Croatian Journal of Forest Engineering最新文献

{"title":"Challenges in Forestry and Forest Engineering","authors":"P. Mederski, S. A. Borz, Andreja Đuka, A. Lazdiņš","doi":"10.5552/crojfe.2021.838","DOIUrl":"https://doi.org/10.5552/crojfe.2021.838","url":null,"abstract":"The forestry and timber industry are strong sectors in the economies of European countries. The current trend of introducing forestry management that respects the various functions of the forest has created new challenges. However, forestry itself, as well as those challenges, varies in different regions in Europe. The aim of this review paper was to describe forest resources and their potential as well to define challenges in forestry and forest engineering in regions of East Europe. Case studies were selected from four countries: Croatia, Latvia, Poland and Romania. The background data and information of the forest-based sector included: forest resources and forest productivity, forest utilisation, development of forest operations and difficulties in forest management. In the analysed countries, state-owned forestry was represented by at least 45%. Forestry is an important sector in all four countries and future challenges are observed in forest management and forest engineering mainly including: an increase in timber resources, improvement in species composition for better productivity and the introduction of effective mechanised forest operations in pre-commercial thinning. Further improvement of harvester heads is expected for the harvesting of broadleaved species and for young stands. Issues linked to the environment were also recognised as challenging factors: mild winters make it difficult to use CTL technology on wet and sensitive sites. Additionally, dry seasons have a high impact on forest fire frequency, but this can be controlled by effective monitoring systems. Improvement in IT systems used in forest operations should limit the carbon footprint by optimising transport, machine use and limiting fuel use. Finally, innovations are recognised as key issues in the improvement of forest management and forest engineering; therefore, special budgets have been allocated to support science and development.","PeriodicalId":55204,"journal":{"name":"Croatian Journal of Forest Engineering","volume":"42 1","pages":"117-134"},"PeriodicalIF":3.2,"publicationDate":"2021-01-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46628931","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Battery Technology","authors":"Z. Pandur, M. Šušnjar, M. Bačić","doi":"10.5552/crojfe.2021.798","DOIUrl":"https://doi.org/10.5552/crojfe.2021.798","url":null,"abstract":"Technical development and system optimization during the last decades have targeted more efficient, socially acceptable and ecologically sustainable ways to use forestry machines and tools. This is supported by the development of electronics and electrical components, as well as battery technology, without which it is impossible to imagine doing some forestry work in forest areas with no permanent source of electricity. Today, we cannot imagine life without e.g. a cell phone, and also doing business in the forestry sector without a field computer. There are numerous examples in everyday life, but also in industry, where portable devices make life and business much easier, and the basis for the operation of these devices is battery technology. The importance of the development of battery technology is proven by the fact that in 2019 the Nobel Prize in Chemistry went into the hands of scientists who developed a lithium-ion battery - a lightweight, rechargeable and powerful battery that is used today in numerous products from mobile phones to laptops and electric vehicles. This paper will outline the historical development of battery technology and the use of battery powered devices, tools and machines with their advantages and disadvantages in forestry sector.","PeriodicalId":55204,"journal":{"name":"Croatian Journal of Forest Engineering","volume":"42 1","pages":"135-148"},"PeriodicalIF":3.2,"publicationDate":"2021-01-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43934070","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Pavement Engineering for Forest Roads","authors":"H. Heinimann","doi":"10.5552/CROJFE.2021.860","DOIUrl":"https://doi.org/10.5552/CROJFE.2021.860","url":null,"abstract":"Pavement is an essential component of roads as it carries the traffic and provides the required riding comfort. Considering that numerous forest roads are approaching their end of life, the critical issue is identifying the best rational pavement design methods to reengineer existing and build new pavement structures. The purpose of this contribution was (1) to review the big development lines of pavement systems, (2) to have a critical look at the pavement engineering framework, and (3) to bring selected empirical design equations into a comparable scheme. The study resulted in the following significant findings. First, the Trésaguet and McAdam pavement systems represented the state of the art from the beginning of a formal forest road engineering discipline at the beginning of the 19 century and remained for almost 150 years. Second, the emergence of soil mechanics as a scientific discipline in the 1920s resulted in the optimal grading of aggregates and improvement of soils and aggregates with binders, such as lime, cement, and bitumen. Third, the rational pavement design consists of five essential components: (1) bearing resistance of the subsoil, (2) bearing resistance of the pavement structure, (3) lifecycle traffic volume, (4) uncertainties that amplify deterioration, and (5) the limit state criterion, defining thresholds, above which structural safety and serviceability are no longer met. Fourth, rational, formal pavement design approaches used for forest roads were »downsized« from methodologies developed for high-volume roads, among which the approaches of the American Association of State Highway and Transportation Officials (AASHTO) and US Army Corps of Engineers (USACE) are of primary interest. Fifth, the conversion of the AASHTO ‘93 and USACE ‘70 methods into the SI system indicated that both equations are sensitive to soil bearing resistance, measured in California Bearing Ratio (CBR). However, there is a lack of validation for the AASHTO and USACE equations for forest road conditions. Consequently, a factorial observational study to gain a basis for validation should be developed and implemented. Additionally, the conversion of simple soil bearing resistance measures, such as CBR, into the resilient modulus will be improved.","PeriodicalId":55204,"journal":{"name":"Croatian Journal of Forest Engineering","volume":"42 1","pages":"91-106"},"PeriodicalIF":3.2,"publicationDate":"2021-01-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47584667","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Evaluation of an HSM 208F 14tone HVT-R2 Forwarder Prototype under Conditions of Steep-Terrain Low-Access Forests","authors":"S. A. Borz, M. Marcu, M. Cataldo","doi":"10.5552/CROJFE.2021.775","DOIUrl":"https://doi.org/10.5552/CROJFE.2021.775","url":null,"abstract":"Forwarding technology is well established in use around the world but, at the same time, forwarders are expensive machines that require a good planning to ensure the sustainability of operations. In addition, forwarder market is characterized by a limited pool of customers, therefore innovation attempts may be limited compared to other product development industries. Since the steps towards a full automation of operations are still at their beginning, improvements of forwarder machines may rest in developing and integrating components that could contribute to an increased effectiveness. To respond to such challenges, the Forwarder2020 project developed innovative components that were integrated in a number of forwarder prototypes based on a market pull approach that resulted in a flexible adaptation to customer requirements and work environments. Since one of the typical work environments was that of low access forests, some components (i.e. suspended cabin and transmission system) were engineered to enable faster and safer operations and to economize fuel. As a common validation step is that of bringing field evidence on the performance improvement, this study evaluated the operational speed, productivity and fuel consumption of a forwarder prototype in conditions of a steep-terrain low-access forest. The main findings were very promising as the prototype was able to operate at significantly increased speeds and the fuel savings were evident. For an average forwarding distance of about 1.5 km, net productivity and efficiency rates were estimated at 14.4 m3/h and 0.07 h/m3, respectively. They were related to the availability of wood, and further improvement of such figures is possible by a better organization of tree felling and processing. Operational speed was affected by the condition of skid roads used for forwarding, which were harsh. During the transportation tasks developed on roads typical for forwarding, the machine was able to sustain average speeds estimated at 8 km/h. As a matter of fact, in such tasks, the dominant operational speed (almost in 100% of the cases) was higher than 5 km/h irrespective of the road condition. Hourly fuel consumption was estimated based on the time in which the engine was working and it amounted to 17.1 l/h. More importantly, by considering the forwarded payload in terms of volume and mass, the unit fuel consumption was estimated to be 1.25 l/m3 and 1.47 l/t, respectively. These results bring evidence on the performance improvement by modular innovation. In fact, such solutions could answer the challenges related to the sustainability of forest operations in low access forests.","PeriodicalId":55204,"journal":{"name":"Croatian Journal of Forest Engineering","volume":" ","pages":""},"PeriodicalIF":3.2,"publicationDate":"2021-01-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42149258","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Developing an Automated Monitoring System for Cable Yarding Systems","authors":"R. Gallo, R. Visser, F. Mazzetto","doi":"10.5552/CROJFE.2021.768","DOIUrl":"https://doi.org/10.5552/CROJFE.2021.768","url":null,"abstract":"Cable yarders are often the preferred harvesting system when extracting trees on steep terrain. While the practice of cable logging is well established, productivity is dependent on many stand and terrain variables. Being able to continuously monitor a cable yarder operation would provide the opportunity not only to manage and improve the system, but also to study the effect on operations in different conditions.This paper presents the results of an automated monitoring system that was developed and tested on a series of cable yarder operations. The system is based on the installation of a Geographical Navigation Satellite System (GNSS) onto the carriage, coupled with a data-logging unit and a data analysis program. The analysis program includes a set of algorithms able to transform the raw carriage movement data into detailed timing elements. Outputs include basic aspects such average extraction distance, average inhaul and outhaul carriage speed, but is also able to distinguish number of cycles, cycle time, as well as break the cycles into its distinct elements of outhaul, hook, inhaul and unhook.The system was tested in eight locations; four in thinning operations in Italy and four clear-cut operations in New Zealand, using three different rigging configuration of motorized slack-pulling, motorized grapple and North Bend. At all locations, a manual time and motion study was completed for comparison to the data produced by the newly developed automated system. Results showed that the system was able to identify 98% of the 369 cycles measured. The 8 cycles not detected were directly attributed to the loss of GNSS signal at two Italian sites with tree cover. For the remaining 361 cycles, the difference in gross cycle time was less than 1% and the overall accuracy for the separate elements of the cycle was less than 3% when considered at the rigging system level. The study showed that the data analyses system developed can readily convert GNSS data of the carriage movement into information useful for monitoring and studying cable yarding operations.","PeriodicalId":55204,"journal":{"name":"Croatian Journal of Forest Engineering","volume":" ","pages":""},"PeriodicalIF":3.2,"publicationDate":"2021-01-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46970218","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Economic Feasibility of Electrical Power Cogeneration from Forestry Biomass in an Engineered Wood Panel Industrial Facility","authors":"André Gustavo Oliveira Souza, F. Barbosa, M. S. S. Esperancini, S. Guerra","doi":"10.5552/CROJFE.2021.873","DOIUrl":"https://doi.org/10.5552/CROJFE.2021.873","url":null,"abstract":"The use of sugarcane bagasse, straw, and chaff for electrical power generation in sugar-ethanol mills has been established; more recently, the recovery of forest biomass has been increasing in an attempt to reduce the use of fossil fuels and to increase electrical power generation focused on self-consumption. The potential for power generation in this segment is considerable, but the use of biomass in cogeneration processes depends on an attractive return on investments. This study was designed to analyze the economic feasibility of investment in thermal and electrical power generation equipment that makes it possible to use forest and logging residues and wood chips to replace the current gas-fired power generation in an engineered wood panel industry facility (Scenario 1) or investment only in thermal generation equipment (Scenario 2). Results showed that the investment to replace natural gas with forest biomass is economically viable not only for the generation of both types of energy but also for the generation of thermal energy itself. High costs of energy inputs such as natural gas and electricity for the industry explain the results, despite the requirement for high investments in cogeneration systems.","PeriodicalId":55204,"journal":{"name":"Croatian Journal of Forest Engineering","volume":" ","pages":""},"PeriodicalIF":3.2,"publicationDate":"2021-01-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41703424","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Evaluating the Effects of Improving Forest Road Standards on Economic Value of Forest Products","authors":"A. Akay, H. Serin, J. Sessions, E. Bi̇li̇ci̇, M. Pak","doi":"10.5552/CROJFE.2021.851","DOIUrl":"https://doi.org/10.5552/CROJFE.2021.851","url":null,"abstract":"Forest roads are the key infrastructures that provide access to forest areas for sustainable management, protection, and utilization of forest resources. In order to benefit from the important functions of forest roads, they should be built in with adequate technical road standards. The road network with low technical standards require more frequent major repairs to ensure continues access to forest resources. In addition, only small trucks with low load capacity can move on the low standard roads. Furthermore, the low road standards limit the truck speed that increases vehicle travel time. These negative effects increase the transportation costs which are an important part of the timber production costs in Turkey. Thus, improving the road standards and developing forest transportation planning should be evaluated together in the most appropriate way. Large logging trucks with high load capacity are generally preferred for efficient transportation of wood-based forest products. In Turkey, large logging trucks, however, cannot operate on the most of the forest roads because insufficient technical road standards (road width, curve radius, surface materials, road structures) limit the maneuverability of large logging trucks. In this study, the objective is to determine the effects of improving forest road standards on total net profit of forest products by using the NETWORK 2000 program, a heuristic approach for solving forest transportation problems. Three Forest Enterprise Chiefs (FECs) located in Mustafakemalpaşa Forest Enterprise Directorate (FED) in Bursa Forest Regional Directorate were selected as the study area. The digital data layers for forest road network was generated by using ArcGIS 10.4 software. In the solution process, firstly, the optimum routes that minimize the transportation cost and maximize the total net profit of forest products on existing forest road networks were investigated for a truck type (15 ton) currently used in the region. In the second case, forest transportation was planned for the high load capacity truck (29 ton) moving on the forest roads with improved standards. In the first case, the transportation costs and annual major repair costs were considered in the calculation of the net profit of forest products, while one time cost of road improvement activities (i.e. road improvement construction, road structure installation, road surface construction) and annual maintenance costs were considered along with transportation costs in the second case. In both cases, the costs of other forest operations (i.e. felling, logging, etc.) were not considered since it was assumed that they do not vary with the forest transportation alternatives. As a result of the transportation plan developed for high load capacity truck, the annual transportation cost decreased by 46.85% comparing to the local logging trucks with low load capacity. Using improved road standards, the total road costs computed for the time period of 30 years ","PeriodicalId":55204,"journal":{"name":"Croatian Journal of Forest Engineering","volume":" ","pages":""},"PeriodicalIF":3.2,"publicationDate":"2021-01-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47263504","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Influence of Saturated Organic Matter on the Accuracy of In-Situ Measurements Recorded with a Nuclear Moisture and Density Gauge","authors":"Eric R. Labelle, D. Jaeger","doi":"10.5552/CROJFE.2021.762","DOIUrl":"https://doi.org/10.5552/CROJFE.2021.762","url":null,"abstract":"The impact of machines on forest soils is regularly assessed and quantified using absolute bulk density, which is most frequently obtained by soil cores. However, to allow for repeated measurements at the exact same locations, non-destructive devices are increasingly being used to determine soil bulk density and moisture content in field studies. An example of such a device is a nuclear moisture and density gauge (NMDG), originally designed as a control measurement for soil bulk density and moisture content in geotechnical applications. Unlike road construction or foundation projects that use mineral soil or gravel, forest soils have complex structures and the presence of organic matter, which can skew moisture and density readings from a NMDG. To gain further knowledge in this respect, we performed controlled tests in a sandbox to quantify the influence of varying amounts of saturated organic matter (3, 5, 10, and 15%) mixed with mineral soil in different layers (0–5, 0–10, 0–20 and 0–40 cm) on the accuracy of soil moisture content obtained by a NMDG and soil theta probe at varying depths. Main results illustrated that the presence of saturated organic matter per se was not problematic but moisture content overestimations and related underestimation of dry bulk density occurred when the tested measurement depth was below the created organic layer. Since forest soils often exhibit higher organic matter contents in the upper horizon, correction factors are suggested to minimize the moisture content variations between NMDG and reference method. With the use of correction factors, NMDG can present a non-destructive, fast, and accurate method of measuring soil moisture and bulk density in forestry applications.","PeriodicalId":55204,"journal":{"name":"Croatian Journal of Forest Engineering","volume":" ","pages":""},"PeriodicalIF":3.2,"publicationDate":"2021-01-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44189226","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Efficiency of Different Anti-Dust Agents in Reducing Dust Emission from Forest Road and Deposition on Leaf Surface","authors":"A. Parsakhoo, S. A. Hosseini, M. Lotfalian, J. Mohammadi, M. Salarijazi","doi":"10.5552/CROJFE.2021.740","DOIUrl":"https://doi.org/10.5552/CROJFE.2021.740","url":null,"abstract":"Dust is often generated from the dry surfaces of unpaved forest roads as a result of vehicular traffic. Dust particles can negatively affect vegetative growth, water quality and road traffic quality. In this study, some environmental friendly anti-dust agents including sugar cane molasses, polyacrylamide (PAM) and bentonite were used to control dust emission from the road surface under three different concentrations within the 3, 9, 27 and 81 day timeframe. Rear-mounted spray system and dustometer devices were used for implementation of treatments and dust emission recording, respectively. Leaf samples were collected from trees adjacent to road to measure the dust deposited on the leaves by centrifuging dust solution. The results showed that molasses achieved higher efficiencies in term of dust reduction and cost effectiveness than those of PAM and bentonite in Loveh forest, where high levels of fines are present in the road surface materials. 2% and 4% PAM were the most efficient dosages in terms of dust control and cost effectiveness in Shastkalateh and Kouhmian forests, respectively. It was detected that in all sites most of the dust emitted from the road surface was deposited on the leaves of Carpinus betulus L. and Alnus subcordata L., while smooth surface of the leaves retained lower amount of dust in Parrotia persica CAM. It is concluded that the amount of fine aggregates in surfacing materials, type and dosage of anti-dust agent play an important role in the effectiveness and longevity of treatment.","PeriodicalId":55204,"journal":{"name":"Croatian Journal of Forest Engineering","volume":" ","pages":""},"PeriodicalIF":3.2,"publicationDate":"2021-01-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43509160","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"The Effect of Yarding Technique on Yarding Productivity and Cost","authors":"R. Spinelli, N. Magagnotti, Giulio Cosola, Eric R. Labelle, R. Visser, Gernot Erber","doi":"10.5552/CROJFE.2021.886","DOIUrl":"https://doi.org/10.5552/CROJFE.2021.886","url":null,"abstract":"Cable yarding is a well establish technology for the extraction of timber in steep terrain. However, it is encumbered with relatively low productivity and high costs, and as such this technology needs to adapt and progress to remain viable. The development of biomass as a valuable byproduct, and the availability of processors to support yarder operations, lend themselves to increasing the level of whole-tree extraction. Double-hitch carriages have been developed to allow for full suspension of whole-tree and tree-length material. This study compared a standard single-hitch to a double-hitch carriage under controlled conditions, namely in the same location using the same yarder with downhill extraction. As expected, the double-hitch carriage took longer to load up (+14%), but was able to achieve similar productivity (10–11 m3 per productive machine hour) through increased inhaul speed (+15%). The importance of this study is that it demonstrates both the physical and economic feasibility of moving to whole-tree extraction using the double-hitch type carriage for longer corridors, for settings with limited deflection, or areas with lower tolerance for soil disturbance.","PeriodicalId":55204,"journal":{"name":"Croatian Journal of Forest Engineering","volume":"1 1","pages":""},"PeriodicalIF":3.2,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"71027191","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":2,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}