐MA at the surface went up by 20%, shifting the failure location from the epoxy/adhesive interface to the bulk of the adhesive layer. Our hypothesis of the decrease of EVA‐g‐MA intrachain bonding and increase in the EVA‐g‐MA free chain amount in the presence of LLDPE‐g‐MA to improve the adhesion properties was corroborated through our calorimetry results where the relative EVA‐g‐MA crystallinity decreased as LLDPE‐g‐MA was introduced to the blend. The findings of our study highlight the importance of rheological behavior and blend composition in obtaining optimized performance of adhesives within the HSS structure.\u0000Compression molding of EVA‐g‐MA/LLDPE‐g‐MA induces a layered morphology.\u0000Local distribution EVA‐g‐MA/LLDPE‐g‐MA components influence their adhesion.\u0000EVA‐g‐MA at the interface improves the adhesion of EVA‐g‐MA/LLDPE‐g‐MA.\u0000LLDPE‐g‐MA suppresses the EVA‐g‐MA crystallinity.\u0000EVA‐g‐MA/LLDPE‐g‐MA composition affects adhesion at different temperatures.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"2 12","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140713064","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Formation of interfacial molecular film and metal‐trapping function of azacalixarene‐containing copolymers having spherulite‐forming ability 具有球状形成能力的含氮杂环丁二烯共聚物界面分子膜的形成和金属捕获功能
Polymer Engineering & Science Pub Date : 2024-04-10 DOI: 10.1002/pen.26735
Yuto Otsuki, Ryoma Terui, Yuji Shibasaki, A. Fujimori
{"title":"Formation of interfacial molecular film and metal‐trapping function of azacalixarene‐containing copolymers having spherulite‐forming ability","authors":"Yuto Otsuki, Ryoma Terui, Yuji Shibasaki, A. Fujimori","doi":"10.1002/pen.26735","DOIUrl":"https://doi.org/10.1002/pen.26735","url":null,"abstract":"The interfacial molecular film behavior of a newly synthesized copolymer having spherulite‐forming ability and consisting of an azacalixarene moiety and a polyethylene glycol linker was investigated. Furthermore, the ability of the azacalixarene ring in the copolymer Langmuir monolayer to trap metals from the subphase was examined. The copolymer formed a monolayer at the air/water interface with high‐density packing. In addition, the corresponding copolymer formed a stable interfacial monolayer whose behavior did not change significantly as the temperature of the subphase changed. The monolayer morphology exhibited a dot‐like crystalline domain. When the subphase contained cadmium ions, the cyclic moiety showed the ability to trap the metal cations. In this case, the distortion angle of the cup‐shaped conformation of the cyclic moiety in the organized molecular film expanded after metal trapping.\u0000LB film of a copolymer containing azacalixarene and PEG units was prepared.\u0000The copolymer formed a dense packing in the LB film.\u0000Copolymer film formed a surface morphology containing crystalline grains.\u0000The copolymer trapped Cd ions in the azacalixarene ring from the subphase.\u0000Due to trapping of Cd ions, the distortion angle of the ring widened by 7°.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"616 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140718933","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Peppermint oil‐infused polylactic acid films: A novel approach for antimicrobial and biodegradable food packaging 注入薄荷油的聚乳酸薄膜:抗菌和可生物降解食品包装的新方法
Polymer Engineering & Science Pub Date : 2024-04-09 DOI: 10.1002/pen.26737
Ayca Aydogdu Emir, E. Yıldız, Emrah Kirtil
{"title":"Peppermint oil‐infused polylactic acid films: A novel approach for antimicrobial and biodegradable food packaging","authors":"Ayca Aydogdu Emir, E. Yıldız, Emrah Kirtil","doi":"10.1002/pen.26737","DOIUrl":"https://doi.org/10.1002/pen.26737","url":null,"abstract":"Extensive research is currently dedicated to creating biodegradable packaging materials that match the qualities of traditional synthetic packaging materials. Among these options, polylactic acid (PLA) is noteworthy. PLA is a renewable‐source‐derived thermoplastic polymer with excellent barrier properties, mechanical strength, and a strong safety profile. To enhance food product shelf life, active packaging materials, incorporating functional ingredients like antimicrobials, have gained prominence. Peppermint essential oil is one such active ingredient, offering potential improvements in preserving food freshness and safety. This study's objective is to craft antimicrobial, biodegradable food packaging materials by blending peppermint oil into PLA films. Various peppermint oil concentrations (1.25%, 1.875%, and 2.5% w/v) were blended with PLA to assess their impact on opacity, water vapor permeability (WVP), mechanical and thermal properties, and antimicrobial characteristics. Higher peppermint oil concentrations increased opacity, making them advantageous for light‐sensitive food items. These films reduced WVP without affecting PLA's thermal stability. Antimicrobial effectiveness was evaluated against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), showing inhibition with 1.875% and 2.5% w/v peppermint oil concentrations. Compared to control, PLA films with peppermint oil extended the shelf life of packaged chicken breast meats from 3 to 8 days. As a result, incorporating peppermint oil into PLA films presents a promising solution for advanced antimicrobial and biodegradable food packaging.\u0000The incorporation of peppermint oil resulted in higher opacity values.\u0000Peppermint incorporated PLA films showed antimicrobial activity.\u0000Peppermint oil addition decreased water vapor permeability of PLA films.\u0000Peppermint oil added PLA films increased the shelf life of chicken meat up to 8 days.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"4 6","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140727182","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Enhancing CO2/N2 and CO2/CH4 separation in mixed matrix membrane: A comprehensive study on Pebax®1657 with SSMMP/IL for improved efficiency 提高混合基质膜中 CO2/N2 和 CO2/CH4 的分离效果:关于 Pebax®1657 与 SSMMP/IL 的综合研究,以提高效率
Polymer Engineering & Science Pub Date : 2024-04-08 DOI: 10.1002/pen.26732
Henrique Z. Ferrari, Franciele L. Bernard, L. D. Dos Santos, G. Dias, C. Le Roux, P. Micoud, François Martin, S. Einloft
{"title":"Enhancing CO2/N2 and CO2/CH4 separation in mixed matrix membrane: A comprehensive study on Pebax®1657 with SSMMP/IL for improved efficiency","authors":"Henrique Z. Ferrari, Franciele L. Bernard, L. D. Dos Santos, G. Dias, C. Le Roux, P. Micoud, François Martin, S. Einloft","doi":"10.1002/pen.26732","DOIUrl":"https://doi.org/10.1002/pen.26732","url":null,"abstract":"Mixed matrix membranes (MMMs) have been proposed as a solution to surmount Robeson's trade‐off curves and have demonstrated efficacy in gas separation processes, particularly for CO2 capture. In this study, MMMs based on Pebax®1657 were obtained utilizing synthetic silico‐metallic mineral particles (SSMMP) functionalized with ionic liquids (ILs). The objective was to attain enhanced CO2 separation performance, thereby showcasing the potential to mitigate the environmental repercussions of industrial processes that entail greenhouse gas emissions. For membrane production, an ethanol/water mixture was used as solvent, with the SSMMP/IL content varying from 0.5 to 20% by weight of the polymer. The primary aim of this study was to assess the effect of filler addition on permeability and selectivity for CO2, CH4, and N2. Comprehensive analyses, including SEM, FTIR, TGA, DSC, and DMA were conducted to evaluate the properties of the produced membranes. Gas permeability and ideal selectivity were measured at 25°C and different pressures, ranging from 1 to 7 bar. Characterization results demonstrate that the glass transition temperature (Tg) of MMMs increased compared to pure Pebax®1657, indicating that the addition of SSMMP/IL reduces the flexibility of the PEO chains, forming a rigid interface at the polymer/filler, which may enhance selectivity. This effect, corroborated by gas permeation, was observed for both CO2/N2 and CO2/CH4. For CO2/N2, the highest selectivity was achieved at lower filler concentrations, gradually decreasing as the filler load increased. MMM‐0.5 wt% achieved the highest selectivity of 91.96. The membrane CO2 permeability rose with an elevated filler content, rising from 84.21 for pure Pebax®1657 to 192.17 Barrer for MMM‐20 wt% at 4 bar. The permeability results were influenced by the gas diffusion coefficients of the MMMs, which increased with increasing SSMMP/IL content. The effect of feed pressure on MMM‐5 wt% was also assessed, revealing that CO2 permeability increased with increasing pressure, from 126.72 Barrer at 1 bar to 165.56 Barrer at 7 bar. This work showcased the viability of MMMs incorporating SSMMP/IL for industrial use, as they displayed separation capabilities that exceeded the 2008 Robeson upper bound.\u0000Mixed matrix membranes based on Pebax®1657 and SSMMP‐20%‐[bmim][Tf2N] were prepared.\u0000CO2 permeability of the MMMs was increased by 128% and CO2/N2 selectivity by 83%.\u0000Higher CO2 pressures increase MMMs permeability.\u0000The obtained MMMs have separation performances above the Robeson upper Bound.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"180 S451","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140730788","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Evaluation of the impact of natural weathering on the properties of high‐density polyethylene bottles by experimental approach 用实验方法评估自然风化对高密度聚乙烯瓶性能的影响
Polymer Engineering & Science Pub Date : 2024-04-06 DOI: 10.1002/pen.26739
Rabiaa Elkori, Amal Lamarti, Khalid El had, A. Hachim, Imane Yamari
{"title":"Evaluation of the impact of natural weathering on the properties of high‐density polyethylene bottles by experimental approach","authors":"Rabiaa Elkori, Amal Lamarti, Khalid El had, A. Hachim, Imane Yamari","doi":"10.1002/pen.26739","DOIUrl":"https://doi.org/10.1002/pen.26739","url":null,"abstract":"This work presents an in‐depth experimental study aimed at assessing the impact of natural weathering on the behavior of high‐density polyethylene (HDPE) bottles. To this end, several analytical techniques were employed, including Fourier transform infrared spectroscopy (FTIR) to examine molecular changes, scanning electron microscopy (SEM) to study morphology, thermogravimetric analysis (TGA) to assess thermal properties, and tensile and compression tests to evaluate mechanical properties. The results obtained reveal significant changes in HDPE exposed to natural weathering. FTIR analysis enabled us to identify that the HDPE bottles had been subjected to an oxidation process initiated by the absorption of solar radiation during natural weathering treatments, while SEM analysis showed the presence of holes resulting from the detachment of material fragments after exposure, TGA analysis confirms the impact of natural exposure time on the decrease in the average molecular weight and chemical degradation of HDPE macromolecules, through a reduction in the initial degradation temperature and the maximum thermodegradation temperature. However, tensile and compressive tests showed a reduction in the mechanical strength of HDPE after exposure to natural conditions, with notable variations depending on environmental conditions, making the material damaged. These results enabled us to calculate the damage caused by three damage laws. These results offer important insights into the mechanisms of HDPE degradation under the influence of natural climatic factors, paving the way for the development of more resistant and durable packaging materials in the face of variable environmental conditions.\u0000The objective of this study is to analyze and describe the effects of natural weathering on high‐density polyethylene bottles. This involves evaluating the deterioration of physicochemical, mechanical, and morphological properties. Additionally, three damage laws are employed to assess the extent of damage inflicted by this material.\u0000Analytical techniques were used, including SEM, FTIR, and TGA, tensile and compressive test.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"35 21","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140735190","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书