International journal of advances in science, engineering and technology最新文献

{"title":"Stability analysis of three-dimensional thick rectangular plate using direct variational energy method","authors":"F. Onyeka","doi":"10.37121/jase.v6i2.187","DOIUrl":"https://doi.org/10.37121/jase.v6i2.187","url":null,"abstract":"This study investigated the elastic static stability analysis of homogeneous and isotropic thick rectangular plates with twelve boundary conditions and carrying uniformly distributed uniaxial compressive load using the direct variational method. In the analysis, a thick plate energy expression was developed from the three-dimensional (3-D) constitutive relations and kinematic deformation; thereafter the compatibility equations used to resolve the rotations and deflection relationship were obtained. Likewise, the governing equations were derived by minimizing the equation for the potential energy with respect to deflection. The governing equation is solved to obtain an exact deflection function which is produced by the trigonometric and polynomial displacement shape function. The degree of rotation was obtained from the equation of compatibility which when equated to the deflection function and put into the potential energy equation formulas for the analysis were obtained after differentiating the outcome with respect to the deflection coefficients. The result obtained shows that the non-dimensional values of critical buckling load decrease as the length-width ratio increases (square plate being the highest value), this continues until failure occurs. This implies that an increase in plate width increases the probability of failure in a plate. Hence, it can be deduced that as the in-plane load on the plate increase and approaches the critical buckling, the failure in a plate structure is abound to occur. Meanwhile, the values of critical buckling load increase as the span-thickness ratio increases for all aspect ratios. This means that, as the span-thickness ratio increases an increase in the thickness increases the safety in the plate. It also indicates that the capacity of the plate to resist buckling decreases as the span-depth ratio increases. To establish the credibility of the present study, classical plate theory (CPT), refined plate theory (RPT) and exact solution models from different studies were employed to validate the results. The present works critical buckling load varied with those of CPT and RPT with 7.70% signifying the coarseness of the classical and refined plate theories. This amount of difference cannot be overlooked. The average total percentage differences between the exact 3-D study (Moslemi et al., 2016), and the present model using polynomial and trigonometric displacement functions is less than 1.0%. These differences being so small and negligible indicates that the present model using trigonometric and polynomial produces an exact solution. Thus, confirming the efficacy and reliability of the model for the 3-D stability analysis of rectangular plates.","PeriodicalId":92218,"journal":{"name":"International journal of advances in science, engineering and technology","volume":"53 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-04-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81025802","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Leaching of Ibute-Nze kaolin iron-oxide impurity with oxalic acid process optimization of dissolution conditions using response surface methodology","authors":"D. Ochi, Hauwau Mahmud, Marcellinus O. Ani, S. Aliu","doi":"10.37121/jase.v6i1.181","DOIUrl":"https://doi.org/10.37121/jase.v6i1.181","url":null,"abstract":"The goal of this research was to remove iron oxide from Ibute-Nze kaolin by dissolving the clay mineral in an aqueous oxalic acid solution and optimizing the process. The chemical composition of the raw and modified clay was determined using x-ray fluorescence, and the morphology of the solid sample was determined using a scanning electron microscope. The best conditions for the oxalic acid leaching of iron-oxides impurity from Ibute-Nze kaolin were determined using response surface methodology based on Box-Behnken design. The studies were carried out within the following process parameter ranges: 40–90 leaching temperature; 0.075-0.355mm particle size; 1–6 mol/dm3 acid concentration; 0.02–0.12 g/cm3 kaolin sample to acid ratio and 30-240 min contact time. The characterization revealed that Ibute-Nze clay is kaolinitic in nature and calcination at 750 opens more pores for its leaching. According to the analysis of variance, a second-order polynomial regression equation provided the best fitting for the experimental data. The predicted and experimental response values were shown to be correlated (R2 = 0.9276) in the experimental runs. The following were found to be the best conditions for the leaching process variables: 83.2051 leaching temperature, 0.0827mm particle size, 3.6179mol/dm3 acid concentration; 0.0287g/cm3 kaolin to acid ratio and 217.932min reaction time. The chemical leaching process was 92.6035 per cent under these conditions, which made the clay good for industrial applications.","PeriodicalId":92218,"journal":{"name":"International journal of advances in science, engineering and technology","volume":"20 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-03-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"78203238","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Design and simulation of an effective backup power supply for academic institutions in Nigeria: A case study of NDA postgraduate school","authors":"Abel E. Airobaman, S. T. Apeh, Usman A. Sanusi","doi":"10.37121/jase.v6i1.179","DOIUrl":"https://doi.org/10.37121/jase.v6i1.179","url":null,"abstract":"This research work is aimed to mitigate the adverse effect of numerous portable generators used in academic environments due to the unstable power supply experienced in Nigeria. Data for the study on the existing backup, availability hours from the national grid, and load demand for the area of study were obtained from the residents of the campus, facility managers, and Kaduna Distribution Company as the grid supplier from August 2017 to December 2020. The average load of the campus was obtained to be 80kW. These were used as a baseline to obtain the required size and quantity of material to generate the backup power needed. A total ampere-hour requirement of the battery to be used was obtained to be 4,278.07Ah considering the average battery depth of discharge of 80%. This resulted in a total number of cells required to be 134 considering a battery with a 200Ah rating and a nominal voltage rating of 48V. A solar photovoltaic (PV) system rating of 166.4kW is required to sufficiently charge the battery bank and also serve the load. This amounts to a minimum of 5 panels per string connected in series and 34 number panels per string connected in parallel based on which the total number of panels required summed up to 666. The inverter rating for the load was obtained to be 150 kVA with a total load of 100 kVA, an efficiency of 80%, and an average future expansion of 20 %. A diesel generator rating of 100kVA with a starting kVA rating of 113.64kVA is required to efficiently serve the load considering future expansion of 1.1 and operating efficiency of 80 %. These obtained parameters were simulated using MATLAB/Simulink to test the feasibility of the backup systems. The generation cost of each backup was calculated based on which solar PV with battery bank has an initial energy generation cost of 81.9 ₦/kWh and a future energy generation cost of 0.27 ₦/kWh while diesel generator has an initial energy generation cost of 1602.04 ₦/kWh and a future energy generation cost of 8.07 ₦/kWh as such, PV has the least energy cost and more economical for the academic environment.","PeriodicalId":92218,"journal":{"name":"International journal of advances in science, engineering and technology","volume":"9 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-03-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"87491156","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Determination of best-fit isotherm model for the sorption of Lead (II) and Manganese (II) ions onto acid-activated shale using selected non-linear error functions","authors":"I. Ilaboya, J. S. Okpoko","doi":"10.37121/jase.v5i1.159","DOIUrl":"https://doi.org/10.37121/jase.v5i1.159","url":null,"abstract":"The focus of this research is to apply the selected error function equation to establish the equilibrium isotherm model that best describes the adsorption of Pb2+ and Mn2+ onto acid-activated shale.  Data collected from the batch experiment were analyzed using selected isotherm models (Langmuir, Freundlich, Temkin, Dubinin-Radushkevich, Sips and Redlich-Peterson). To compute the isotherm parameters used in choosing the best-fit isotherm model, selected non-linear error functions, namely, error sum of the square, normalized standard deviation, hybrid error function, root mean square error and Marquardt’s percent standard deviation were employed. From the scanning electron microscope results, it was observed that the surface characteristics of the shale change considerably with calcination and acid treatment but the acid-treated shale shows better uneven porous surface characteristics. Error function computation shows that the Dubinin-Radushkevich isotherm model had the least sum of normalized error of 0.3623 for Pb2+ adsorption and 0.5465 for Mn2+ adsorption; hence, it was selected as the best isotherm model for explaining the sorption of Pb(II) and Mn(II) ions unto acid-activated shale.","PeriodicalId":92218,"journal":{"name":"International journal of advances in science, engineering and technology","volume":"14 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-07-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"89384562","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Voltage profile improvement and losses minimization for Hayin Rigasa radial network Kaduna using distributed generation","authors":"I. A. Araga, A. Airoboman, Simon A. Auta","doi":"10.37121/jase.v5i1.163","DOIUrl":"https://doi.org/10.37121/jase.v5i1.163","url":null,"abstract":"This research work has presented the application of distributed generation (DG) units in a simultaneous placement approach on IEEE 33 radial test systems for validation of the technique with further implementation on 56-Bus Hayin Rigasa feeder. The genetic algorithm (GA) is employed in obtaining the optimal sizes and load loss sensitivity index for locations of the DGs for entire active and reactive power loss reduction. The voltage profile index is computed for each bus of the networks to ascertain the weakest voltage bus of the network before and after DG and circuit breaker allocation. The simultaneous placement approach of the DGs is tested with the IEEE 33-bus test networks and Hayin Rigasa feeder network and the results obtained are confirmed by comparing with the results gotten from separate DGs allocation on the networks. For IEEE 33-bus system, the simultaneous allocation of DGs and of optimal sizes 750 kW, 800 kW and at locations of buses 2 and 6 respectively, lead to a 66.49 % and 68.64 % drop in active and reactive power loss and 3.02 % improvement in voltage profile. For the 56-bus Hayin Rigasa network in Kaduna distribution network, the simultaneous placement of DGs of sizes 1,470 kW and 1490 kW at locations of bus 16 and 23 respectively, lead to a 79.54 % and 73.98 % drop in active and reactive power loss and 15.94 % improvement in voltage profile. From results comparison, it is evident that the allocation of DGs using the combination GA and load loss sensitivity index, gives an improved performance in relations to power loss reduction and voltage profile improvements of networks when compared to without DGs.","PeriodicalId":92218,"journal":{"name":"International journal of advances in science, engineering and technology","volume":"15 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-07-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82444773","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Development of a horizontal three bladed windmill with vortex tubes","authors":"P. Major, A. Adavbiele, S. O. Jimoh","doi":"10.37121/jase.v5i1.168","DOIUrl":"https://doi.org/10.37121/jase.v5i1.168","url":null,"abstract":"Researchers have been continuously searching for the most readily available means of producing electricity without any negative effect on the environment. Renewable source of energy like solar energy, hydro electric energy, biomass and wind energy has been considered as the alternative. Wind energy among others is rated the best renewable sources of energy because it’s level of environmental friendliness. In this paper, a horizontal windmill was designed, fabricated and its performance evaluated with two types of vortices and without a vortex. The component parts of the mills are towel, blades, shafts, base, tail vain and vortex. During the design of the windmill, consideration was given to the size, area of the blade and the blade material that produce maximum speed. The performance evaluation was carried out to compare the performance of the mill with the solid vortex, gap vortex and without vortex. The result of the evaluation reflects that the solid vortices have the highest wind speed irrespective of time of the day and with an optimum wind speed of 5.04 m/s. Also, the wind mill performed at a higher efficiency with the vortex compare to when it was running without vortex.  ","PeriodicalId":92218,"journal":{"name":"International journal of advances in science, engineering and technology","volume":"25 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-07-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83364728","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Estimated billing system is the bane of grid electric power supply and development in Nigeria: An empirical analysis","authors":"Anthony Chibuike Ohajianya","doi":"10.37121/jase.v5i1.157","DOIUrl":"https://doi.org/10.37121/jase.v5i1.157","url":null,"abstract":"The estimated billing system for electricity was introduced in Nigeria by the Nigerian Electricity Regulatory Commission (NERC) in 2012 for billing customers without meters or with faulty or inaccessible meters. But instead of following the guidelines and formula provided by NERC for the estimation, the electricity Distribution Companies (DisCos) resorted to billing these customers arbitrarily and frustrated efforts by NERC to ensure the proper metering of electricity consumers. This research evaluates the incentive, which makes the DisCos in Nigeria prefer the estimating billing system to a much more efficient smart prepaid metering system. To carry out the research, four Enugu Electricity Distribution Company (EEDC) customers were selected. The estimated bills of these customers, which they received before they got smart prepaid meters, were compared with their prepaid meter bills for an equal period. EEDC was found to be over-billing these customers under the estimated billing system by a yearly average per customer of 64,901.67 Nigerian Naira (170.79 USD).","PeriodicalId":92218,"journal":{"name":"International journal of advances in science, engineering and technology","volume":"32 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-07-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84399235","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Statistical prediction of the drying behavior of blanched ginger rhizomes","authors":"A. Gbasouzor, Jude Ezechi Dara, C. Mgbemena","doi":"10.37121/JASE.V4I2.147","DOIUrl":"https://doi.org/10.37121/JASE.V4I2.147","url":null,"abstract":"ARS-680 environmental chamber was employed in this study to determine the drying behavior of sliced ginger rhizomes. Blanched and unblanched treated ginger rhizomes were considered at drying temperature of 40 °C for a period of 2 – 24 h. Linear and non-linear regression analyses were employed to establish the correlation that exits between the drying time and the moisture ratio. Correlation analysis, root mean square error (RMSE) and standard error of estimate (SEE) analysis were chosen in selecting the best thin layer drying models. Higher values of determination coefficient (R2) show goodness of fit and lower values of SEE implies better correlation; and RMSE values were also utilized in determining the goodness of fit. The drying data of the variously treated ginger samples were fitted into the twelve thin layer drying models and the data obtained were fitted by multiple non-linear regression technique. Blanched treated sample exhibited a better drying behavior losing about 82.87 % moisture content compared with unbleached sample that lost about 62.03 % of moisture content. Two-term exponential drying model proved to be the most suitable model for predicting the drying behavior of ginger rhizome. The model exhibited high R2 values of 0.9349-0.9792 (which are close to unity) for both blanched and unbleached samples. Also, it recorded relatively low values of RMSE and SEE (3.6865 - 2.0896 and 3.6564-2.7486 respectively) for both treatments.  ","PeriodicalId":92218,"journal":{"name":"International journal of advances in science, engineering and technology","volume":"9 1","pages":"98-107"},"PeriodicalIF":0.0,"publicationDate":"2021-04-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90224764","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"CANFIS based DSTATCOM modelling for solving power quality problems","authors":"B. B. Bukata, R. A. Gezawa","doi":"10.37121/JASE.V4I2.148","DOIUrl":"https://doi.org/10.37121/JASE.V4I2.148","url":null,"abstract":"Devolution of the power grid into smart grid was necessitated by the proliferation of sensitive load profiles into the system, as well as incessant environmental challenges. These two factors culminated into aggravated disturbances that cause serious havoc along the entire system structure. The traditional proportional-plus-integral-plus-derivative (PID) solution offered by the distribution synchronous compensator (DSTATCOM) could no longer hold. As such, this paper proposes some soft-computing framework for redesigning DSTATCOM to automatically deal with power quality (PQ) problems in smart distribution grids. A recipe of artificial neural network (ANN) and coactive neuro-fuzzy inference systems (CANFIS) was fabricated for the objective. The system was modelled, simulated, and validated in MATLAB/Simulink SimPowerSystems environment. The performance of the CANFIS against adaptive neuro-fuzzy inference systems (ANFIS), ANN and fuzzy logic controllers’ algorithms proved superior in handling PQ issues like voltage sag, voltage swell and harmonics.","PeriodicalId":92218,"journal":{"name":"International journal of advances in science, engineering and technology","volume":"86 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-04-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"79132446","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Investigation of the spatial variation of sediments heavy metals along the Nun River using kriging interpolation technique","authors":"I. Ilaboya, J. Ehiorobo, N. Onwo","doi":"10.37121/JASE.V4I2.151","DOIUrl":"https://doi.org/10.37121/JASE.V4I2.151","url":null,"abstract":"This study employs geospatial statistical technique to assess the spatial distribution of heavy metals along the Nun River. Core sediment samples were collected from relatively undisturbed areas (twenty-five different stations) using Uwitec Triple sediment cutter. The rectangular coordinates of the sediment sample location were determined with the aid of Germin handheld GPS receiver. The concentrations of cadmium, lead chromium and zinc present in the sediments was determined with the aid of an atomic absorption spectrophotometer. For geospatial analysis, five semi-variogram models (stable, circular, spherical, exponential and K-Bessel) were fitted for each of the four critical parameters (heavy metals). In addition, four goodness-of-fit statistics (mean square error, root mean square error, root mean square standardized error and average standard error) were utilized to decide the most suitable model used to develop the final prediction map for each parameter. From the results obtained, it was observed that; regions with red color codes signify higher concentrations of cadmium, lead, chromium and zinc. Further assessment of the results showed that Otuan, Obeleli, Angiama, Odobio, Kasama, Akedda and Akele experienced high concentration of cadmium while Tombia, Ewoi, Abilabio, Agudama and Yenikpa experienced high concentration of lead.","PeriodicalId":92218,"journal":{"name":"International journal of advances in science, engineering and technology","volume":"36 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-04-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90121205","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}