Stefanni S. Everton, Marcos Gusmão, B. F. Oechsler, C. Castor, J. C. Pinto
{"title":"Investigation of swelling degree of polypropylene beads with monomers and blowing agents","authors":"Stefanni S. Everton, Marcos Gusmão, B. F. Oechsler, C. Castor, J. C. Pinto","doi":"10.1002/pen.26783","DOIUrl":"https://doi.org/10.1002/pen.26783","url":null,"abstract":"The swelling step of polymer particles or beads with blowing agents and monomers is one of the factors that directly affect the performance properties of expandable core–shell particles, including morphology, composition, and expansion degree. In this regard, the present work investigated the effect of swelling agents on polypropylene (PP) beads. Swelling agents were used to perform swelling tests in both bulk and suspension media at different temperatures and stirring rates. Additionally, a mass transfer model was implemented to predict the swelling degree at the analyzed experimental conditions. The obtained results indicated the important effect of temperature on swelling in both bulk and suspension tests. Among the investigated swelling agents, higher rates of PP beads swelling were observed when styrene was employed (~80 wt%), when compared to methyl methacrylate (~20 wt%), vinyl acetate (~9 wt%), and acrylonitrile (~6 wt%). Moreover, it seems that the stirring rate does not exert a considerable influence on the swelling rates, indicating that swelling is controlled by thermodynamic constraints and particle properties. Finally, experimental results showed that the final saturation concentration of the swelling agent can be reached before 1 hour of swelling, indicating that the swelling kinetics can be much faster than the polymerization kinetics.\u0000The effects of non‐conventional swelling agents on PP were investigated.\u0000The swelling presented a fast dynamic behavior.\u0000The swelling dynamics was controlled by the solubility of the swelling agent.\u0000The highest swelling degree was obtained with styrene.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"96 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141003011","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Longyu Wang, Yinggang Huang, Pengfei Diao, Biao Li, Yahui Chen, Chuansheng Wang, H. Bian, Yao Xiao, Wei Li
{"title":"Mechanism of the green coagulation processes on the construction of raw rubber network structure","authors":"Longyu Wang, Yinggang Huang, Pengfei Diao, Biao Li, Yahui Chen, Chuansheng Wang, H. Bian, Yao Xiao, Wei Li","doi":"10.1002/pen.26773","DOIUrl":"https://doi.org/10.1002/pen.26773","url":null,"abstract":"Acid coagulation is the most traditional latex coagulation technology, but this coagulation process leads to delayed vulcanization, corrosiveness, and environmental pollution. Different coagulation processes significantly impact the raw rubber network structure, leading to differences in the properties of both raw rubber and rubber vulcanizates. Raw rubber was prepared by three acid‐free coagulation processes: freeze, microwave, and flash drying. The network density, molecular chain flexibility, molecular weight, processing fluidity, and plasticity retention of the raw rubber were characterized, and the vulcanization characteristics, viscoelasticity, mechanical properties, and dynamic mechanical properties of the cured rubber composites were investigated. Raw rubbers prepared by microwave drying and flash drying had higher crosslink density, more flexible molecular chains, larger molecular weight, and wider molecular weight distribution, thereby increasing the crosslink density of rubber vulcanizates. The crosslink density of the raw rubber prepared by microwave drying versus the acid coagulated raw rubber increased by 51% to 105.71 mol/m3, the tensile strength increased by 16% to reach 28.12 MPa, and the elastic modulus and rolling resistance under dynamic stress increased. This paper provides a new idea for analyzing the relationship between the raw rubber network structure and the properties of vulcanized rubber.\u0000Acid‐free raw rubbers are prepared by freeze, microwave, and flash drying.\u0000Coagulation processes significantly impact the raw rubber network structures.\u0000Effects of raw rubber network structures on properties are investigated.\u0000Crosslink density, plasticity retention, and tensile strength are improved.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"69 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141002289","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Improved interfacial adhesion of carbon fiber‐reinforced polydicyclopentadiene layered composite material by modification of norbornene derivatives","authors":"Xian Wang, Zehan Zhang, Feng Gao, Xuelian He","doi":"10.1002/pen.26769","DOIUrl":"https://doi.org/10.1002/pen.26769","url":null,"abstract":"Surface chemical grafting modifications of carbon fibers (CFs) using 5‐(triethoxysilyl)norbornene (TOS), norbornene carboxylic acid tert‐butyl ester (NB‐TBE), and 5‐norbornene‐2,3‐dicarboxylic anhydride (NA) improved interfacial interactions between CFs and poly(dicyclopentadiene) (PDCPD) resin. The ring‐opening metathesis polymerization (ROMP) of DCPD, catalyzed by Grubbs catalyst II, enabled the fabrication of PDCPD/CF layered composite materials with resin and fibers tightly adhered. The optimal composite exhibited remarkable mechanical properties, with a tensile strength of 654.6 MPa and flexural strength of 510.7 MPa. Excellent thermal stability with a maximum weight loss rate in temperatures above 450°C and good chemical resistance with a weight change of about 1% in both acidic and alkaline media highlight the promising potential of these materials for use in harsh environments. The simple yet efficient approach of TOS, NB‐TBE, and NA‐enhanced layered CF shows great promise as advanced composite materials for industrial applications.\u0000Norbornene derivatives such as TOS, NB‐TBE, and NA are suitable modifiers for CF.\u0000ROMP of DCPD and norbornene group onto CFs, fabrication of PDCPD/CF composite materials.\u0000The composite exhibited remarkable interfacial adhesion and mechanical properties.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"102 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141003743","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Fenglian Ma, Chengcheng Zhang, Changming Li, Zhenyu Xu, Hong Zhao
{"title":"Water‐tree aging characteristics of chloroacetic acid allyl ester grafted crosslinked polyethylene","authors":"Fenglian Ma, Chengcheng Zhang, Changming Li, Zhenyu Xu, Hong Zhao","doi":"10.1002/pen.26778","DOIUrl":"https://doi.org/10.1002/pen.26778","url":null,"abstract":"To investigate the inhibition effect of chloroacetic acid allyl ester (CAAE) grafting modification on water‐tree aging in crosslinked polyethylene (XLPE), CAAE grafted XLPE (XLPE‐g‐CAAE) with different CAAE contents are prepared by melt blending and grafting modification method. The accelerated water‐tree aging experiments are carried out by the water‐blade electrode method. It is found that XLPE‐g‐CAAE has a great inhibitory effect on the water‐tree aging compared to XLPE, and XLPE‐g‐CAAE with 1.0 phr CAAE has the most significant effect on the water‐tree growth in the scope of the study. The microstructure of XLPE and XLPE‐g‐CAAE is investigated by thermal elongation, gel content, and static water contact angle, respectively. The results show that the grafting of CAAE containing polar groups can enhance the polarity of XLPE and improve the hydrophilicity, which has a dispersing effect on the polar water molecules entering the polymer. Thus, the water molecules are not easy to gather, inhibiting the water‐tree growth. Meanwhile, although the mechanical properties of XLPE‐g‐CAAE decrease to a small extent, and the relative dielectric constant and dielectric loss factor increase slightly, but the performance still meet the requirements of water‐tree resistance XLPE cable insulation.\u0000CAAE with polar groups was successfully grafted onto XLPE.\u0000The polar groups can enhance the polarity of XLPE to improve the hydrophilicity.\u0000CAAE grafting can inhibit the water‐tree growth in XLPE.\u0000The dielectric properties meet the requirements of water‐tree resistance XLPE.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"53 s43","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141009251","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Chaojie Li, Xue Li, Long Wang, Zi'ang Xia, Jingxue Yang, Na Wang, Yao Li, Heng Zhang
{"title":"Preparation of high‐barrier performance paper‐based materials from biomass‐based silicone‐modified acrylic polymer emulsion","authors":"Chaojie Li, Xue Li, Long Wang, Zi'ang Xia, Jingxue Yang, Na Wang, Yao Li, Heng Zhang","doi":"10.1002/pen.26774","DOIUrl":"https://doi.org/10.1002/pen.26774","url":null,"abstract":"High‐barrier performance, especially under extreme working conditions, is the key to replacing other types of packaging materials with paper‐based materials. In this paper, two biomass‐based polymers, sodium alginate (SA), and chitosan, were used to form a barrier coating with silicone emulsions to prepare a high‐performance paper‐based barrier material. By double coating, the water and oilproof functions were superimposed. The two prepared coated papers were characterized by infrared spectroscopy analysis, contact angle test, and scanning electron microscopy analysis, while their water resistance, oil resistance, thermal oil resistance, and thermal stability were tested. The water and oil repellency were achieved by double coating. The Cobb value of the chitosan‐silicone emulsion‐coated paper reached 5.3 g/m2, with a Kit grade of Level 12, and could block the penetration of castor oil at 80°C within 24 h. The Cobb value of the sodium alginate‐silicone emulsion‐coated paper was 41.6 g/m2, much higher than that of the uncoated paper, with a Kit grade of up to Level 10, which could slow down the rate of castor oil penetration at 80°C within 24 h. The test results showed that there was no chemical reaction between the paper‐based coatings, and the coated paper surface had good film formation, while the double coating method increased the thermal decomposition temperature of the overall barrier coating, effectively improving the thermal stability of the coating and achieving high‐barrier performance at lower cost and under extreme working conditions.\u0000Water and oil resistance under extreme operating conditions.\u0000High‐performance paper‐based barrier materials.\u0000Dual‐layer coating method for water and oil repellency.\u0000High‐barrier performance at lower cost.\u0000Excellent hot oil resistance and thermal stability.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"10 9","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141005901","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ali. A. M. Yassene, Nesreen R. Abd Elwahab, H. M. Eyssa
{"title":"Development of HDPE/natural fiberboard nanocomposite reinforced Bi2O3/BaO and H3BO3: A sustainable approach for gamma and neutron shielding application","authors":"Ali. A. M. Yassene, Nesreen R. Abd Elwahab, H. M. Eyssa","doi":"10.1002/pen.26768","DOIUrl":"https://doi.org/10.1002/pen.26768","url":null,"abstract":"Radiation shielding materials significantly contribute to various fields. In this research, a new eco‐friendly nanocomposite shielding material based on high‐density polyethylene (HDPE) and natural fiberboard (NF) with different concentrations of barium oxide nanowires (BaO), bismuth oxide nanorods (Bi2O3), and boric acid (H3BO3) is constructed and investigated for 137Cs, 60Co gamma ray, and 142Am–Be neutron sources. Mechanical and physical testing and thermal analysis were conducted to assess the impact of nanostructure incorporation on the structural integrity and thermal stability of the nanocomposite. The 60Co gamma and neutron attenuation properties were evaluated using the appropriate radiation sources. The transmission and absorption coefficients of the nanocomposites were measured. The results demonstrated that HDPE/NF filled with BaO, Bi2O3 nanostructure, and boric acid has higher tensile strength and thermal stability than unfilled HDPE/NF. The results displayed that the HDPE/NF filled with 1.5% Bi2O3 and 1.5% BaO improved gamma attenuation and also HDPE/NF/10% boric acid had a high value. The outcomes of this research provide valuable insights into the design and fabrication of radiation shielding materials by understanding the relationship between nanoparticle concentration, radiation attenuation properties, and the mechanical and thermal characteristics of the nanocomposite. This study aims to optimize the performance and applicability of HDPE/NF nanocomposites for radiation protection applications.\u0000Synthesis of BaO nanowires and bismuth oxide (Bi2O3) nanorods by hydrothermal simple method.\u0000Fabrication and characterization of a new HDPE/natural fiberboard (NF) nanocomposite containing BaO/Bi2O3/H3BO3 as an eco‐friendly additive.\u0000The HDPE/NF/1.5% BaO/1.5% Bi2O3 nanocomposite has better tensile strength and more thermal stability.\u0000Usage of HDPE/NF/1.5% BaO/1.5% Bi2O3 nanocomposite that should be utilized for radiation shielding.\u0000Usage of HDPE/NF/1.5% BaO/1.5% Bi2O3/10% H3BO3 nanocomposite that should be utilized for neutron attenuation performance.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"93 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141015912","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
G. Omosa, F. Mwema, E. T. Akinlabi, T. Jen, J. M. Mutua
{"title":"Matrix‐phase material selection for shape memory polymer composites: A comparative analysis of multi‐criteria decision‐making","authors":"G. Omosa, F. Mwema, E. T. Akinlabi, T. Jen, J. M. Mutua","doi":"10.1002/pen.26775","DOIUrl":"https://doi.org/10.1002/pen.26775","url":null,"abstract":"In the present study, the selection of suitable shape memory polymers (SMPs) to be used as the matrix‐phase material with various (In)organic filler materials to achieve the required optimum multi‐stimuli response in shape memory polymer composites (SMPC) systems is analyzed. The selection of these materials is based on their mechanical and physical properties as well as other underlying factors such as cost, availability, shape recovery rate, and aesthetic characteristics. In this study, the entropy method was applied to estimate the weightages of the various criteria while the gray relation analysis (GRA) and the technique for order preference by similarity to ideal solution (TOPSIS). Multi‐criteria decision‐making (MCDM) approaches have been used to rank the suitable matrix‐phase polymer materials for manufacturing shape memory polymer composites (SMPC) system. A total of eight alternative SMP matrix‐phase materials based on a set of nine criteria were analyzed and ranked. The proposed methodology and the result obtained thereof have been illustrated in detail. The results obtained from TOPSIS and GRA methods have been compared to conclude the effects of the material properties on the ranking and the selection of the SMP materials. Among all the eight alternatives considered, thermoplastic polyurethane (TPU) was found to be the best material in both the MCDM methods. The material cost, resistivity, % elongation, and hydrophobicity present the most influencing properties on the SMP material selection, whereas density presents no effect on the SMP matrix material selection. The robustness of the results for the comparative analysis was verified using TOPSIS methodology to validate its reliability. It was revealed that the TPU, polycarbonate, polypropylene, and epoxy‐resin/poly(lactic acid) are the most dominant matrix‐phase SMP material alternatives when a deviation in the entropy weights of the primary evaluation criteria is applied. The novelty of this study is the exploration and application of statistical MCDM methods of engineering material selection problems based on a set of decision criteria, which can be time‐consuming and costly while using experimental analysis methods.\u0000SMPCs are applicable engineering materials thus making their research viable.\u0000SMPC systems can undergo various shape changes under external stimuli.\u0000Selection of matrix‐phase polymer is critical in achieving desired objectives.\u0000GRA and TOPSIS MCDM approaches have been applied in the selection process.\u0000TPU was found as the best material in both methods.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"95 S6","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141016251","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. A. Corona‐Rivera, Martín Rabelero Velasco, V. M. Ovando-Medina, E. Cervantes-González, José Elías Pérez López
{"title":"Fabrication of poly(acrylic acid)/chitosan/linseed mucilage films: Thermal and mechanical properties","authors":"M. A. Corona‐Rivera, Martín Rabelero Velasco, V. M. Ovando-Medina, E. Cervantes-González, José Elías Pérez López","doi":"10.1002/pen.26766","DOIUrl":"https://doi.org/10.1002/pen.26766","url":null,"abstract":"The use of biodegradable polymers in the plastics industry has been increasing in recent years. The study of the chemical, physical, thermal, and mechanical properties of films based on biodegradable components is of interest to technologists because these properties determine their applicability for food packaging. In this work, films based on natural polymers such as linseed mucilage (LM) and chitosan (CH), as well as poly(acrylic acid) (PAA) were obtained through the casting method and using V‐50 as the initiator. The films were characterized through Fourier Transform Infrared spectroscopy, and thermogravimetric analysis, and their water absorption and swelling capacity, and thermal and mechanical properties were determined. Homogenous flexible, translucid, amber‐colored films, with low absorption and solubility in water were obtained. It was demonstrated through Fourier Transform Infrared analysis the chemical interaction between C–H, CO, and C–O chemical groups of LM, CH, and PAA. In addition, films showed high resistance to thermal decomposition between 125 and 425°C. The mechanical tests of tension allowed the composition of LM in the film, the behavior variates between a plastic and/or elastic material and with tensile strength (Rm) values between 10.8 and 16.4 MPa and elastic modulus (E) values between 56.2 and 169.2 GPa, we observed that at higher quantities of LM and thickness, both E and Rm tend to increase, while %EL decreases. This led us to conclude that the material transitioned from ductile and malleable to rigid and brittle. The films obtained with different ratios of LM/CH/PAA may exhibit a semi‐interpenetrating polymeric networking type morphology.\u0000Thermal and mechanical properties are of interest in food packaging materials.\u0000Water absorption can impact the packaged food.\u0000Films can be processed on existing machines for conventional plastics.\u0000Some conventional plastics could be replaced by these biodegradable films.\u0000Biodegradable films are of great interest to the industry of food packaging.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"5 10","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140654879","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Investigation of anisotropic shrinkage in liquid silicone rubber injection molding: Process variables","authors":"Matthew R. Bont, Stephen Johnston","doi":"10.1002/pen.26756","DOIUrl":"https://doi.org/10.1002/pen.26756","url":null,"abstract":"Injection molded liquid silicone rubber (LSR) devices are used in high performance applications for the medical, transportation, and energy industries. Anisotropic shrinkage in LSR injection molding has been observed in practice but is generally not well understood. This research focused on anisotropic shrinkage based on flow and cross‐flow orientation. LSR parts were molded at varying thicknesses, shear rates, fill times, and cure temperatures. Simulations accurately predicted the fill pattern and were used to predict the cure rate of the samples. LSR molding showed a significant range of linear shrinkage ratios between the flow versus crossflow directions shrinkage from above 1.30 to below 0.92. The underlying driver of anisotropic behavior is believed to be reaching a sufficient average cure through the cross section combined with flow‐induced orientation. Shrinkage anisotropy was found to generally increase with increasing shear rate in regions where curing was significant. Additionally, dynamic mechanical analysis showed a connection between the polymer network using the modulus and anisotropic linear shrinkage.\u0000Liquid silicone rubber injection molding experienced anisotropic shrinkage.\u0000Shrinkage was greater in the flow direction than in the crossflow direction.\u0000Shear flow caused orientation and strain of silicone polymer chains in cavity.\u0000Reaching cure threshold during flow caused increased shrinkage anisotropy.\u0000Shrinkage anisotropic showed due to network structure with anisotropic moduli.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"57 19","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140656418","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Investigation of physical, thermal, mechanical and gas permeability properties of low‐density polyethylene/ poly(4‐methyl‐1‐pentene) blend films and their utilization for fresh‐cut fruit and vegetable packaging applications","authors":"Tolga Gokkurt, Yasemen Gokkurt","doi":"10.1002/pen.26758","DOIUrl":"https://doi.org/10.1002/pen.26758","url":null,"abstract":"In this study, low density polyethylene/poly(4‐methyl‐1‐pentene) (LDPE/PMP) blend films were prepared by melt compounding in a twin‐screw extruder then film casting in a single screw extruder equipped with a cast‐film. Morphological, thermal, and mechanical properties of flexible blend films were characterized by XRD, SEM, DSC analysis, and tensile tests. Solid‐state viscoelastic properties of samples were also quantified by measuring creep behaviors in DMA. Oxygen and carbon dioxide permeability values of films were measured. Their packaging film application performances were evaluated by observing the textural properties of fresh‐cut bananas stored into LDPE and a blend film bag and monitoring the ethylene, oxygen, carbon dioxide concentrations into the bags for 14 days. It was found that LDPE/PMP blends showed partially miscible structure but yielded highly transparent films. DSC results pointed out that the PMP significantly reduced the degree of crystallinity value of LDPE. On the other hand, PMP improved tensile strength and elastic modulus of LDPE. Creep tests indicated that the PMP addition significantly reduced the creep resistance and relaxation time of LDPE. This study clearly signified that the PMP dramatically increased the oxygen permeability value of LDPE. It has also been concluded that LDPE/PMP blend films can be used as a highly permeable packaging material for successfully extending the shelf life of fresh‐cut fruits and vegetables.\u0000LDPE/PMP films, despite being partially miscible, are highly transparent and made through melt compounding and film casting.\u0000Adding PMP to LDPE reduces crystallinity but improves tensile strength and elasticity, as shown by DSC tests.\u0000PMP reduces LDPE's creep resistance and quickens relaxation time, according to DMA creep tests.\u0000PMP greatly increases LDPE's oxygen permeability, ideal for gas‐transmitting packaging.\u0000LDPE/PMP film packaging prolongs the shelf life of fresh produce, proven in a banana storage study.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"4 12","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140654128","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}