Imene Ezzeddine, M. Ilsouk, Mourad Arous, S. Atlas, M. Lahcini, M. Raihane
{"title":"Molecular dynamics of poly(ε‐caprolactone)/beidellite organoclay bionanocomposites obtained by in‐situ polymerization highlighted by dielectric relaxation spectroscopy","authors":"Imene Ezzeddine, M. Ilsouk, Mourad Arous, S. Atlas, M. Lahcini, M. Raihane","doi":"10.1002/pen.26810","DOIUrl":"https://doi.org/10.1002/pen.26810","url":null,"abstract":"Nanocomposites of poly(ε‐caprolactone) (PCL) reinforced by an organomodified beidellite (BDT) with 3% of cetyltrimethylammonium bromide (CTAB) (labeled PCL/3CTA‐BDT) were prepared by varying the content of filler (1, 2, 3, and 5 wt%). Their molecular dynamics were investigated by broadband dielectric spectroscopy at temperatures ranging from 0 to 40°C and a frequency window from 10−1 to 106 Hz. Three relaxation processes were detected for unfilled PCL: electrode polarization (EP), the Maxwell–Wagner–Sillars (MWS) polarization, and the α‐relaxation. The incorporation of the filler induced the emergence of a fourth process at high frequency of dipolar origin labeled as interfacial polarization (IP). Fitting the data with the Havriliak–Negami model as well as a study of the relaxation time variation with temperature demonstrated the noncooperative nature of the IP process. Activation energy and dielectric strength values demonstrated that the PCL/3CTA‐BDT with 3 wt% of filler showed a higher quality of dispersion and better interfacial features compared to those with other filler contents (2 and 5 wt%). This work highlights the challenges of dielectric green nanocomposites used for capacitors (storage energy) and cable/wire insulation.\u0000The various samples were analyzed using broadband dielectric spectroscopy.\u0000Relaxation processes in pure matrix: EP, MWS, and α‐relaxation.\u0000Incorporation of the filler induced the emergence of interfacial polarization (IP).\u0000Noncooperative behavior of the IP process.\u00003 wt% loading showed a higher quality of dispersion and interfacial features.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":" 20","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141374069","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Development of pH response film based on potato starch/polyvinyl alcohol using Kyoho grape skin extract to monitor pork freshness","authors":"Shihui Wang, Biao Zhao, Yanling Hao, Qixiang He","doi":"10.1002/pen.26744","DOIUrl":"https://doi.org/10.1002/pen.26744","url":null,"abstract":"In this study, the optimal ratio of starch and polyvinyl alcohol (PVA) was successfully selected by response surface method. The novel packaging films were fabricated by immobilizing Kyoho skin extract (KSE) within starch/PVA composite film by the casting method. The mechanical property, PH sensitivity, and other properties of films with different KSE content (1–5 mL) were studied. The starch/PVA film with 3 mL KSE (SPK3.0 film) showed more uniform structure than the starch/PVA film in microscope. At the same time, the film has strong mechanical properties and low water barrier capacity. Infrared analysis of the film further revealed hydrogen bond interaction between film matrix and KSE. The smart packaging film displayed distinguishable changes of color from purple to green in pH (1–13). Furthermore, the smart films possessed excellent antioxidant. Therefore, the SPK films had the potential application potential in the field of packaging.\u0000Barrier properties and antioxidant activity were enhanced significantly by the addition of KSE.\u0000The film components are connected by hydrogen bonds so that they have good compatibility.\u0000The functional film shows different colors in the range of pH 1–13.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"19 s28","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141377951","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Stretchable, stabilized‐conductive XNBR/PEDOT:PSS composites based on bottom‐deposited structure","authors":"Tianle Gu, Wei Liu, Xinghuo Wang, Xiaoqing Chen, Zi‐Jun Cao, Yukun Chen","doi":"10.1002/pen.26809","DOIUrl":"https://doi.org/10.1002/pen.26809","url":null,"abstract":"Conductive composites have attracted much attention due to its high conductivity, stretchability, and sensitivity. However, designing conductive composites with relatively stable conductivity under 100% deformation using simple methods remains a challenge. In this work, we employ a simple and straightforward approach to prepare a poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) solution. Based on the conductivity‐optimized PEDOT:PSS (5.95 S/cm), it was combined with carboxylated acrylonitrile‐butadiene rubber latex (XNBRL) to make a flexible conductive material with a unique bottom‐deposited structure. The incorporation of PEDOT:PSS establishes an interconnected conductive network within the XNBR, enhancing both the tensile strength (from 0.31 to 1.24 MPa) and conductivity of the composites. Remarkably, even at 100% strain, the resistance change (ΔR/R0) in the composite remains minimal (<2), demonstrating its exceptional flexibility and high electrical conductivity while maintaining relatively stable resistance during cyclic stretching at 50% deformation. Moreover, the conductive composite can maintain good relative resistance stability under different tensile rates and different strains. This conductive XNBR/PEDOT:PSS composite has promising application prospects in medical devices, which require relatively stable and high conductivity over a relatively large deformation.\u0000A simple method to increase the electrical conductivity of aqueous PEDOT:PSS.\u0000Flexible conductive composite with a small change in ΔR/R0.\u0000Enables rigid PEDOT to be used in stretchable electronic devices.\u0000Construction of 3D conductive network and bottom deposition structure.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"63 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141382958","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Elastic constant ratio for fatigue evaluation on rubber isolators","authors":"R. K. Luo","doi":"10.1002/pen.26812","DOIUrl":"https://doi.org/10.1002/pen.26812","url":null,"abstract":"In this study, a new concept of the elastic constant ratio was introduced to derive an S‐N base function, which has removed the requirement of the shear modulus to be measured in previous work, allowing much wider applications in fatigue prediction with significant reduction in the costs involved in conducting experiments and acceleration of the design process in industries. In this approach, the damage parameter was the effective tensile stress verified for both positive and negative R ratios (the ratio between the minimum stress and the maximum stress). Existing work only provided a general description of the criterion without detailed explicit equations, which does not provide sufficient clarity to the reader and could lead to variable fatigue life predictions. Here, detailed equations are introduced on the calculation procedure to allow accurate results to be obtained for fatigue assessment. The applicability of the approach was validated using two industrial components, that is, the Metacone spring and the bush spring. The maximum values of the damage parameter corresponded to the same failure locations observed in the experiments. The suggested S‐N base function, correlated with different materials and failure cycles, could be applied in a fatigue design stage and failure analysis for rubber isolators.\u0000For the first time, an elastic constant ratio is introduced on different rubbers.\u0000There is no additional test required for the material constants to save cost.\u0000The approach is experimentally validated on two industrial isolators.\u0000Monitoring stiffness in tests cannot determine the crack initiation accurately.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"298 6","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141386525","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Molecular dynamics study of free volume coalescence around nonyl ethoxylate in polyethylene with vinyl acetate‐modified branches","authors":"Sajjad Kavyani, João B. P. Soares, Phillip Choi","doi":"10.1002/pen.26807","DOIUrl":"https://doi.org/10.1002/pen.26807","url":null,"abstract":"Polyethylene (PE) is susceptible to environmental stress cracking (ESC). In the presence of an amphiphilic compound and subjected to stress, ESC starts with cavitation followed by slow crack growth and ends with brittle fracture. In this study, we used molecular dynamics simulation to study how branch ends which were chemically modified with vinyl acetate groups affect free volume coalescence around an amphiphilic compound, nonyl ethoxylate (NE), dispersed in branched PE models. Branch ends modified with vinyl acetate significantly impact the free volume coalescence dynamics around NE. Compared with methyl branch ends, vinyl acetate branch ends show a much higher affinity, as quantified by the corresponding radial distribution functions, for the hydrophilic ethylene oxide‐segment of NE. However, this is not the case for the hydrophobic ethylene‐segment. Interestingly, vinyl acetate branch ends tend to reduce the power (amplitude) of the free volume size fluctuations around both the ethylene oxide‐ and ethylene‐segments. Indeed, the powers of the fluctuations with different PE branching characteristics decrease with increasing vinyl acetate concentration. We believe that free volume coalescence leads to cavitation and that vinyl acetate branches could inhibit cavitation, thereby crack propagation in PE. The power results seem to be consistent with the experimental observation that the addition of copolymer ethylene vinyl acetate to low‐density polyethylene improves the ESC resistance of the blend.\u0000Vinyl acetate branches reduce free volume coalescence activities.\u0000Vinyl acetate branches are attracted to the hydrophilic segment of NE.\u0000Cavitation likely starts from the free volume coalescence around NE.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"3 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141271756","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Haozhe Wang, Qian Xu, Xiaowei An, Chengliang Guo, Zhonglin Zhang, Xiaogang Hao, Xiao Du
{"title":"Pervaporation recovery of aniline using the degradable material poly(butylene adipate‐terephthalate): Experiment and molecular simulation","authors":"Haozhe Wang, Qian Xu, Xiaowei An, Chengliang Guo, Zhonglin Zhang, Xiaogang Hao, Xiao Du","doi":"10.1002/pen.26803","DOIUrl":"https://doi.org/10.1002/pen.26803","url":null,"abstract":"Pervaporation has been considered a promising technique in the recovery of organic matter in low concentrations. Developing new and efficient pervaporation membrane materials remains the main challenge. In this study, the biodegradable poly (butylene adipate‐terephthalate) (PBAT) membrane was used to recover aniline by pervaporation for the first time. The PBAT membrane showed a good pervaporation performance due to its unique affinity with aniline by the surface adsorption energy calculations. When the aniline concentration in the feed solution was 0.4 wt%, the separation factor of the PBAT membrane exceeded 80. Besides, the results showed that the flux rose with the aniline concentration increasing, which was because of the incremental free volume of PBAT membrane. Moreover, the H‐bond length between aniline and PBAT (1.947 Å) was shorter than that between water and PBAT (2.091 Å) according to the density functional theory (DFT) calculations, which could account for the low diffusion coefficient of aniline from the result of molecular dynamics (MD) simulations. In addition, PBAT membranes displayed excellent stability in pervaporation experiments of more than 80 h. It is anticipated that the PBAT membrane may have great potential in pervaporation recovery of valuable chemicals from dilute aqueous solutions.\u0000Biodegradable PBAT membrane was first used to recover aniline by pervaporation.\u0000Low diffusion coefficient of aniline was further explained combining MD and DFT.\u0000The PBAT membranes exhibited excellent performance for aniline recovery.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"31 11","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141107342","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Preparation and characterization of long‐chain branched PA6 by UV‐irradiation of included methacrylate monomers after extrusion","authors":"Chao Guo, Guang‐Jian He, Wei‐Tao Huang, Xiao‐Chun Yin, Xian‐Wu Cao, Sen Qin","doi":"10.1002/pen.26802","DOIUrl":"https://doi.org/10.1002/pen.26802","url":null,"abstract":"To improve melt strength and toughness of polyamide 6 (PA6), an on‐line UV radiation method is introduced into reaction extrusion to induce free radical reaction for efficient preparation of long‐chain branched PA6 materials. Trimethylolpropane triacrylate and glycidyl methacrylate are adopted as chain extenders to synergistically introduce long‐chain branches onto PA6 macromolecules. Gel permeation chromatography results show the increase of molecular weight of PA6, implying the successful graft of chain extenders onto molecular chains. Based on rheological measurement results, modified PA6 exhibits better melt strength than pure PA6 owing to a larger storage modulus. The elongation at break and impact strength of modified PA6 at T1G1 are about 5.3 and 2.2 times those of pure PA6, respectively, without sacrificing tensile strength. According to Fourier transform infrared spectroscopy results, we propose reaction mechanisms between trimethylolpropane triacrylate/glycidyl methacrylate and PA6 under on‐line UV radiation. This study offers a practical approach for the efficient preparation of long‐chain branched PA6, thereby broadening the potential applications of the material.\u0000An on‐line UV radiation method is introduced into reaction extrusion.\u0000The melt strength and toughness of polyamide 6 are realized simultaneously at low cost.\u0000The synergistic effect mechanism of trimethylolpropane triacrylate and glycidyl methacrylate is proposed.\u0000Provides a feasible way to efficiently prepare long‐chain branched polyamide 6.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"26 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141112889","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Pore structure evolution and adsorption behaviors of porous poly (vinyl alcohol) hydrogel prepared using Na2SO4 and CaCO3 as porogens","authors":"Lubing Xiang, Xi Yu, Aimin Xiang, Xiaoying Lu, Meng Zhang, Hongfu Zhou","doi":"10.1002/pen.26765","DOIUrl":"https://doi.org/10.1002/pen.26765","url":null,"abstract":"In this work, porous poly (vinyl alcohol) (PVA) hydrogels with different pore sizes were fabricated using inorganic non‐metallic porogens by an environmentally friendly method, providing a potential solution for the field of wastewater treatment. PVA hydrogels have gained much attention in the field of wastewater treatment due to their excellent adsorption performance and porous network structure. However, the employment of inorganic non‐metallic salts as porogens for PVA hydrogels has received limited attention so far. In this study, porous PVA hydrogels were prepared by freeze‐thawing and freeze‐drying with sodium sulfate (Na2SO4) and calcium carbonate (CaCO3) as porogens. PVA‐Na exhibited denser network structure with the concentration of Na2SO4 solution increased, and the tensile stress was enhanced by about 45 times. Meanwhile, the tensile stress of PVA‐Ca was improved significantly from 0.06 to 1.67 MPa, and the network structure became looser after adding CaCO3. Moreover, a comprehensive investigation was conducted on the adsorption performance of porous PVA hydrogel for Congo red (CR). Finally, five adsorption models were fitted to investigate the adsorption mechanism of porous PVA hydrogels, in which the maximum adsorption capacity of CR by PVA‐Na‐0.5 was predicted to be 215 mg/g by the Langmuir isothermal model fitting.\u0000The structure of PVA hydrogels was adjusted by Na2SO4 and CaCO3, respectively.\u0000The tensile stress of PVA‐Na with dense network structure increased 45 times.\u0000Compared to PVA‐FD, swelling equilibrium time of PVA‐Na reduced from 24 to 6 h.\u0000Equilibrium swelling rate of PVA‐Ca declined by half in comparison to PVA‐FD.\u0000Langmuir isothermal model predicted qmax of 215 mg/g for CR by PVA‐Na‐0.5.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"53 18","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141108541","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Phase behavior of rubber and supercritical CO2: Operating parameters and swelling characteristics","authors":"Xiang Li, Xiaoqing Deng, Jianxin Liu, Xiaolei Zhang","doi":"10.1002/pen.26763","DOIUrl":"https://doi.org/10.1002/pen.26763","url":null,"abstract":"This study aims to compare the difference in the swelling process between styrene butadiene rubber (SBR) and natural rubber (NR) in ScCO2. A high‐pressure visual stainless‐steel autoclave was used to carry out swelling measurements based on the sample dimensions. The swelling rates for both rubbers followed a first‐order kinetic model. The diffusion coefficient for CO2 was determined from the change in the swelling degree with time. The shrinking process for the expanded rubber obeyed a second‐order kinetic model. A 2‐level full factorial experimental design was employed to discuss the influence of variables on rubber swelling and CO2 diffusion. Temperature and pressure were found to have a great influence on the equilibrium swelling degree, swelling rate and diffusion coefficient. For both SBR and NR, the maximum equilibrium swelling degrees were observed at 120°C and 20 MPa, yielding values of 1.18 and 1.16, respectively. The maximum diffusion coefficient reached approximately 3 × 10−9 m2 s−1 for both types of rubber at 120°C and 8 MPa. The crosslink density failed to affect these three responses, but the volume of expansion and the shrinkage rate were found to significantly decrease and increase, respectively, with increasing crosslink density. The motion of polymer segments forced by ScCO2 led to rearrangement of the material structure, which governed the nature of swelling, expansion, and shrinkage. Due to a lower number of entanglements and a weak electrostatic interaction exists between CO2 and the π‐system, SBR can absorb more CO2 and easily restructure than NR under the same conditions, resulting in higher equilibrium swelling degree, larger expansion and faster shrinkage than NR.\u0000Swelling of nature rubber and styrene‐butadiene rubber in ScCO2 is compared.\u0000Swelling degree is positively correlated with temperature and pressure.\u0000Diffusion coefficient increases with temperature but decreases with pressure.\u0000Swelling degree varies with rubber type, while CO2 diffusion dose not.\u0000Crosslink density significantly affects expansion and shrinkage of rubber.\u0000","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"33 8","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141118802","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Zheng Gong, Yao Xiao, Biao Li, Yinggang Huang, Pengfei Diao, Chuansheng Wang, Wei Li
{"title":"Preparation of low‐rolling resistance natural rubber composites from pyrolysis carbon black by plasma treatment","authors":"Zheng Gong, Yao Xiao, Biao Li, Yinggang Huang, Pengfei Diao, Chuansheng Wang, Wei Li","doi":"10.1002/pen.26749","DOIUrl":"https://doi.org/10.1002/pen.26749","url":null,"abstract":"In this study, the surface of pyrolysis carbon black (CBp) is modified by integrating the ball milling process with plasma treatment. High‐energy mechanical ball milling enabled more uniform contact and sufficient reaction temperature for the silane coupling agent and CBp. In addition, the impact of plasma activated the ash and surface deposits of CBp, reducing its inertness. Herein, the filler dispersion grade, Payne effect, vulcanization characteristics, and mechanical and dynamic mechanical properties are investigated by considering modified CBp/natural rubber (NR) composites. The ball milling plasma process can reduce the polarity of CBp. Compared with untreated CBp/NR composites, the plasma‐treated SCA‐CBp/NR composites exhibited increased CBp dispersion grades, higher processing safety, better processing fluidity, and improved mechanical properties. The reduced Payne effect ensured more filler‐rubber network structure, resulting in a reduction in rolling resistance.The coupling agent and CBp are treated by low‐temperature plasma and ball milling.The process promotes the formation of the filler‐rubber network.The dispersion grade of composites increased by 26.29%.The tensile strength increased by 5.57%, and the rolling resistance decreased by 19.44%.","PeriodicalId":134997,"journal":{"name":"Polymer Engineering & Science","volume":"114 35","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141124144","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}