High Temperature Materials and Processes最新文献

{"title":"Effect of tool traverse speed on joint line remnant and mechanical properties of friction stir welded 2195-T8 Al–Li alloy joints","authors":"Qingsong Zhang, An Yan, Ke-bin Chen, F. Dong, Hongde Jia, Min Wang","doi":"10.1515/htmp-2022-0265","DOIUrl":"https://doi.org/10.1515/htmp-2022-0265","url":null,"abstract":"Abstract AA2195-T8 Al–Li alloy plates were welded by friction stir welding (FSW) at tool rotational speed of 1,000 rpm and tool traverse speeds (TS) of 100–400 mm·min−1 under three types of butting surface conditions, i.e., (1) without butting surface treatment, (2) butting surface milled, and (3) bead-on-plate welding. The effect of welding heat input and butting surface condition on joint line remnant (JLR) and mechanical properties of friction stir welded 2195-T8 Al–Li alloy was investigated comprehensively. In the stir zone of 2195-T8 FSW joints, there exists JLR composed of alumina-particle arrays and microcracks generated from the initial butting surface, and the morphology of JLR would evolve from smooth to serrate as TS increases. Moreover, as TS increases (i.e., the welding heat input decreases), JLR deteriorates the tensile strength of the 2195-T8 FSW joints, with joints prematurely fracturing along JLR. The fracture mode of 2195-T8 FSW joints was considered to be determined by the lower one between strength of JLR (S JLR) and strength of the lowest hardness zone (S LHZ), and JLR tends to be the fracture path at lower welding heat input. Furthermore, butting surface treatment (milling off oxide layer prior to welding) was found to be able to make the JLR in the 2195-T8 FSW joints less distinct and thus improve S JLR, while fracture along JLR could not be avoided.","PeriodicalId":12966,"journal":{"name":"High Temperature Materials and Processes","volume":" ","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43172922","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Numerical simulation of shrinkage porosity defect in billet continuous casting","authors":"Xingjuan Wang, Yi-Chen Guo, Pengcheng Xiao, Zengxun Liu, Liguang Zhu","doi":"10.1515/htmp-2022-0246","DOIUrl":"https://doi.org/10.1515/htmp-2022-0246","url":null,"abstract":"Abstract Shrinkage porosity is a typical internal defect in the continuous casting billet, which occurs frequently and is difficult to solve. To explore the influence factors of central shrinkage porosity, a novel unsteady thermomechanical coupling analysis algorithm is developed based on the billet solidification characteristics, and the central shrinkage behavior during the ending solidification process is simulated. Results show that when the casting speed increases from 1.6 to 2.8 m·min−1 and the center outward displacement is reduced from 9.20 × 10−2 mm to 5.8 × 10−2 mm, it means casting speed has a significant effect on the formation of shrinkage porosity, and for this caster, the higher casting speed is more suitable for the secondary cooling zone. Without the changes in the solidification structure, when the superheat degree of molten steel increases from 10 to 40°C, the center outward displacement value decreases from 7.12 × 10−2 mm to 6.91 × 10−2 mm. In that case, the superheat degree has no obvious effect on the center displacement value.","PeriodicalId":12966,"journal":{"name":"High Temperature Materials and Processes","volume":" ","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46517205","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Preparation of CaO–SiO2–Al2O3 inorganic fibers from melting-separated red mud","authors":"Peipei Du, Yuzhu Zhang, Yue Long, Lei Xing","doi":"10.1515/htmp-2022-0272","DOIUrl":"https://doi.org/10.1515/htmp-2022-0272","url":null,"abstract":"Abstract To investigate the feasibility of preparing CaO–SiO2–Al2O3 inorganic fibers with melting-separated red mud, the properties of the melting-separated red mud were analyzed by X-ray fluorescence, X-ray diffraction, and differential thermal-thermogravimetric analyses. The composition of the melting-separated red mud satisfied the requirements for the composition of inorganic fibers. During the melting of the melting-separated red mud, tetrahedral skeleton fracture reactions occurred at 1,234°C, anionic group reverse binding occurred at 1,250°C, and there was no other obvious reaction peak during the whole melting process, which lasted for 51 min. The minimum suitable fiber forming temperature of the melting-separated red mud melt was 1,433°C, which was 83°C greater than its crystallization temperature, 1,350°C. Within this temperature range, the activation energy of particle movement in the melt was 1008.65 kJ·mol−1, and the melt exhibited good fluidity. Considering the temperature distribution corresponding to the melting properties of the melting-separated red mud, CaO–SiO2–Al2O3 inorganic fibers could be prepared when the melting-separated red mud was subjected to component reconstruction by increasing the silicon content, reducing the aluminum content, and adding a moderate amount of calcium. Quartz sand and light burnt dolomite were used as modifying agents and inorganic fibers were prepared under laboratory conditions. The fibers prepared from the modified melting-separated red mud by adding different amounts of melting-separated red mud had smooth surfaces and were arranged in a crossed manner at the macroscopic level. Their color was grayish-white, and small quantities of slag balls were doped inside the fibers. With an increase in the amount of melting-separated red mud from 50 to 100%, the average fiber diameter increased from 5.5 to 8.0 μm, and their slag ball content increased from 2.9 to 6.0%. Overall, under laboratory conditions, when the amount of melting-separated red mud added was 50%, dolomite was 22.5% and quartz sand was 27.5%, the performance of the fiber was the best.","PeriodicalId":12966,"journal":{"name":"High Temperature Materials and Processes","volume":" ","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49207081","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Effect of cold-rolling deformation and rare earth yttrium on microstructure and texture of oriented silicon steel","authors":"Zhihong Guo, Pengjun Liu, Yaxu Zheng, Liguang Zhu, Yuanxiang Zhang, Hui-lan Sun, Xiangyang Li, Yu Liu, Ruifang Cao","doi":"10.1515/htmp-2022-0258","DOIUrl":"https://doi.org/10.1515/htmp-2022-0258","url":null,"abstract":"Abstract In order to study the effect of cold-rolling deformation and rare earth Y on the microstructure and texture of 3.0% Si-oriented silicon steel, the microstructure and texture of cold-rolled oriented silicon steel with 60, 72, and 86% deformation are analyzed using electron backscatter diffraction and image analysis software. The experimental results show that the deformation band becomes narrower and the distribution of shear bands becomes denser with increasing cold-rolling deformation. Compared to the Y-free steel, cold-rolled sheet containing rare earth Y has greater shear bands. The pinning effect of rare earth Y hinders the dislocation movement, which leads to the increase of kernel average misorientation value and shear bands. With the increase of cold-rolling deformation, the texture concentrates on α and λ. This is mainly due to the change from {100} 〈001〉 to {001} 〈110〉, intensifying λ texture, and the change from {111} 〈112〉 to {111} 〈110〉, thus strengthening the α texture. The texture strength of cold-rolled sheets can be decreased by rare earth Y. But the γ texture strength in cold-rolled sheets containing Y is significantly higher than in those without Y. The γ texture strength can reach up to 7.3, and the strong points are mainly {111} 〈112〉. This is because the number of inclusions in steel increases with the addition of rare earth Y. In the process of grain nucleation, the {111} oriented grains nucleate heterogeneously on the inclusions. It forms a large number of {111} oriented grains and improves the γ texture strength.","PeriodicalId":12966,"journal":{"name":"High Temperature Materials and Processes","volume":" ","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42071884","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"A novel method for CO2 injection direct smelting vanadium steel: Dephosphorization and vanadium retention","authors":"Han Yang, Yang Liu, Kun Wang, Ting’an Zhang, Shengnan Lin","doi":"10.1515/htmp-2022-0281","DOIUrl":"https://doi.org/10.1515/htmp-2022-0281","url":null,"abstract":"Abstract A novel method for CO2 injection direct smelting vanadium steel (CIDSVS) is proposed. Achieving selective oxidation of phosphorus is essential for the applicability of the suggested process. Under the guidance of thermodynamics, the mechanisms of CO2 injection dephosphorization and vanadium retention were investigated with CO2 flow rate and dephosphorization slag composition as experimental variables. The results indicate that CO2 as an oxygen source can remove 73.8% of phosphorus, while the oxidation rate of vanadium is 17.5%. The dephosphorization process can be divided into two stages: FeO- and CO2-dominated experimental processes. In the initial stage of slag feeding, [V] and [P] undergo fast oxidation, and the oxidation amount is positively correlated with the initial FeO content. The high basicity (CaO/SiO2 ratio) reduces the activity of V2O3 in the slag and promotes the oxidation of [V]. Under the experimental conditions of 1,400°C, the optimal conditions were determined to be a CO2 flow rate of 1.5 mL·g−1·min−1, a FeO content of 40%, and a basicity B of 2.5. Following the CIDSVS steelmaking operation, 80% of the vanadium is retained, and the impurity elements fulfill the specifications for steel. This method enhances vanadium utilization and is environmentally friendly.","PeriodicalId":12966,"journal":{"name":"High Temperature Materials and Processes","volume":" ","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45842740","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Mechanical properties and nugget evolution in resistance spot welding of Zn–Al–Mg galvanized DC51D steel","authors":"Linlin Zhao, Yuechuan Lu, Ziliu Xiong, Li Sun, J. Qi, X. Yuan, J. Peng","doi":"10.1515/htmp-2022-0243","DOIUrl":"https://doi.org/10.1515/htmp-2022-0243","url":null,"abstract":"Abstract Zn–Al–Mg coating galvanized steel in resistance spot welded (RSW) in different configurations of DC51D was investigated to illustrate the nugget evolution process and mechanical properties of the joints. Results show that the microstructure of welded joints can be divided into nugget zone (FZ), heat-affected zone (HAZ), and base metal zone (BM). FZ was composed of lath martensite. The average hardness value of the weld joint was 110 HV0.2 while the FZ was up to 300 HV0.2 due to the formation of lath martensite. The failure modes can be divided into interface fracture (IF) and pull-out fracture occurred (PF) under different welding parameters, in which shear dimples showed had a typical plastic fracture morphology. The best range for welding parameters was found to be 12–18 cycles in which the nugget diameter reached 5.5 mm. The process of nugget evolution in HAZ and FZ was discussed.","PeriodicalId":12966,"journal":{"name":"High Temperature Materials and Processes","volume":" ","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47359426","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Effect of high temperature tempering on the phase composition and structure of steelmaking slag","authors":"Shuai Hao, G. Luo, Yingxue Chen, Yifan Chai, Shengli An, W. Song","doi":"10.1515/htmp-2022-0264","DOIUrl":"https://doi.org/10.1515/htmp-2022-0264","url":null,"abstract":"Abstract Blast furnace slag and steelmaking slag, as the main accessory products of iron and steel smelting, are piled up in large quantities due to their huge output, high treatment difficulty and low comprehensive utilization rate, which has a serious impact on the land and environment. In order to improve the comprehensive utilization of steelmaking slag, low basicity blast furnace slag was added to the existing steel slag for quenching and tempering. The influence of basicity on the chemical composition and phase precipitation of mixed slag was analyzed. In the research process, the phase composition and morphology of blast furnace slag and steel slag of Baotou Steel were analyzed using FactSage7.1 thermodynamic calculation software, ZEISS high-resolution scanning electron microscope (SEM), modern fast high-resolution Bruker energy dispersive spectrometer and AMICS-Mining automatic mineral analysis software. The results show that the mineral phase composition of blast furnace slag is mainly calcium aluminum yellow feldspar and that of steelmaking slag is mainly dicalcium silicate(C2S), magnesium-iron phase solid solution, rose pyroxene and calcium iron aluminate. When the basicity of the mixed slag is 2.0, it can effectively inhibit the formation of non-cementitious mineral anorthite and promote the formation of better cementitious mineral C2S. At the same time, it is found that the melting temperature of mixed slag decreases with the increase in Al2O3 content.","PeriodicalId":12966,"journal":{"name":"High Temperature Materials and Processes","volume":" ","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45715452","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Al–Si–Fe alloy-based phase change material for high-temperature thermal energy storage","authors":"Yuto Shimizu, Takahiro Nomura","doi":"10.1515/htmp-2022-0280","DOIUrl":"https://doi.org/10.1515/htmp-2022-0280","url":null,"abstract":"Abstract Carnot batteries, a type of power-to-heat-to-power energy storage, are in high demand as they can provide a stable supply of renewable energy. Latent heat storage (LHS) using alloy-based phase change materials (PCMs), which have high heat storage density and thermal conductivity, is a promising method. However, LHS requires the development of a PCM with a melting point suitable for its application. For the Carnot battery, the reuse of a conventional ultra-supercritical coal-fired power plant with a maximum operating temperature of approximately 650°C is considered. Therefore, developing a 600°C-class alloy-based PCM is crucial for realizing a highly efficient and environmentally friendly Carnot battery. Using thermodynamic calculation software (FactSage), we found that Al-5.9 mass% Si-1.6 mass% Fe undergoes a phase transformation at 576–619°C, a potential 600°C-class PCM. In this study, we investigated the practicality of an Al–Si–Fe PCM as an LHS material based on its heat storage and release properties and form stability. The examined Al–Si–Fe PCM melted until approximately 620°C with a latent heat capacity of 375–394 J·g−1. Furthermore, the PCM was found to have a thermal conductivity of approximately 160 W·m−1·K−1 in the temperature range of 100–500°C, which is significantly better than that of conventional sensible heat storage materials in terms of heat storage capacity and thermal conductivity.","PeriodicalId":12966,"journal":{"name":"High Temperature Materials and Processes","volume":" ","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41346302","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Evaluating thermal properties and activation energy of phthalonitrile using sulfur-containing curing agents","authors":"Joon Hyuk Lee, Eunkyung Jeon, Jung-kun Song, Yujin Son, Jaeho Choi","doi":"10.1515/htmp-2022-0289","DOIUrl":"https://doi.org/10.1515/htmp-2022-0289","url":null,"abstract":"Abstract This work used the Kissinger equation to compute the activation energy of phthalonitrile to observe thermal properties. We initiated our investigation by synthesizing phthalonitrile samples, incorporating sulfur-containing curing agents ranging from 2 to 10%. Energy-dispersive X-ray spectroscopy confirmed the success of the curing process. Subsequently, we used thermogravimetric analysis (TGA) to acquire the necessary dataset for input into the Kissinger equation. The TGA results pointed to a direct relationship between the concentration of the curing agent and the thermal stability of the samples. Specifically, a sample treated with a 2% sulfur-containing curing agent demonstrated a moderate thermal stability (Td5%: 527.11°C). However, samples treated with higher concentrations of the curing agent, namely, 5 and 10%, exhibited increased Td5% values of 532.75 and 540.01°C, respectively. The increased thermal degradation-onset temperatures suggest a boost in the cross-linking density and mechanical properties, a result of the increased curing agent concentration. Further substantiating these findings, the Kissinger equation yielded high activation energies of 43.6222, 46.1365, and 67.9515 kcal·mol −1 for the 2, 5, and 10% curing agent dosages, respectively, with R ² values ranging from 0.9650 to 0.9701.","PeriodicalId":12966,"journal":{"name":"High Temperature Materials and Processes","volume":"273 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135599801","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Short-pulsed arc discharge for generation of cold plasma jet (apokamp) and prospects of its application in biomedicine","authors":"D. Schitz, V. Panarin, V. Skakun, Dmitry Pechenitsin","doi":"10.1615/hightempmatproc.2023046778","DOIUrl":"https://doi.org/10.1615/hightempmatproc.2023046778","url":null,"abstract":"","PeriodicalId":12966,"journal":{"name":"High Temperature Materials and Processes","volume":"13 1","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"78678879","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}