Journal of Applied Mechanics-Transactions of the Asme最新文献_第7页

Deposition Temperature Induced Texture and Strengthening of Ti/Ni Multilayer Thin Films Ti/Ni多层薄膜沉积温度诱导织构及强化

IF 2.6 4区工程技术

Journal of Applied Mechanics-Transactions of the Asme Pub Date : 2023-06-21 DOI: 10.1115/1.4062775

Zhou Yang, Junlan Wang

{"title":"Deposition Temperature Induced Texture and Strengthening of Ti/Ni Multilayer Thin Films","authors":"Zhou Yang, Junlan Wang","doi":"10.1115/1.4062775","DOIUrl":"https://doi.org/10.1115/1.4062775","url":null,"abstract":"\u0000 Strong thermal effect on microstructure and mechanical properties of Ti/Ni multilayer thin films was observed from in-situ heating during deposition and subsequent annealing. Films deposited at low-temperature show preferred crystallographic texture for both Ti and Ni layers, with columnar structure extending through the layers. The columnar structure become more distinct and complete with the increase of temperature up to 300°C, and meanwhile more atomic diffusion and intermixing occur along the Ti/Ni interfaces, promoting the formation of Ti-Ni intermetallic precipitates. High-temperature deposition causes disintegration of the layered structure. Columnar Ti-Ni alloys and further recrystallized alloys were detected with preferred crystallographic texture. For material strength, an increased hardness trend is observed with increasing deposition temperature even with much larger grain size compared to room temperature case. Furthermore, for multilayer system deposited under low temperature, post annealing results in higher hardness with minimal microstructure modification, with more strengthening observed in lower deposition temperature case.","PeriodicalId":54880,"journal":{"name":"Journal of Applied Mechanics-Transactions of the Asme","volume":null,"pages":null},"PeriodicalIF":2.6,"publicationDate":"2023-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41430336","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Perspective: Large Language Models in Applied Mechanics 透视：应用力学中的大语言模型

IF 2.6 4区工程技术

Journal of Applied Mechanics-Transactions of the Asme Pub Date : 2023-06-21 DOI: 10.1115/1.4062773

Neal R. Brodnik, Samuel Carton, Caelin Muir, Satanu Ghosh, Doug Downey, M. Echlin, T. Pollock, S. Daly

引用次数: 2

Correlation of Microstructure and Nanomechanical Properties of Additively Manufactured Inconel 718 添加铬镍铁合金718微观结构与纳米力学性能的相关性

IF 2.6 4区工程技术

Journal of Applied Mechanics-Transactions of the Asme Pub Date : 2023-06-21 DOI: 10.1115/1.4062776

Allen Kim, Lily Vu, Tony Chung, David Song, Junlan Wang

{"title":"Correlation of Microstructure and Nanomechanical Properties of Additively Manufactured Inconel 718","authors":"Allen Kim, Lily Vu, Tony Chung, David Song, Junlan Wang","doi":"10.1115/1.4062776","DOIUrl":"https://doi.org/10.1115/1.4062776","url":null,"abstract":"\u0000 Additive manufacturing (AM) has emerged as a crucial technology in recent decades, particularly within aerospace industry. However, the thermally cyclic nature of these processes introduce significant variations and defects in microstructure, which can adversely affect final part performance and hinder the widespread adoption of the technology. Traditionally, characterization of AM parts has relied on conventional bulk testing methods, which involve analyzing many samples to gather sufficient data for statistical analysis. Unfortunately, these methods are unable to account for local nanoscale variations in material properties caused by the microstructure, as they measure a single averaged property for each tested sample. In this work, we use AM Inconel 718 as a model system in developing a novel approach to correlate nanomechanical properties obtained through nanoindentation with microstructure obtained through electron backscatter diffraction (EBSD). By associating mechanical properties obtained from each indent with the corresponding crystallographic direction measured with EBSD, we calculate the weighted average hardness and modulus for each orientation. This enables us to generate inverse property figure maps depicting the relationship between mechanical properties and crystallographic direction. Our method yields results in good agreement with literature when calculating the part modulus and hardness. Furthermore, it effectively captures nanoscale variations in properties across the microstructure. The key advantage of this methodology is its capability to rapidly test a single AM part and generate a large dataset for statistical analysis. Complementing existing macroscale characterization techniques, this method can help improve AM part performance prediction and contribute to the wider adoption of AM technologies.","PeriodicalId":54880,"journal":{"name":"Journal of Applied Mechanics-Transactions of the Asme","volume":null,"pages":null},"PeriodicalIF":2.6,"publicationDate":"2023-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49070496","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Creating Geometric Imperfections in Thin-Walled Structures using Acoustic Excitation 利用声激励在薄壁结构中产生几何缺陷

IF 2.6 4区工程技术

Journal of Applied Mechanics-Transactions of the Asme Pub Date : 2023-06-16 DOI: 10.1115/1.4062746

Jennifer Xue, Zheren Baizhikova, R. Ballarini, Tian Chen

{"title":"Creating Geometric Imperfections in Thin-Walled Structures using Acoustic Excitation","authors":"Jennifer Xue, Zheren Baizhikova, R. Ballarini, Tian Chen","doi":"10.1115/1.4062746","DOIUrl":"https://doi.org/10.1115/1.4062746","url":null,"abstract":"\u0000 Thermomechanical buckling of slender and thin-walled structural components happens without warning and can lead to catastrophic failure. Similar phenomena are observed during plasmolysis (contraction of a plant cell’s protoplast) and rupture of viral capsids. Analytical formulas derived from stability analyses of elastic plates, cylinders, and shells that do not account for the effects of random geometric imperfections introduced during the manufacturing process or biological growth may vastly over-estimate buckling capacity. To ensure structural safety the formulas must therefore be combined with empirical data to define “knock down factors” which are in turn used to establish safety factors. Towards improved understanding of the role of imperfections on mechanical response, ingenious methods have been used to fabricate and test near-perfectly hemispherical shells and those containing dimple-like defects. However, a method of inducing imperfections in the form of randomly-shaped surfaces remains elusive. We introduce a protocol for realizing such imperfect shells and measuring the pressure required to buckle them. Silicone is poured onto an elastomeric mold under an acoustic excitation, which can be either random sound, or if desired the same as the modal frequency of the mold. Illustrative micro-Computed-Tomography images and buckling pressure experiments of a nearly-perfect shell and an imperfect one show that the method is effective in introducing randomly-shaped imperfections of significant magnitudes. This proof-of-concept study demonstrates that the experimental results when combined with computational simulations can lead to improved understanding of stochastic buckling phenomena.","PeriodicalId":54880,"journal":{"name":"Journal of Applied Mechanics-Transactions of the Asme","volume":null,"pages":null},"PeriodicalIF":2.6,"publicationDate":"2023-06-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44386328","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

On Jump Discontinuities in Internal Forces of Flexible Structures Carrying Moving Subsystems 承载运动子系统的柔性结构内力的跳跃不连续

4区工程技术

Journal of Applied Mechanics-Transactions of the Asme Pub Date : 2023-06-15 DOI: 10.1115/1.4062628

Bingen Yang, Hao Gao

{"title":"On Jump Discontinuities in Internal Forces of Flexible Structures Carrying Moving Subsystems","authors":"Bingen Yang, Hao Gao","doi":"10.1115/1.4062628","DOIUrl":"https://doi.org/10.1115/1.4062628","url":null,"abstract":"Abstract Combined systems, which are flexible structures carrying moving subsystems, are seen in various applications. Due to structure–subsystem interactions, the structure in a combined system encounters jump discontinuities in its internal forces (such as the bending moment and shear force of a beam). Accurate estimation of such jump discontinuities is important to the performance, safety, and longevity of a combined system. Because of the time-varying nature and complexity of structure–subsystem interactions, conventional series solution methods experience slow convergence, and the Gibbs phenomenon in computation and the improved series expansion methods are limited to certain proportionally damped continua under moving forces and moving oscillators. In this paper, a novel modified series expansion method (MSEM) is proposed to resolve the aforementioned issues with the existing series solution methods. Through the introduction of a jump influence function, the proposed method produces fast-convergent series solutions and accurately predicts the jump discontinuities without the Gibbs phenomenon. The MSEM is applicable to structures with nonproportional damping and subject to arbitrary boundary conditions, and it can easily manage general M-DOF moving subsystems having multiple contact points with a supporting structure. As an important result of this investigation, a mathematical proof of the convergence of the MSEM-based solutions is given for the first time. Additionally, two numerical examples are presented to demonstrate the accuracy, efficiency, and versatility of the proposed MSEM in modeling and analysis of combined systems.","PeriodicalId":54880,"journal":{"name":"Journal of Applied Mechanics-Transactions of the Asme","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134890883","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

A cavity-based micromechanical model for the shear band failure in metallic glasses under arbitrary stress states 基于空腔的任意应力状态下金属玻璃剪切带破坏微观力学模型

IF 2.6 4区工程技术

Journal of Applied Mechanics-Transactions of the Asme Pub Date : 2023-06-09 DOI: 10.1115/1.4062724

Yanfei Gao

{"title":"A cavity-based micromechanical model for the shear band failure in metallic glasses under arbitrary stress states","authors":"Yanfei Gao","doi":"10.1115/1.4062724","DOIUrl":"https://doi.org/10.1115/1.4062724","url":null,"abstract":"\u0000 Deformation and fracture of metallic glasses are often modeled by stress-based criteria which often incorporate some sorts of pressure dependence. However, detailed mechanisms that are responsible for the shear band formation and the entire damage initiation and evolution process are complex and the origin of such a pressure dependence is obscure. Here we argue that the shear band formation results from the constitutive instability, so that the shear-band angle and arrangements can be easily related to the macroscopic constitutive parameters such as internal friction and dilatancy factor. This is one reason for the observed tension-compression asymmetry in metallic glasses. The free volume coalescence leads to precipitous formation of voids or cavities inside the shear bands, and the intrinsic “ductility” is therefore governed by the growth of these cavities. Based on a generalized Stokes-Hookean analogy, we can derive the critical shear-band failure strain with respect to the applied stress triaxiality, in which the cavity evolution scenarios are sharply different between tension-controlled and shear/compression-dominated conditions. This is another possible reason for the tension-compression asymmetry. It is noted that diffusive-controlled cavity growth could also be the rate-determining process, as suggested by the recent measurements of shear-band diffusivity and viscosity that turn out to satisfy the Stokes-Einstein relationship. This constitutes the third possible reason for the tension-compression asymmetry.","PeriodicalId":54880,"journal":{"name":"Journal of Applied Mechanics-Transactions of the Asme","volume":null,"pages":null},"PeriodicalIF":2.6,"publicationDate":"2023-06-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45189581","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Mechanics of tunable adhesion with surface wrinkles 具有表面褶皱的可调粘附力学

IF 2.6 4区工程技术

Journal of Applied Mechanics-Transactions of the Asme Pub Date : 2023-06-07 DOI: 10.1115/1.4062699

Teng Zhang

{"title":"Mechanics of tunable adhesion with surface wrinkles","authors":"Teng Zhang","doi":"10.1115/1.4062699","DOIUrl":"https://doi.org/10.1115/1.4062699","url":null,"abstract":"\u0000 Surface wrinkles have emerged as a promising avenue for the development of smart adhesives with dynamically tunable adhesion, finding applications in diverse fields, such as soft robots and medical devices. Despite intensive studies and great achievements, it is still challenging to model and simulate the tunable adhesion with surface wrinkles due to roughened surface topologies and pre-stress inside the materials. The lack of a mechanistic understanding hinders the rational design of these smart adhesives. Here we integrate a lattice model for nonlinear deformations of solids and nonlocal interaction potentials for adhesion in the framework of molecular dynamics to explore the roles of surface wrinkles on the adhesion behaviors. We validate the proposed model by comparing wrinkles in a neo-Hookean bilayer with benchmarked results and reproducing the analytical solution for cylindrical adhesion. We then systematically study the pull-off force of the wrinkled surface with varied compressive strains and adhesion energies. Our results reveal the competing effect between the adhesion induced contact and the roughness due to wrinkles on enhancing or weakening the adhesion. Such understanding provides guidance for tailoring material and geometry as well as loading of the wrinkled surfaces for different applications.","PeriodicalId":54880,"journal":{"name":"Journal of Applied Mechanics-Transactions of the Asme","volume":null,"pages":null},"PeriodicalIF":2.6,"publicationDate":"2023-06-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46329071","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Bounds on the Poisson's ratios of diamond-like structures 类金刚石结构泊松比的界

IF 2.6 4区工程技术

Journal of Applied Mechanics-Transactions of the Asme Pub Date : 2023-06-07 DOI: 10.1115/1.4062700

Yi Liu, Chunbo Zhang, Hang Yang, Enlai Gao

{"title":"Bounds on the Poisson's ratios of diamond-like structures","authors":"Yi Liu, Chunbo Zhang, Hang Yang, Enlai Gao","doi":"10.1115/1.4062700","DOIUrl":"https://doi.org/10.1115/1.4062700","url":null,"abstract":"\u0000 Poisson's ratios of diamond-like structures, such as cubic C, Si, and Ge, have been widely explored because of their potential applications in solid-state devices. However, the theoretical bounds on the Poisson's ratios of diamond-like structures remain unknown. In this paper, we have derived analytical expressions for the minimum and maximum Poisson's ratios, as well as the Poisson's ratios averaged by three different schemes (i.e., Voigt, Reuss, and Hill averaging schemes). These expressions are based on the correlation between macroscopic elastic constants and microscopic force constants of diamond-like structures, and are solely a function of a dimensionless quantity (λ) that characterizes the ratio of mechanical resistances between angle bending and bond stretching. Based on these expressions, we have determined the bounds on the Poisson's ratios, as well as the minimum and maximum Poisson's ratios, and the Poisson's ratios averaged by the three schemes mentioned above. Specifically, these bounds are (−1, 4/5), (−1, 1/5), (0, 4/5), (−1, 1/2), (−1/3, 1/2), and (−2/3, 1/2), respectively. These results were well supported by atomistic simulations. Mechanism analyses demonstrated that the diverse Poisson's behaviors of diamond-like structures result from the interplay between two deformation modes (i.e., bond stretching and angle bending). This work provides the roadmap for finding interesting Poisson's behaviors of diamond-like structures.","PeriodicalId":54880,"journal":{"name":"Journal of Applied Mechanics-Transactions of the Asme","volume":null,"pages":null},"PeriodicalIF":2.6,"publicationDate":"2023-06-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49204152","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Non-quadratic strain gradient plasticity theory and size effects in constrained shear 约束剪切中的非二次应变梯度塑性理论及尺寸效应

IF 2.6 4区工程技术

Journal of Applied Mechanics-Transactions of the Asme Pub Date : 2023-06-07 DOI: 10.1115/1.4062698

M. Kuroda, A. Needleman

{"title":"Non-quadratic strain gradient plasticity theory and size effects in constrained shear","authors":"M. Kuroda, A. Needleman","doi":"10.1115/1.4062698","DOIUrl":"https://doi.org/10.1115/1.4062698","url":null,"abstract":"\u0000 A previously proposed strain gradient plasticity theory is extended to incorporate a non-quadratic power law function of the plastic strain gradient in the free energy expression with an exponent of N + 1. The values of N are taken to vary from N = 1 to N = 0. A simple shear problem of a metal layer between rigid boundaries is analyzed. Two stages of plastic deformation are considered. In stage I, the plastic strain is taken to be zero at the boundaries. Stage I ends when a specified magnitude of the plastic strain gradient is attained at the boundaries. In stage II, the magnitude of the plastic strain gradient at the boundaries is fixed at the specified value. With N = 0, a critical plastic strain gradient cannot be specified at the boundaries because the plastic strain gradient is infinite at the boundaries. The theory with N = 0 predicts a constant plateau stress immediately after initial yield, and the dependence of the plateau stress on the layer thickness can fit experimentally observed plateau stress values. However, with N = 0, a stress gap occurs between the initial yield stress and the plateau stress. The theory with 0 < N = 1 and with stage II also can reproduce the experimentally observed dependence of the plateau stress on the layer thickness for any value of N in that range, with an appropriate value of critical plastic strain gradient at the boundaries. The solution for 0 < N = 1 includes that for N = 0 as a limiting case.","PeriodicalId":54880,"journal":{"name":"Journal of Applied Mechanics-Transactions of the Asme","volume":null,"pages":null},"PeriodicalIF":2.6,"publicationDate":"2023-06-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44430720","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1

Fracture Resistance of Chemo-mechanically Coupled Solid Solutions 化学机械耦合固溶体的抗断裂性能

IF 2.6 4区工程技术

Journal of Applied Mechanics-Transactions of the Asme Pub Date : 2023-06-07 DOI: 10.1115/1.4062697

Xueju Wang, Mu Lu, Min Zhou, S. Xia

{"title":"Fracture Resistance of Chemo-mechanically Coupled Solid Solutions","authors":"Xueju Wang, Mu Lu, Min Zhou, S. Xia","doi":"10.1115/1.4062697","DOIUrl":"https://doi.org/10.1115/1.4062697","url":null,"abstract":"\u0000 Fracture in solid solutions, such as electrodes for lithium-ion batteries and fuel cells, is mediated by intricate interactions between solid-state diffusion and crack propagation. In this work, we developed a composition-dependent cohesive zone model and integrated it with a chemo-mechanical coupling constitutive model to study the fracture mechanisms of solid solutions. The computational framework was used to investigate the effective fracture properties of chemo-mechanically coupled solid solutions over a wide range of crack growth velocities and compositional dependence of intrinsic fracture energy. The results revealed an important characteristic crack velocity, which is set by the ratio of the diffusivity to the intrinsic fracture energy and dictates the effective fracture resistance of the material. We also applied the model to study the fracture behavior of two-phase lithiated silicon (Si) and germanium (Ge) nanostructures as candidate high-capacity anodes for next-generation lithium-ion batteries, and showed that Ge nanostructures are more fracture resistant than their Si counterparts. The computational study presented here provides important insights for the rational design, operation, and mechanical testing of chemo-mechanically active material systems for their use in energy storage and conversion.","PeriodicalId":54880,"journal":{"name":"Journal of Applied Mechanics-Transactions of the Asme","volume":null,"pages":null},"PeriodicalIF":2.6,"publicationDate":"2023-06-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45320373","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0