{"title":"DC Motor Speed Control Based on Fuzzy Adaptive with Fuzzy Model Reference Learning Control (FMRLC) Algorithm","authors":"Masjudin, Alimuddin, S. Aisah, R. Wiryadinata","doi":"10.1109/ICIEE49813.2020.9276771","DOIUrl":"https://doi.org/10.1109/ICIEE49813.2020.9276771","url":null,"abstract":"Fuzzy Model Reference Learning Control (FMRLC) is a control technique developed by extending several self-organizing linguistic control concepts and utilizing ideas from the conventional Model Reference Adaptive Control (MRAC) method. FMRLC in this study is used to control the speed of a DC motor. FMRLC testing is performed on the step response, set point with a constant value, tracking setpoint, and torque load. The test results show the adaptive fuzzy control system with the FMRLC algorithm to control a DC motor’s rotation speed can be well designed, proven by simulating the FMRLC control system using MATLAB. The performance of the FMRLC control system that has a design to control the rotation speed of a DC motor at a set point of 3000 rpm without load includes: delay time = 0.0681 seconds, rise time = 0.2279 seconds, setting time = 0.3863 seconds. For DC motors at 3000 rpm, setpoint load ½ torque raises a steady-state error of 0.0207%, with a max torque load resulting in a steady-state error of 0.0413% and when given a load of 2x maximum torque produces a steady-state error of 0.0818%, with each of the following sequential recovery times 0.6457 seconds 0.7939 seconds and 0.7532 seconds.","PeriodicalId":127106,"journal":{"name":"2020 2nd International Conference on Industrial Electrical and Electronics (ICIEE)","volume":"46 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131572670","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Fadil Muhammad, Dzulfiqar Dwi Yanto, W. Martiningsih, Vembi Noverli, R. Wiryadinata
{"title":"Design of Automatic Headlight System Based on Road Contour and Beam from Other Headlights","authors":"Fadil Muhammad, Dzulfiqar Dwi Yanto, W. Martiningsih, Vembi Noverli, R. Wiryadinata","doi":"10.1109/ICIEE49813.2020.9276906","DOIUrl":"https://doi.org/10.1109/ICIEE49813.2020.9276906","url":null,"abstract":"Accidents often occur at night due to a lack of light. With the low-light conditions, a lot of drivers who use high beam headlight forgot to switch to low beam headlight. That action can cause temporary blindness to the driver in front of him because of the glare. Automatic Headlight can change the mode of lights and reflector lights when passing move uphill or downhill roads using the accelerometer sensor MPU6050. The automatic headlight can also change the mode of light based on the light in front of him using the BH1750 lux meter sensor so that the path illuminated by the headlight to be quite and do not endanger other drivers. Laboratory testing has a success rate of 97%, with 260 trials in 13 conditions. And on real testing, the automatic headlight can switch modes automatically when going uphill and downhill. The headlight can change modes automatically when passing through roads with adequate lighting or when passing other vehicles.","PeriodicalId":127106,"journal":{"name":"2020 2nd International Conference on Industrial Electrical and Electronics (ICIEE)","volume":"9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123933216","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
P. C. Rahayu, Kornelius Feki Abednego, R. V. Silalahi
{"title":"Evaluation of Implementation of The Use of Enterprise Resource Planning System In Service Company","authors":"P. C. Rahayu, Kornelius Feki Abednego, R. V. Silalahi","doi":"10.1109/ICIEE49813.2020.9276505","DOIUrl":"https://doi.org/10.1109/ICIEE49813.2020.9276505","url":null,"abstract":"Periodic evaluations are useful for maintaining and providing feedback for the good of the company. In this study an evaluation of the enterprise resource planning (ERP) system will be used for service companies to determine whether the ERP system has been running well as desired. Therefore, an interview was conducted with IT Development and a questionnaire was distributed to users. The results of the questionnaire were processed using the importance performance analysis method and the problematic indicators were language and security. These dimensions are processed by the fault tree analysis method to find the cause of the problem that can occur. The results of the analysis were discussed with IT Development and the results of the discussion obtained suggestions for improvement in the security section by shortening the automatic logout time on the system, providing initial passwords at random and imposing sanctions for users who give passwords to others which ultimately harm the company. Whereas for the language section, suggestions are given in the form of a portal that is connected to the system where the language used in the portal is more easily understood by users and improves communication with users so that all information that is given is conveyed well to the user.","PeriodicalId":127106,"journal":{"name":"2020 2nd International Conference on Industrial Electrical and Electronics (ICIEE)","volume":"36 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116284005","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
S. Alam, L. Sari, I. Surjati, Rakesh, Y. K. Ningsih, Newton Onasie
{"title":"Size Reduction of Multiple Feed Line Microstrip Antenna Using Peripheral Slit Technique","authors":"S. Alam, L. Sari, I. Surjati, Rakesh, Y. K. Ningsih, Newton Onasie","doi":"10.1109/ICIEE49813.2020.9277447","DOIUrl":"https://doi.org/10.1109/ICIEE49813.2020.9277447","url":null,"abstract":"Miniaturization and size reduction of multiple feed-line microstrip antenna has been investigated and described in this paper. The dimension of proposed antenna reduced using 3 pair of slit while the resonant frequency of 1800 MHz. Based on simulation and optimization result using EM Simulation, the dimension of proposed antenna can reduced until 94.81% compared with conventional multiple feed line microstrip antenna. This result shows that peripheral slit technique succeeded in reducing the dimension of proposed antenna without change the working frequency of antenna.","PeriodicalId":127106,"journal":{"name":"2020 2nd International Conference on Industrial Electrical and Electronics (ICIEE)","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124979893","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
S. Praptodiyono, Moh. Jauhari, R. Fahrizal, I. Hasbullah, A. Osman, Shafiq Ul Rehman
{"title":"Integration of Firewall and IDS on Securing Mobile IPv6","authors":"S. Praptodiyono, Moh. Jauhari, R. Fahrizal, I. Hasbullah, A. Osman, Shafiq Ul Rehman","doi":"10.1109/ICIEE49813.2020.9277354","DOIUrl":"https://doi.org/10.1109/ICIEE49813.2020.9277354","url":null,"abstract":"The number of Mobile device users in the word has evolved rapidly. Many internet users currently want to connect the internet for all utilities automatically. One of the technologies in the IPv6 network, which supports data access from moving users, is IPv6 Mobile protocol. In its mobility, the users on a range of networks can move the range to another network. High demand for this technology will interest to a hacker or a cracker to carry out an attack. One of them is a DoS attack that compromises a target to denial its services. A firewall is usually used to protect networks from external attacks. However, since the firewall based on the attacker database, the unknown may not be detected. In order to address the obstacle, a detection tool could be used. In this research, IDS as an intrusion detection tool was integrated with a firewall to be implemented in IPv6 Mobile to stop the DoS attack. The results of some experiments showed that the integration system could block the attack at 0.9 s in Correspondent Node and 1.2 s in Home Agent. The blocked attack can decrease the network throughput up to 27.44% when a Mobile Node in Home Agent, 28,87% when the Mobile Node in a Foreign Network. The final result of the blocked attack is reducing the average CPU utilization up to 30.99%.","PeriodicalId":127106,"journal":{"name":"2020 2nd International Conference on Industrial Electrical and Electronics (ICIEE)","volume":"64 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123468327","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Shafiq Ul Rehman, Parminder Singh, S. Manickam, S. Praptodiyono
{"title":"Towards Sustainable IoT Ecosystem","authors":"Shafiq Ul Rehman, Parminder Singh, S. Manickam, S. Praptodiyono","doi":"10.1109/ICIEE49813.2020.9277090","DOIUrl":"https://doi.org/10.1109/ICIEE49813.2020.9277090","url":null,"abstract":"As the world is moving towards industry 4.0, it is estimated that in the near future billions of IoT devices will be interconnected over the Internet. The open and heterogeneous nature of IoT environment makes it vulnerable to adversarial attacks. To maintain sustainability in IoT ecosystem, this paper evaluates some of the recent IoT schemes based on key security features i.e. authentication, confidentiality, trust etc. These schemes are classified according to three-layer IoT architecture. Based on our findings, some of these solutions are applicable at physical layer while others are at network, and application layers. However, none of these schemes can provide end-to-end solution for IoT environment. Therefore, our work provides a roadmap for future research directions in IoT domain to design robust security schemes for IoT environment, thus can achieve sustainability in IoT ecosystem.","PeriodicalId":127106,"journal":{"name":"2020 2nd International Conference on Industrial Electrical and Electronics (ICIEE)","volume":"34 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130591486","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Muhammad Ifan Saputra, S. R. Sulistiyanti, S. Purwiyanti, U. Murdika
{"title":"Design of Prototype Measuring Motor Vehicles Velocity Using Hall Effect Sensor Series A-1302 based On Arduino Mega2560","authors":"Muhammad Ifan Saputra, S. R. Sulistiyanti, S. Purwiyanti, U. Murdika","doi":"10.1109/ICIEE49813.2020.9277046","DOIUrl":"https://doi.org/10.1109/ICIEE49813.2020.9277046","url":null,"abstract":"This system is designed to get vehicle speed information on the highway. Because the speed of a vehicle on the highway is very influential on other road users. Even based on data taken by the National Police Traffic Corps, speed on vehicles is one of the five violations that are often committed by vehicle users. From this, the authors tried to develop a speed measurement system with the Hall Effect Sensor. The method used in this system is to place two Hall Effect sensors with a certain distance connected to the Arduino Mega2560. When the vehicle passes the first sensor, the timer will start and when the vehicle passes the second sensor, the timer will stop. The results of the construction between the travel time of the vehicle and the distance from the two sensors are what states the speed of a vehicle and will be displayed on the Liquid Crystal Display (LCD) and stored automatically on the SD Card.","PeriodicalId":127106,"journal":{"name":"2020 2nd International Conference on Industrial Electrical and Electronics (ICIEE)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115019733","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
R. Wiryadinata, Citra Nurizati, A. S. Pramudyo, I. Saraswati, Sabah Benzeghda
{"title":"Data Transmission and Storage of Local Meteorology Station in Hybrid Power Plant System (Photovoltaic and Wind Turbine)","authors":"R. Wiryadinata, Citra Nurizati, A. S. Pramudyo, I. Saraswati, Sabah Benzeghda","doi":"10.1109/ICIEE49813.2020.9277316","DOIUrl":"https://doi.org/10.1109/ICIEE49813.2020.9277316","url":null,"abstract":"In sensor data monitoring system requires a fast data storage system with a high level of availability. In this research, a hybrid and power generation system (photovoltaic and wind turbine) and a weather condition monitoring station are designed to determine the power generated by the plant and data on several parameters of local weather conditions using 3 different types of sending and storage media to enable data backup. There are 12 sensors used in the design, namely the voltage and current sensors which are placed on the hybrid generating system and the weather sensor namely the tipping bucket, AM2320, BMP 180, cup type anemometer, and wind direction. Uses the IoT (Internet of Things) network that can be accessed online and in real time wherever and whenever you are connected to the internet. Plus wireless system using radio frequency emissions consisting of a transmitter and receiver with a wide range. Minimize loss of monitoring data, then added using MMC (Multi Media Card) storage media that can record measurement data directly. Tests that have been carried out in sending and storing data have a success rate of 94.35%.","PeriodicalId":127106,"journal":{"name":"2020 2nd International Conference on Industrial Electrical and Electronics (ICIEE)","volume":"224 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133945324","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"ICIEE 2020 TOC","authors":"","doi":"10.1109/iciee49813.2020.9276880","DOIUrl":"https://doi.org/10.1109/iciee49813.2020.9276880","url":null,"abstract":"","PeriodicalId":127106,"journal":{"name":"2020 2nd International Conference on Industrial Electrical and Electronics (ICIEE)","volume":"122 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124182832","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}