International Journal of Structural Integrity最新文献

{"title":"Innovative multi-setup modal analysis using random decrement technique: a novel approach for enhanced structural characterization","authors":"A. Sabamehr, Nima Amani, Ashutosh Bagchi","doi":"10.1108/ijsi-03-2024-0051","DOIUrl":"https://doi.org/10.1108/ijsi-03-2024-0051","url":null,"abstract":"PurposeThis paper introduces a novel multi-setup merging method and assesses its performance using simulated response data from a Finite Element (FE) model of a five-storey frame and experimental data from a cantilever beam tested in a laboratory setting.Design/methodology/approachIn the research conducted at the Central Building Research Institute (CBRI) in Roorkee, India, a cantilever beam was examined in a laboratory setting. The study successfully extracted the modal properties of the multi-storey building using the merging technique. Identified frequencies and mode shapes provide valuable insights into the building's dynamic behavior, which is essential for structural analysis and assessment. The sensor layout and data merging approach allowed for the capture of relevant vibration modes despite the limited number of sensors, demonstrating the effectiveness of the methodology.FindingsThe results show that reducing the number of sensors can impact the accuracy of the mode shapes. It is recommended to use a minimum of 8 sensor locations (every two floors) for the building under study to obtain reliable benchmark results for further evaluation, periodic monitoring, and damage identification.Originality/valueThe results demonstrate that the developed algorithm can improve the system identification process and streamline data handling. Furthermore, the proposed method is successfully applied to analyze the modal properties of a multi-storey building.","PeriodicalId":502514,"journal":{"name":"International Journal of Structural Integrity","volume":"5 10","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141796192","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Sustainability and environmental life cycle analysis of welding processes","authors":"E. Doncheva, Nikola Avramov, Aleksandra Krstevska, Martin Petreski, Jelena Djokikj, Marjan Djidrov","doi":"10.1108/ijsi-02-2024-0024","DOIUrl":"https://doi.org/10.1108/ijsi-02-2024-0024","url":null,"abstract":"PurposeWelding is a widely used manufacturing process in many industries. The process consumes a lot of energy and resources, pollutes the environment, and emits gases and fumes into the atmosphere that are dangerous to human health. There are various welding processes, and the suitable welding process is usually chosen based on cost, material, and conditions. Subjectivity is the most significant impediment to selecting an optimal process. As a result, it is critical to develop the appropriate set of criteria, use the best tool and methodology, and collect sufficient data. This study examines the sustainability of welding processes and their environmental impact.Design/methodology/approachThe welding process’s sustainability was examined and discussed in general, considering the technological specifics of each welding process, physical performance, and environmental, economic, and social effects. The study investigates the environmental impact of MMAW, GMAW, and GTAW/GMAW processes through experimental work and LCA methodology.FindingsMMAW is the most environmentally harmful technology, whereas GMAW has the least impact. The GTAW/GMAW process outperformed the other processes in terms of yield stress, but the analyses revealed that it had a greater environmental impact than GMAW.Originality/valueThe study provides an environmental impact summary and demonstrates the effects of welding parameters and processes. This gives users an understanding of choosing the best welding technique or making the process more environmentally friendly. These recommendations help policymakers identify hot spots and implement the right plans to achieve more sustainable manufacturing.","PeriodicalId":502514,"journal":{"name":"International Journal of Structural Integrity","volume":"8 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141796543","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Optimization of cable-stayed force for asymmetric single tower cable-stayed bridge formation based on improved particle swarm algorithm","authors":"Hui-Zhong Xiong, Xin Yang, Yong-Nan He, Yong Huang","doi":"10.1108/ijsi-04-2024-0066","DOIUrl":"https://doi.org/10.1108/ijsi-04-2024-0066","url":null,"abstract":"PurposeThis paper aims to optimize cable-stayed force in asymmetric one-tower cable-stayed bridge formation using an improved particle swarm algorithm. It compares results with the traditional unconstrained minimum bending energy method.Design/methodology/approachThis paper proposes an improved particle swarm algorithm to optimize cable-stayed force in bridge formation. It formulates a quadratic programming mathematical model considering the sum of bending energies of the main girder and bridge tower as the objective function. Constraints include displacements, stresses, cable-stayed force, and uniformity. The algorithm is applied to optimize the formation of an asymmetrical single-tower cable-stayed bridge, combining it with the finite element method.FindingsThe study’s findings reveal significant improvements over the minimum bending energy method. Results show that the structural displacement and internal force are within constraints, the maximum bending moment of the main girder decreases, resulting in smoother linear shape and more even internal force distribution. Additionally, the tower top offset decreases, and the bending moment change at the tower-beam junction is reduced. Moreover, diagonal cable force and cable force increase uniformly with cable length growth.Originality/valueThe improved particle swarm algorithm offers simplicity, effectiveness, and practicality in optimizing bridge-forming cable-staying force. It eliminates the need for arbitrary manual cable adjustments seen in traditional methods and effectively addresses the optimization challenge in asymmetric cable-stayed bridges.","PeriodicalId":502514,"journal":{"name":"International Journal of Structural Integrity","volume":"40 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141809815","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Optimization of fibre orientation for composite reinforcement of circular hollow section KT-joints","authors":"Mohsin Iqbal, S. Karuppanan, V. Perumal, M. Ovinis, Muhammad Iqbal, Adnan Rasul","doi":"10.1108/ijsi-04-2024-0054","DOIUrl":"https://doi.org/10.1108/ijsi-04-2024-0054","url":null,"abstract":"PurposeComposite materials are effective alternatives for rehabilitating critical members of offshore platforms, bridges, and other structures. The structural response of composite reinforcement greatly depends on the orientation of fibres in the composite material. Joints are the most critical part of tubular structures. Various existing studies have identified optimal reinforcement orientations for a single load component, but none has addressed the combined load case, even though most practical loads are multiplanar.Design/methodology/approachThis study investigates the optimal orientation of composite reinforcement for reducing stress concentration factors (SCF) of tubular KT-joints. The joint reinforcement was modelled and simulated using ANSYS. A parametric study was carried out to determine the effect of the orientations of reinforcement in the interface region on SCF at every 15° offset along the weld toe using linear extrapolation of principal stresses. The impact of orientation for uniplanar and multiplanar loads was investigated, and a general result about optimum orientation was inferred.FindingsIt was found that the maximum decrease of SCF is achieved by orienting the fibres of composite reinforcement along the maximum SCF. Notably, the optimal direction for any load configuration was consistently orthogonal to the weld toe of the chord-brace interface. As such, unidirectional composites wrapped around the brace axis, covering both sides of the brace-chord interface, are most effective for SCF reduction.Originality/valueThe findings of this study are crucial for adequate reinforcement of tubular joints using composites, offering a broader and universally applicable optimum orientation that transcends specific joint and load configuration.","PeriodicalId":502514,"journal":{"name":"International Journal of Structural Integrity","volume":"68 5","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141112050","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Tensile, flexural and free vibration characteristics of sustainable recycled polypropylene filled with spherical SiC through experimental and RVE analysis","authors":"Santosh Kumar Sahu, P. S. R. Sreekanth, Y.P. Deepthi, Quanjin Ma, Tunji John Erinle","doi":"10.1108/ijsi-01-2024-0014","DOIUrl":"https://doi.org/10.1108/ijsi-01-2024-0014","url":null,"abstract":"PurposeThis study aims to investigate the mechanical properties of sustainable recycled polypropylene (rPP) composite materials integrated with spherical silicon carbide (SiC) particles.Design/methodology/approachA representative volume element (RVE) analysis is employed to predict the Young’s modulus of rPP filled with spherical-shaped SiC at varying volume percentages (i.e. 10, 20 and 30%).FindingsThe investigation reveals that the highest values of Young’s modulus, tensile strength, flexural strength and mode 1 frequency are observed for the 30% rPP/SiC samples, exhibiting increases of 115, 116, 62 and 15%, respectively, compared to pure rPP. Fractography analysis confirms the ductile nature of pure rPP and the brittle behavior of the 30% rPP/SiC composite. Moreover, the RVE method predicts Young’s modulus more accurate than micromechanical models, aligning closely with experimental results. Additionally, results from ANSYS simulation tests show tensile strength, flexural strength and frequency within a 10% error range when compared to experimental data.Originality/valueThis study contributes to the field by demonstrating the mechanical enhancements achievable through the incorporation of sustainable materials like rPP/SiC, thereby promoting environmentally friendly engineering solutions.","PeriodicalId":502514,"journal":{"name":"International Journal of Structural Integrity","volume":" 11","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141129867","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Investigation into the interface bond between polyurethane concrete and steel plate","authors":"Yuxuan Wu, Wenyuan Xu, Tianlai Yu, Yifan Wang","doi":"10.1108/ijsi-12-2023-0132","DOIUrl":"https://doi.org/10.1108/ijsi-12-2023-0132","url":null,"abstract":"PurposePolyurethane concrete (PUC), as a new type of steel bridge deck paving material, the bond-slip pattern at the interface with the steel plate is not yet clear. In this study, the mechanical properties of the PUC and steel plate interface under the coupled action of temperature, normal force and tangential force were explored through shear tests and numerical simulations. An analytical model for bond-slip at the PUC/steel plate interface and a predictive model for the shear strength of the PUC/steel plate interface were developed.Design/methodology/approachThe new shear test device designed in this paper overcomes the defect that the traditional oblique shear test cannot test the interface shear performance under the condition of fixed normal force. The universal testing machine (UTM) test machine was used to adjust the test temperature conditions. Combined with the results of the bond-slip test, the finite element simulation of the interface is completed by using the COHENSIVE unit to analyze the local stress distribution characteristics of the interface. The use of variance-based uncertainty analysis guaranteed the validity of the simulation.FindingsThe shear strength (τf) at the PUC-plate interface was negatively correlated with temperature while it was positively correlated with normal stress. The effect of temperature on the shear properties was more significant than that of normal stress. The slip corresponding to the maximum shear (D1) positively correlates with both temperature and normal stress. The interfacial shear ductility improves with increasing temperature.Originality/valueBased on the PUC bond-slip measured curves, the relationship between bond stress and slip at different stages was analyzed, and the bond-slip analytical model at different stages was established; the model was defined by key parameters such as elastic ultimate shear stress τ0, peak stress τf and interface fracture energy Gf.","PeriodicalId":502514,"journal":{"name":"International Journal of Structural Integrity","volume":"94 7","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140079787","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"The influence of CMT-MAG and MAG welding-processes on microstructure and mechanical behaviour of C-Mn E410 structural-steels","authors":"A. Khajuria, Anurag Misra, S. Shiva","doi":"10.1108/ijsi-12-2023-0141","DOIUrl":"https://doi.org/10.1108/ijsi-12-2023-0141","url":null,"abstract":"PurposeAn experimental investigation for developing structure-property correlations of hot-rolled E410 steels with different carbon contents, i.e. 0.04wt.%C and 0.17wt.%C metal active gas (MAG) and cold metal transfer (CMT)-MAG weldments was undertaken.Design/methodology/approachMechanical properties and microstructure of MAG and CMT-MAG weldments of two E410 steels with varying content of carbon were compared using standardized mechanical testing procedures, and conventional microscopy.Findings0.04wt.%C steel had strained ferritic and cementite sub-structures in blocky shape and large dislocation density, while 0.17wt.%C steel consisted of pearlite and polygonal ductile ferrite. This effected yield strength (YS), and microhardness being larger in 0.04wt.%C steel, %elongation being larger in 0.17wt.%C steel. Weldments of both E410 steels obtained with CMT-MAG performed better than MAG in terms of YS, ultimate tensile strength (UTS), %elongation, and toughness. It was due to low heat input of CMT-MAG that resulted in refinement of weld metal, and subzones of heat affected zone (HAZ).Originality/valueA substantial improvement in YS (∼9%), %elongation (∼38%), and room temperature impact toughness (∼29%) of 0.04wt.%C E410 steel is achieved with CMT-MAG over MAG welding. Almost ∼10, ∼12.5, and ∼16% increment in YS, %elongation, and toughness of 0.17wt.%C E410 steel is observed with CMT-MAG. Relatively low heat input of CMT-MAG leads to development of fine Widmanstätten and acicular ferrite in weld metal and microstructural refinement in HAZ subzones with nearly similar characteristics of base metal.","PeriodicalId":502514,"journal":{"name":"International Journal of Structural Integrity","volume":"99 4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139851036","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"The influence of CMT-MAG and MAG welding-processes on microstructure and mechanical behaviour of C-Mn E410 structural-steels","authors":"A. Khajuria, Anurag Misra, S. Shiva","doi":"10.1108/ijsi-12-2023-0141","DOIUrl":"https://doi.org/10.1108/ijsi-12-2023-0141","url":null,"abstract":"PurposeAn experimental investigation for developing structure-property correlations of hot-rolled E410 steels with different carbon contents, i.e. 0.04wt.%C and 0.17wt.%C metal active gas (MAG) and cold metal transfer (CMT)-MAG weldments was undertaken.Design/methodology/approachMechanical properties and microstructure of MAG and CMT-MAG weldments of two E410 steels with varying content of carbon were compared using standardized mechanical testing procedures, and conventional microscopy.Findings0.04wt.%C steel had strained ferritic and cementite sub-structures in blocky shape and large dislocation density, while 0.17wt.%C steel consisted of pearlite and polygonal ductile ferrite. This effected yield strength (YS), and microhardness being larger in 0.04wt.%C steel, %elongation being larger in 0.17wt.%C steel. Weldments of both E410 steels obtained with CMT-MAG performed better than MAG in terms of YS, ultimate tensile strength (UTS), %elongation, and toughness. It was due to low heat input of CMT-MAG that resulted in refinement of weld metal, and subzones of heat affected zone (HAZ).Originality/valueA substantial improvement in YS (∼9%), %elongation (∼38%), and room temperature impact toughness (∼29%) of 0.04wt.%C E410 steel is achieved with CMT-MAG over MAG welding. Almost ∼10, ∼12.5, and ∼16% increment in YS, %elongation, and toughness of 0.17wt.%C E410 steel is observed with CMT-MAG. Relatively low heat input of CMT-MAG leads to development of fine Widmanstätten and acicular ferrite in weld metal and microstructural refinement in HAZ subzones with nearly similar characteristics of base metal.","PeriodicalId":502514,"journal":{"name":"International Journal of Structural Integrity","volume":" 14","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139791232","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Seismic behaviour of the non-straight steel beams in the structural plans","authors":"Farshid Rashidiyan, S. R. Mirghaderi, Saeed Mohebbi, Sina Kavei","doi":"10.1108/ijsi-08-2023-0069","DOIUrl":"https://doi.org/10.1108/ijsi-08-2023-0069","url":null,"abstract":"Purpose This research study focuses on investigating the seismic performance of non-straight beams in steel structures and exploring the mechanism by which plastic hinges are formed within these beams. The findings contribute to the understanding of their behaviour under seismic loads and offer insights into their potential for enhancing the lateral resistance of the structure. The abstract of the study highlights the significance of corners in structural plans, where non-coaxial columns, diagonal elements or beams deviating from a straight path are commonly observed. Typically, these non-straight beams are connected to the columns using pinned connections, despite their unknown seismic behaviour. Recognizing the importance of generating plastic hinges in special moment resisting frames and the lack of previous research on the involvement of these non-straight beams, this study aims to address this knowledge gap.Design/methodology/approachThis study examines the seismic behaviour and plastic hinge formation of non-straight beams in steel structures. Non-straight beams are beams that connect non-coaxial columns and diagonal elements, or deviate from a linear path. They are usually pinned to the columns, and their seismic contribution is unknown. A critical case with a 12-m non-straight beam is analysed using Abaqus software. Different models are created with varying cross-section shapes and connection types between the non-straight beams. The models are subjected to lateral monotonic and cyclic loads in one direction. The results show that non-straight beams increase the lateral stiffness, strength and energy dissipation of the models compared to disconnected beams that act as two cantilevers.FindingsThe analysis results reveal several key findings. The inclusion of non-straight beams in the models leads to increased lateral stiffness, strength and energy dissipation compared to the scenario where the beams are disconnected and act as two cantilever beams. Plastic hinges are formed at both ends of the non-straight beam when a 3% drift is reached, contributing to energy damping and introducing plasticity into the structure. These results strongly suggest that non-straight beams play a significant role in enhancing the lateral resistance of the system. Based on the seismic analysis results, this study recommends the utilization of non-straight beams in special moment frames due to the formation of plastic hinges within these beams and their effective participation in resisting lateral seismic loads. This research fills a critical gap in understanding the behaviour of non-straight beams and provides valuable insights for structural engineers involved in the design and analysis of steel structures.Originality/valueThe authors believe that this research will greatly contribute to the knowledge and understanding of the seismic performance of non-straight beams in steel structures.","PeriodicalId":502514,"journal":{"name":"International Journal of Structural Integrity","volume":"176 6","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139859569","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Seismic behaviour of the non-straight steel beams in the structural plans","authors":"Farshid Rashidiyan, S. R. Mirghaderi, Saeed Mohebbi, Sina Kavei","doi":"10.1108/ijsi-08-2023-0069","DOIUrl":"https://doi.org/10.1108/ijsi-08-2023-0069","url":null,"abstract":"Purpose This research study focuses on investigating the seismic performance of non-straight beams in steel structures and exploring the mechanism by which plastic hinges are formed within these beams. The findings contribute to the understanding of their behaviour under seismic loads and offer insights into their potential for enhancing the lateral resistance of the structure. The abstract of the study highlights the significance of corners in structural plans, where non-coaxial columns, diagonal elements or beams deviating from a straight path are commonly observed. Typically, these non-straight beams are connected to the columns using pinned connections, despite their unknown seismic behaviour. Recognizing the importance of generating plastic hinges in special moment resisting frames and the lack of previous research on the involvement of these non-straight beams, this study aims to address this knowledge gap.Design/methodology/approachThis study examines the seismic behaviour and plastic hinge formation of non-straight beams in steel structures. Non-straight beams are beams that connect non-coaxial columns and diagonal elements, or deviate from a linear path. They are usually pinned to the columns, and their seismic contribution is unknown. A critical case with a 12-m non-straight beam is analysed using Abaqus software. Different models are created with varying cross-section shapes and connection types between the non-straight beams. The models are subjected to lateral monotonic and cyclic loads in one direction. The results show that non-straight beams increase the lateral stiffness, strength and energy dissipation of the models compared to disconnected beams that act as two cantilevers.FindingsThe analysis results reveal several key findings. The inclusion of non-straight beams in the models leads to increased lateral stiffness, strength and energy dissipation compared to the scenario where the beams are disconnected and act as two cantilever beams. Plastic hinges are formed at both ends of the non-straight beam when a 3% drift is reached, contributing to energy damping and introducing plasticity into the structure. These results strongly suggest that non-straight beams play a significant role in enhancing the lateral resistance of the system. Based on the seismic analysis results, this study recommends the utilization of non-straight beams in special moment frames due to the formation of plastic hinges within these beams and their effective participation in resisting lateral seismic loads. This research fills a critical gap in understanding the behaviour of non-straight beams and provides valuable insights for structural engineers involved in the design and analysis of steel structures.Originality/valueThe authors believe that this research will greatly contribute to the knowledge and understanding of the seismic performance of non-straight beams in steel structures.","PeriodicalId":502514,"journal":{"name":"International Journal of Structural Integrity","volume":"270 8","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139799392","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}