The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011最新文献
C. Upathamkuekool, A. Jiraseree-amornkun, J. Mahattanakul
{"title":"Ultra low-power low-voltage active-RC filter with on-chip automatic tuning","authors":"C. Upathamkuekool, A. Jiraseree-amornkun, J. Mahattanakul","doi":"10.1109/ECTICON.2011.5947777","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5947777","url":null,"abstract":"An ultra low-power low-voltage active-RC filter design with on-chip automatic tuning system is presented. It is based on the compensation method for compact low-gain amplifier and can be operated at supply voltages down to 0.5 V. Charge pump phase-locked loop technique has been adopted for automatic tuning system. A fifth-order Chebyshev low-pass filters with cut-off frequency tunable from 2 MHz to 10 MHz was designed using a 0.18-µm CMOS process with standard threshold voltage. The output signal-to-in-band integrated noise ratio (SNR) is around 42 dB and the spurious-free dynamic range (SFDR) about −42 dBc is also obtained. The filter consumes only 60.9µW with 10 MHz bandwidth.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"33 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116151007","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
T. Sakanushi, K. Yamada, I. Murakami, Jie Hu, S. Matsuura
{"title":"A design method for robust stabilizing simple multi-period repetitive controllers for multiple-input/multiple-output plants","authors":"T. Sakanushi, K. Yamada, I. Murakami, Jie Hu, S. Matsuura","doi":"10.1109/ECTICON.2011.5947893","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5947893","url":null,"abstract":"The simple multi-period repetitive control system proposed by Yamada and Takenaga is a type of servomechanism for the periodic reference input. That is, the simple multi-period repetitive control system follows the periodic reference input with small steady state error, even if a periodic disturbance or uncertainty exists in the plant. In addition, simple multi-period repetitive control systems make transfer functions from the periodic reference input to the output and from the disturbance to the output have unite numbers of poles. Yamada et al. clarified the parameterization of all stabilizing simple multi-period repetitive controllers. Recently, the parameterization of all robust stabilizing simple multi-period repetitive controllers for the plant with uncertainty was clarified by Yamada et al. However, their method cannot be applied to multiple-input/multiple-output plants. In this paper, we propose the parameterization of all robust stabilizing simple multi-period repetitive controllers for multiple-input/multiple-output plants.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"83 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116231946","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Patharawut Saengsiri, P. Meesad, S. N. Wichian, Unger Herwig
{"title":"Classification models based-on incremental learning algorithm and feature selection on gene expression data","authors":"Patharawut Saengsiri, P. Meesad, S. N. Wichian, Unger Herwig","doi":"10.1109/ECTICON.2011.5947866","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5947866","url":null,"abstract":"Gene expression data is illustration levels of genes that DNA encode into the protein such as muscle or brain cells. However, some abnormal cells may evolve from unnatural expression levels. So, finding a subset of informative gene would be beneficial to biologists because it can help to identify discriminate genes. Unfortunately, genes grow rapidly up into the tens of thousands gene which make it difficult for classifying processes such as curse of dimensionality and misclassification problems. This paper proposes classification models based-on incremental learning algorithm and feature selection on gene expression data. Three feature selection methods: Correlation based Feature Selection (Cfs), Gain Ratio (GR), and Information Gain (Info) combined with Incremental Learning Algorithm based-on Mahalanobis Distance (ILM). Result of the experiment represented proposes models CfsILM, GRILM and InfoILM not only reduce many dimensions, save time-resource but also improve accuracy rate. Particularly, CfsILM was outstanding than other models on three public gene expression datasets.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"69 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116610335","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Multi-level parallelism, global arrays, GPGPU Programming: Unify programming paradigms on Grid computing with efficiency","authors":"S. Sirisup, E. Kijsipongse","doi":"10.1109/ECTICON.2011.5947873","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5947873","url":null,"abstract":"As technology advances, computing resources also gain benefits in many aspects: larger capacity, increased capability as well as rapidity. However, with heterogeneously distributed resources in Grid computing environment, the development an application to fully utilize the resources is a challenge. Especially, the computing resources themselves regularly upgrade their computing power for example by recruiting General Purpose Graphics Processing Unit (GPGPU) resources. The challenge in developing an application on computing environment like that becomes even greater. In this paper, we propose an approach to unify the programming paradigms in Grid computing and GPGPU computing as well as further our investigation on the performance of an application developed on such environment. To maximize its efficiency, the grid application is developed based on multi-level parallelism together with multi-level topology-aware techniques and the Global Arrays toolkit. We have successfully implemented the grid application with the proposed approach and the performance of the application depends directly on how the computing loads are distributed over those resources. The direct portability of a GPGPU application/module in order to be integrated into a comprehensive grid computing code is also observed in our approach.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"19 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125635346","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Simulation of three-phase grid connected parallel inverters with current error compensation control","authors":"E. Isen, A. Bakan","doi":"10.1109/ECTICON.2011.5947948","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5947948","url":null,"abstract":"Switching frequency of the inverter is increased in order to transfer high quality current to the grid. Increasing switching frequency decreases the efficiency of the power converter. In this paper, two inverters are connected in parallel to transfer high quality current to the grid. L filters are connected between inverters and the grid to filter current, thus simple control techniques can be used in these inverters. The first inverter operates as a main inverter, and the second one operates as an auxiliary inverter. The main inverter produces grid reference current, and the auxiliary inverter is utilized to compensate the main inverter current error. The main inverter has high power capacity, and operates at low switching frequency; on the other hand the auxiliary one has low power capacity, and operates at high switching frequency. The advantages of the proposed system are simple control technique and high efficiency. The proposed system and control scheme is simulated in MATLAB/Simulink for 10 kW. Simulation results shows that the two inverters connected in parallel can be controlled with the proposed control scheme and the THD value is limited to less than 5%.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"75 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122799395","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Suthin Khankhua, M. Ashraf, S. Tayyaba, N. Afzulpurkar, C. Punyasai
{"title":"Simulation of MEMS based micro-gyroscope using CoventorWare","authors":"Suthin Khankhua, M. Ashraf, S. Tayyaba, N. Afzulpurkar, C. Punyasai","doi":"10.1109/ECTICON.2011.5947760","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5947760","url":null,"abstract":"This paper presents the design and simulation of MEMS based micro-gyroscope to be used in digital camera for image stabilization. Simulation has been performed using CoventorWare. Proposed model of gyroscope has improved the performance and structure for small vibration amplitude to minimize the mechanical crosstalk. Results show that the capacitance in sense mode, which is detected by variable-gap capacitors, is equal to 2.68 pF in each side of sense mode. Oscillations in drive and sense electrodes with 1-DOF and proof mass with 2-DOF make sure that the proposed model has no common mode, that causes mechanical crosstalk. Damping effect for slide thin film and squeezed thin film has been studied. The presented data provides useful information to fabricate the optimal design of MEMS based micro gyroscope.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"23 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131557629","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Average transmit power reduction through power allocation for OFDM-based indoor wireless optical communications","authors":"Muhammad Farooqui, P. Saengudomlert","doi":"10.1109/ECTICON.2011.5947837","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5947837","url":null,"abstract":"This research investgates the physical layer aspect of power allocation in orthogonal frequency division multiplexing (OFDM) based indoor wireless optical communication (WOC) systems with intensity modulation and direct detection (IM/DD). The main objective is to reduce the average transmit optical power subject to a constraint on the bit error rate (BER). Based on the channel gain information, the considered approach is to use only the better half of the OFDM subcarriers while doubling the signal constellation sizes on those subcarriers. Simulation results indicate that the transmit power reduction can be significant, especially when the transmission bit rate reaches the order of 100 Mbps. In particular, about 8–10 dB of power reduction is observed for a 100-Mbps system operating with the BER requirement of at most 10−4.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"57 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128081765","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Bandpass transmission characteristics of multimode fibers using Gaussian distribution","authors":"Wassana Naku, C. Pinthong, S. Kanprachar","doi":"10.1109/ECTICON.2011.5947835","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5947835","url":null,"abstract":"Multimode fiber (MF) has been used as a medium for transmitting a high data rate signal up to 10 Gbps over its high frequency region. This high frequency region of multimode fiber contains many passbands, which can be adopted as channels for sending many subcarrier signals. These passbands are located at different frequencies and vary from fiber to fiber depending on the delays of guided modes in the fiber. In this paper, the passbands at high frequency region of multimode fiber are studied. The delays of guided modes are assumed to be Gaussian distributed. The characteristics in terms of the average magnitude response and the average bandwidth of these passbands are determined. It is found that the average magnitude response of the passbands depends on the number of guided modes and the average bandwidth depends on the standard deviation of the delays.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"114 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128152406","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Simulation of subharmonic generation based on nonlinear oscillation from ultrasound contrast agents","authors":"C. Samakee, P. Phukpattaranont","doi":"10.1109/ECTICON.2011.5948015","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5948015","url":null,"abstract":"In this paper, we present simulation of nonlinear oscillation motion behavior from encapsulated ultrasound contrast agents (UCAs) insonified by acoustic pressure from ultrasound wave. The backscattered signals from UCA are composed of fundamental, second harmonic, ultraharmonic and subharmonic frequencies. Especially, the subharmonic generation is specific in UCA region. Then, the subharmonic can provide higher contrast-to-tissue ratio (CTR) than the fundamental and the second harmonics. As a result, the subharmonic components can be effectively applied for medical diagnosis. In this work, we study the optimization of ultrasound parameters, i.e., the transmitted frequencies and acoustic pressures, for subharmonic generation. The results show that the subharmonic generation can be maximized using the transmitted frequencies between 1.5ƒr (resonant frequency) MHz and 2ƒr MHz, and the acoustic pressures values in the range of 0.6 to 1.2 MPa.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"42 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133197611","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A multithreading methodology with OpenMP on multi-core CPUs: SNPHAP case study","authors":"Udom Ranok, S. Kittitornkun, S. Tongsima","doi":"10.1109/ECTICON.2011.5947874","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5947874","url":null,"abstract":"This paper presents a multithreading methodology for OpenMP library. The methodology can be applied to convert existing sequential and demanding programs to be multithreaded programs with OpenMP running on the Multi-core CPUs. In our experiments, we apply this methodology to SNPHAP, which is one of the best haplotype inference bioinformatics program in terms of speed. The results show that our significant achievement is the maximum Speedup 316% for Intel Xeon E5405 (8-core 2.0 GHz) and 410% for Intel Xeon E5520 (8-Core with HyperThreading 2.66GHz) faster than its own sequential version.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"221 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134118002","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}